Creation of Setup package Failed

Hi all,
I tried creating setup package for individual User.
However it is giving me error in Log viewer.
1. Level 0010 tc.mobile.admin.bl : Message:Creation of virtual mi instance failed.
2.Level:0050 tc.mobile.admin.bl.setup: Message:Reading the location of the packages folder failed. Cannot continue with package generation.
3.Level:0050 tc.mobile.admin.bl.setup Message:The property MISP is not configured. Check settings of service Configuration Adapter under the root mobile_setupGeneration
Can anyone help me on this.
Thanks and Regards:
Neha Kapoor

Hi Neha,
There is some mistake in understanding here.
Framework will be always MOBILEENGINE_JSP OR MOBILEENGINE_AWT. and not MAU. There is no need to create an sda file for framework. The mobile component for Framework will get created when your basis administrator deploys the NWMCLIENT. Once it is deployed reload it.
Please follow these steps.
1. Create one DC, assign MOBILEENGINE_JSP (mobile component) with version that is deployed, say 1002 (If SP10 Patch 02). Assign OS condition to this DC.
2. Create one more DC for Application, Assign your application as before.
3. Assign both the DCs to the hierarchy group.
4. Create setup package for one of the users in the setup package. may be MI_SERVICE.
There will not be any framework mobile component with version R01. It will be something like 1903 which means SP19 Patch 03. R01 may be the one created by someone which cannot be used for Setup package.
Regards,
Prashanth

Similar Messages

Create setup package failed

Hello,
I try to create a setup package in NetWeaver Mobile Administrator. I created a device configuration with the framework and one with DB2E and XMAM application.
I assigned this to a hierarchy and added the technical user mi_service.
When I create a package it stops and in the log viewer I see :
0050 tc.mobile.admin.bl 172815 20070223 Retrieving device id failed.
In the step before (which is OK) I see:
0070 tc.mobile.admin.bl 172812 20070223 Set the communication server port to 45001
Which port is this? Don't know this one...
Anyone else got this problem?
Kind regards,
jeroen

Hi Jeroen,
when you do setup package creation leveraging the NWMA you have to use a platform based on WIN32. Say your J2EE needs to run on a Windows 32 Box. If you run your J2EE on a different platform you can setup an additional J2EE for SPC. Refer to the how to guides section for doing so (e.g. for NW04 see https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80046076-a387-2910-4ba2-c009be46ab60).
What SPC does is simulating a typical user installation, say it installs a client on the J2EE, syncs to get a device ID, syncs again to get apps and data. In the end all gets packed together.
If you get the error that the device ID cannot be received it can have several reasons:
- Client cannot startup on the J2EE (e.g. unsupported platform)
- Services not correctly enabled in SICF (e.g. not active, wrong service user/password)
What you can do is check in the SPC Folder on the J2EE for the temporary installation folder and check the client traces, they will typically point you to a solution. Since SP19, I guess, these logs can as well be downloaded in the NWMA (where typically the setup package would be ready for download).
Hope this helps,
Thomas
PS: If you keep stuck may post the log files of your tmp client

Creation of upgrade packages fails

Dear all
We did an upgrade from 4.0 to 2007, but now found out among other things that the MUP definition in the upgrade console was not updated. As such if we now want to create a new upgrade package with the predefined units (BOL, BDOc and UI) the creation of these units fails as some files are missing.
Does anybody know: Were the units redefined when upgrading to 5.0? And if so, how can I get my hands on one of these as I do not want to try and build the UI and BOL packages myself from scratch.
Thanks in advance,
Kai

Thanks Shankar,
The not does not apply (as 2007 SP2 which we are on is 5.0SP11 and the note is SP09 only), but via connecting notes I found the note 1156416 (did not help) and finally 1171933 which provided the correct solution.
Regards, Kai
Edited by: Kai Blanke on Jan 16, 2009 10:35 AM
Set question to solved

