Creation of Invoice List

Hi ,
I am facing problem as While creating the invoice list for particular customer in VF21, and if I am entering say 03 individual invoices. But after saving the invoice list, invoice list is creating 03 invoice list instead of 01.
Kindly help me at the earlist
Thanks in advance
Shailesh

solved

Similar Messages

Baseline date in Accounting document changed after creation of Invoice List

Hi all,
1) User Requirement:-
Creation of Invoice document(using VF01), Transfer u201CGoods Issue Dateu201D to FI accounting as a Baseline date instead of Invoice creation date.
To meet the above requirement I did enhancement name: SDVFX008 user exit: EXIT_SAPLV60B_008.
Its working fine and transfered goods issue date to Accounting(as baseline date) insted of invoice date.
2) Problem:-
After Creation of Invoice List (VF21) system again overwriting baseline date iwith invoice list date.
Does anyone know how to Stop overwriting baseline date in accounting while creation of invoice list.
Thanks & Regards
Sudheer

Hi Valerie,
do you recall the User Exit?
Thanks

Baseline date change after the creation of invoice list

When I create invoice document, the invoice date (vbrk-fkdat) is the end of the month and the invoice list date (VBRK-FKDAT_RL) is the next business day after the invoice date, the baseline date of the accounting document (bseg-zfbdt) is the document creation date and this is what I wanted.
However, when I start to create the invoice list, the baseline date on the accounting document (field bseg-ZFBDT) is changed to the invoice list date. Does anyone know why and how to fix and where to look in the configuration to see how invoice list date (vbrk-fkdat_rl) is populated? It seems to me that the baseline date default back to the invoice list date when invoice list document is created. Thanks for your help. I also posted this question in the ERP Financial thread.

Hi Valerie,
do you recall the User Exit?
Thanks

Some doubts in copy control from billing doc to invoice list

Dear all,
The value of allocation number in FI doc can be customized as: A (PO number), B (Sales order num.), etc.
But how can I make it to be assigned an alternative value (for example, we have do an add-on "invoice" then we hope our invoice no. be assigned here)? Is there an exit to do so? or how this happen (especially when SO's billed, then the FI doc has been generated already.) or how a creation of invoice list will changed the value of allocation number in former FI doc created by billing before?
Thanks to all,
James

Hi, thanks for you reply.
The business scenario as following:
The users create SO. Then post it (VF01) (billing doc and accounting doc. SO and billing is one-one relationship). But at this time, users doesn't generated the customized invoice to customer (also the customer may like to be invoiced with different SO). In order to do this, the user should do invoice list (VF21) to include former billing doc. At this moment, we hope we can update the allocation value in FI doc generated by billing before.
SO->Billing (FI doc generated) ->invoice list (Hope can update some fields in the FI doc).

Invoice List

11.11.2008
Hi Gurus,
a) Does combining of invoices into invoice lists follow the same requirement that the header details should be same in all the invoices to be combined ?
My requirement is creation of invoice lists of multiple invoices of a customer irrespective of the header details i.e Division, Partners, Assignment number ..... These could be different.
Is it possible to combine such invoices??? If so what changes needs to be carried out.???
b) Am i right in concluding there is going to be no accounting entry when an invoice list is generated.
Please share your valuable knowledge.
Sanjay

Hi Sanjay
In Invoice list Payer is same for all invoice ,so for that payer a list of Invoices are sent.
When Head office of an organisation makes the payment for all its branches, instead of sending individual invoices, an "Invoice list" is sent to the Headoffice (PAYER).
Invoice list is of two types .They are LR and LG.
Under LR type Invoice list, all receiviable type of billing document like Invoice(F2) or F1 etc, Debit memo(L2) are listed.
Whereas under LG type of Invoice list, all payable type of billing documents like Credit memo (G2) and Cancellation(S1) are listed.
In the billing type (VOFA), you will find a field called "Invoice list type".
In this field appropriate Invoice list type is filled for respective Billing documents.
For example, if you go to F2, you will find value LR as F2 is a receiviable type of Billing document and so on.
So here, there is no other criterias except PAYER is one for all the branches, that means in the master data head office must have been assigned as their Payer.

