Error while integrating with Kerberos and AD

Hi,
Implementing Kerberos as the Desktop Single Signon Solution
Environment : Peoplesoft
OS : Redhat Linux
webserver: Weblogic 10.3.4
appserver : tuxedo 10gr3
While doing this implementation I was able to complete it successfully with the JDK linux has provided(1.6.0_22). However the weblogic comes preconfigured with jrockit jdk version1.6.0_24-R28.1.3-4.0.1. When I start the weblogic with jrockit jdk as java_home I am getting the following error.
<Error> <HTTP> <BEA-101165> <Could not load user defined filter in web.xml: com.peoplesoft.pt.desktopsso.kerberos.KerberosSSOFilter.
java.lang.IllegalArgumentException: No Configuration was registered that can handle the configuration named krbServer
at com.bea.common.security.jdkutils.JAASConfiguration.getAppConfigurationEntry(JAASConfiguration.java:130)
at javax.security.auth.login.LoginContext.init(LoginContext.java:243)
at javax.security.auth.login.LoginContext.<init>(LoginContext.java:334)
at com.peoplesoft.pt.desktopsso.kerberos.KerberosSSOFilter.init(KerberosSSOFilter.java:142)
at weblogic.servlet.internal.FilterManager$FilterInitAction.run(FilterManager.java:332)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:98)
at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:59)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
these are my runtime parameters
java -jrockit -XnoOpt -XXnoJITInline -Xms512m -Xmx512m -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Djava.security.krb5.conf=/etc/krb5.conf -Djava.security.auth.login.config=krbLogin.conf -Dsun.security.krb5.debug=true -Djavax.security.auth.useSubjectCredsOnly=false -Dweblogic.Chunksize=65536 -Djava.util.logging.config.file=/u01/app/psoft89/webserv/PREFRESH/piaconfig/properties/logging.properties -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Dweblogic.Name=PIA -Dps_vault=/u01/app/psoft89/webserv/PREFRESH/piaconfig/properties/psvault -Djavax.net.ssl.trustStore=/u01/app/psoft89/webserv/PREFRESH/piaconfig/keystore/pskey -Dweblogic.ProductionModeEnabled=true -Djava.security.policy=/u01/app/psoft89/weblogic/wlserver_10.3/server/lib/weblogic.policy -Dssl.debug=false -Dps_home=/u01/app/psoft89 weblogic.Server
The files krb5.conf and krbLogin.conf exists and have full access.
With the error above it seems that it is not able to pick the configuration file. But just by changing the JAVA_HOME to /usr/java/jdk1.6_022 it starts working.
I have raised this concern with Oracle almost a month before, but still haven't got any reply from them.
Please help.
Thanks and Regards
Anirudha Singh

Hi Faisal,
Thanks for your reply.
Yes I have given the complete path too.
This is the full command line of the weblogic server. I had modifed it to test if it is trying to pick it up from any default location.
java -jrockit -XnoOpt -XXnoJITInline -Xms512m -Xmx512m -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Djava.security.krb5.conf=/etc/krb5.conf -Djava.security.auth.login.config=/etc/krbLogin.conf -Dsun.security.krb5.debug=true -Djavax.security.auth.useSubjectCredsOnly=false -Dweblogic.security.enableNegotiate=true -Dweblogic.Chunksize=65536 -Djava.util.logging.config.file=/u01/app/psoft89/webserv/PREFRESH/piaconfig/properties/logging.properties -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Dweblogic.Name=PIA -Dps_vault=/u01/app/psoft89/webserv/PREFRESH/piaconfig/properties/psvault -Djavax.net.ssl.trustStore=/u01/app/psoft89/webserv/PREFRESH/piaconfig/keystore/pskey -Dweblogic.ProductionModeEnabled=true -Djava.security.policy=/u01/app/psoft89/weblogic/wlserver_10.3/server/lib/weblogic.policy -Dssl.debug=false -Dps_home=/u01/app/psoft89 weblogic.Server
The file is located in /etc folder and has 777 permissions.
Thanks and Regards
Anirudha Singh

