Creation of RMAN Tablespace

Hi all,
Help me regarding creation of RMAN tablespace.I know that we should create RMAN Tablespace with 20gb in size by default.For creating rman tb we should execute upto catproc.sql.
The question is
1)My staff taught me that we should execute upto catproc.sql. From which script we should start.Scripts are in rdbms directory.whether we should execute from the order of scripts they are placed in ?Oracle_home/rdbmsdirectory.
Thanks in Advance
Rajkumar

Hi,
I know that we should create RMAN Tablespace with 20gbYou don't really mean 10gb, but 20mb, yeah?
You should install every script needed for your database to have enough functionnality. This includes at least:
. catalog.sql
. catproc.sql
. some i'm too tired to remember... use DBCA to generate database creation scripts, and just get the parts you'll need/se will fit.
This, only if you're setting up a database dedicated to RMAN.
Regards,
Yoann.

Similar Messages

Physical Standby Database Creation with RMAN

Hi,
I'm in 10g on Linux. I want to create a standby database on another Linux server. I did not find a clear procedure to create it in Oracle® Database Backup and Recovery Advanced User's Guide 10g Release 2 (10.2) Part Number B14191-02
and niether in Oracle® Data Guard Concepts and Administration 10g Release 2 (10.2) B14239-04
In the last one chapter 3 sends you to F appendix and F appendix says do nothing before having than all in chapter 3 :
In F.1.1 page F-2 it is said :
See Chapter 3 for a complete discussion of physical standby database preparation,including initialization parameter settings. You must perform all necessary preparation tasks described in these chapters before RMAN can successfully create the standby database files and mount the standby database.
Any way I'm looking for a procedure or clear article to create it.
Many thanks before.

Physical Standby Database Creation with RMAN
Use the DUPLICATE command.
Check out this metalink doc: Note:374069.1 and Note:118409.1
Message was edited by:
STW
Message was edited by:
STW

Restoring from RMAN tablespace backup ; Few questions

11.2.0.3/RHEL 5.8
We have a RAC DB which is used by more than 20 applications. One schema for each application and one tablespace for each schema.
We have a schema with 130gb in size. All Objects in this schema use a single tablespace MCS_DATA.
This weekend we are applying some changes involving DDL, Code and Data .Usually we take an expdp backup of the schema before the activity starts and later if something goes wrong with script deployment we'll revert to old state by dropping the schema and doing an impdp from the expdp backup.
Question1.
Can we do an RMAN tablespace only backup and if something goes wrong with script deployment can we drop the schema and the tablespace and then create an empty schema and then restore from the tablespace backup ?
Question2.
If the above is possible , can you explain how it is going to work out because we are essentially plugging (restore,recover) in a tablespace to the database. Any potential problems ?
Question3. If the above (Question1) is possible, will restore/recover of this tablespace require a downtime for the entire DB ?

Tom;
If you are talking about RMAN TSPITR then yes you can. See - Purpose of RMAN TSPTIR in Backup and Recovery User's Guide E10642-03.
The problem with TSPTIR is bulk. You need a lot of disk space to create a copy and then data pump the information out and back in. I just tested this on 11.2.0.3 and its slow. RMAN created a script which produced an AUX instance and did the data pump, but I had clean up afterwards. If it errors out you can have an AUX instance hanging out in the background.
For TSPTIR you will need an area on the disk to server as an auxiliary destination large enough to hold what you are recovering plus the SYSTEM, UNDO and TEMP tablespaces.
I would probably look at Transportable tablespaces as a possible option too.
http://docs.oracle.com/cd/E25054_01/backup.1111/e10642/rcmttbsb.htm
E10642-03 has a section for recovering a tablespace in chapter 2. The Tablespace must be offline, but the database can be up.
This uses "restore tablespace" and "recover tablespace" commands. You would perform this type of recovery when you are say missing a datafile. You can recover any tablespace except SYSTEM and UNDO with this.
Data Pump might be an option too, but given your tablespace size I would have worries about recovery time. Oracle lets you set compression
and a limit to each file produced.
expdp TABLESPACES=YOUR_DATA dumpfile=DATA_PUMP_DIR:ts_dumps_%U.dmp LOGFILE=DATA_PUMP_DIR:ts_dumps_log.log parallel=2 filesize=10G compression=ALL
Given the size of your database a better option might be something like Data Guard as your recovery time would be brutal.
Best Regards
mseberg

Restoring a Rman Tablespace backup to noarchilog mode database

Hi All,
Is it possible to take a backup of a tablespace through rman from archivelog mode database and restore the same to noarchivelog mode database through rman ? Please suggest if it is not possible why it is not possible.
We have a testing database from which a tablespace has been dropped. Can it be restored from the Prod database ?
Please help. The database version is 9.2.0.8..

