Creative I-trigue 3500 and MuVo TX

Hi, i recently purchased a creative i-trigue 3500 and i already own a muvo tx 256. I was lookin forward to using the M-port on the I-trigue to play music, but when i plug the USB part into the Mport and start the device, no music =(
The speakers themselves works fine and looks even better, but im quite bummed about the Mport not working with my player. I looked at the manual and it said it supports muvo NX. Kinda dumb for creative to make a new speaker system to support an older muvo and not the new one
I updated my muvo TX with the .0.05 firmware and still nothing.
Im really hoping that someone can help me out here.
Thanks much

Duplicate post.
Jason

Similar Messages

  • What is the difference between Creative I-Trigue 2300 and 2200?

    Hello,
    i found on your webpage the sound speakers I-Trigue 2200, on Amazon and other webpages i found the Creative i-trigue 2300. But i dont find anything about this sound speakers on your page - is this the new model of the i-trigue 2200? The 2300 have a little bit different design.
    Thanks a lot.
    best regards

    Hi,
    The 2300 has a much more sleek design than the 2200 and the Bass performance of 2300 is enhanced with it's BasXPort. But nevertheless, both are good 2.0 audio speakers.
    You could find more information for the Itrigue 2300 here.
    Cheers.

  • Creative I-Trigue 3000i, 2.1 Speakerset and Ipod Nano

    Does anyone know if the Creative I-Trigue 3000i, 2.1 Speakerset,ncl. iPod dockingstation work with the 4th gen ipod Nano?
    if not does any of the speaker syestems.
    Thanks

    Hi Justcook,
    You might want to get in touch with the online store. They should be able to assist you with your enquires.

  • Creative I-Trigue 3400 Spares

    Hi,
    I have owned the speakers Creative I-Trigue 3400 for a few years now, they do the job fine. However recently the Wired remote control with bass level control has broke, I do not really want to replace these speakers as I think they are great, I do not want to buy the whole package again becuse the subwoofer and speakers are still in good condition.
    Therefore I was wandering if there is a place where I can buy spare parts for it's Or any other user which has spares for this item. (I am in the UK) I have tried e-bay but with no luck.
    Any help would be appreciated.
    Thanks
    Nas

    I have the same question. I compare the 3500 to several other systems and found it to be superior. I did not test against the 3400, which is a different design concept. I tested against the 3300 which I did not like at all.

  • Creative I-Trigue 3400 or L3500?

    I recently bought a Mac Mini which has a built in 2.1 sound card so i'm looking at getting either the Creative I-Trigue 3400 or L3500, at first i was leaning towards the L3500 since they have more power but then it sounds like the 3400 has better sound?
    I will be mostly using these speakers to listen to Music, maybe watch some videos now and then and some very little gaming, so what would you all reccomend?
    Thanks in advance.

    I have the same question. I compare the 3500 to several other systems and found it to be superior. I did not test against the 3400, which is a different design concept. I tested against the 3300 which I did not like at all.

  • Creative I-Trigue 2.1 (3300) Left channel not working

    Just recently purchased the Creative I-Trigue 2.1 (3300) for my boyfriend's gaming station. I have his audio settings set to 2.0 CH speakers, and have the thing plugged into the appropriate hole. The subwoofer works, the right speaker works, but there is no sound comming out of the left. I discovered that the satellite speakers themselves are operational by individually plugging them into the right speaker output line on the back of the subwoofer, but neither of the speakers work when I plug them into the left audio output line in the back of the subwoofer. I have come to the conclusion that the subwoofer is possibly defective.
    Just to rule out any other possible errors on my part, I've tried it on three different computers with the same result. The equalizer settings on all computers are not skewed.
    Please help. Depending on the results I find here, I'll either be going back to the store to have them exchanged for the same product.... or get a refund :womanmad:
    Yvonne

    I have the same exact problem, but I can't return mine because I moved 3 hours away from the place I got it What did u end up doing to fix it, and is it something that I can fix? I really do not want to spend time sending them back to the company for the new set, that takes forever, not to mention the shipping cost >_> I had to do the same thing for my Eclipse 2 keyboard cuz of bad keys... please help me