Similar Messages

Get error while Integrating with Oracle's Enterprise User Security

Hi,
I am trying to create an Oracle Enterprise User integrating with OVD and MS Active Directory.
I am following all the steps in Integrating with Oracle's Enterprise User Security.
In the documentation section: "Configuring Oracle Virtual Directory for the Integration"
I have applied the steps successfully until:
Update and load the entries into the Local Store Adapters by performing the following steps:
I have successfully extended the Oracle Virtual Directory schema with the loadOVD.ldif
However I am getting errors in the next step: Update realmRoot.ldif to use your namespaces
The next step states the following:
Update realmRoot.ldif to use your namespaces, including the dn, dc, o, orclsubscriberfullname,
and memberurl attributes in the file. If you have a DN mapping between Active Directory and
Oracle Virtual Directory, use the DN that you see from Oracle Virtual Directory.
The realmRoot.ldif file is located in ORACLE_VIRTUAL_DIRECTORY_HOME/eus,
where ORACLE_VIRTUAL_DIRECTORY_HOME represents the location where Oracle Virtual Directory is installed.
The realmRoot.ldif file contains core entries in the directory namespace that Enterprise User Security queries. The realmRoot.ldif file also contains the dynamic group that contains the registered Enterprise User Security databases to allow secured access to sensitive Enterprise User Security related attributes, like the user's Enterprise User Security hashed password attribute.
Load your domain root information in the realmRoot.ldif file into Oracle Virtual Directory using the following command:
ldapmodify -h Oracle_Virtual_Directory_Host –p OVD_Port -D cn=admin -w Admin_Password -v -a –f realmRoot.ldif
When I run the ldapmodify command I get the following error:
add dc:
testldap
add objectclass:
top
domain
domainDNS
adding new entry DC=testldap,DC=local
ldap_add: Operations error
ldap_add: additional info: LDAP Error 1 : null
The actual realmRoot.ldif looks like this:
# Please uncomment the following one line if you are importing this
# LDIF file via OVD Manager or OVD Server's ldapmodify tool.
#version: 1
#dn: dc=com
#dc: com
#objectclass: domain
dn: DC=testldap,DC=local
changetype: add
dc: testldap
#o: subarashii
objectclass: top
objectclass: domain
objectclass: domainDNS
#objectclass: orclSubscriber
#orclsubscriberfullname: subarashii
#orclVersion: 90400
# If your domain structure has more layers than dc=subarashii,dc=com,
# for example, it's dc=us,dc=subarashii,dc=com, you will need to load
# the following ldif entry/entries too.
# Uncomment out the following, if required.
#dn: dc=us,dc=subarashii,dc=com
#orclversion: 90400
#orclsubscriberfullname: us
#objectclass: domain
#objectclass: top
#objectclass: orclSubscriber
#dc: us
# Adding EUSDBGroup entry
# Modify the memberurl attribute and replace it with your own domain name
#dn: cn=EUSDBGROUP,dc=subarashii,dc=com
#cn: EUSDBGROUP
#memberurl:ldap:///dc=subarashii,dc=com??sub?(&(objectclass=orclService)(objectclass=orclDBServer))
#objectclass:groupofuniquenames
#objectclass:groupofurls
#objectclass:top

Did you ever get your questions answered about the realmRoot.ldif file? Did you manage to configure a successful integration of OVD with EUS? I am battling with trying to get Oracle Virtual Directory integrated with Enterprise User Security, but every step I take in Chapter 7 of the OVD manual fails in some way, and the instructions are often vague. I am not sure how to modify the realmRoot.ldif file. Is there any improved documentation on this? I have logged a Service Request, but not getting any help. Any resources or documentation you know of that provides better guidance would be much appreciated. I am way behind my schedule now and this is a very frustrating exercise.
Thanks.

