Creation of Server Proxy for Message interface with External Defination

Dear All,
I am getting a problem while generating a server proxy for the inbound interface . The request message used in the inbound interface is a external definition which is uploaded using a XSD file. The XSD file was supplied by a third party which is having very high complex strucuture and used lot of abstract data types in the design. When i tried to generate the proxy in the R/3 system (Transaction SPROXY) for the inbound interface i am getting following error.
Interface uses external and internal message definitions
Message no. SPRX122 *
Diagnosis
In a message interface you can use messages from different sources:
Message types and fault message types edited in the Enterprise Services Repository
Messages imported into the Enterprise Services Repository (external definitions, RFC, IDoc)
In the current message interface, message types from different sources have been used. Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
System Response
The interface cannot be generated.
Procedure
Change the interface definition accordingly in the Enterprise Services Repository.
Please guide me, how to generate the proxy for the interface with external defination message. I could nt geneate manullay, because it is having very high complexity and its a big structure.
Is there is any way to generate the proxy for interface with external definition
Regards
Vijayanand

Hi,
i. Import your message schemas from external definitions, or RFCs or IDocs from SAP systems. These definitions already contain data types.
ii. Create a message interface and reference the messages of the external definition, or the RFC or IDoc message.
Check this, it may help you
http://help.sap.com/saphelp_nw04/helpdata/en/3f/01623c4f69b712e10000000a114084/content.htm
REgards
Seshagiri

Similar Messages

Generating Proxy in SAP620 for message interfaces with External definitions

Hi,
We need to generate ABAP proxy in SAP 6.20 for a message interface(XI 3.0) based on WSDL definition.As it is not possible to generate the proxies for WSDL in SAP 620,we installed APPINT620(level 5).Still we are unable to generate the proxy.Any ideas to solve this issue?
Thanks in millions,
S.Banukumar

Hi,
We have done a workaround to define the SAP(inbound/outbound) message interfaces manually as a copy of external definition structures.Based on the manually defined message interfaces,we could generate the proxy.By this way we could solve the problem.
Thanks,
S.Banukumar

Creation of client proxy for a WSDL with 2 port types??

Hi,
I am trying to consume an external web service from SAP - ECC6.0. The WSDL file has 2 porttype definitions - one for i/p and one for o/p
When I proceed with SE80 to create a client proxy, it asks me to select any one port type to generate the client proxy. If I select only the input port, it generates proxy for the input port alone.
In this scenario, how do I create proxies and configure logical ports, and call it from a single program to invoke the whole web servie with both i/p and o/p?
TIA,
Regards
Deepthi

Hi,
i. Import your message schemas from external definitions, or RFCs or IDocs from SAP systems. These definitions already contain data types.
ii. Create a message interface and reference the messages of the external definition, or the RFC or IDoc message.
Check this, it may help you
http://help.sap.com/saphelp_nw04/helpdata/en/3f/01623c4f69b712e10000000a114084/content.htm
REgards
Seshagiri

Message interface with two types of message types

Hi experts,
I am having problem that a proxy cannot be generated because of the (mixed) types of the message types that the interface is using.
The first message type is defined in the repository and another is defined as an external definition, imported in from an outside source.
Here is the SAP message I received when I tried to generate the proxy for this interface.
+++++++++++++++++++++++++++++++++++++++++++++
Interface uses external and internal message definitions
Message no. SPRX122
Diagnosis
In a message interface you can use messages from different sources:
1. Message types and fault message types edited in the Integration Repository
2. Messages imported into the Integration Repository (external definitions, RFC, IDoc)
In the current message interface, message types from different sources have been used.
Since messages from these different sources must be handled differently during proxy generation, such a mixture of messages within a message interface is not possible.
System Response
The interface cannot be generated.
Procedure
Change the interface definition accordingly in the Integration Repository.
++++++++++++++++++++++++++++++++++++++++++
The imported xsd is quite large and also contain many large includes. I don't have the option of creating the message type manually.
Any suggestions?
Thank you,
-michelle

Hi all,
I tried several things and the problem is still not resolved. This is what I learned.
First of all, I believed the SAP message about mixing of internal and external message is misleading or even wrong. I tried with both message types being external but I still get the same message that the interface has one internal and the other external message type.
Secondly, since Arvind suggested that I might have used an xml element that is not currently supported by ABAP proxy, I then change to another definition with the most simplest elements. I then attached this other definition to the interface and tried generating the proxy again. I still get the same system message that I am using mixing of message types in one interface.
My conclusion is XI still is not capable of generating ABAP proxy from external definition.
Does anyone have any comments/suggestion/experience on this issue?
Best regards,
-michelle

