Creation of work center CR01 (error message in last page)

Hi
During creation of work center .After all the configuration being done ,in the last page the error message displayed is (ACTIVITY SET CAN NOT BE ALLOCATED TO 2009).
Some of the major setting done in the last page is
This is Costing Lab
1) work Center
2)Activity description (Like set up, Machine and Labouring)
3)Selection of activity type
4)Preferred Unit
Per
After this when i save the error message is displayed mentioned above  (Message number is KL008)
Please help ....!!!!!
Thanks in advance
Rupesh Jha

Dear Rupesh,
1. Please enter the CCtr categories value as "*" in the basic data tab.
1)in KL02 for this particular activity type give as *
2. Enter ATyp category field value ar "1" in the basic data tab.
2) in the field A type mainatin -1
3. Actl Acty Type Cat field value as "As in planning".
in this field also mainatin as 1
YOU MUST SPECIFY A COST ELEMENT FOR ACTIVITY CAT 1
first creat a cost element in  KA01 (pramairy) & in KA06 (secondry)
then asiign in KL02 for the required activity types
Regards
kumar

Similar Messages

  • Previously posted troubleshooting doesn't work for my error message "iTunes could not back up the iPhone because an error occurred".  What other options do I have?

    Previously posted troubleshooting doesn't work for my error message "iTunes could not back up the iPhone because an error occured".  What other options do I have to backup my iPhone data properly?

    Hi there kchagape,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/ts2529
    -Griff W. 

  • TS3276 The links within all my incoming emails don't work.  The error message= No associated application could be found.

    In all my incoming messages, links do not work.  The error message reads=No associated application can be found.  Any hints?

    Open Safari. From the Safari menu bar click Safari > Preferences then select the General tab.
    Select Safari from the pop up menu next to:  Default web browser
    If that doesn't help, launch Disk Utility located in HD > Applications > Utilities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk Permissions
    Restart your Mac when it's finished.
    Try Mail.
    messaged edited by:  cs

  • Cant install Itunes on my work computer, get error message Apple Application support not found, so i uninstall and reinstall again and its the same message

    cant install Itunes on my work computer, get error message: "Apple Application support not found, so i uninstall and reinstall again and its the same message

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
    tt2

  • Latest version of Firefox is having problems loading sites, it tries to load to Google Analytics. No error messages, just a page that won't load. How do I stop this?

    Latest version of Firefox is having problems loading some sites, it tries to load and then gets taken over trying to load Google Analytics. No error messages, just a page that won't load. How do I get rid of this, it is a "pain in the neck"
    == URL of affected sites ==
    http://

    I just spent 3 days with this issue as well. I finally fixed it by reluctantly adding yet another add-on called ADBLOCK
    I was able to selectively block google-analytics. Now pages that weren't loading before are now loading.
    eg vimeo.com starbucks.com & other random sites.
    This was a tough one to fix because there is NO ERROR MESSAGE..page just shows it's loading...forever..& the bottom of my browser says 'waiting for google analytics'. I finally figured out google analytics is the culprit. Ironically, some help pages in trying to find a fix wouldn't load for me due to google analytics arghhh!
    Im on a macbookpro & Safari worked fine for these same sites. It was just Firefox. I nearly switched back to Safari because of this stupid issue.
    I'm wondering if this was caused by recent firefox 'updates'...

