Creation of new MRP Areas.
Hi All,
While creating new MRP areas am facing problem like "ERROR IN CUSTOMIZING:MRP AREA 1002 IN PLANT 1002 DOES NOT EXIST.
But I am creating MRP areas for another plant-1003.
I didnt understand thatwhy this error is coming and unable to save.
Can any body tell me how to slove this problem.
Thanks
Chindam
dear 2009,
frist create MRP area using SPRO->Prod>MRP>MRP areas-->Define MRP area(SM34)
then come back and activate MRP for created MRP area
sree
Similar Messages
-
Hi,
I have four plant under one company code. Recently, one more created under the same company code. The Storage loacations are same in SAP across the five plants. While defining MRP area for the new plant Receiving storage location is used what is has used for the other four plant but system is giving error message " Error in Customizing. Storage location ST01 used by MRP area 55555"
Please suggest how to resolve this error.
Regards,
VsDear ,
Couple of checks for you in this issue :
How come Four plants has same common Recieveing Storage Location ? PP Oreg structure is Plant-Storage loaction ( 1:n) but not N:1 .I feel you should have four dirent storage location .However , in MRP area Org sequence is MRP Area -Plant -Storage Loactions .Even you have new plant and u want to create MRP Area for that , you should have Storage Loaction ( any kind) assinged to that plant , then it will allow you to include .If you are trying to use Other plants storage loaction , system will flag this message.
Basically , Receiving storage location is the default sloc that will be in PR that was created by MRP if you run the MRP Area level.So ,
1.Did you Convert planning file entries (SE38 program RMDBVM00)
2.MRP area actvation is at Client level .Check wether u have activated the MRP area or not
43As One plant can be entered for each MRP area and there could be multiple storage location under the plant in one MRP area .But , did you check wether recieveing same storage location can be assinged to multiple plant under diffierent MRP area .
Check this and come bakc
Regards
JH
Edited by: Jiaul Haque on Jul 19, 2010 3:50 PM -
Hi Experts,
I want to create a new Business Area in my system and my worry is will that have an impact on my live system.I tried out a possiblilty by creating a new Bus Area T-Code OX03 and created a new Profit and CostCenter for the same in QA Server.
I tried out posting Journals for the same and the output was ok in FBL1/3/5N.
We are using SAP ECC 6.0 with Sp Purpose Ledger functionality.Do i need to do any further customization for the same.Since i want to create this new BA in Live server now.
Regards
RahulBusiness Area is an org. unit which you would want to fill in your documents, so you could draw business area-wise financial statements. I think you are good to go with what you have done in QA system, if you do the same in your Prod. system. But, what would happen to the documents that already exist in Prod. system. You must come out with a way to populate those documents with the business area, if applicable. If not (I mean, if it is a completely new business area for use in future only), your job is easy.
-
Creation of new personal areas
hi gurus,
how to create a new personnel area and assigning to personnel sub-area and business area.
how to do this ....
please help .........Go to SPRO --> enterprise structure --> Definition --> Human Resource --> create Personnel Area. Here you will have a copy button. Try and copy a pre created Personnel area which is available in all standard SAP and personalise it by giving your own personnel area no. This way all the back end tables developed by SAP for that particular country grouping will also get copied. Note: Please change the company address and name details once the copy function is done.
PSA are created for each PA's. Here also you can use the copy function. -
Unable to create a new MRP area type 3 for subcontractor?
In golden client for defining the MRP area type 3, its not accepting the vendor number in the subcontractor field ( since there wont be any master data) saying doest not exist in LFA1 table.
But there are certain similar data already available in the golden client, I dont know how those have been created long back for company.
we are using ECC 6.0,
Can i move the TR without subcontractor number to Quality and Production clients and maintain the subcontractor in Material master.
Please suggest me how to do that experts
Thanks
SriniHello David,
We are having S&OP 3.0 SP1 patch 1 on premise with HANA version 1.00.69.385057. We have old golden demo files imported.
Could you please let us know...
1) is it right combination..?
2) Is it necessary to upgrade to patch 2.
3) in case, we upgrade to patch 2, do we need to import golden demo file again for patch 2
4) Do we have any release note for patch 2.
Your quick response is highly appreciated. Thanks!!
Regards,
Dinesh Goyal -
Hello!!
We have multiple controllers Cisco WLC 5508 (all running software version 7.6.120.0) distributed in various buildings and a controller in other control building (also Cisco WLC 7.6.120.0 5508) operating as Master and backup of the buildings's controllers .
Each building is radiated such an SSID that is used as a validation of the user connected to that SSID web portal each controller (in the WLAN, Security -> Layer 3 -> Web Policy), using the local database to validate the user.
The problem is that the local database of users is not being replicated between controllers buildings and the Master controller, so if you drop the controller of a building, the Master controller begins to provide service to the buildings access points, but the equivalent radiated SSID cannot able to validate users.
