Creation of Microsoft Azure Website failed. The application already exists

Trying to create a new website, I get this error:
Creating Microsoft Azure Website
Creation of Microsoft Azure Website failed. The application already exists. The remote server returned an unexpected response: (409) Conflict.
I succeeded to create this website earlier on and then I deleted it as I didn't need it anymore.
Now I want to create it again but I get this error even though I've deleted all websites, hosting plans, cloud service, etc from my Azure account.
Any idea on how to fix this?

At this point, I don't know how it happened, but we'll need to dig deeper. I believe there is a sequence that can cause problems if you create a site via Current portal and delete it via Preview, but I'm not sure.
BTW, it seems you have 2 other sites that may be in the same situation (deleted in a way that you couldn't recreated them). They're 'shortl...dev' and 't..d' (not giving full name to avoid squatters!). Do you think you'll want to recreate them later? If
so, we can do the same maneuver to get back to a good state.

Similar Messages

Creation of Microsoft Azure Website failed. Cannot move or create server. Subscription ' id ' will exceed server quota.

I'm trying to create a new MVC website with azure cloud server. However, when creating my project/solution in visual studio I get the following error.
Creation of Microsoft Azure Website failed. Cannot move or create server. Subscription '<id>' will exceed server quota.
During the day I created several MVC projects, as a learning exercise, and it worked fine. Now it's failing every time I create a new MVC website with Azure.
Every time I created a website, I have always deleted any generated Azure sites and databases via the management portal. Currently I have no websites in Azure. Thus I don't see how I've reached a quota,
Any ideas what might be going wrong?
My subscription is pay as you go.
Thanks for your time,
Rob

Hi,
It might be due to various other resources (sql DB, application insight, etc) that you may have created while deploying earlier websites, and filled up your Quota. Due to which, creating new resources would exceed the quota limit.
Check for the unused resources and clear them. It may clear the error and allow you to create new websites.
Otherwise, It should be an Account related issue than Technical issue. I suggest you contact Azure support, it is a best choice for you, Please contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/
Regards,
Manu Rekhar

HFM deployment issue on EPMA - The application already exists

The first time I deploy the HFM application everything works fine until I try to redeploy after deleting the application. I have tried registering the application to SS and then try deleting it from there but that does not work. Here is my deployment abort details:
Submitted Time : Saturday, March 21, 2015 3:38:22 PM
Last Updated Time : Saturday, March 21, 2015 3:38:33 PM
User Name : hypadmin
Process Name :
Thread : 0
Server :
Detail : Initiating Product Action...
Generating Headers and Callback Information...
Generating Application Data...
Posting Product Request...
Waiting For Status Updates...
PRODUCT_UPDATE: Update from product
Financial Management is transforming metadata from EPMA...
Creating Application...
The application already exists.
Please help and thank you.
Gideon Seroney

Got around this issue by creating a classic application over the epma app, provision admin then delete it from consolidation admin.
Unfortunately it seems that the epma application should never have been registered like a classic app. Always perform 'deploy' and never 'register' since it get stuck in SQL data tables. Unless you are a DBA I would not suggest monkeying with the tables to begin with.
Thanks!

Error : Import Security Failed - The application is invalid.

I am getting the following error while importng security in planning through secfile.txt
Error : Import Security Failed - The application XPLAN is invalid.