Error in Trace Level: could not create BPE proxy for message, no XML objec

Hi
We are doing a scenario of File to RFC using BPM and I am getting this errror in Tcode SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for this message; check the activation of the corresponding process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
And getting this error in Trace level
could not create BPE proxy for message, no XML object definition found for message EB32BB50610A11DC9648001321CB837D
Why this error occurs?
What could be in error?
Thanks in advance
Regards
Sami Qureshi

Hi Sami,
Check if thse threads can help u,
Error in BPE Adapter
BPM - BPE_ADAPTER errors
BPE Adapter Error
Exeception during execution error
***********Reward points if helpfull************

Hi. I have a Macbook Pro Model 5,5 with one 800 firewire port. I need to create two firewire 800 ports but only have an SD card slot (this is for video interface with 2 cameras). Is this possible or do I have to have an express card slot in order to do

Hi. I have a Macbook Pro Model 5,5 with one 800 firewire port. I need to create two firewire 800 ports but only have an SD card slot (this is for video interface with 2 cameras). Is this possible or do I have to have an express card slot in order to do this?

Hi Jessica,
No, the SD slot will not work, you need an ExpressCard/34 slot.
I do not know if it works with cameras, but with two or more HDs, if the first one has two FW ports, you can "daisy chain" one or more additional HDs from it.

Error: the QueryInterface call on the COM component for the interface with IID '{00063033-0000-0000-C000-000000000046}' failed due to the following error: Library not registered.

I have a outlook 2007 plugin created in VS 2008 that reads calendar meetings. This plugin also works with outlook 2010. I used to debug this application from VS 2010 as well.
Last month, I installed Office 365 to test something. Later I uninstalled this version but after that my plugin application is crashing, every time a new appointment/meeting is created in calendar.
I get the below error:
Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.Office.Interop.Outlook._AppointmentItem'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{00063033-0000-0000-C000-000000000046}'
failed due to the following error: Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED)).
Tekriti Software

Thanks for your sharing and have a nice day.
Yoyo Jiang[MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

What's the purpose when we config ipv6 address for an interface with 128bit mask

What's the purpose when we config ipv6 address for an interface with 128bit mask?
Thanks

If you configure a loopback-interface you can use a /128 there.
"Normal" interfaces should always use /64 (RFC 4291) while on router-to-router-links you can use a /127 (RFC 6164).
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

Provider proxy error - Service Interface with multiple operations

Hello experts,
I've a synchronous provider proxy scenario using an inbound and outbound service interface.
That service interface contains 3 operations: create, change and delete a table entry.
I created all the necessary repository objects and integration scenario objects.
Next, I generated a provider proxy on the ECC backend system and created an endpoint via SOAMANAGER.
When I test, I get this error:
No implementing class registered for the interface (ABAP interface, request message ...., request message, namespace....)
I currently use a receiver XI adapter in the scenario. Is that ok?
or should I use a receiver SOAP adapter with a SOAP action?
Please advise.
Thanks a lot.
Dimitri

Hi,
Check these
INTERFACE_REGISTRATION_ERROR:No implementing class reg'd for interface
No implementing class registered for the interface
Regards
Seshagiri

Creating a Web Service Proxy for a transaction with Microsoft Visual Studio

Hi experts out there,
I have created a simple transaction which I'd like to call as a webservice. Getting the WSDL from an authenticated browser (from which I started the xMII Workbench) works fine. But when I try to create a Web Reference within my Visual Studio project I only get the following output:
"XacuteWS" Description
Methods
Xacute ( LoginName As string , LoginPassword As string , InputParams As InputParams ) As Rowset
I think this is because my visual studio is not authenticated with the xMII server. So is there any way to achieve this? I have to find a way to generate a .NET proxy for out xMII web services because otherwise it would be too complicated to use the web services from within our .NET applications.
Thanks in advance for any hint on this topic!
Achim

Two comments:
1) The generated proxy looks correct. If you explore the generated code for the InputParams object and the Rowset object, they should represent the incoming and outgoing data structures for your transaction. If not, and if you are returning an XML property type from the transaction, be sure that you have used the "Assign Reference Document" technique to tell MII what the structure of your outgoing document is (there are a few other discussion threads on that topic).
2) Personally, I find it much easier to consume MII services from .NET code using a URL-based technique instead of a SOAP based technique. Invoke the "Runner" servlet (see the documentation) and you'll get an XML document back, that will always be in the MII Rowsets/Rowset/Row format. Also, it is "self describing" because it includes Column metadata information. It is very trivial to load this into a .NET XmlDocument object and parse/process it. In fact, doing a similar approach, I've been able to make MII services appear as ADO.NET tables/stored procedures to .NET code.
Rick

