Creation of Microsoft Azure Website failed. Cannot move or create server. Subscription ' id ' will exceed server quota.

I'm trying to create a new MVC website with azure cloud server. However, when creating my project/solution in visual studio I get the following error.
Creation of Microsoft Azure Website failed. Cannot move or create server. Subscription '<id>' will exceed server quota.
During the day I created several MVC projects, as a learning exercise, and it worked fine. Now it's failing every time I create a new MVC website with Azure.
Every time I created a website, I have always deleted any generated Azure sites and databases via the management portal. Currently I have no websites in Azure. Thus I don't see how I've reached a quota,
Any ideas what might be going wrong?
My subscription is pay as you go.
Thanks for your time,
Rob

Hi,
It might be due to various other resources (sql DB, application insight, etc) that you may have created while deploying earlier websites, and filled up your Quota. Due to which, creating new resources would exceed the quota limit.
Check for the unused resources and clear them. It may clear the error and allow you to create new websites.
Otherwise, It should be an Account related issue than Technical issue. I suggest you contact Azure support, it is a best choice for you, Please contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/
Regards,
Manu Rekhar

Similar Messages

Creation of Microsoft Azure Website failed. The application already exists

Trying to create a new website, I get this error:
Creating Microsoft Azure Website
Creation of Microsoft Azure Website failed. The application already exists. The remote server returned an unexpected response: (409) Conflict.
I succeeded to create this website earlier on and then I deleted it as I didn't need it anymore.
Now I want to create it again but I get this error even though I've deleted all websites, hosting plans, cloud service, etc from my Azure account.
Any idea on how to fix this?

At this point, I don't know how it happened, but we'll need to dig deeper. I believe there is a sequence that can cause problems if you create a site via Current portal and delete it via Preview, but I'm not sure.
BTW, it seems you have 2 other sites that may be in the same situation (deleted in a way that you couldn't recreated them). They're 'shortl...dev' and 't..d' (not giving full name to avoid squatters!). Do you think you'll want to recreate them later? If
so, we can do the same maneuver to get back to a good state.

Cannot move or create server. Subscription '--' will exceed server quota.

Hello all ,
i have 150$ in my account and there is no serivce in my account but when am going to create any service it display this error:
Cannot move or create server. Subscription '---' will exceed server quota.

Hi,
This is a technical forum, about account issue, I suggest you contact azure support, it is a best choice for you, Please contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/
Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

P6 Professional R8.3 - (Cannot move selected items because the result will exceed the limit of WBS tree maximum levels)

Hi,
Has anyone encountered this error "Cannot move selected items because the result will exceed the limit of WBS tree maximum levels"?
Please advise if there's any way around / solution to this. http://s8.postimg.org/bj900spcl/1_error.jpg
Thanks.

Thank you so much MichaelRidino!

Users can only connect to RD farm website and cannot remote into terminal server , when connected via VPN

Hello,
I have a RD farm using 3 Win 2012 servers (1 broker and 2 session host), for internal use only, have not
configured gateway for internet access.
Users are able to connect to RD farm website and remote into terminal server, within office
but can only connect to RD farm website and cannot remote into terminal server , when connected via VPN
Its takes long time at securing connection and fails.
Thanks

Hi,
Thank you for your posting in Windows Server Forum.
First of all I would suggest you to configure RD gateway role on your server and pass all the connection through it because it’s a best practice to use RD Gateway in RDS Farm.
Apart from this, if you are not using RD Gateway then you must check that you have successfully forwarded port 3389 for RDS to access via VPN. Also check that you have made configuration under IIS Manager to enable Forms Authentication. Please check
this link.
In addition, please refer beneath article for additional details.
1. How to Access Windows Remote Desktop Over the Internet
2. Remote Desktop Services in Windows 2008 R2 – Part 3 – RD Web Access & RemoteApp
(For reference)
Hope it helps!
Thanks,
Dharmesh

SCCM Install fails. cannot connect to SQL server. "the network was not found"

Hi,
I'm installing SCCM 2012. i have a 2 server boxes. 1x sccm and 1x dedicated SQL. sccm installation is stuck @ connecting to DB.
SQL server is 2012 with SP2, static 1433 port used.installation account used is already sysadmin, sccm computer account also added into SQL local admins. ports 1433, 4022, 445 are already FW open in between SCCM box and SQL Box?
error pop up" "the network was not found"
Pls advise.

if MS is really doing good job then such things (scCm on remote sql) should be easy for us with proper docs. Cheers!
The docs are "proper". They give you all the technical details needed. They assume however that you know how to translate the stated requirements, like the ports necessary (as documented at
http://technet.microsoft.com/en-us/library/hh427328.aspx ), into the environment you are working in. They cannot give you a click by click guide because that would only be applicable to
generic lab environments.
Sorry that that may sound a bit harsh, but it is reality. They simply have no idea what customer networking environments actually look like as the possibilities are simply unbounded. They must rely on the implementer being able to take the core technical
requirements and implement them for the uniqueness of the environment they are working in. In most cases, this is generally straight-forward, but there is a great deal of variety in the real-world.
Jason | http://blog.configmgrftw.com | @jasonsandys

TS1347 I have been using Outlook for years...so an account has been set up...but I still cannot move events created on my iphone to outlook...events created on outlook do go to the iphone.