Update Content and Creation of New Packages Fails, Errors in PKGXFERMGR.log

I am having a problem distributing packages to Distribution Points. This has worked for over a year previously. I believe there may be a problem with IIS configuration somewhere but I cannot find what the delta may be.
When I look at the pkgxfermgr.log I see several things.
First, I see the jobs that I have started are stuck in a pending state. Example below:
==== Found 19 send requests in outbox D:\Program Files\Microsoft Configuration Manager\inboxes\PkgTransferMgr.box\requests.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UESC1~ Job: J4YJMEGH Destination: PPWMDP12A.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:52~ Start: 12:00 Finish: 12:00 Retry: 11:22~
SWD PkgID: SC1001EB SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UFSC1~ Job: JPZJ1IM3 Destination: PPWMDP12B.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:52~ Start: 12:00 Finish: 12:00 Retry: 11:22~
SWD PkgID: SC1001EB SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UGSC1~ Job: J8OKU91R Destination: PPWMDP12A.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:45~ Start: 12:00 Finish: 12:00 Retry: 11:15~
SWD PkgID: SC1001EC SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UHSC1~ Job: JM51YI72 Destination: PPWMDP12B.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:45~ Start: 12:00 Finish: 12:00 Retry: 11:15~
SWD PkgID: SC1001EC SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
Send Request 202UISC1~ Job: J5C9KJX1 Destination: PPWMDP12A.childrens.sea.kids~ State: Pending Status: Action:
None~ Total size: 0 k Remaining: 0 k Heartbeat: 10:25~ Start: 12:00 Finish: 12:00 Retry: 10:55~
SWD PkgID: SC1001ED SWD Pkg Version: 1
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:23 AM
2204 (0x089C)
For each job, I see the following for errors:
Checking for sending capacity. Used 0 out of 15.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
COutbox::TakeNextToSend(pszSiteCode) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
Retrieved the snapshot for priority 2, there are 2 files in the snapshot.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Found send request. ID: 202VSSC1, Destination: PPWMDP12B.childrens.sea.kids
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Checking for sitesystem-specific sending capacity. Used 0 out of 5.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Created sending thread (Thread ID = 0xF94) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
COutbox::TakeNextToSend(pszSiteCode) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
Retrieved the snapshot for priority 2, there are 1 files in the snapshot.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Found send request. ID: 202VTSC1, Destination: PPWMDP12A.childrens.sea.kids
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Checking for sitesystem-specific sending capacity. Used 0 out of 5.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Created sending thread (Thread ID = 0xCA8) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
COutbox::TakeNextToSend(pszSiteCode) SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
No (more) send requests found to process. SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3340 (0x0D0C)
Waiting for new/rescheduled send requests, Maximum Sleep Time = 60 minutes
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3340 (0x0D0C)
Sending thread starting SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Sending thread starting SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
STATMSG: ID=8206 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=PPWMCM12.childrens.sea.kids SITE=SC1 PID=4124 TID=3988 GMTDATE=Tue Aug 05 17:53:02.480 2014 ISTR0="SC1001F4" ISTR1="PPWMDP12B.childrens.sea.kids"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="SC1001F4" AID1=410 AVAL1="4" AID2=404 AVAL2="PPWMDP12B.childrens.sea.kids"
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
STATMSG: ID=8206 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=PPWMCM12.childrens.sea.kids SITE=SC1 PID=4124 TID=3240 GMTDATE=Tue Aug 05 17:53:02.482 2014 ISTR0="SC1001F4" ISTR1="PPWMDP12A.childrens.sea.kids"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="SC1001F4" AID1=410 AVAL1="4" AID2=404 AVAL2="PPWMDP12A.childrens.sea.kids"
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Package file = SC1001F4.PCK.DLT.0.4 SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