John:
Here is the error i am getting while extracting the security from planning
D:\Hyperion\Planning\bin>ExportSecurity.cmd /A=XPlan,/U=admin,/P=Pwd
Unable to get JDBC driver oracle.jdbc.driver.OracleDriverjava.lang.ClassNotFound
Exception: oracle.jdbc.driver.OracleDriver
java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.hyperion.planning.HspJDBCPool.<init>(Unknown Source)
at com.hyperion.planning.sql.HspSQLImpl.connectToJDBC(Unknown Source)
at com.hyperion.planning.sql.HspSQLImpl.<init>(Unknown Source)
at com.hyperion.planning.utils.HspJSHomePropsFactory.createHomeInstance(
Unknown Source)
at com.hyperion.planning.utils.HspJSHomePropsFactory.createHomeInstance(
Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.loadProperties(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.<init>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
at com.hyperion.planning.HyperionPlanningBean.<init>(Unknown Source)
at com.hyperion.planning.utils.HspExportSecurityCmd.execute(Unknown Sour
ce)
at com.hyperion.planning.utils.HspExportSecurityCmd.main(Unknown Source)
Unable to create JDBC connection. java.sql.SQLException: No suitable driver
Unable to set Planning's Oracle connection numeric character to '.'. java.lang.N
ullPointerException
Can not set database catalog name, skipping set of catalog name: CAT_NAM
Can not get JDBC connection.
Unable to create JDBC connection. java.sql.SQLException: No suitable driver
java.lang.Exception: No object were successfully created. This can be caused by
any of the following: The OLAP Server is not running, The DBMS is not running, t
he DBMS is running on a different machine that the one specified, the name and p
assword provided were incorrect.
at com.hyperion.planning.HspPool.getObject(Unknown Source)
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.utils.HspJSHomePropsFactory.createHomeInstance(
Unknown Source)
at com.hyperion.planning.utils.HspJSHomePropsFactory.createHomeInstance(
Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.loadProperties(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.<init>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
at com.hyperion.planning.HyperionPlanningBean.<init>(Unknown Source)
at com.hyperion.planning.utils.HspExportSecurityCmd.execute(Unknown Sour
ce)
at com.hyperion.planning.utils.HspExportSecurityCmd.main(Unknown Source)
Unable to set Planning's Oracle connection numeric character to '.'. java.lang.N
ullPointerException
Can not set database catalog name, skipping set of catalog name: CAT_NAM
Exception while trying to load HspJSHome.properties: Connection was null
Unable to create JDBC connection. java.sql.SQLException: No suitable driver
java.lang.NullPointerException: Connection was null
at com.hyperion.planning.sql.HspSQLImpl.executeQuery(Unknown Source)
at com.hyperion.planning.sql.HspSQLImpl.executeQuery(Unknown Source)
at com.hyperion.planning.utils.HspJSHomePropsFactory.createHomeInstance(
Unknown Source)
at com.hyperion.planning.utils.HspJSHomePropsFactory.createHomeInstance(
Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.loadProperties(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.<init>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
at com.hyperion.planning.HyperionPlanningBean.<init>(Unknown Source)
at com.hyperion.planning.utils.HspExportSecurityCmd.execute(Unknown Sour
ce)
at com.hyperion.planning.utils.HspExportSecurityCmd.main(Unknown Source)
Unable to set Planning's Oracle connection numeric character to '.'. java.lang.N
ullPointerException
Creating rebind thread to RMI
Can not set database catalog name, skipping set of catalog name: CAT_NAM
java.lang.IllegalArgumentException: JDBC driver cannot be null
at com.hyperion.planning.HspJDBCPool.<init>(Unknown Source)
at com.hyperion.planning.sql.HspSQLImpl.connectToJDBC(Unknown Source)
at com.hyperion.planning.sql.HspSQLImpl.<init>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.<init>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
at com.hyperion.planning.HyperionPlanningBean.<init>(Unknown Source)
at com.hyperion.planning.utils.HspExportSecurityCmd.execute(Unknown Sour
ce)
at com.hyperion.planning.utils.HspExportSecurityCmd.main(Unknown Source)
java.lang.NullPointerException: Connection was null
at com.hyperion.planning.sql.HspSQLImpl.executeQuery(Unknown Source)
at com.hyperion.planning.sql.HspSQLImpl.executeQuery(Unknown Source)
at com.hyperion.planning.utils.HspJSHomePropsFactory.getApplicationsForC
luster(Unknown Source)
at com.hyperion.planning.utils.HspJSHomePropsFactory.getApplications(Unk
nown Source)
at com.hyperion.planning.utils.HspJSHomePropsFactory.createAppsInstance(
Unknown Source)
at com.hyperion.planning.utils.HspJSHomePropsFactory.createDecryptedApps
Instance(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.<init>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
at com.hyperion.planning.HyperionPlanningBean.<init>(Unknown Source)
at com.hyperion.planning.utils.HspExportSecurityCmd.execute(Unknown Sour
ce)
at com.hyperion.planning.utils.HspExportSecurityCmd.main(Unknown Source)
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.<init>(Unknown Sou
rce)
at com.hyperion.planning.HspJSHomeImpl.<init>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getStaticHome(Unknown Source)
at com.hyperion.planning.HyperionPlanningBean.<init>(Unknown Source)
at com.hyperion.planning.utils.HspExportSecurityCmd.execute(Unknown Sour
ce)
at com.hyperion.planning.utils.HspExportSecurityCmd.main(Unknown Source)
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Unable to find JDBC_CATALOG key for application: XPlan
com.hyperion.planning.InvalidApplicationException: The application XPlan is in
valid.
at com.hyperion.planning.HspJSHomeImpl.createHspJS(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.getHspJSByApp(Unknown Source)
at com.hyperion.planning.HyperionPlanningBean.Login(Unknown Source)
at com.hyperion.planning.HyperionPlanningBean.Login(Unknown Source)
at com.hyperion.planning.utils.HspExportSecurityCmd.execute(Unknown Sour
ce)
at com.hyperion.planning.utils.HspExportSecurityCmd.main(Unknown Source)
the prop file is ok and the catalog name and dsn is fine in Oracle.
The Oracle is running on a diff server.