  • Error message on all pages SWF

    Error message states: This page contains some SWF objects that may not work properly in the most recent versions of Internet Explorer.  Dreamweaver cannot convert them to the new SWF markups.  Please delete each of them and insert again.
    Now I did have a weather flash in the bottom left corner of this website: http://www.sd22.bc.ca.  It was working fine, and one morning just stopped.
    So I redid the flash code the weather burea provided (was exactly the same code):
    It is :<!-- Begin WeatherLink Flash Fragment -->
    <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=10,0,0,0" width="190" height="125">
        <param name="movie" value="http://dd.weatheroffice.gc.ca/lib/flash/wxlink_e.swf" />
        <param name="FlashVars" value="cityCode=bc-27&amp;siteCode=s0000216&amp;provCode=BC&amp;language=e" />
        <param name="quality" value="high" />
        <embed src="http://dd.weatheroffice.gc.ca/lib/flash/wxlink_e.swf" FlashVars="cityCode=bc-27&amp;siteCode=s0000216&amp;provCode=BC&amp;language=e" quality="high" pluginspage="http://www.adobe.com/go/getflashplayer" type="application/x-shockwave-flash" width="190" height="125" />
    </object>
    <!-- End WeatherLink Flash Fragment -->
    Saved to all the pages through the template.  And it began to work again.
    Seems to me that a day later I was getting the above error message every time I opened any page that was associated with the template.
    What have I done wrong?
    Thanks JD

    I am beginning to think I have done nothing wrong and perhaps it is simply an annoying issue with Dreamweaver.  As I have placed the outside code into another website that has a very similar template with no error messages appearing.

  • I have the ipad2 with the latest Os upgrade.  On certain websites, I get the following error message: cannot open page. Safari cannot open the page because the network connection was lost. I have rebooted, turned off wifi and reset the password.

    This is happening to only certain websites.  Unfortunately, the work ones that I need to access.  I appreciate any help.
    Error message:
    Cannot open page
    Safari cannot open the page because the network connection was lost
    I reset the wifi and the password, I also rebooted several times.

    Do you have any other browsers on your iPad? If you don't have one, why don't you try downloading one of these free browsers - they will all be "lite" versions (not full featured)  - but if you can access these websites with one of those - then I assume that we can point to Safari as being the culprit. That will not solve the Safari problem, but it will give us another point from which to work.
    http://www.google.com/search?client=safari&rls=en&q=free+ipad+web+browsers&ie=UT F-8&oe=UTF-8
    I have Mercury, iCab Mobile, Opera, Dolphin and Atomic. iCab Mobile - the paid version is great.
    BTW ... have you tried to access these sites from another WiFi connection - like a library, a friend's house - any other WiFi network?

  • Acrobat X, error message "cannot delete pages, pages are in use"

    Recently updated to Acrobat X. After saving a pdf, if I try to delete a page or pages, I get an error message "cannot delete pages, pages are in use". I have to close acrobat and reopen my document to continue deleting pages. Is there a fix for this? So far, I think Acrobat 7 was better that X!!!!!!!!!!!!!!!!!!

    What OS are you using?  Ive read that preview pane in windows vista and 7 causes an issue with the delete page feature.  The suggestion was generally to turn the preview feature off.
    Heres technet article on turning off the feature:
    http://social.technet.microsoft.com/Forums/en/itprovistadesktopui/thread/d2a9c302-1ef1-4d9 8-9e81-a88603ae8405

  • Error message when hyperlink page not found

    I have setup hyperlink for one of the field. I would like to display error message when hyperlink page is not exists. Currently it displays standard page not found error.
    Message was edited by:
    user448086

    This sometimes is the result of firewall software protecting you from changed applications. Or it might be something else. Can you review this article and see whether it helps: [[Firefox can't load websites but other browsers can]].

  • Error message of "404 - page not found" after downloading and installing Firefox 15

    Error message of "404 page not found" after downloading the latest version of Firefox.

    This sometimes is the result of firewall software protecting you from changed applications. Or it might be something else. Can you review this article and see whether it helps: [[Firefox can't load websites but other browsers can]].

  • HT4859 Can't backup my Iphone to Icloud. Keep getting error message, "The last backup could not be completed".  Any suggestions?

    I keep getting error message, "The last backup could not be completed" when trying to backup Iphone to Icloud.  I have plenty of storage space.  Phone is plugged in, connected to WI-FI & is locked.  Does anyone know what is wrong?  Thanks

    HELP!  Is there anyone out there who knows how I can fix this????
    Thanks!