Performing preactions package SC1001F4, Distribution point PPWMDP12A.childrens.sea.kids
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Package file = SC1001F4.PCK.DLT.0.4 SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Performing preactions package SC1001F4, Distribution point PPWMDP12B.childrens.sea.kids
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
CContentDefinition::GetFileProperties failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
CContentDefinition::TotalFileSizes failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Sending content Content_2a01d5d7-7f70-4bea-87f2-33ed3d269b31.1 for package SC1001F4
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Redistribute=0, Related=Content_fbf0e24d-92a6-4196-8801-047e11ecb9dc
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Not copying: LMConsole.msi SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
CContentDefinition::GetFileProperties failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
CContentDefinition::TotalFileSizes failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Sending content Content_2a01d5d7-7f70-4bea-87f2-33ed3d269b31.1 for package SC1001F4
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Redistribute=0, Related=Content_fbf0e24d-92a6-4196-8801-047e11ecb9dc
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
No related content file with hash '0B7780EBC729C5835E666C5EF183118FA79E9DF55B2772954CB172B071D948B3', exists on the DP, binary delta replication will not be used.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
CSendFileAction::SendFiles failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
CSendFileAction::SendFiles failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Notifying pkgXferJobMgr SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
Sending failed. Failure count = 4, Restart time = 8/5/2014 11:23:02 AM Pacific Daylight Time
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Not copying: LMConsole.msi SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Sent status to the distribution manager for pkg SC1001F4, version 4, status 4 and distribution point ["Display=\\PPWMDP12A.childrens.sea.kids\"]MSWNET:["SMS_SITE=SC1"]\\PPWMDP12A.childrens.sea.kids\
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
STATMSG: ID=8211 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=PPWMCM12.childrens.sea.kids SITE=SC1 PID=4124 TID=3240 GMTDATE=Tue Aug 05 17:53:02.687 2014 ISTR0="SC1001F4" ISTR1="4" ISTR2="PPWMDP12A.childrens.sea.kids"
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="SC1001F4" AID1=410 AVAL1="4" AID2=404 AVAL2="["Display=\\PPWMDP12A.childrens.sea.kids\"]MSWNET:["SMS_SITE=SC1"]\\PPWMDP12A.childrens.sea.kids\"
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3240 (0x0CA8)
Sending thread complete SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3240 (0x0CA8)
No related content file with hash '0B7780EBC729C5835E666C5EF183118FA79E9DF55B2772954CB172B071D948B3', exists on the DP, binary delta replication will not be used.
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
CSendFileAction::SendFiles failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
CSendFileAction::SendFiles failed; 0x80070003
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Notifying pkgXferJobMgr SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Sending failed. Failure count = 4, Restart time = 8/5/2014 11:23:02 AM Pacific Daylight Time
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Sent status to the distribution manager for pkg SC1001F4, version 4, status 4 and distribution point ["Display=\\PPWMDP12B.childrens.sea.kids\"]MSWNET:["SMS_SITE=SC1"]\\PPWMDP12B.childrens.sea.kids\
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
STATMSG: ID=8211 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_PACKAGE_TRANSFER_MANAGER" SYS=PPWMCM12.childrens.sea.kids SITE=SC1 PID=4124 TID=3988 GMTDATE=Tue Aug 05 17:53:02.741 2014 ISTR0="SC1001F4" ISTR1="4" ISTR2="PPWMDP12B.childrens.sea.kids"
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=3 AID0=400 AVAL0="SC1001F4" AID1=410 AVAL1="4" AID2=404 AVAL2="["Display=\\PPWMDP12B.childrens.sea.kids\"]MSWNET:["SMS_SITE=SC1"]\\PPWMDP12B.childrens.sea.kids\"
SMS_PACKAGE_TRANSFER_MANAGER 8/5/2014 10:53:02 AM
3988 (0x0F94)
Sending thread complete SMS_PACKAGE_TRANSFER_MANAGER
8/5/2014 10:53:02 AM 3988 (0x0F94)
Any help would be greatly appreciated.