My computer was hacked I had to install an earlier version of the disc provided for my mac and I have lost all of my applications already existing on my mac including iPhoto, and all other application. I am wondering how to get them back? I am in Japan

My computer was hacked using a softbank pocket wifi, I had to install an earlier version of the disc provided for my mac reset my user password and I still need to recover my administrator password that was altered. I have lost all of my applications already existing on my mac including iPhoto, and all other applications. I am wondering how to get them back? I am in Japan and I have proof of purchase in my iTunes, but on my computer all the allplications are blocked. I have no idea what to do to get them back. It is very annoying.
Thank you for your help.
Erika K.

Reinstall from the original source - the restore disks that came with the computer or from the App store if the computer did not come with disks
LN

Can i use the maps application already existing on my i phone in an offline mode?

can i use the maps application -already existing in iphone 4- in an offline mode?

No. It downloads the maps as it needs them.
A very small portion of the map is cached in memory when offline, so you can see the last area you looked at, but as soon as you want to move the map, or look elsewhere it will need an internet connection to download from Google.
There are standalone map apps available in the AppStore if you search for the area you want.

Why does appimp fail with "id already exists?"

After upgrading to a recent release of Portal on 8i, we have to use the appexp utility to export Portal objects. We exported an entire application and then dropped it. When we try to run appimp to put it back we get errors that objects will fail because "ID already exists". We found note 168309.1 on Metalink but it didn't give us a fix. Has anybody else encountered this and maybe found a solution?
Thanks in advance
Ron

This may be happenning due to some residual data in the wwv_modules$ table pertaining to the application you want to export. Delete the residual data and the try re-importing.

The sorting already exists error

Hello,
When I try to dynamically sort Crystal Report in ASP.NET application, I'm getting error "The sorting already exists" if I sort by the fields that had been used before.
I've found an article in the KB - 1218210 - stating that this was a bug in CR 10. But I'm using CR 2008. How to get rid of this error? Is there a way to clear previous sort?
Thank you,
Peter

is the report already grouped or sorted?
that maybe the problem

HT1349 I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

Leigh...
but cannot do this because I cannot access Mac App Store
If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
It's ok to do this even you are already running v10.6.8.
Plants vs. Zombies, and that is all for additional software on here
FYI: Some third party software can cause issues with the App Store > Mac App Store: Sign in sheet does not appear, or does not accept typed text
Apple is not responsible for incompatibility isssues with third party software.

PSE 9 and 5 will not import - says the file already exists in the catalog !