Fabricio_Jorge wrote:
I think it's possible to backup/restore a single tablespace:
BACKUP TABLESPACE nome_tablespace [FORMAT 'path/bkp_file'];
Being able to backup a single tablespace is NOT the same as grafting that TS into a different database.
First, you are not really backing up a 'tablespace'. You are backing up files. In this case, just the files that implement the named TS, but files, nevertheless. And files belong to a database. Header info in each file defines, among other things, the dbid of the database the file belongs to. And the current scn. That will be a severe mis-match if you tried to 'restore' it to some other db.

Can I plug in (restore) an RMAN tablespace backup into another DB ?

11.2.0.3/AIX 6.1
We accidently dropped a development DB without taking the latest expdp backup of an important schema. All the objects on this schema belonged to only one tablespace and we have the RMAN backup of that tablespace. Is there anyway we could recreate that schema by restoring the tablespace backup into another database ?

Yes.
Use the TRANSPORT TABLESPACE feature/method :
http://oracle.su/docs/11g/backup.112/e10643/rcmsynta2021.htm
Also check out sys.dbms_tts.transport_set_check
RMAN> transport tablespace emp_data, emp_data2
tablespace destination '/u01/app/oracle/oradata'
auxiliary destination '/u04/app/oracle/oradata';If you need to check your endian format use this query :
SELECT
PLATFORM_NAME,
ENDIAN_FORMAT
FROM
V$TRANSPORTABLE_PLATFORM;http://www.fadalti.com/oracle/database/how_to_transportable_tablespaces.htm
http://husnusensoy.wordpress.com/2008/07/12/migrating-data-using-transportable-tablespacetts/
Best Regards
mseberg

Restore RMAN tablespace backup...

Hi All,
I have a RMAN backup of entire database, it has all oracle default TBS, controlfile, spfile etc. Now, I want to restore only one schema's tablespace so my first question it is possible to restore only one schema's tablespace. If yes, can you please guide me here?
Thanks in advance.

user12115 wrote:
Hi Hemant,
I want to restore tablesapce back to another database server. Can I have any suggestion for this scenario?
Thanks...You cannot restore backup of one database to another database. You have options as
1) restore entire database but skip tablespaces whatever you don't want (or) while restoring mention all the mandatory tablespaces with extra what tablespaces you want
Because two databases incarnations / SCN are completely different.
2) perform scheme export usin exp/expdp & import it.
>
Handle:     user12115
Status Level:     Newbie
Registered:     Aug 10, 2005
Total Posts:     332
Total Questions:     105 (93 unresolved)
>
Your almost all questions are unanswered, looks sad that no one helpful to you... Please consider closing your threads and keep the forum clean.
Edited by: CKPT on Jun 15, 2012 2:22 PM

Rman tablespace backup script required

Dear Guru,
Thanks a lot, it start working...as the policy has set to 7 days retention period...
i have another issue if you can help me, i have whole apps running on only two tablespace docv,docvindex
rest by using this script i have to take backup every day entire database that occupied unncessary space, can you help me to revised the script..thank you in advanced sir
connect target sys/sys@ORCL;
run
allocate channel h1 type disk format="E:\bkup_orcl\%t_%u";
allocate channel h2 type disk format="E:\bkup_orcl\%t_%u";
backup database tag=dailybak;
backup current controlfile tag=ctlbak;
sql 'alter system archive log current';
backup archivelog all ;
release channel h1;
release channel h2;
regards,
salim shahzad

Kuljeet Pal Singh wrote:
cat db_rman.sh
<<all oracle environment variable>>
CUR_DATE=`date +%d%m%y`
export CUR_DATE
DT=`date +%d%m%y_%H-%M`
export DT
LOG_DEST=/u02/backup/TAPE_Backup_Log
export LOG_DEST
rman target / catalog db_cat/password@rmanprod log=$LOG_DEST/RMAN_$DT.log <<EOF
run {
backup archivelog all to destination '/oracle/oracle/.Arch_bkp/';
delete archivelog until 'sysdate-10';
}I am in nocatalogue database.
exit
EOF

RMAN tablespace point -in-time recovery

Hi Experts,
while recovering TSPITR, I have received this error...
sql statement: alter database mount clone database
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 05/07/2007 05:06:12
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of sql command on clone_default channel at 05/07/2007 05:06:12
RMAN-11003: failure during parse/execution of SQL statement: alter database mount clone database
ORA-01102: cannot mount database in EXCLUSIVE mode
Please help me..
Thanks
Shaan

Is this problem on LINUX database? If so, are there multiple databases running on this server? Or the primary database name and the cloning databse name are same?
If your answer is YES to all the above questions, this is due to BUG on linux for instance locking issues.
Check the alert log of clone database, there are workaround, search on the net.
Jaffar

Restore the dropped tablespace using RMAN?