Hi,
0x80070003 = The specified path couldn't be found.
Please try to disable the AV software.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Timeout setting in setup package server

Hi All,
We wanted to change the time out setting in our Middleware server(Windows platform wintel) from present 120 mins to 180 mins which is used for creation of setup package.Where we can change the timeout setting in server.Please give me the path or location ..
Thanks in advance
Devendra

Hi,
I am not sure about the native Jboss JTA, but in general the following is true:
-the transaction timeout determines when 'pending' transactions are cleaned up by the JTA
-the larger the value, the longer the time that such transactions can be around
The performance impact depends on the particularities of your application and server environment; to name a few:
-For hot-spot data in your database, transactions will normally have to wait longer to get locks held by other transactions. If the timeout is too short then the clients will see many requests fail because the underlying transaction will timeout before the locks are gotten, and the JTA will rollback.
-On the other hand, if (for some reason) you have failing requests that leave active transactions floating in the server, then a larger timeout will mean that such floating transactions will not release their locks yet (happens at rollback/commit only). So here a larger timeout means that lost transactions (that will rollback anyway) will prevent other transactions from doing business.
-The same argument holds for deadlocks. If a transaction is involved in a deadlock situation then the deadlock will not be resolved until the transaction rolls back after timeout. In this case too, the other transactions are hindered by the locks of a 'lost' transaction.
As a rule of thumb, I would say: keep transaction timeout as high as necessary to allow most transactions to get 'useful' locks (but not much higher than that). For instance, you could measure the statistics on response times under realistic loads and base your timeout value on that (if you're not measuring the deadlocks of course).
Best,
Guy
http://www.atomikos-support.com:8080/forums -- Java/J2EE/JTA Transactions Forum

Error in Setup Package - yellow state

Hi Expert,
I have a problem when you build a setup package for a PDA.
When creating the PDA and leave in an "initial" and press the button to create setup package, the monitor always shows yellow status. The TX: SMQ2 indicates no queue run.
I have implemented the USE_BULK_INSERTS parameter in DOE CONFIGURATION.
Some idea of the problem?
Thanks.

Hi Kranti,
The container is ESWT, and has all the necessary components:
MCD Name          MCD Version
DB2E_PPC          914
NATIVE_PPC          711001
OCA_RT               711001
PDA_CORE          711001
SKELETON          711001
WDLContainerUI     711001
eSWT_PPC          711001
The Queue Details:
Number of Unread Messages: 3.215
Number of Unread Messages: 11.586.426
To trigger the creation of setup package, the monitor displays in task yellow status, and associate TX:SDOE_SETUP not shows nothing. The device status changes to "Pending for Registration" and you can not re-creating the setup package.
The problem apparently occurs when the Setup Data is more than 5MB, since when is less than this, the setup package is created and appears in TX: SDOE_SETUP
Any ideas because as much Data, the setup is not generated?
Thanks

Retrieving device id failed while trying to create setup package

Hi,
We are on SAP MI 2.5 ; SP21 (NW2004). I am trying to create a setup package including the following:
1. DB2E version 912
2. MI2.5 SP18 Framework
3. Addon MI 2.5 SP21 (to pacth MI SP18 to MI SP21)
4. MAU 3.0 SP05
I have included the device configuration in the sequence that they appear above into a Hierarchy Group and assigned users to this group.
When trying to create the set up package for any of these users I get the following error:
0050 tc.mobile.admin.bl ; 172344 20080331 Retrieving device id failed.
The last successful statement in the log Viewer is (i.e. before the above error appears)
"Set the communication server port to 45004"
Any help would be much appreciated.
Thank in advance.
Kind Regards
Mike

Hi Sivakumar,
Thank you very much for quick response.
I have tried what you have suggested. It doesn't throw an error any more but the setup package creation is not completed. Looking at the log viewer It seems that it stuck at the following point:
0070 tc.mobile.admin.bl ; 174044 20080401 Set the communication server port to 45013
0070 tc.mobile.admin.bl ; 174044 20080401 Retrieving device id.
This point is the same that was previously kicking the error.
Any suggestion would be much appreciated.
Thank you in advance.
Kind Regards
Mike