I've already wasted 2 days looking for answers to this. When someone buys this program, at least half of the price is paying for the database in the Organizer - yet even John Ellis himself, who seems to know more than anyone about it, has gone to Lightroom. This is bad coding!!!
Upgraded from 5 to 9. If you read my previous posts, this took 2 days too, and phone help from a tech, because it would not install in my XP computer. It did upgrade the Organizer from 5, although many of the symbols are unusable and don't work to help me identify my tags. However, now I see that neither 5 nor 9 is able to look at a file and display thumbnails that are in it.
I move files around a lot for my business. Any half-way good database should be able to find the missing files, and also add any new images. Say I have 10 images in file A, then add 2 more to make 12. It can't see the added images! Says can't import, the file already exists in the catalog.
I tried: updating thumbnails, recover, repair, in both 5 and 9 - nothing works. to import the images that I can SEE in these folders! I read here that it will not import files if the same name is somewhere else. That alone is a problem. But I think it's more than that: even if the file used to be in another folder, folder B, it won't recognize that it's in folder A now!
Since PSE9 uses sql db, shouldn't that be better than 5 and be able to do simple tasks like this?
Any advice or similar experiences eagerly welcomed.

Thank you for replying, dj paiqe.
Do you mean the first little section that says photos may not be displaying? Yes, those just reveal hidden photos and are very basic. I did them.
I guess we disagree about databases and what they are designed to do, or maybe I didn't explain this well.
I did not move the images outside of the catalog: I move them to various folders, all already imported WITHIN the catalog, as I send them to various editors. (these are all drawings, not photos, and I do this professionally, so it needs to work).
Folder A and Folder B and Folder C have already been imported into the catalog. So if I move 2 images from folder B into folder A, the Organizer is simply lost, says image already exists, and everything is totally screwed up, as the image is no longer in folder B, and it can't find it in folder A!!! The problem is, unless I memorize the image name, say Image 9, I can't tell it to reconnect, as there is no longer an image in front of me! So there are 2 images, without names, now nowhere to be found. Inefficient, to say the least.
I've never tried Lightroom or Filemaker, but I cannot believe that they would lose data like this. I think it's the Folder coding that's not working in PSE, and I wanted this to work so badly!!!!!
I am willing to do it the PSE way, since you now have captions, keywords, etc, and it is a very powerful database, when it works. I understand that one is supposed to move images within the Organizer, obviously. But now many images are disconnected. I could start all over importing, but is there any way to do that without losing tags and categories?

How to check if the file already exists in the client directory

Hi all.
I'm on devsuite 10g. I'm using webutil to download files from DB using webutil function db_to_client.
What I need is to check if the file already exists in the client directory and if yes to display a message to ask the user if he wants to overwrite or no. How can I make this???
Here is the code that I'm using to download the file.
Thanks all for the collaboration.
Fabrizio
declare
file_path varchar2(2000) := null;
BEGIN
/** I ask where saving the file on the client machine **/
file_path:= webutil_file.file_selection_dialog
(directory_name => null,
file_name => :bin_docs.name,
file_filter => '',
title => 'Saving file',
dialog_type => save_file, --save_file
select_file => TRUE);
/** I download the file from DB to client **/
if webutil_file_transfer.DB_To_Client_With_Progress
( file_path ,
'BIN_DOCS',
'DOC' ,
'doc_id = '||:bin_docs.doc_id,
'Downloading file',
' '||:bin_docs.name) then
msg_alert('Download del file avvenuto con successo','I',false);
else
msg_alert('Si è verificato il seguente errore in fase di download '||SQLERRM,'I',false);
end if;
end;

How about something like the below:
Note: I have a yes/no alert to asking if they want to over-write the existing file.
DECLARE
file_path VARCHAR2(2000) := null;
over_write BOOLEAN := TRUE;
BEGIN
/** I ask where saving the file on the client machine **/
file_path:= webutil_file.file_selection_dialog
(directory_name => null,
file_name => :bin_docs.name,
file_filter => '',
title => 'Saving file',
dialog_type => save_file, --save_file
select_file => TRUE);
IF webutil.file_exists(file_path) THEN
/** check a file by the same name exists in the selected directory **/
IF show_alert('Ask_overright') != alert_button1 THEN
/** If we say no then set over_write value to false **/
over_write := FALSE;
END IF;
END IF;
IF over_write THEN
/** I download the file from DB to client **/
IF webutil_file_transfer.DB_To_Client_With_Progress
( file_path ,
'BIN_DOCS',
'DOC' ,
'doc_id = '||:bin_docs.doc_id,
'Downloading file',
' '||:bin_docs.name) then
msg_alert('Download del file avvenuto con successo','I',false);
ELSE
msg_alert('Si è verificato il seguente errore in fase di'
||' download '||SQLERRM,'I',false);
END IF
END IF;
END;
cheers
Q