Creation of Material Master for a material with Material Type NLAG

Hello Sirs,
I have to create a material which will be consumed directly. I would use the
material type NLAG (Non stock material). If I create a material with this material type, will it contain an Accounting view where in I can maintain the price of the
material? If it contains an Accounting view, which type of Price control should be
used (Moving average or Standard)? Further, can we maintain an info record for
a material with material type NLAG?How the price updation happens?
Regards
Yoga

Hi Madhu,
Thanks for your reply. But, I have one more doubt. For non stock materials, we
will specify the cost centre and G/L account at the time of creation of Purchase order. Then, do we have to specify the valuation class at the time of creation of
Material Master since there is no automatic account determination?
Regards
Yoga

Example for message-style with Message Driven Bean

hi,
Can i have some examples of webservices message-style with
MDB?....
thanks

The current version of the white-paper that Raffi
 refers to covers through 7.0. For 8.1 see also
 http://edocs.bea.com/wls/docs81/ConsoleHelp/jms_config.html#accessing_foreign_providers
 and
 http://edocs.bea.com/wls/docs81/jms/j2ee_components.html
 these features can often make integration easier.
 Tom
 Raffi wrote:
 > Doug,
 >
 > You can find very detailed information on this topic at the link below. All
 > you need to do is specify the destination-jndi-name, initial-context-factory,
 > provider-url, and connection-factory-jndi-name in weblogic-ejb-jar.xml for the
 > non-BEA JMS provider for that specific MDB.
 >
 > ftp://edownload:[email protected]/pub/downloads/jmsproviders.pdf
 >
 > Hope that helps!
 >
 > Raffi
 >
 > Doug Chew <[email protected]> wrote:
 >
 >>Can someone give me an example on how to setup a message driven bean
 >>with a foreign JMS provider using the foreign JMS provider's implementation
 >>of a connection factory. i.e. binding the foreign JMS provider's connection
 >>factory to the JNDI tree.
 >>
 >>Thanks
 >
 >

Recommendations for audio interface with new mac pro to avoid latency?

Hi friends,
I have a new Mac Pro on order for editing video in FCPX, but Presonus says my older Presonus Firebox won't work with Mavericks and the new Mac Pro. Do you have a recommendation for a replacement?
I only use the interface to drive 2 powered expternal speakers and a headset, so I don't need something super sophisticated.
As I read about units, almost all come with USB 2.0 connections. But the new Mac Pro only offers USB, Thunderbolt 2, Dual Gigabit Ethernet, and HDMI 1.4 Ultra HD inputs. If I can't find a fairly inexpensive audio interface with USB 3.0, I'd have to go through another connection to get into the Mac Pro.
The key for me is to make sure and avoid latency, a critical issue for editing video.
Any advice is much appreciated. Thanks. Duncan

Thanks Mark and Smokerz,
Your point about USB2 working in USB3 ports is something I wasn't aware of. That opens a lot of doors for me. And I'll look into the Yamaha sound board as one possibility.
Thank you both for helping me.
Duncan

Controling a user interface with extern DLL

Hi,
I am currently developing an application that is based on a graphical interface. I divide my code into multiple DLLs. By going this route, I met several problems. I want to know some facts:
1 - from the DLL can I assign values to textbox, read listbox of the GUI:GetCtrlVal (panelHandle, PANEL_TEXTBOX, val); (the GUI is integrating in the project who call the DLL)
2 - I use global variables "extern int" in my files. h and my functions. How do I change this variable declaration when I migrate to the DLL.
If you have any exemple describing how can i control a GUI with extern DLL.
Thanks

Hey Fishingman,
It looks like this post is very similar to your other post on Application Architecture. If this is the case, let's continue this discussion on this thread so that it is easier to follow for anyone else who may be keeping up with this.
To expand on my original response a little though - if you are just looking to be able to modify the user interface in a dll then take a look at this link. It explains how to set up dll function calls to modify a user interface. Again, I wouldn't suggest building your entire GUI through different dlls but it is definitely possible to modify it within a dll.
Regards,
Trey C.

Defining input message Type for webservice interface with out input

Hi all,
I am configuring a scenario RFC -> XI -> Webservice. My sync webservice doesnot need any input. it genrates a random number which needs to be sent back to the RFC. How can i define an input message data type with out any data? As the interface requires both input and output data types in XI?
I tried a dummy data type with a single string input and didn't map it. but its not working because of name space issues. i specified a seperate XML name space in Message Type but i get a Target URL as the name space in the request which i provided in the SOAP reciever adapter.
Any help will be appriciated
Thanks and best regards,
Kulwant Singh

Hi
Can u chk the webservice request using test tools like stylus studio or xml spy and ensure that the same request is going out of XI .
make sure that you have changed the default xml namesapce in the target MT.
rgds
Arun

Creation of Server Proxy for Message interface with External Defination

Similar Messages

Maybe you are looking for