  • Linux USB and Muvo V200 (uchi.o vs. ohci

    Hi
    As a Linux fan I use my MuVo mainly on Linux computers to transfer MP3 files to and from it.
    This all works fine (it appears as a VFAT/FAT6 dri've just fine) and I just use cp to copy
    to or from it. (N.B. Mount it first with mount -t vfat -o rw /dev/sda /mnt/muvo )
    However, my MuVo doesn't work on all my boxes and I am not sure why. My simpleton 256MB FAT6
    usb pen dri've does work on all my Linux boxes though.
    Anyway, in case it helps anyone, here are my experiences on my 4 Linux PCs:
    These 2 PCs work with Muvo :-)
    PC Runs RedHat 9 and uses uhci.o (and USB . only I think)
    PC2 Fedora Core Linux and uchi.o
    These 2 PC's don't work with MuVo :-(
    PC3 Fedora Core and ohci.o
    PC4 Debian Woody (up to date as as 20-Jan-2004)
    So, it seems that the kernel module uhci.o favours the MuVo but the module ohci.o does not.
    (The module used by a kernel is dependent on the mnotherboard chipset, so you have no choice
    over which one to use for a given PC!)
    Anyone any ideas as to what is wrong here?
    Any help here would be much appreciated,
    Thanks in advance.

    Hi will,
    Fortunatly for us, Linux Users, there are people like U!!
    I was thinking in buying one USB Pen Dri've and audio player (MP3 & Radio).
    When studying Creative products I was allmost buying it until I found there was NO support for Linux!!!! then I was afraid!!
    I think I should buy another player!! no?
    Now I now that I can buy Creative, tks to you, and maybe, just maybe, I'll do it.
    I'm a researcher and on my work, I only use Linux. On my home I use both, WinXP (as a work station for me & my wife) and a Linux box (Debian) as Internet gateway, firewall, proxy, and stuff.
    I need to have the Creative working on both!!! Linux and WinXP.
    Do you think it is safe to buy Muvo N200 or TX FM?
    TKS!

  • Creative Audigy 1 Platinum and 2.1 Surround So

    Ok, i have a Audigy Plat. so have the front dri've etc etc.... i also have the Creative i-trigue 3300 which is a 2. surround sound system....at the moment the way it works is that i connect the 2 speakers into the sub woofer and then the sub woofer into my sound card...thouhg this maybe a 2. system, in real terms the sound card doesnt treat it as a 2. system...
    I was just wondering if i can connect like the sub to the digital/analog out of the card and the 2 speakers to the rear and line out of the card?
    Reagrds

    For 2. and 4., those 2 and 4 speaker settings are what the proper settings are called. Your speaker's sub will control what it sends to the satellites.
    Don't worry, they just didn't change the labels. Most cards send the full signal out and most speakers take it from there.
    5. is different as the card sends dedicated signals to all 6 speakers.

  • Creative i trigue 3220 Volume attachment.

    Hi good people, i was using this speaker model(Creative I trigue 3220) for about two years. And then volume controler started to crash when i move the vire. And that started to reapeat more often in result. Now my volume attachment doesn't work at all. And without volume controler my speakers doesn't work too.
    P.S I know that I-Trigue 3220 was launched in the market for quite some time, and production of this product and its accessories have been discontinued. So my question is is it possible to make those speakears work without that volume attachemnt with some program? Or maybe someone know where can i buy that volume controler? So pls suggest solutions. Thank you for attention.

    Hi Xamer!!!
    I am experiencing your same problem and cannot find a solution to replace the volume remote controller.
    I notice that no one has answered to you!
    Did you get a solution then?