Additional information: The sorting already exists

I am using VB .NET 2003 and Crystal Report XI.
The report has two sorting fields and I want to change the sorting order through programming. It has been working well until my computer died. After I got a new computer and set up everything, restored the source code from Source Safe, now everytime I try to change the sorting I get this error
An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in crystaldecisions.crystalreports.engine.dll
Additional information: The sorting already exists
Here is the code causing this error:
obj1.DataDefinition.SortFields.Item(0).Field = FieldDef
Where obj1 is a ReportDocument.
Does anyone know what is going on?
Thanks,
Alex

Hi, Alex;
I am not sure what the cause could be.
If you try a different report do you get the same results?
Have you installed the latest Service Pack for CR XI?
Regards,
Jonathan

[svn:fx-trunk] 14009: DataGroup.getVirtualElementAt() needs to revalidate the element when the IR already exists but the data changes .

Revision: 14009
Revision: 14009
Author:   [email protected]
Date:     2010-02-05 12:53:05 -0800 (Fri, 05 Feb 2010)
Log Message:
DataGroup.getVirtualElementAt() needs to revalidate the element when the IR already exists but the data changes.
The element also needs to revalidate if it is resized, whether or not the IR existed before. This wasn't part of the bug but Hans realized this when he did the code review.
QE notes:
Doc notes:
Bugs: SDK-25354
Reviewer: Hans
Tests run: checkintests
Is noteworthy for integration:
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25354
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DataGroup.as

Please can u answer it fast

Certificate for Azure Websites in the VNET

Hi,
I created a point-to-site connectivity from Azure websites to existing VNET. My Questions are:
1. Eventhough I add more than one website the client count in the Dashboard of the VNET is not showing increment more than 1. What is the reason?
2. How do I change the certificate used by the Azure website that is getting generated while connecting to VNET through point-to-site? It seems it all the websites connecting the VNET using same auto generated certificate. How and Why?
Thanks in Advance,
With Best Regards,
Kasinath

Hi Kasinath,
Where did you create the websites? Are they in the same web hosting plan? Based on my experience, only websites are running on a web hosting plan that’s in the ‘Standard’ pricing tier can be connected to a virtual network. A website can only
be connected to one network at a time and you can only have up to 5 networks configured in your web hosting plan.
In addition, the system will then create a certificate to authenticate with your VNET if it is the first website in your subscription to establish a connection to that network. Why did you want to change the certificate?
The link below maybe helpful to you:
Integrate your Azure Website with an Azure Virtual Network
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

DomainCreation fail:"The application location must have write permission."

Hi,
I'm facing an issue while creating a domain using pack.sh/unpack.sh and WLST, Please help me in resolving it.
ERROR:
Error CFGFWK-60550: Script execution aborted. The script may contain an error.
The application location must have write permission.
Template name - "new_dom_tmplt.jar"
Name of the dom to be created is "newdom"
Below are details of error:
[Red@Home Oracle/Middleware/wlserver_10.3/common/bin]$ ./unpack.sh -template=/appdata/wkst/cws15/cws2_dom_tmplt.jar -domain=/Red/sunil/domains/newdom
|<< read template from "/Red/sunil/templates/new_dom_tmplt.jar"
|>> succeed: read template from "/Red/sunil/templates/new_dom_tmplt.jar"
|<< write Domain to "/Red/sunil/domains/newdom"
|>> fail: write Domain to "/Red/sunil/domains/newdom"
CFGFWK-60550: Script execution aborted. The script may contain an error.
The application location must have write permission.
Thanks,
Sunil
Edited by: 907822 on Mar 22, 2012 2:14 AM
Edited by: 907822 on Mar 22, 2012 2:16 AM

Self answer,
for those who have faced this issue the solution is to use the "app_dir" parameter in the unpack.sh, make sure that the directory you are specifying is having all the read write permissions to the user.
Regard's,
Sunil

Creation of Microsoft Azure Website failed. The application already exists

Similar Messages

Maybe you are looking for