The sorting already exists error

Hello,
When I try to dynamically sort Crystal Report in ASP.NET application, I'm getting error "The sorting already exists" if I sort by the fields that had been used before.
I've found an article in the KB - 1218210 - stating that this was a bug in CR 10. But I'm using CR 2008. How to get rid of this error? Is there a way to clear previous sort?
Thank you,
Peter

is the report already grouped or sorted?
that maybe the problem

Similar Messages

Additional information: The sorting already exists

I am using VB .NET 2003 and Crystal Report XI.
The report has two sorting fields and I want to change the sorting order through programming. It has been working well until my computer died. After I got a new computer and set up everything, restored the source code from Source Safe, now everytime I try to change the sorting I get this error
An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in crystaldecisions.crystalreports.engine.dll
Additional information: The sorting already exists
Here is the code causing this error:
obj1.DataDefinition.SortFields.Item(0).Field = FieldDef
Where obj1 is a ReportDocument.
Does anyone know what is going on?
Thanks,
Alex

Hi, Alex;
I am not sure what the cause could be.
If you try a different report do you get the same results?
Have you installed the latest Service Pack for CR XI?
Regards,
Jonathan

Creation of Microsoft Azure Website failed. The application already exists

Trying to create a new website, I get this error:
Creating Microsoft Azure Website
Creation of Microsoft Azure Website failed. The application already exists. The remote server returned an unexpected response: (409) Conflict.
I succeeded to create this website earlier on and then I deleted it as I didn't need it anymore.
Now I want to create it again but I get this error even though I've deleted all websites, hosting plans, cloud service, etc from my Azure account.
Any idea on how to fix this?

At this point, I don't know how it happened, but we'll need to dig deeper. I believe there is a sequence that can cause problems if you create a site via Current portal and delete it via Preview, but I'm not sure.
BTW, it seems you have 2 other sites that may be in the same situation (deleted in a way that you couldn't recreated them). They're 'shortl...dev' and 't..d' (not giving full name to avoid squatters!). Do you think you'll want to recreate them later? If
so, we can do the same maneuver to get back to a good state.

Getting Object already exist error when installing adobe reader

I'm unable to install any Adobe application programs on my Windows 7 machine. I tried Adobe Reader XI, Lightroom 5.6, Photoshop CC, etc. All resulted with "Object Already Exist" error. I searched on Adobe site for fix, and there was one to delete Crypto file. However, this resulted with the same error. How can I install Adobe Reader?

Your approach is correct in identifying the error. I used ProcMon from Sysinternals (now Microsoft) and came up with the following events leading up to "Object already exists" error. The error occurs after opening C:\Users\%account%\AppData\Crypto\RSA\S-1-5-....... file. If the Crypto directory is missing, MSIEXEC.EXE will create along with RSA subdirectory and file name starting with S-1-5..... There were five NAME NOT FOUND events, and their sequence is
     Windows Installer Logging item in HKLM\SOFTWARE registry
     C:\Users\%account%\AppData\Local\Temp\MSI7058d.LOG (this file was created at the next step)
     Windows Installer Debug item in HKLM\SOFTWARE registry
     FontSubstitution in HKLM\SOFTWARE registry
     CTF Known Classes item in HKLM|SOFTWARE registry
I don't know which one causing the error, but my suspicion is the last one. But I don't know how to fix it. Is there anyone who can give me insight to what is happening and how to fix it?

Folder name already exists error when activating feature

HI,
I am creating a document library and adding folders to it using elements.xml in VS 2012.
First time deployment of the item works fine, the folder is created. But further deployment or activation of feature from site features is throwing the error "Folder name already exists".
Below is the elements.xml of List Instance, which was modified to add the folders.
<ListInstance Title="TestLibrary" OnQuickLaunch="FALSE" TemplateType="101" FeatureId="Guid" Url="Lists/TestLibrary" Description="TEST Library List Instance">
<Data>
<Rows>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_One</Field>
<Field Name="Title">Test_One</Field>
<Field Name="FSObjType">1</Field>
</Row>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_Two</Field>
<Field Name="Title">Test_Two</Field>
<Field Name="FSObjType">1</Field>
</Row>
</Rows>
</Data>
</ListInstance>
How to fix this?
Thanks