Invoice cancellation out of Invoice List

Hi!
As per std SAP invoice list processing, all invoices will go in one invoice list. How can I delete a specific invoice out of invoice list?
Thanks.
Thomas

Hi ,
As per std SAP, once the invoice list is created, it is not possible to delete specific invoice out of invoice list.
You can cancel entire invoice list and create new invoice list excluding the specific invoice. Also there is simulation option available for creation of invoice lists via the work list for invoice lists.
Hope this will help.
Thanks,
sanjay

Unable to create the Invoice list

Hi
We are recently went to go live. We have an issue related to the Invoice list. The issue is like this..........
1. User wasnot maintained the information in Payer master data(Invoice list date & invoice dates).
2. He created the sales order, delivery & Billing for around 100 billing docs for the same payer.
3. Now he is asking for the Invoice list for the 100 billing documents.
Anybody can guide how we can able to create the Invoice list.
Thanks in advance.
With Regards
Ravi Kumar.T.N.

Hi Ravi,
1. Assign the billing document types to the Invoice list type in customizing.
IMG --> SD --> Billing --> Invoice Lists --> Assign Invoice List type to Each billing type
Note that there are basically 2 standard types of Invoice lists, LG and LR. Select the billing document and assign to relevant Invioce List type [LG/ LR]
2. Maintain Invoice List dates in Customer master [Payer] billing tab.
3. Maintain the pricing condition types RL00 and MW15 in the relevant pricing procedure.
4. Maintain out put condition records for LR00 and RD01 [for Printing Invoice list]
5. After creating more than one billing docs, use T-code VF21, select the billing docs and execute. This will result in creation of Invoice list.
Regards,
Rajesh

How to create Invoice list??

Hi guyz,
could you please tell me how to create invoice list, i have created sales order, done the delivery,created billing.
appreciate immediate reply.
Thanks.
Mohammed.

Hi Mohammed,
To create an invoice list:
Select the Billing screen.
Depending on the number of billing documents that you want to include, you can choose one of two ways to create the invoice list. You can either
· Select Invoice list Create and enter each billing document separately
· Create a list for all billing documents that are relevant for the invoice list. You can then process the work list for invoice lists.
This procedure shows you how to create the work list.
Select Invoice list Edit work list.
Enter your selection criteria and press ENTER.
The system displays a list of billing documents that meet your selection criteria.
Select the billing documents that you want to include in the invoice list and select Invoice list Save.
You can also simulate creation of invoice lists via the work list for invoice lists. This is useful as a test option. The simulation also allows you to carry out a split analysis, which shows you why billing documents are written to different invoice lists (e.g. due to different payers).
Prerequisites
You can only process invoice lists if the following prerequisite data is defined by your system administrator in Customizing for Sales:
Condition type RL00 (factoring discount) must be maintained and, if required, also the condition type MW15.
An invoice list type must be assigned to each billing type that you want to process in invoice lists. The standard version of the SAP R/3 System includes two types of invoice lists: LR for invoices and debit memos, LG for credit memos.
Copying requirements must be defined (for example, the payer, terms of payment and other fields that must be identical in the documents to be included in the invoice list)
In addition, before you process an invoice list, you must maintain the following master data:
A customer calendar must be defined, specifying the time intervals or dates on which invoice lists are to be processed.
The customer calendar must be entered in the Billing Sales Area view of the customer master record.
Pricing condition records for the condition type RL00 and, if necessary, (e.g. in Germany) the condition type MW15 must be maintained.
Output condition records for condition types LR00 and RD01 must be created.
Hope with this info you can do it. Pl. reward if it helps.
Thanks & Regards
Sadhu Kishore

Baseline date change after creation invoice list

When I create invoice document, the invoice date (vbrk-fkdat) is the end of the month and the invoice list date (VBRK-FKDAT_RL) is the next business day after the invoice date, the baseline date of the accounting document (bseg-zfbdt) is the document creation date and this is what I wanted.
However, when I start to create the invoice list, the baseline date on the accounting document (field bseg-ZFBDT) is changed to the invoice date. Does anyone know why and how to fix and where to look in the configuration to see how invoice list date (vbrk-fkdat_rl) is populated? It seems to me that the baseline date default back to the invoice list date when invoice list document is created. Thanks for your help.

Hi
You need to check your payment terms. the baseline date is determined from the payment terms, which is assigned to the vendor. You can use OBB8 to see the config of payment terms.
Regards
Sanil Bhandari

User exit for invoice list creation?