I need know if it's possible through Cisco Prime Infrastruture 2.1, first replicate in the Master controller on the basis of existing controllers buildings each local data and, second, that the creation of new users are automatically perform both the controllers like to the Master .
Thanks.As noted earlier, it is not advisable to use the root user to log in for normal use. New users and groups can be created by navigating to Administration > Users, Roles & AAA as shown in the preceding figures. It would help to chalk out what are the various levels at which you want to distribute the users, and to create those roles first. It doesn’t really matter whether you create users or groups first. New users can be easily added by going to Administration > Users, Roles & AAA > Users > Add Users > Select “Add Users” from the drop-down on the right side. Once you get into the add user workflow, fill in the username, password, and local authorization for this user as shown in the figure below.
A virtual domain can also be assigned to the users when you define their roles by selecting the virtual domain on the left side and moving it to the right side as shown in the image below (left). -
Mandatory/Default field for mrp/forecast profile mrp area
Dear guru,
In MM01/MM02 when i create a new mrp area for a material I want Mrp profile field and forecast profile field as mandatory field. Or as alternative solution purposed with a default.
How can I do that ?Dear Murugesan ,
in OMSR i make the mrp profile (MDMA-DISPR) and forecast profile (MDMA-PROPR)
as required entries in the screen sequence.
But when I create/change mrp area fields the system dont consider as required these fields.
Are you sure that the field selection for data screen is concerning also for mrp area fields ?
Thanks. -
How to assign materials to MRP Area
Dear All,
How to assign materials to MRP Area
Thanking you
Regards
PrashantHi
Go to SPRO
Production Planning>>>> Master Data>>> MRP AREAS>>>Define MRP Areas, Create New MRP AREA
Then come to Material Master ( MM02)
Go to MRP1 view
In this Tab, Go to MRP AREAS BUTTON
Here you can assign the MRP AREA to that material
For any other info, Plz revert
Regards
BRSR -
Linking SLoc and MRP Areas in Supply Area
Hi All,
I recently moved one production line from one plant to an other one. This new line is feeded with Water from a separated tank. I would like to be able to see the requirement of water coming from the new line and stock in this tank separatelely from the "other" Water to be able to know how much water we have to supply to this separated tank.
Based on, what we are asking for is a new storage location equivalent to the separated tank (for stock and consumption) and a new MRP are (to be able to differentiate between demand).
this is the situation am going on right now, i think the above subject is what am i thinking the best solution on this situation, can anyone help me guide to work on this. thank you!Dear,
APO-DP Vs Flexible Planning in ECC. Yes APO advance but ECC is more user friendly.
The master data is managed in R/3 and transferred to APO using CIF. An issue storage location is maintained in the R/3 production version. This issue storage location is assigned to an MRP area in R/3. This MRP area is contained in the integration model (transaction CFM1). The MRP area is therefore transferred to APO. The APO plan (PPM or PDS) is created in APO in the MRP area. Using this plan, a planned order is created in the MRP area location in APO.
If you want the R/3 behavior, you must not assign the component to the model in the MRP area location. The system will then automatically switch to the plant location, that is, the system then uses the plant location as the issuing location of the component in MRP area.
Hope it will solve your problem. Also refer the OSS Note 628739 - APO 3.x Release restrictions for MRP areas
Regards,
R.Brahmankar -
Dear SAP Guru,
hi, i have a case if anyone can help !
i have material X with MRP area R0001 (Vendor 0001) with plant A, when i run MRP .. PR exist in MRP area R0001
but when i change MRP area into R0020 (Vendor 0020) and set deletion flag MRP area R0001 (vendor 0001) and run MRP
the result not in MRP area R0020 .. but in plant level MRP area that's MRP area A
why the result not int new MRP area R0020 ? can anyone help this issue
thank you
Regards
Budhi
Edited by: A_Budhi_P on Oct 27, 2010 5:46 AMHi
For the Material X
=========================================
You have Created the new MRP AREA >>>>> R00020.
Also, you mentioned that, deletion Flag is set for the Old MRP AREA >>>>R0001
=========================================
After Creating this New MRP AREA>>>R0020,
1) Did you assigned this New MRP AREA >>.>R0020 in the Material Master (MRP1 ) for the material X ?
2)When Running the MRP,
you have to run the MRP with the MRP AREA>>.>R0020. Means, you have to enter the following
Material : x
MRP AREA : R0020
Plant : Plant Code
Then run the MRP
In this case you will get PRs, against the requirements of the Material x, For the given MRP AREA>>>R0020
Please check & revert
Regards
BRSR -
Reg.New field creation in Consumption posting area
Dear Experts
We want to create new one filed in the below refered path.
SPRO->Material Management->Purchasing->Account Assignment category. in the below screen
Consumption posting filed - New field to be added.
How to create the above. Pls advise
Thanks
Rajakumar.KHi,
u can discuss with ABAP er for creation of new field in that existing screen means u can go for the enhancement as per ur requirement.
otherwise, u can use the existing 17 types of account assignment categories that are provided by std. SAP. u can use the following any one of consumption posting area.