Hi,
According to your post, my understanding is that you got “Folder name already exists error when activating feature”.
I had used the following code snippet to create a folder within a document library, it didn’t throw errors when reactive the feature.
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="LibTest"
OnQuickLaunch="TRUE"
TemplateType="10000"
Url="Lists/LibTest"
Description="My Lib Instance">
</ListInstance>
<Module Url="Lists/LibTest/Folder1" />
</Elements>
http://shareden.blogspot.com/2012/11/creating-feature-with-image-library.html
Also, when you redeploy the project, it will give you a dialog which would promote to delete the existed list or not.
If you click the “Resove Automatically”, the visual studio would delete the existed list automatically, and create a new list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

How to check if the file already exists in the client directory

Hi all.
I'm on devsuite 10g. I'm using webutil to download files from DB using webutil function db_to_client.
What I need is to check if the file already exists in the client directory and if yes to display a message to ask the user if he wants to overwrite or no. How can I make this???
Here is the code that I'm using to download the file.
Thanks all for the collaboration.
Fabrizio
declare
file_path varchar2(2000) := null;
BEGIN
/** I ask where saving the file on the client machine **/
file_path:= webutil_file.file_selection_dialog
(directory_name => null,
file_name => :bin_docs.name,
file_filter => '',
title => 'Saving file',
dialog_type => save_file, --save_file
select_file => TRUE);
/** I download the file from DB to client **/
if webutil_file_transfer.DB_To_Client_With_Progress
( file_path ,
'BIN_DOCS',
'DOC' ,
'doc_id = '||:bin_docs.doc_id,
'Downloading file',
' '||:bin_docs.name) then
msg_alert('Download del file avvenuto con successo','I',false);
else
msg_alert('Si è verificato il seguente errore in fase di download '||SQLERRM,'I',false);
end if;
end;

How about something like the below:
Note: I have a yes/no alert to asking if they want to over-write the existing file.
DECLARE
file_path VARCHAR2(2000) := null;
over_write BOOLEAN := TRUE;
BEGIN
/** I ask where saving the file on the client machine **/
file_path:= webutil_file.file_selection_dialog
(directory_name => null,
file_name => :bin_docs.name,
file_filter => '',
title => 'Saving file',
dialog_type => save_file, --save_file
select_file => TRUE);
IF webutil.file_exists(file_path) THEN
/** check a file by the same name exists in the selected directory **/
IF show_alert('Ask_overright') != alert_button1 THEN
/** If we say no then set over_write value to false **/
over_write := FALSE;
END IF;
END IF;
IF over_write THEN
/** I download the file from DB to client **/
IF webutil_file_transfer.DB_To_Client_With_Progress
( file_path ,
'BIN_DOCS',
'DOC' ,
'doc_id = '||:bin_docs.doc_id,
'Downloading file',
' '||:bin_docs.name) then
msg_alert('Download del file avvenuto con successo','I',false);
ELSE
msg_alert('Si è verificato il seguente errore in fase di'
||' download '||SQLERRM,'I',false);
END IF
END IF;
END;
cheers
Q

I'm getting an 'objects already exist' error when trying to download itunes

My iPhone 6 wouldn't connect to iTunes since it need to update. So I went to uninstall iTunes and all it's contents. I went to download iTunes again, but when I did I received an 'Object already exists' error. I went to look at more information on the Apple website and I tried everything I could but I keep receiving the error. I uninstalled anything related to Apple on my computer and I went to the Program Files folder on my computer and found nothing related to Apple so I'm pretty sure I deleted all the data already. I really need help with this. I have a Windows 7 computer.