Hello!
We have some customers who have multiple ship to locations but the same payer and Bill to. For some ship to locations they want an invoice list and for the other locations, individual invoices only - their process of getting the invoices validated by the delivery locations varies from location to location, hence this request. Is there any possibility by way of a user exit or any other modification to prevent bills based on the partner function SH (via some entry in a designated field in the customer master of the SH) to not go on the invoice list even though the payer may have invoice list calendar populated in the master? i.e. the bill that creates for that particular ship to, does not get the field FKDAT_RL populated even though the Payer may have the invoice list calendar in it? For the SH which don't have this field populated, we want those bills to go on the invoice list.
Appreciate any guidance/help.
Many thanks.

Hi Manoj, that's a very simple question. Before you save data, that record will not even exist in LFA1 table. so, you just need to check that table for the record. In case it doesn't exit, just give an error message.
inclue some code in the user exit. something like
if sy-tcode eq 'MK01'.
select single from lfa1 where lifnr eq ???-lifnr. "check field name in exit
    if not sy-subrc eq 0.    "record doesn't exist
       message E 'Record ..........'
    endif.
endif.
if you want to use authorization, just include a mandatory field in a field group, like name1 (vendor name, you can create a vendor without a name) and that will only be open for maintenance for those who have the corresponding authorization value. Therefore, those who have authorization to create a vendor can create it using XK01/MK01/FK01, but those who can only maintain purchasing data cannot create a new vendor record.

Invoice List data(VF21/VF22) as IDoc

Hi,
We have a typical scenario of converting Invoice List data in SAP into IDoc and to transmit it as an XML to the third party system. In the data to be transmitted, sub-totalling at the material (in the invoice items) and material+invoice date level is required and the sub-totals are to be populated in two kind of segments (for each of the sub-total type) in the IDoc.
That is, a new IDoc structure will be defined with the segments/fields that the customer wants viz., a header segment with only few fields from the invoice list header, an item segment with only few fields from the invoice list item, and a sub-total segment with two fields, each to hold sub-total at material and material+date level respectively.
We have output types which, when assigned in the invoice list should create the required Idocs.
Invoice lists will be created for several partners, but each list will have only one partner.
What are the steps to be carried out in order to achieve this objective? Please stress upon the FM parameters to be provided and NACE options to be selected.
Vish.

Hello ,
Your requirement is very simple ,However before posting into sdn please do a proper search on idoc.
Now coming to your requirement as of now you have the invoice data coming up.
1. In the NACE transaction create an output type related with the respective partner data.
2.Create segments with the required fields and set its status to release.
3.create Idoc type and message type ..link the message and segents.
4.Now link the message type and idoc type .
5.
6. Now assign process code to the partner function by defining a logical system and in the process code
put your custom function module where you put your custom code which will filter and
cumulate the data coming from the invoice into different fields
using normal abap code,
Now once you are done with the abap coding the
function module has few parameters which you can pass them as it is .
control_in need to be passed to Control_out as it is.
Now fill the segments with the required data and append the segment data to the
EDI_DATA structure which is a exporting parameter for thefunction module .
Now once you execute the invoice using this partner function and message type
system would internally call the custom function module which you have assigned to
the process code and would create an idoc.
also go through saptechnical-com site for addition details on idoc creation.

Invoice List - Calculation of the Billing Date

Hello,
I'm facing some problems by setting up the invoice lists in our system. I added a factory calendar to the customer who has to receive invoice lists and the field VBRK-FKDAT_RL is filled so I'm able to create the list.
My problem now is, that the system will ever use the Billing Date of the Real Invoice also as Billing Date for the Invlice List and if I try to create a list for e.g. four invoices created on four different days I will receive four Invoice Lists instead of one.
How can I control the billing date for the invoice list so that, e.g. the customer receive an invoice list for every quarter? Or monthly? Or..?
Thanks in advance for your help.
Kind regards
Sascha

Hello,
I know this is an old thread, and you were able so solve your problem.
Neverthless, since I had more or less exactly the same problem and was only able to solve it, for e.g. a weekly periodicity after some try and error, I wanted to present the solution for this invoice list periodicity:
Valid From      Valid To     Workday           Text
01.05.2014 06.05.2014    (not checked)    First week May
08.05.2014 13.05.2014    (not checked)    Second week May
... and so on.
It is important to EXCLUDE the day in the definition of the weekly periods, that the is supposed to be the next available invoice list date, which is then filled in the invoice Header (FKDAT_RL in VBRK) at the time of invoice creation.
At the same time I have all work days checked in the first screen of factory calendar maintenance.
Hope this is helpful for people running into the problem.
Cheers,
Steffen