KB2879017 setup error - failed to migrate dependent packages

Hi this error "KB2879017 setup error - failed to migrate dedpendent packages" during installation of Microsoft Security pacthes at Windows XP SP3 pc . I'm using IE7 (version 7.0.5730.13) . Below logs the error. Anyone can advice?
275.407: Destination:C:\Program Files\internet explorer\iexplore.exe (7.0.6000.21357)
275.407: UpdateSpUpdSvcInf: Source [ProcessesToRunAfterReboot] section is empty; nothing to do.
275.407: MigrateHotfix: Migrating hotfix KB2586448-IE8
275.407: QFE KB2586448-IE8 has no backup directory to migrate.
275.407: Migrating QFE KB2586448-IE8 with command line: update.exe -Z -Q -B:sp3qfe
289.797: Update.exe failed 1603.
289.797: MigrateHotfixes: Migration of KB2586448-IE8 failed
289.797: DoInstallation: Migration failed
290.641: Failed to migrate dependent packages.
351.032: Message displayed to the user: Failed to migrate dependent packages.
351.032: User Input: OK
351.032: Update.exe extended error code = 0xf0ea
351.032: Update.exe return code was masked to 0x643 for MSI custom action compliance.

This forum is for questions and issues with the MAP Toolkit. You will need to post this question in a forum that is related to the software you are having trouble with.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Error while creating a setup package .

Hi ALL,
We are trying to create a setup package (SP20 client) for our application
after assinging the device configurations their roles and conditions to the Hierarchy Group which we created It gives the following error while creation of the setup package
Error
0050 tc.mobile.admin.bl 113101 20080222
Retrieving device id failed.
However we tried to dig up for it in help.sap.com and forum we could not resolve the error .
Please suggests the neccessary solution,Its urgent.
Thanks & Regards
Aditi Vyas

HI
This problem is already resolved in SP20. Kindly make use of the latest patch of NWMADMIN and NWMClient and the error should get resolved.
Best regards
Sivakumar

Creating Setup Package in Netweaver Administrator MI

Hello everybody, 
after a long searching to a clear manual about setting up Mobile Infrastructure client, and after a lot of reading the typical spaghetti manuals of SAP, I started to create a Device Configuration to test the MAM 3.0 
I have created a Device Configuration using the DB2E add-on, MOBILEENGINE_JSP Framework and a MAM30 Application:
<table>
<tr>
<td>Mobile Component Type</td><td>Mobile Component Name</td><td>Version</td>
</tr>
<tr>
<td>ADDON</td><td>DB2E</td><td>822</td>
</tr>
<tr>
<td>APPLICATION</td><td>MAM30</td><td>1.00</td>
</tr>
<tr>
<td>FRAMEWORK</td><td>MOBILEENGINE_JSP</td><td>702100</td>
</tr>
</table> 
I have an hierarchy grouping with currently only 1 user and now I want to create a setup package. In the Log Viewer of the Setup Package, I see there is a problem with Trace File: Trace File might not be available in client OR Moving Trace File into new folder failed. 
All log messages are as follows (last message is displayed first): 
0060 tc.mobile.admin.bl 125722 20100302 Trace File might not be available in client OR Moving Trace File into new folder failed 
0070 tc.mobile.admin.bl 125722 20100302 Set the communication server port to 45002 
0070 tc.mobile.admin.bl 125722 20100302 Retrieving device id and Application. 
0070 tc.mobile.admin.bl 125722 20100302 Setting mobileEngine.config connection settings completed. 
0070 tc.mobile.admin.bl 125722 20100302 Setting mobileEngine.config connection settings. 
0070 tc.mobile.admin.bl 125722 20100302 Setting mobileEngine.config persistence parameters for 2 completed 
0070 tc.mobile.admin.bl 125722 20100302 Setting mobileEngine.config persistence parameters for 2 
0070 tc.mobile.admin.bl.setup 125722 20100302 Download of DB2E addon completed 
0070 tc.mobile.admin.bl.setup 125721 20100302 Copying of Win32 dll DB2EJDBC.dll to the backup folder successful. 
0070 tc.mobile.admin.bl.setup 125721 20100302 Installation of DB2EJDBC.dll successful. 
0070 tc.mobile.admin.bl.setup 125721 20100302 Copying of Win32 dll DB2e.dll to the backup folder successful. 
0070 tc.mobile.admin.bl.setup 125721 20100302 Installation of DB2e.dll successful. 
0070 tc.mobile.admin.bl.setup 125721 20100302 Copying of Win32 dll CryptoPlugin.dll to the backup folder successful. 
0070 tc.mobile.admin.bl.setup 125721 20100302 Installation of CryptoPlugin.dll successful. 
0070 tc.mobile.admin.bl 125721 20100302 Downloading DB2E addon ...... 
0070 tc.mobile.admin.bl 125721 20100302 Creation of virtual mi instance completed. 
0070 tc.mobile.admin.bl 125721 20100302 Modify listOfJars.txt 
0060 tc.mobile.admin.bl.setup 125721 20100302 The property ME_JAVA_OPTIONS is not configured. I use default value instead. Check settings of service Configuration Adapter under the root mobile_setupGeneration 
0060 tc.mobile.admin.bl.setup 125721 20100302 The property ME_BOOTSTRAP_JARS is not configured. I use default value ; instead. Check settings of service Configuration Adapter under the root mobile_setupGeneration 
0070 tc.mobile.admin.bl 125721 20100302 Modify startup and shutdown 
0070 tc.mobile.admin.bl 125718 20100302 Folder for setup package is C:\sapdb/547243715843949 
0070 tc.mobile.admin.bl 125717 20100302 Mobile engine framework source is C:\temp/LAPTOP/MOBILEENGINE_JSP/702100 
0070 tc.mobile.admin.bl 125717 20100302 Template source is C:\temp/TEMPLATE/MDS/702100 
0070 tc.mobile.admin.bl 125717 20100302 Creation of initial software package entry successful. 
0070 tc.mobile.admin.bl 125717 20100302 Creating initial software package with generated id 547243715843949 
 