A Asset
V Consumption
E Accounting via sales order
U Unknown
P Accounting via project
or u can check any possibility to define any new consumption posting indicator. -
Creation of a new controlling area
I'm trying to create a new controlling area (trans. OKKP).
In folder "activate components/control indicators", I wanted to activate Profitability Analysis but the field was in grey and was not possible to change from "component not active" to one of the other activation possibilities.
I need to know what to do to change this field.
The client is working with COPA and this set-up was done before to assign the controlling area to the FI company.
The SAP version is 4.7Dear.
You can activate that through tcd KEKE.
You know, Before that, Operating concern must be maintained.
Regards. -
Use of report RMMDDIBE for MRP area creation
Dear All
I have this requirement where i have to extend already created materials to storage location MRP areas. In SAP documentation i found that, standard report RMMDDIBE can be used for this.
If anyone has worked with this earlier, kindly let me few things abt this report
1- Exact fucntionality of this report
2. How to run this report
3. Is it a configuration or just front end report which has to be run everytime
4. can we make front end batch job
Any help on this would be great
thanks
balsHi Murugesan,
1. Exact fucntionality of this report
The mass create & change MRP Area data instead of manually doing via material master MRP1 view
2. How to run this report
Select the materials and plant that you want to create or change the MRP areas, then select where to copy the MRP area data from, i.e. copy from material master MRP views, copy from other MRP area data.
For example you can copy the material master data when creating, then use "create/change the data" to update some of the fields.
3. Is it a configuration or just front end report which has to be run every time
Yes, you must have configured MRP area and assigned storage locations in the IMG. RMMDDIBE is a mass master data update program, it is not configuration.
4. can we make front end batch job
No real need, this is a mass create/change program.
James -
Replenishment delivery for material with MRP areas and Avl Check
HI We have MRP area at storage location level maintained for materials. Stock exists in the plant in the storage location which is part of the MRP area.
Now when I create STO and try to create delivery for the same, system is giving message 0 stock available and not creating delivery. Material has 02 Avl Chck group.If I deactivate the MRP area in the material master, it allows creation of delivery.
How can I ensure that system creates delivery even though stocks exist in MRP area relevant sloc only in the plant?
Sriram1) According to SAP when inbound deliveries are used and your delivery item category is set up for mvt type 101, these should be received with transaction VL32N. If you use MIGO/MB0A instead the GR status in the delivery will not be updated. If you then report on open deliveries you'll notice that nothing is received in the course of time. Amazing. Now if you set up the delivery item category without the movement type your inbound will not even be GR relevant. Just one of these things that's nice to be aware of.
Check note 199703.
may b it helps... -
EA-FIN New Depreciation - How to restrict creation of 'new intervals' ?
Hi Everyone,
We have turned on the EA-FIN Business Function Extension and are wondering if there is a way to restrict the creation of new intervals using company codes. We have three companies in our SAP system and want only one of them to be able to create new intervals. Is there a standard way to do this or only be development? All ideas are welcome!
So far we tried to search if there is an Authority Object, which could be used to apply this restriction with no luck. Could it be done using Validations?
Thanks in advance,
Ernewhy would you want this? intervals are just a technical item... so long as the numbers are correct and the calculation is logical to follow, why would you care?
you can probably achieve this by:
1 - immediately blocking every asset record so that no other postings can be made
2 - not allowing any time-dependent changes to occur. this might be possible via authorization or you could remove the time intervals button via a simple screen modification
but I don't understand why this is wanted.
Maybe you are looking for
-
Hi I saved all my VIs in a single library (.llb) and worked on it for a few days. Now, when I try to open the VIs that should be in the llb I receive the following error : "an error occured while listing the contents of ...here comes some releveant n
-
unfortunate I can't download this item that I have purchased it 11/10/12, please credit $10.70 toward my visa. thank you Order ID: MHKD9W693B Receipt Date: 11/10/12 Order Total: $10.70 Billed To: Visa .... 0337 Your receipt No.155041685384
-
Unexpected Quits in multiple applications at Save or Import/Export window
Hello, For several months I have Apple and Adobe applications as well as Firefox, randomly quit when bringing up the Save, or Import/Export window. (I have copies of the error logs.) I thought I had it fixed since I haven't had any issues for some ti
-
Changed Upgrade Eligibility Date
Hey, So I'm an additional line on a family plan that began in November of 2011. I've had the same phone the whole time, but two of the plan users already upgraded. Obviously, I should be eligible or nearly eligible. However, the eligibility date
-
Hi. I installed EP Sneak Preview SP4 and I want to use PDK. - Which version of PDK can I use for EP Sneak Preview SP4 ? ( PDK 6.0 SP3 is OK ? ) - Where can I get PDK eclipse plugin for EP Sneak Preview SP4 ? (I found PDK eclipse plugin SP2. Is it wo