Error in cancelation of invoice list

when i am doing a cancelation of credit memo list i am getting an error message saying credit memo cannot be invoiced with billing type LGS
in configuration - <i>Assign Invoice list type to each billing type</i> - invoice list type LGS is not assigned to billing type credit memo so i assigned it there.
but when i'm doing the cancelation again, the error is still there...
Please help on how i can solve the issue.
tia

now it is not possible . U have to do it manually now .
Because u did the changes in config after creation of doc . So the same will not be updated in the already created doc.
Hope this help

SD Billing - Avoid Cancellation Creation if Invoice has not been posted yet

Dear all,
I have noticed this problem in my company system.
Problem descripion:
- you creates an invoice and the system doesn't post it for any reason
- then you create the cancel of the invoice, BEFORE forcing the posting of the invoice
--> user creates Cancel, Cancel is not posted as well.
--> from now it is impossible to post both invoices: if you try to post the Invoice after the cancel creation, the VF02 recongnise that a CANCEL exists and do not allow for the posting
--> standard VFX3 doesn't signal this kind of not posted documents situation.
Ok, The right procedure for thes user should be: create invoice, if not posted then try to understand why not posted, and not CANCEL it.
But in this case VFK3 was not able to detect the invoice was not posted: it was not in the list.
So the 2 ways must be:
1) one possibility could be undestand in VFX3 could be enhanced: I checked in OSS but I didn't find anything.
2) other possibility: add a further check in interface between SD and FI in order to check if original invoice is not posted to FI and in this case block the cancel creation, as instead standard SAP does.
Could you please give me an idea on how it would be better proceed?
Thank You very much.
Raffaella

Dear,
thank you for your feedback.
in VOFA the flag is not ticked.
The problem was that In VFX3 no data were found for the specified document (with all "Inclomplete Due To" check box flagged), even if invoice and relative cancel were already created, but not posted.
When we tryied to to post them, via VF02 for example, the system didn't warned anything specific and, doing the posting via debug, we discovered that the posting was stopped because VBRK-RFBSK = E = "Billing Document Cancelled".
So, forcing via debug that value = ' ', because of the urgency of Finance Office, we could invoice it and then do the same for its cancel.
So at the moment it is not possible for me to reproduce the error in the system.
The only workaround I can imagine, is to find a way to avoid cancel creation if invoice is not posted yet.
Do you think this is feasible way?
Thank You veyr much for your suggestions.
KR
Raffaella
Edited by: Raffaella Sacchetto on Nov 29, 2010 3:43 PM

Diffrence between the billing document and Invoice list

Dear all,
I have that we create the billing document from vf01 but there is invoice list also which we can create from vf21,so i wanted to know that whats the diffrence btw the these both?
Thanks & Regards,
Mohsin

Billing represents the final processing stage for a business transaction in Sales and Distribution. Information on billing is available at every stage of order processing and delivery processing.
This component includes the following functions:
Creation of:
Invoices based on deliveries or services
Issue credit and debit memos
Pro forma invoices
Cancel billing transactions
Comprehensive pricing functions
Issue rebates
Transfer billing data to Financial Accounting (FI)
The invoice list lets you create, at specified time intervals or on specific dates, a list of billing documents (invoices, credit and debit memos) to send to a particular payer.
The billing documents in the invoice list can be single or collective documents (collective invoices combine items from more than one delivery).
The standard version of the SAP R/3 System includes two types of invoice lists:
for invoices and debit memos
for credit memos
If you wish, you can process invoices, debit memos, and credit memos at the same time. The system automatically creates a separate invoice list for credit memos.
A payer may be the head office of a buying group, which pays all the invoices for goods that are shipped to individual members. The group payer takes responsibility for paying the invoice lists and then collecting payment from the individual members. In return for these services, the group payer usually earns a factoring or del credere discount.
Depending on the tax structure of the payer's country, the payer may be liable to pay taxes on factoring discounts that he earns. In Germany, for example, factoring discounts are taxed at the standard rate of 15%. During invoice list processing, you can reimburse the payer in advance for this tax liability by creating special condition records.

Creation of Invoice List

Similar Messages

Maybe you are looking for