I recently purchased an iphone and am trying to get the phone to sync with Outlook. I have been using Outlook for years, my last phone was a palm and I had hard sync capability. Trying to use Wi-Fi, and have also tried hard wired...when I create an event on my phone it will not show up in Outlook. If I create an event in Outlook it will show up on the phone. Any ideas on how to make this work? The help line says I need to set up Outlook...and to run the Wizard...but that has been done.

the version im using is 10.7.5
im not sure what you mean by you second statement. when i open those application on my macbook its on my macbook but when i sign into icloud. i have those option selected.
maybe my problem is im using the wrong ID...... lol.
is there away you can delete or change icloud accounts/ ID's???

Azure Website doesn't recognize my Database's Table after changing the Schema

I have a Microsoft Azure Website running and working with an Azure SQL Database for the sole purpose of storing and retrieving user accounts. However I needed a mobile client as well there fore according to numerous tutorials online such as [THIS][1],
I had to change the 'schema' of the database from 'dbo' to my mobile service's name which is 'usermobileservice'.
This was done using the SQL query:
CREATE SCHEMA usermobileservice; ALTER SCHEMA usermobileserviceTRANSFER dbo.usertable;
This did the trick and I was able to connect to the Database using my mobile applications BUT now I can't access the database using my Azure Website! Gives me this error:
Server Error in '/' Application.
Invalid object name 'UserTable'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Invalid object name 'UserTable'.
I believe the ASP.NET Web Application cannot find the Database Table anymore since I changed the schema? What is the right way of sharing the data between a Website and a Mobile Service?

Hi,
Thank you for your post.
I am trying to involve someone familiar with this topic to further look at this issue.
In the meantime, please have a check on the below link and check if it helps.
https://social.msdn.microsoft.com/Forums/azure/en-US/60764eb6-17d0-4395-a887-2a793b44ce88/connect-mobile-service-to-an-existing-database?forum=azuremobile
Regards,
Mekh.

Azure CDN for Azure Website

I have an Azure Website and I would like to serve some of it via an Azure CDN. Apparently, this used to be possible by using a /cdn folder in an Azure Hosted Service however, you cannot create these any more.
If I try and create a Cloud Service (which replaced the Hosted Service), I just end up creating an Azure Web Site and you cannot connect a CDN to it.
So, my question is: How can I connect an Azure CDN to an Azure website?

Hi,
CDN in general has not been changed. Some old tutorials such as
http://blog.smarx.com/posts/using-the-windows-azure-cdn-for-your-web-application would still work. Please note it does not stand by website yet. It has to use web role. When you creating a cloud service, it works as a container. You can upload your
web roles to it. Cloud service is not website. In addition, at the moment it is needed to use the old Silverlight to manage CDN. We're in the progress to enable CDN management in the new portal, as described in the old portal:
Windows Azure CDN management experience will be available in the new Windows Azure Management Portal in the next couple months. Once this experience has been moved over, sometime this summer, the Silverlight Portal will be decommissioned. At that point,
you will no longer be able to use this Portal to manage your CDN assets and will only be able to do so through the new Portal.
Best Regards,
Ming Xu
Ming Xu
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Is there a list of best practices for Azure websites?

Hi all;
I was talking with a Sql Server expert today and learned that Azure Sql Server can take up to a minute to respond to a query that normally takes a fraction of a second. This is one of those things where it's really valuable to learn it when architecting as
opposed to when we go live.
Websites are not Sql Server (obviously) but that led to the question - Is there a list of best practices for Azure Websites? If so, what are they?
We will be the website in multiple datacenters and using traffic manager to point people to the right one. The website will run as a REST server using Web API 2, mostly for license checks from our app running on corporate Exchange servers. And a small part
will be for javascript based web pages used for account CRUD.
thanks - dave
What we did for the last 6 months -
Made the world's coolest reporting & docgen system even more amazing

sorry I was not sure if you were using a web server or what?
One other idea out of the slow cooker is to use a dedicated web server with SQL server running beside IIS
If you are using the standard web sites, then the SQL option is about as slow as FTP uploads, very slow
I have considered time of day too, and it seems Azure is less loaded early in the AM
Corsair Carbide 300R with TX850V2 Asus M5A99FX PRO R2.0 CFX/SLI AMD Phenom II 965 C3 Black Edition @ 4.0 GHz G.SKILL RipjawsX DDR3-2133 8 GB EVGA GTX 660 Ti FTW Signature 2 (GK104 Kepler) Asus PA238QR
IPS LED HDMI DP 1080p ST2000DM001 & Windows 8.1 Professional x64 Microsoft Wireless Desktop 2000 & Wacom Bamboo CHT470M Place your rig specifics into your
signature like I have, makes it 100x easier to understand! <a href="http://hardcore-games.azurewebsites.net/" target="_blank">Hardcore Games</a> Legendary is the Only Way to Play!