For "Object already exists" or "Access denied" errors when installing try opening Control Panel > Programs and Features > View installed updates then checking for Security Update for Microsoft Windows (KB2918614). Uninstall if you have it, then reboot and try installing again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

EXPDP generates new dmp file and reports "file already exists" error

Hello everyone,
Hope you all had a wonderful holiday. I got some problems with datapump expdp 10.2.0.4. It would be appreciated if you could provide some advice. Thanks in advance.
I newly created a 10.2.0.4 database. The database can startup and be connected via Toad without problem. I can also use impdp to import some data to the new database. But when I'm trying to use expdp to export a schema from the database, I got the following errors:
expdp parfile=expdp_scott_mfp1.parExport: Release 10.2.0.4.0 - 64bit Production on Monday, 26 December, 2011 22:10:49
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
ORA-39001: invalid argument value
ORA-39000: bad dump file specification
ORA-31641: unable to create dump file "/u02/exports/mfp1/expdp_scott_mfp1_12262011.dmp"
ORA-27038: created file already exists
Additional information: 1
Every time I run the expdp, it just creates the dmp file (expdp_scott_mfp1_12262011.dmp) specified in the parfile under the EXPORT directory and reports "file already exists " error.
Your advice is highly appreciated.
Thanks.
Edited by: 904668 on Dec 27, 2011 8:47 AM

i thought I found the problem. Used same file name on dump file and log file. How stupid of me. Sorry for bothering. Thanks and happy new year!

PSE 9 and 5 will not import - says the file already exists in the catalog !

I've already wasted 2 days looking for answers to this. When someone buys this program, at least half of the price is paying for the database in the Organizer - yet even John Ellis himself, who seems to know more than anyone about it, has gone to Lightroom. This is bad coding!!!
Upgraded from 5 to 9. If you read my previous posts, this took 2 days too, and phone help from a tech, because it would not install in my XP computer. It did upgrade the Organizer from 5, although many of the symbols are unusable and don't work to help me identify my tags. However, now I see that neither 5 nor 9 is able to look at a file and display thumbnails that are in it.
I move files around a lot for my business. Any half-way good database should be able to find the missing files, and also add any new images. Say I have 10 images in file A, then add 2 more to make 12. It can't see the added images! Says can't import, the file already exists in the catalog.
I tried: updating thumbnails, recover, repair, in both 5 and 9 - nothing works. to import the images that I can SEE in these folders! I read here that it will not import files if the same name is somewhere else. That alone is a problem. But I think it's more than that: even if the file used to be in another folder, folder B, it won't recognize that it's in folder A now!
Since PSE9 uses sql db, shouldn't that be better than 5 and be able to do simple tasks like this?
Any advice or similar experiences eagerly welcomed.

Thank you for replying, dj paiqe.
Do you mean the first little section that says photos may not be displaying? Yes, those just reveal hidden photos and are very basic. I did them.
I guess we disagree about databases and what they are designed to do, or maybe I didn't explain this well.
I did not move the images outside of the catalog: I move them to various folders, all already imported WITHIN the catalog, as I send them to various editors. (these are all drawings, not photos, and I do this professionally, so it needs to work).
Folder A and Folder B and Folder C have already been imported into the catalog. So if I move 2 images from folder B into folder A, the Organizer is simply lost, says image already exists, and everything is totally screwed up, as the image is no longer in folder B, and it can't find it in folder A!!! The problem is, unless I memorize the image name, say Image 9, I can't tell it to reconnect, as there is no longer an image in front of me! So there are 2 images, without names, now nowhere to be found. Inefficient, to say the least.
I've never tried Lightroom or Filemaker, but I cannot believe that they would lose data like this. I think it's the Folder coding that's not working in PSE, and I wanted this to work so badly!!!!!
I am willing to do it the PSE way, since you now have captions, keywords, etc, and it is a very powerful database, when it works. I understand that one is supposed to move images within the Organizer, obviously. But now many images are disconnected. I could start all over importing, but is there any way to do that without losing tags and categories?