Hello,
I have done a oracle tablespace re-org for PSAPPOOLD,PSAPPOOLI. Now I want to restore only the OLD PSAPPOOLD,PSAPPOOLI tablespace using TAPE backup via RMAN.
The probelm is I have dropped the old tablespace during re-org which is a part of the re-org. Is it possible to restore the dropped tablespace using RMAN?
My Oracle version is 9.2.05
if anyone has done this before, please share your valuable ideas.
I wrote the below script for the restore.
run {
allocate channel ch1 type sbt_tape;
startup nomount
restore controlfile; -
>(I guess,if I restore old control file, I might get old structure which help the restore of TB)
alter database mount ;
restore tablespace PSAPPOOLD,PSAPPOOLI;
recover tablespace PSAPPOOLD,PSAPPOOLI;;
release channel ch1;
Thanks,
Arjun
Edited by: Arjun Venkateswarlu on Jul 31, 2009 6:40 PM

> I have done a oracle tablespace re-org for PSAPPOOLD,PSAPPOOLI. Now I want to restore only the OLD PSAPPOOLD,PSAPPOOLI tablespace using TAPE backup via RMAN.
>
> The probelm is I have dropped the old tablespace during re-org which is a part of the re-org. Is it possible to restore the dropped tablespace using RMAN?
Hello Arjun,
why would you want to do this?
What is is you want to achieve by this action?
BTW: it's not possible to do that.
Check [Performing RMAN Tablespace Point-in-Time Recovery|http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtspit.htm].
You want a "Tablespace point in time recovery" (TSPITR) for a dropped tablespace and that is just not possible with RMAN.
So, the easiest way for you to get this tablespace back would be to restore and recover the database to a different host.
Ah, while we're at it: using RMAN outside the BRTOOLS is not supported by SAP - so you better be a wiz with it because there won't be much help in case anything does not work.
regards,
Lars

ORA-00959: tablespace 'rman' does not exist

Dear all
i using oracle 10g,when i creating create catalog tablespace "rman"; given this error ora-00959: tablespace rman not exist
i have done already this
step-1
SQL> create tablespace rman
2 datafile 'e:\vvelren\rman.dbf' size 6208k reuse
3 autoextend on next 64k maxsize 3267m
4 extent management local
5 segment space management auto;
step-2
SQL> create user rman identified by rman
2 default tablespace rman
3 temporary tablespace temp
4 quota unlimited on rman;
step 3
SQL> grant connect,resource,recovery_catalog_owner to rman;
tablespace rman and datafile is showing in dictionary and also online
after connect to target database
rman> create catalog tablespace "rman";
given this error-> ORACLE error from recovery catalog database: ORA-00959: tablespace 'rman' does not exist
i am unstand where i am mistake.

after connect to target database
rman> create catalog tablespace "rman";
given this error-> ORACLE error from recovery catalog database: ORA-00959: tablespace 'rman' does not existYou have to connect to the recovery catalog database not the target one. Also RMAN tablespace has to be created in the recovery catalog database. Hope you created there only.

Creation of standby db in ASM fails.

We are using dataguard to help us migrate off of ocfs and over to ASM. I am attempting to create the standby database and believe that I have all of the parameters setup correctly e.g. db_file_name_convert and log_file_name_convert but when I run my rman script that uses duplicate to create the standby db I get the following errors during standby db creation when rman attempts to mount the standby db right after the standby control files are created.
channel dev_0: restored backup piece 1
piece handle=fljsnrg1_1_1 tag=TAG20081009T145109
channel dev_0: restore complete, elapsed time: 00:06:36
output filename=+DATA_DG/rcidb/control01.ctl
output filename=+REDO_DG/rcidb/control02.ctl
Finished restore at 14-OCT-08
sql statement: alter database mount standby database
released channel: dev_0
released channel: dev_1
released channel: dev_2
released channel: dev_3
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/14/2008 15:12:05
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of sql command on clone_default channel at 10/14/2008 15:12: 05
RMAN-11003: failure during parse/execution of SQL statement: alter database moun t standby database
ORA-15171: invalid syntax in the alias path after 'RCIDB/'
RCIDB is the name of our db and the directoty exists in the correct ASM disk group but still we get the error ORA-15171: invalid syntax in the alias path after 'RCIDB/'
Has anyone encountered the same.
Thanks.