Publish cloud service fails from Visual Studio 2013 Update 4: Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.

I have a cloud service project with two roles (service and worker). In Visual Studio 2013 Update 4 when I choose "Publish..." from the "Solution Explorer", it opens "Microsoft Azure Activity Log" and quickly terminates.
Here the log:
9:43:47 AM - Applying Diagnostics extension.
9:44:09 AM - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
All works fine when uploading the package and updating from https://manage.windowsazure.com/. It only fails from within Visual Studio.
What can I do to get it working?

I have the same problem with our Azure project. Two web roles (service and worker). Just updated from SDK2.2 to SDK2.5 and Visual Studio 2013 Update 2 to Update 4. The main reason behind this was to move from log4net to WAD and in doing so, of course directly
move to the new diagnostics version.
Now, I get the same error message in Visual Studio:
11:45:24 - Checking for Remote Desktop certificate...
11:45:25 - Applying Diagnostics extension.
11:45:45 - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
With my small testing project - also two roles (service and worker) - everything is fine. However, I'm looking for a solution to make by existing production service working.
Also the test project shows no Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml,
but this is no problem - so what's the meaning of or solution to this error messages?
What I found so far:
I deployed the Azure project from the same development environment to another Azure test service: Deployment
showed no errors and the service is running fine! So the problem is not with the source, the development environment, library dependencies etc.
Trying Azure cmdlets for PowerShell also work fine for the new service and fails for the production service with almost the same error message:
Following http://blogs.msdn.com/b/kwill/archive/2014/12/02/windows-azure-diagnostics-upgrading-from-azure-sdk-2-4-to-azure-sdk-2-5.aspx
I tried:
PS C:\> Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config -ServiceName $service_name -Slot 'Staging' -Role $role_name
VERBOSE: Setting PaaSDiagnostics configuration for MyWebRole.
Set-AzureServiceDiagnosticsExtension : BadRequest : Published Asset Entry for Image
Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
At line:1 char:1
+ Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -Diagnostic ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Set-AzureServiceDiagnosticsExtension], CloudException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.CloudException,Microsoft.WindowsAzure.Commands.ServiceManagement.
Extensions.SetAzureServiceDiagnosticsExtensionCommand
The problem seems to be related to those service configuration parts in the cloud which are not replaced
by a new deployment... So what are possible reasons or fixes for this behaviour?
Best regards,
Andreas

"Provision Failed" in Micro Azure Website

I removed my own wordpress site
mimiansky.azurewebsite.net
in Azure Web Site service.
And then, I try to re-make website in same site URL.
But I coudn't do that with the fail massage
"Provision Failed"
How can I solve this problem?

Hi,
Please have a look at this thread:
https://social.msdn.microsoft.com/Forums/en-US/a591513c-6451-4f20-9609-2bbafb17a3a2/fixing-provisioning-failed-errors-in-azure-websites?forum=windowsa, it gives us an workaround to solve this type issue, hope this helps.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation failed Cannot execute configure of database using RapidClone

dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance

dear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder
Regards,
John

Hi,
Please try to setting Folder Permissions on Web Publish, and then deploy it with Web Deploy, as far as I know, if we do that, Web Deploy will use the SetAcl operation to change permissions. Please have a look at the article below.
#http://sedodream.com/2011/11/08/settingfolderpermissionsonwebpublish.aspx
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

PDF Generator failing on Azure Website but not development machine

I am using EVOPDF for testing html to pdf.
http://idealpi.azurewebsites.net/defaultpdf.aspx
On local development works fine in full trust. When run on Azure website Reserved mode with full trust in web.config I get error.
Could not get conversion result header. Data receive error. Could not receive
data. Error code: 109
A similar post on discounet.asp site
http://community.discountasp.net/showthread.php?t=14232
indicates this is a full trust issue, but I have full trust defined in web.config
<configuration><system.web> <trust level="Full" />
Is full trust not full trust? Is there another way to define Full Trust?
Greg
PS
The EO company responsed with the following
For scalability and stability reasons, EO.Pdf performs the actual conversion in a separate worker process instead of inside your Web application process. That is probably what’s failing in your environment since in a Web only environment it usually won’t
allow you to spawn your own worker process.
Any workarounds using WAWS?

I have solved problem, with large files (~150 pages).
My Evo to Pdf version is 5.17 under 64bits process (iis 7.5) .
Making this change in web.config works ok
 <security>
 <requestFiltering>
 <requestLimits maxAllowedContentLength="1000000000"/> 
 </requestFiltering>
 </security>
Regards,
Jose Antonio.

Creation of Microsoft Azure Website failed. Cannot move or create server. Subscription ' id ' will exceed server quota.

Similar Messages

Maybe you are looking for