HFM deployment issue on EPMA - The application already exists

The first time I deploy the HFM application everything works fine until I try to redeploy after deleting the application. I have tried registering the application to SS and then try deleting it from there but that does not work. Here is my deployment abort details:
Submitted Time : Saturday, March 21, 2015 3:38:22 PM
Last Updated Time : Saturday, March 21, 2015 3:38:33 PM
User Name : hypadmin
Process Name :
Thread : 0
Server :
Detail : Initiating Product Action...
Generating Headers and Callback Information...
Generating Application Data...
Posting Product Request...
Waiting For Status Updates...
PRODUCT_UPDATE: Update from product
Financial Management is transforming metadata from EPMA...
Creating Application...
The application already exists.
Please help and thank you.
Gideon Seroney

Got around this issue by creating a classic application over the epma app, provision admin then delete it from consolidation admin.
Unfortunately it seems that the epma application should never have been registered like a classic app. Always perform 'deploy' and never 'register' since it get stuck in SQL data tables. Unless you are a DBA I would not suggest monkeying with the tables to begin with.
Thanks!

HT1349 I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

Leigh...
but cannot do this because I cannot access Mac App Store
If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
It's ok to do this even you are already running v10.6.8.
Plants vs. Zombies, and that is all for additional software on here
FYI: Some third party software can cause issues with the App Store > Mac App Store: Sign in sheet does not appear, or does not accept typed text
Apple is not responsible for incompatibility isssues with third party software.

[svn:fx-trunk] 14009: DataGroup.getVirtualElementAt() needs to revalidate the element when the IR already exists but the data changes .

Revision: 14009
Revision: 14009
Author:   [email protected]
Date:     2010-02-05 12:53:05 -0800 (Fri, 05 Feb 2010)
Log Message:
DataGroup.getVirtualElementAt() needs to revalidate the element when the IR already exists but the data changes.
The element also needs to revalidate if it is resized, whether or not the IR existed before. This wasn't part of the bug but Hans realized this when he did the code review.
QE notes:
Doc notes:
Bugs: SDK-25354
Reviewer: Hans
Tests run: checkintests
Is noteworthy for integration:
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25354
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DataGroup.as

Please can u answer it fast

SharePoint 2007 Content deployment Error: 'A folder with the name already exists.

Hi, In SharePoint 2007 one Content deployment job is failed with below error:
Content deployment job 'Remote import job for job with sourceID = some id' failed.The exception thrown was 'Microsoft.SharePoint.SPException' : 'A folder with the name PublishingImages/AEI-2014/Blue already exists.'
From last 3 days I am getting this error and previously this Job was running without any Error.
In Import Log file getting message: "FatalError: A folder with the name PublishingImages/sg-2015/yellow already exists."
Please tell me how to resolve the issue.

Hello,
It seems same folder exist in destination server that's why job is failing. You need to check destination server and remove the same name/GUID from site then try again.
See this technet for more info: (see "Conflicting content on source and destination" section)
http://technet.microsoft.com/en-us/library/dd795107%28v=office.12%29.aspx
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

The "Already Exists" error

Hi, ill show my issue.
When Im trying to start a software with Java... it appears "Unable to load the Java Runtime Enviroment"
Then, when I go to Java Installation it appears "already exists"
I cant find a solution to this problem, need help.
Thanks

How are you trying to run the program exactly? From the shell/console, double clicking a jar file, webstart, etc. It sounds like whatever you are using to run the program is not finding the JVM.

Excise invoice already exists error in J1IS

Hello
Created the Subcontracting PO , and Issue the material to vendor ( mov type 541) with payment of duty, after this created the Excise invoice with T.code J1IS, system was generated the Excise entries in table J_1IEXCDTL and J_1IEXCHDR.
After that we have reversed the excise entries, so now we got "R"Indicator in status field in above said table J_1IEXCDTL.
Now system should allow me to create one more excise invoice with same Material document number but sytem was giving error message that "excise invoice already exists"
Why system was allowing us to create new excise invoice?
Regards
sapman man

hi
you can't create another Excise document with same Material Doc.Because for this Material document already Excise document exit even though it is reversed.i think you have to delete Material document from J_1IEXCDTL and J_1IEXCHDR. then try to create new
regds
Rami

The sorting already exists error

Similar Messages

Maybe you are looking for