So all steps perform well, except the last about Trace File. 
Does anybody have an idea why and how to solve this. 
Thanks 
regards 
Erik
Edited by: Erik Meel on Mar 2, 2010 1:29 PM
Edited by: Erik Meel on Mar 2, 2010 1:37 PM
Edited by: Erik Meel on Mar 2, 2010 1:57 PM

I don't know why there is a different direction for path.
The C:\Temp is specified in the Visual Administrator in the property MITEMP in the Configuration Adapter.
The same for the location C:\sapdb for the MISP property.
It is the Mobile Administrator who is writing the paths with other slash. I don't know how to specify that.
Regarding the NWMICLIENT I used the file NWMCLIENT21_0-20000910.SCA which I downloaded from http://service.sap.com/swdc and then Support Packages and Patches - Entry by Application Group
Support Packages and Patches - Entry by Application Group" SAP NetWeaver" SAP NETWEAVER" SAP NETWEAVER 7.0" Entry by Component" MI Client
I didn't download the NWADMIN, but I'm also not sure how to install this. Is this with the same way as deploying mobile components?

Error while Debugging MSA 'Creation of Login Object Failed'

Dear Friends,
I am working on CRM Mobile Sales 5.0 SP 5.
I have setup my Mobile Client and Mobile Application Studion On the same machine.
I have perform the initial generation of the application from Mobile Repository server to my machine.
it gave me 6 errors and 12 warnings and took about 4 hrs for generation.
Now when i tried to debug the generated application,
i get my login screen and once I enter username and password.
Error popups up stating "Creation of login object failed".
and then another error
"Starting MPPFailed" (MPP is my project name).
Please suggest me how should i go about to debug the application solving the above errors.
Awaiting Reply,
Best Regards,
Pratik Patel

Am not sure if you were able to resolve the issue but below are some points:
a. I think the dlls sfabol and msa are not any more registerable, since they are more of VB.NET components and here assembly is registered and not the dll.
b. For logging into the application just ensure that you have user id in table SMOUSER and the employee for that user in SMOMITABT table.
c. If this is fine, then ensure that you have the latest BDOC metadata information on your laptop. I think in 5.0 also you need to use Clientconsole to download this information.
d. If this is all okay, then try running SQL profiler and check if the query to the ides db is being executed by the framework. If the query is fired then it means application seems to behave properly but the query is not retrieving relevant details.
For further details feel free to contact me..
thanks,
Piyush