SQL> show parameter control
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string +DATA_DG/rcidb/control01.ctl,
+REDO_DG/rcidb/control02.ctl
SQL> show parameter db_file_name_convert
NAME TYPE VALUE
db_file_name_convert string /opt/oracle/oradata/oradata1/,
+DATA_DG/RCIDB/, /opt/oracle/
oradata/oradata2/, +DATA_DG/RC
IDB/, /opt/oracle/oradata/orad
ata3/, +DATA_DG/RCIDB/, /opt/o
racle/oradata/oradata4/, +DATA
_DG/RCIDB/, /opt/oracle/oradat
a/oraindex/, +DATA_DG/RCIDB/,
/opt/oracle/oradata/oraindex1/
, +DATA_DG/RCIDB/, /opt/oracle
/oradata/oraindex2/, +DATA_DG/
NAME TYPE VALUE
RCIDB/, /oradata2/, +DATA_DG/R
CIDB/
SQL> show parameter log_file_name_convert
NAME TYPE VALUE
log_file_name_convert string /opt/oracle/oradata/oradata1/,
+REDO_DG/RCIDB/, /opt/oracle/
oradata/oraindex1/, +REDO_DG/R
CIDB/
SQL> show parameter db_create_file_dest
NAME TYPE VALUE
db_create_file_dest string +DATA_DG
SQL> show parameter db_create_online
NAME TYPE VALUE
db_create_online_log_dest_1 string +REDO_DG
db_create_online_log_dest_2 string
db_create_online_log_dest_3 string
db_create_online_log_dest_4 string
db_create_online_log_dest_5 string

Rman backup with standby database

Hi All,
I am looking for some suggestions for rman backup with standby database with datagaurd but no active DG. I wanted to do a rman tablespace backup. but I am stuck at sql 'alter system archive log current' in rman with standby as target. which gives following errors with or without noswitch clause
RMAN> sql 'alter system archive log current noswitch';
sql statement: alter system archive log current noswitch
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 10/05/2013 18:15:12
RMAN-11003: failure during parse/execution of SQL statement: alter system archive log current noswitch
ORA-01109: database not open
Recovery Manager: Release 11.2.0.1.0
Oracle databaes Release 11.2.0.1.0 64 bit
OS:RHEL 6 x86-64 bit
Secondly, do I need to cancel manged recovery while taking rman backups on standby.
I scanned thru MOS but could find solutions for rman with active DG.
Thanks in advance

726d07e6-b870-431f-8c22-a499c3ec4e0c wrote:
Hi All,
I am looking for some suggestions for rman backup with standby database with datagaurd but no active DG. I wanted to do a rman tablespace backup. but I am stuck at sql 'alter system archive log current' in rman with standby as target. which gives following errors with or without noswitch clause
RMAN> sql 'alter system archive log current noswitch';
sql statement: alter system archive log current noswitch
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 10/05/2013 18:15:12
RMAN-11003: failure during parse/execution of SQL statement: alter system archive log current noswitch
ORA-01109: database not open
Recovery Manager: Release 11.2.0.1.0
Oracle databaes Release 11.2.0.1.0 64 bit
OS:RHEL 6 x86-64 bit
Secondly, do I need to cancel manged recovery while taking rman backups on standby.
I scanned thru MOS but could find solutions for rman with active DG.
Thanks in advance
"I scanned thru MOS but could find solutions for rman with active DG."
Howto make a consistent RMAN backup in an Standby database in Active DataGuard mode (Doc ID 1419923.1)

RMAN backup in tapes

Hi
We have R12.0.6 with 10.2.0.4 database.
The RMAN backup is daily we are taking to tapes.
Now how can i restore the backup from tapes? to create a duplicate database.
Thanks
Shaik

We have R12.0.6 with 10.2.0.4 database.
The RMAN backup is daily we are taking to tapes.
Now how can i restore the backup from tapes? to create a duplicate database.Creation Of Rman Duplicate Without Target And Recovery Catalog Connection. [ID 1113713.1]
Backup and Recovery
http://www.oracle.com/pls/db102/portal.portal_db?selected=3
Thanks,
Hussein