  • A message to Creative from the Linux and geek users commun

    Please pardon the possible misspellings/syntax errors in this post, as English is not my nati've language. I am still confident that you will grasp the essence of my message. Thank you.
    I have been following the downfall of Creative in the last few days, and all I can say is : You had it coming. I am another customer who was decei'ved by buying one of your expensi've product. I spent 450$ on your X-Fi Elite pro, only to wait endlessly for stable vista drivers, which are still unstable and crippled. Yes, I know you had problems with how Microsoft changed completely its audio API a few months before launching, but the fact is that this is stuff that can happen, and you had to allocate more budget in order to develop drivers quickly to satisfy your customers. Instead, you just ignored us. And now you're paying for it.
    It's kind of sad that your stock price is falling, but at the same time, it's about time the consumers could unite and get their revenge, and you are actually paying for laughing in our faces for so long. I have been waiting and waiting for a driver for Linux, since you would not provide stable drivers for Vista. Your website dedicated to open source drivers looks like it was coded in 995, with crappy graphics, just to show us that you don't care. And after waiting for over a year for drivers, you gave us a non-working driver, and you won't post any updates at all. ?
    I shell out 450$ for an X-FI Elite Pro, and you laugh into my face, not once (with sub-par drivers for Vista and a long wait), but twice with your non-working Linux drivers ? I'm disgusted.
    I wish your corporate people would understand what just happened, and listen to us, the geeky consumers, who buy, recommend, and install your products for themselves, customers, friends, and family. ? But I know that it does not work that way. Your marketing people, your legal department, your finance departement and all your corporate structure don't CARE about the end-user, but you have made a big mistake by ignoring us all these years. If you want to save your company, you really, really need to open up and develop a totally different relationship with your customer base. But knowing how this works, I'm sure that :?
    . Nobody important in the company structure will take time to read this thread, hoping it will go away, and thinking that the new product lines will make us forget all of this;
    2. You will not take this Public Relations Disaster seriously and think it will simply disapear
    Well let me tell you what's gonna happen : Don't underestimate us, your customers. We will remember what happened in the past few days, but also how you treated us in the past few years. Unless you radically change your practices, and really show good faith, you are certainly going down. I, for one, am considering selling my X-Fi Elite Pro and rely only on onboard sound because at least the drivers work on all available platforms. But if you only knew how I wished to have decent support under Linux or Vista ! But you don't even talk with us, you provide crappy drivers and then forget us !? That's not the way to treat us !? So, unless you provide more than your little PR stunt of april st, where you don't even apologize and recognize your lack of support, I will never buy any of your products again, and I will tell everybody I know to stay away from your products.
    Be aware : This is not a feeling that will go away in a few weeks/few months. I have been using Creative Cards since 996, and have always been a loyal customer, but I implore you to change, and to do it fast. I really hope you do.
    Thank you for your time. ?

    Thank you Igor, your article is very interesting indeed, and thanks for the other responses as well, it is really appreciated.
    I recently tried OSS on Linux, which offers partial support for the X-FI, but with no success. I fear that without any proper documentation provided to ALSA, the complexity of the X-Fi hardware won't allow the development of acceptable drivers for Linux anytime soon. As for Creative development for Linux, well, just go and check out their support page : http://opensource.creative.com/soundcard.html.
    It is beyond my comprehension as to why Creative simply refuses to document its hardware. I mean, I know about IP considerations and such, but the reality is that Creative has a very large part of the market for high-end audio products, and they do not have yet any serious competitors for the gaming/music enthusiast market who don't want to rely on onboard audio. (I know about M-Audio and a few others, but they mainly appeal to profesionals). So, to document their hardware for the open source community has more benefits than risks, since they don't have to pay for driver development, and since they almost sued daniel_K, I'm not afraid that their legal department would track anyone who would try to breach any IP rights by developing some hardware with the documentation they would release. So WHY ? WHY Creative, won't you release proper documentation? Why won't you help us help you ? Is it just by ideology ? That opening your code is bad ? Well, you're wrong. ?
    But it may not be too late, should you *AT LEAST* provide us communication about what's going on at Creative regarding open source. Is it that hard for a Multinational Firm to hire a few developers to develop a driver for Linux ? Why won't you put up a blog for your developer, who can talk about what they're doing, what are the limitations, the hurdles, but at least show a little transparency and stop pretending you really care. ?

  • I have a private Adobe ID and I have a Lightroom Testversion running there! Now my university gave me access to Creative Cloud for Teams and I want to use my Lightroom catalogues with this ID! How can I do this?

    I have a private Adobe ID and I have a Lightroom Testversion running there! Now my university gave me access to Creative Cloud for Teams and I want to use my Lightroom catalogues with this ID! How can I do this?