Problem while creating setup package

Hi all,
A week i created a setup package With SP18 0.0 . Everything worked fine..
I download the Sca file for NWMADMIN AND NWMCLIENT and
Today i deployed Patch 0.2 to NWMADMIN and Patch 0.6 to NWMCLIENT .
I am getting these errors..
0050 tc.mobile.admin.bl 170005 20070327 Error while trying to save the download url in setup package
0050 tc.mobile.admin.bl.setup 170005 20070327 Error while trying to create the cab archive for setup package.
0050 tc.mobile.admin.bl.setup 170005 20070327 Error while trying to create a cab file for setup package.
0050 CAB CREATION LOG 170004 20070327 Error: Required file "D:\cabwiz.ddf" not found.
Thanks and Regards
Neha Kapoor

Hi Prashantha,
I could download SDK for Windows Mobile 2003-based Pocket PCs from site http://www.microsoft.com/downloads/details.aspx?FamilyID=9996b314-0364-4623-9ede-0b5fbb133652&displaylang=en&Hash=%2fiQ91xWkO3zOCMv67Sphd8Q0HdCZtTMdWz3Ec5iPNq7%2fhrGF7rmyOcGv3trXOdGA8c6Qyc%2bVOlTpsmrahqFb5A%3d%3d.
Now should i follow the steps given in http://help.sap.com/saphelp_nw04/helpdata/en/45/1eb142a174c811e10000000a1550b0/frameset.htm
And create a Cabwiz file . Can i do this on my pc and zip the file and send it to basis and copy it on server or this should be done on server itself.
Thanks and Regards
Neha Kapoor

Automating creation of the package and feature GUID

Hi Folks,
Is there any way to do automation
process to changing the GUID while creating a wsp. (Visual studio)
Please let me know and assist me,if have any material available about automating creation of the package and feature GUIDs.
Thanks,

Hi Jio333,
Since this forum is discussing about ClickOnce and Setup, and your issue is more related with SharePoint Solution Packages, I will move this thread to the more related forum.
Reference:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=sharepointdevelopment
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Setup Package NTW04s Sp15 :"Could not retrive device Id" and other

Dears,
we configured the setup package creation with NTW04s SP15:
One device configurator for the MI70 Client Jsp; one device configurator for the DB2e;
one device configurator for the MAM application.
We defined the Parameter Set into the device configurator for the MI70 client.
We assigned these device configurator to the Hierarchy group and used a technical user for the setup package creation.
The creation aborts with the error 'Could not retrive device ID'
Beside we try to define an installation sequence number for these device configurator, to be sure the MI70 client is installed as first with the proper parameter set, the DB2E as second and the MAM as lates but it's not clear how to do it.
If we assign inst. sequence 1 to the MI70 client the NWA says something like 'cannot assign sequence number to framework', while if we assign 1 to the DB2E we recive a msg like 'sequence number are not consecutive...'
regards

up pls
we suspect the Setup Package creation is not allowed on Windows 64 bit.
Probabily the natstart.dll cannot work properly as it is on 64 bit, as maybe it is designed to run on 32 bit , as the windows pc are.
But we used Windows in order to be able to use the setup package creation, we cannot setup up a separate J2EE istance on 32 bit just for the setup package creation.
Beside now the NTW04s sr3 is supported only on 64 bit platform.
Any advise ?
Regards

CC 2014 - Packaging fail : nothing happen further the instruction windows

Hi,
I have a problem packaging my file on InDesign CC (2014) :
Nothing happen after the instruction windows.
Neither window, nor message. However InDesign quitting as soon as i close the file with which the packaging fail to occur.
I could do it until a few days ago (all with the pdf and idml creation option), I did no update of any sort (adobe, apple or other), yet i can't package anymore.
Regards,
FDurand

Hi,
I solve my problem by erasing InDesign preferences (Library > Prefrences > InDesign).
FDurand

Creation of Setup package Failed

Similar Messages

Maybe you are looking for