Unable to register database in RMAN - RedHat 6.2 + Oracle 8.1.6

Is this a bug?? pls suggest the way out...
-Balaji
([email protected])
1. Create rman Tablespace
=============================
create tablespace TS_RMAN
datafile '/u01/orauser/oradata/mydb/TS_RMAN.dbf'
size 5M
autoextend on;
2. Create rman user
=============================
create user rmanusr identified by rmanusr
default tablespace TS_RMAN
temporary tablespace TEMP
quota unlimited on TS_RMAN;
3. Grant roles to rman user
==================================
grant connect, resource,recovery_catalog_owner to rmanusr;
4. I'm logging on the server directly
$rman target system/manager catalog rmanusr/rmanusr
5. RMAN> create catalog tablespace TS_RMAN
.... catalog created!
6. RMAN> register database;
... gives me all these errors messages >>
RMAN> register database;
RMAN-03022: compiling command: register
RMAN-03023: executing command: register
RMAN-08006: database registered in recovery catalog
RMAN-03023: executing command: full resync
RMAN-03026: error recovery releasing channel resources
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-07005: error during channel cleanup
RMAN-07004: unhandled exception during command execution on channel default
RMAN-10032: unhandled exception during execution of job step 1:
RMAN-10031: ORA-65535 occurred during call to DBMS_BACKUP_RESTORE.DEVICESTATUS
RMAN-03008: error while performing automatic resync of recovery catalog
RMAN-07004: unhandled exception during command execution on channel default
RMAN-10032: unhandled exception during execution of job step 1:
ORA-01403: no data found
RMAN-10031: ORA-65535 occurred during call to DBMS_BACKUP_RESTORE.GETPARM
------ end of message -------

Is this a bug?? pls suggest the way out...
-Balaji
([email protected])
1. Create rman Tablespace
=============================
create tablespace TS_RMAN
datafile '/u01/orauser/oradata/mydb/TS_RMAN.dbf'
size 5M
autoextend on;
2. Create rman user
=============================
create user rmanusr identified by rmanusr
default tablespace TS_RMAN
temporary tablespace TEMP
quota unlimited on TS_RMAN;
3. Grant roles to rman user
==================================
grant connect, resource,recovery_catalog_owner to rmanusr;
4. I'm logging on the server directly
$rman target system/manager catalog rmanusr/rmanusr
5. RMAN> create catalog tablespace TS_RMAN
.... catalog created!
6. RMAN> register database;
... gives me all these errors messages >>
RMAN> register database;
RMAN-03022: compiling command: register
RMAN-03023: executing command: register
RMAN-08006: database registered in recovery catalog
RMAN-03023: executing command: full resync
RMAN-03026: error recovery releasing channel resources
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-07005: error during channel cleanup
RMAN-07004: unhandled exception during command execution on channel default
RMAN-10032: unhandled exception during execution of job step 1:
RMAN-10031: ORA-65535 occurred during call to DBMS_BACKUP_RESTORE.DEVICESTATUS
RMAN-03008: error while performing automatic resync of recovery catalog
RMAN-07004: unhandled exception during command execution on channel default
RMAN-10032: unhandled exception during execution of job step 1:
ORA-01403: no data found
RMAN-10031: ORA-65535 occurred during call to DBMS_BACKUP_RESTORE.GETPARM
------ end of message -------

Db2 command for create tablespaces of DB2 V9.1.3

Dear All,
Currently, Ive run prepare for upgrade SAP form 4.6C/DB2 9.1.3 to ECC6.
But, I dont know to db2 command for create tablespaces as below.
Could you please example the DB2 command for create tablespaces as below.
ERROR> Insufficient free space in the database as follows:
Please refer to file DBFPLUSD.RES for more details and dditional information about the results of the free space check on DB6 !!!
ERROR> Create tablespace PSAPDIMD with 120 MB
ERROR> Create tablespace PSAPDIMI with 120 MB
ERROR> Create tablespace PSAPODSD with 130 MB
ERROR> Create tablespace PSAPODSI with 130 MB
ERROR> Create tablespace PSAPFACTD with 120 MB
ERROR> Create tablespace PSAPFACTI with 120 MB
ERROR> Create tablespace PSAPEL700D with 420 MB
ERROR> Create tablespace PSAPEL700I with 220 MB
ERROR> Create tablespace PSAPES700D with 21290 MB
ERROR> Create tablespace PSAPES700I with 5420 MB
Thanks in advance
Regards,
Jaturong P.

Hi,
During the PREPARE phase normally it creates a script which you can run for the creation of these Tablespaces,this script can be found in the Upgrade directory(eg:/usr/sap/put/log/DB6TBSXT.CLP - this script will have the command to create the tablespaces).Just run this script,it will create all the tablespaces based on the requirement.
Regards,
Sam
Edited by: Cheriyan Sam on Apr 22, 2008 9:12 AM

Creation of RMAN Tablespace

Similar Messages

Maybe you are looking for