    Hi,
    thank you, it’s done! The Chat helped me! Now I cannot go into this forum anymore with my old password, but that’s not a big problem.
    Best wishes,
    Christian
    Von: JimHess <[email protected]<mailto:[email protected]>>
    Antworten an: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Datum: Montag, 20. April 2015 18:38
    An: Christian Kogler <[email protected]<mailto:[email protected]>>
    Betreff:  I have a private Adobe ID and I have a Lightroom Testversion running there! Now my university gave me access to Creative Cloud for Teams and I want to use my Lightroom catalogues with this ID! How can I do this?
    I have a private Adobe ID and I have a Lightroom Testversion running there! Now my university gave me access to Creative Cloud for Teams and I want to use my Lightroom catalogues with this ID! How can I do this?
    created by JimHess<https://forums.adobe.com/people/JimHess> in Photoshop Lightroom - View the full discussion<https://forums.adobe.com/message/7454915#7454915>

  • I am very annoyed at the Creative Cloud set up and the non-stop issues and problems

    I am very annoyed at the Creative Cloud set up and the non-stop issues and problems!  I am paying monthly for this service and it is constantly failing in some way!  So far in three months I have had to uninstall and re-install Photoshop THREE times because it stopped working properly and Illustrator I have had to do that same to TWICE!  That isn't including the other apps that have had issues!  I don't have the time to constantly be un-installing and re-installing all or some of the Creative Cloud because your developers are not making a product that works consistently for the money you are charging!  It is costing me more than just this monthly fee!  And I am even less impressed with the fact that I cannot email someone for assistance in resolving these issues.  Really Adobe?

    Adobe contact information - http://helpx.adobe.com/contact.html may help

  • I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help

    I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help

    The license did not have use restrictions Licenses and terms of use | Adobe
    BUT... when your one year Education account ends, I do not think you will be able to renew at the Education rate

  • I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

    I have recently updated the new apps via creative cloud now photoshop and bridge no longer work, they open then say they have encountered a problem and close, I also tried opening the old version of photo shop but getting the same result

    What OS version? What's the exact error? Exactly when does the error occur? What previous versions? What is on the screen when the error displays? Does Photoshop get fully open?
    Try opening Photoshop holding down Shift key immediately to turn off plug-ins. Lots of good suggestions here: Photoshop: Basic Troubleshooting steps to fix most issues

  • I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days?

    I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days? I tried asking in a chat window instead of the forum but no one answered and after about ten minutes my screen restarted and closed the chat window down. It seems a little frustrating not knowing what happened to my order and not being able to contact anyone. Is all this usual with Adobe or are they just having technical problems this week?

    Does your Cloud subscription show on your account page?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Maybe you are looking for

  • Error while integrating with Kerberos and AD

    Hi, Implementing Kerberos as the Desktop Single Signon Solution Environment : Peoplesoft OS : Redhat Linux webserver: Weblogic 10.3.4 appserver : tuxedo 10gr3 While doing this implementation I was able to complete it successfully with the JDK linux h

  • While doing migo-goods receipt for production

    I am getting above message while doing migo please help Batch 0000000027 has the status <restricted-use> Message no. M7670 Diagnosis You are attempting to post a batch with status <restricted use> for a goods receipt. System Response Depending on the

  • Safari 2.0.4 - Uses a lot of memory  ??

    Hello, I own an Intel iMac MA200. I noticed after Safari's 2.0.4 update that it uses a lot of memory, sometimes even as much as 200MB The cure I found is to restart Safari. Sometimes, I need to even Force Quit it. When I finish using my iMac, and clo

  • Help with dynamic table

    Hello, I need to create a 3 column table from three database tables. when any column is missing from the database, I need to display "missing" I cannot just bind the tables as all rows need to be processed. How can I do this in creator? Thanks Frank

  • XMII versus XI/PI

    Hi Folks, I have requirement from client where they want to directly interact with MES using XI : I have few questions regarding this : 1. Is xMII a prerequisite to interface with MES ? 2.  How XI/PI can exchange data with MES using a prebuilt adapte