  • Customizing message creation in work center

    Hi all,
    we have to change the layout of the message creation window in work center (Web Dynpro Component: AGS_WORK_INCIDENT_CREATE)
    I've tested the enhancment functionality quite a bit, but i was not able to solve the problem.
    Basically we have to add fields to the layout which correspond to the fields in the support message that should be created.
    Example: The support message (ZLFN) contains a field "approver". This field has to be on the screen when creating a message and the value should transported into the created message.
    Can you please tell me the basic points of how to do that.
    Another way i thought about was linking direct to the blank ZLFN message (coressponding to crmd_order), but i could not find a way to do that. Maybe this is possible?
    Any help would be really appreciated.
    Best Regards
    Daniel

    Hello Daniel,
    Please, check the following link:
    https://websmp105.sap-ag.de/~sapidb/011000358700000601362009E/WORKCENTERCUSTGUIDEVALE_EX.PDF
    I hope that this link can help you.
    Best Regards,
    Diego Fischer,

  • Some error in creation of Work Center

    Dear Experts,
    After completely creating the project, I tried to check the chart for scheduling, but to my surprise no dates were appearing and the scheduling chart was also not proper. After lots of permutation and combinations I realised that the work center(RENOV) that I created had some effect(or difference) that the dates and duration was not getting picked up from the internal activity tab on project builder(CJ20N) screen.
    Hence I created a new Work Center (Ren1), which was just a copy of another working Work Center. When I used this work center along with my existing activity (ABCD) I could see the duration appearing in the dates tab and my project could also show proper schedule lines.
    I did side by side comparison of the RENOV and REN1, apparently they are alike in appearance. I am curious to know what could be the reason for this anomaly.
    Thanks
    Manish

    Hi,
    Did you check the  on the Costing tab, whether Validity period of the  Cost Center is correctly showing.
    Thanks
    Dasa

  • Apple Help Center Menu Error Message

    This is about the "Help Center".  When I click on it from an application or from the Finder, I get an error message "The selected topic is currently unavaliable.  Make sure you're connected to the Internet.  For help connecting ..."  etc.  This happens when I AM connected to the internet.  It may or may not bring up a menu with topics, but if I have that and click a topic, I get this message.  So in order to get help I have to come in through the Apple Support website directly.  Am I missing something?  Is there a setting I should be enabling somewhere?

    Thiis is a general fix for not being able to view help menu topics, I don't know if it will work in your case because I'm not familiar with the alret you are getting but it can't hurt to try as these are only cache files.
    From your "Go" menu choose "Go to Folder" then enter ~/Library/Caches
    Delete these items
    com.apple.helpd
    com.apple.helpviewer
    Log out and back in or restart.
    It may be a bit slower the first time until the cache catches up.

  • Aperture help not working - getting JavaScript error message

    My Aperture 3 has been having a lot of strange issues lately, most, but not all of which have been cleared up by holding down command + option while starting up and going through all three of the choices there.
    One problem that remains is the inability to open the Help files. I keep getting the following message:
    “The Help Library requires JavaScript.
    If JavaScript is not enabled, you will not
    be able to view all the content.”
    Help works in all other applications, like Pages and Final Cut Pro. I don’t get JavaScript error messages in any other applications.
    I’ve already done an erase and restore from a Time Machine backup, and an archive and install. I reinstalled Aperture, although not by using the Terminal command suggested in the kbase article # HT3805.
    If I go the Terminal command route, will I lose all my projects, albums, and editing? What about Mobile Me galleries?
    I have a guest user on the computer, and when I log on to that user and open Aperture, the Help Library works fine. So, I know the problem is in my user account somewhere, but I don’t know how to address it. Any ideas?

    Welcome to the forums.
    The fact that you have access to java in another user suggests that it is a local setting or preference.
    In the applications folder/utilities there is an application Java Preferences, try resetting this and seeing if it works.
    If not, try deleting the java preferences file in your users folder
    systemHD/Users/user/Library/Preferences/com.apple.java.JavaPreferences.plist
    relaunch the app Java Preferences which creates a new preferences file for you, then try Aperture again.
    Let us know how this goes.
    Tony

Maybe you are looking for