Error while integration with ILOG JRule

Hi,
While integrating with ILOG JRules, every time I am getting the "Introspection error:" error.
Please let me know any one have the solution on the same.
***** Could any one share me any document on integration OBPM with ILOG Rules engine.*
Kind Regards,
Ratna Prasad.

Hi,
Just a guess here. Been a couple years since I've done anything with iLog.
Have they given you an iLog web service to hit? Is this where you're running into your introspection error?
They should have given you a Java Jar file that might have included the ruleset you need to hit. Did you include this as an External Resource first?
Hope this helps,
Dan

Error while working with JBoss and Mysql

Hi
i am doing one application in struts to retrive table information ,insert ,delete ,edit .
while deploying in JBoss first time it is working fine
but with out modifing any thing it is working
i want to do any modifications in jsp,actionclass, formbean class
after that once again i want to deploy.
but while deploying 2 nd time JBoss is showing continuous messages it is not stoping while i press ctrl+c then i want to close .but using this also not closing
forcefully by pressing[b] alt+f4 after that i want to restart every time
but normal application it will working fine
<datasources>
<datasource>
<set-property property="maxcount" value="10">
<set-property property="mincount" value="5">
inside struts-config.xml
in action class i close all stament objects,ResultSet Objects
please give me the answer

Hi
i am doing one application in struts to retrive table information ,insert ,delete ,edit .
while deploying in JBoss first time it is working fine
but with out modifing any thing it is working
i want to do any modifications in jsp,actionclass, formbean class
after that once again i want to deploy.
but while deploying 2 nd time JBoss is showing continuous messages it is not stoping while i press ctrl+c then i want to close .but using this also not closing
forcefully by pressing[b] alt+f4 after that i want to restart every time
but normal application it will working fine
<datasources>
<datasource>
<set-property property="maxcount" value="10">
<set-property property="mincount" value="5">
inside struts-config.xml
in action class i close all stament objects,ResultSet Objects
please give me the answer

Getting Error while integrating Crystal reports with Java

Hi All,
I am getting below error while integrating crystal report with java
[java] os.arch = x86
[java] java.lang.NoSuchMethodError: com.crystaldecisions.Utilities.d.<init>
(Ljava/awt/Image;I)V
[java] at com.crystaldecisions.Utilities.af.try(Unknown Source)
[java] at com.crystaldecisions.Utilities.af.a(Unknown Source)
[java] at com.crystaldecisions.Utilities.af.<init>(Unknown Source)
[java] at com.businessobjects.crystalreports.viewer.applet.g.a(Unknown
Source)
[java] at com.crystaldecisions.ReportViewer.ReportViewer.start(Unknown
Source)
[java] at ReportViewerFrame.<init>(ReportViewerFrame.java:51)
[java] at JRCViewReport.launchApplication(JRCViewReport.java:29)
[java] at JRCViewReport$1.run(JRCViewReport.java:50)
[java] at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:
178)
[java] at java.awt.EventQueue.dispatchEvent(EventQueue.java:443)
[java] at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDi
spatchThread.java:190)
[java] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDisp
atchThread.java:144)
[java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
ava:138)
[java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
ava:130)
[java] at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
Any help can be appreciated
Kalyan

Hi All,
For got to mention i am using crystal reports XI release 2 with JDK1.4.
Kalyan

Error while interacting with scanner acrobat 9.0 and windows 7 and user profile

After using Acrobat 9 for years I get a "Error while interacting with scanner". I have uninstalled and reinstalles the drivers for my Epson Expression 1600 scanner and still get the message. I did get it to work by changing to a differ window user account. Is there anyway correct the problem for the orginal user account.
Thank you

Using MSPaint works fine also,......................
As for the question as to whether the update broke I can't honestly remember, I know it worked finr with an old HP scanner I had but as to the version of Acrobat at that time I don;'t recall
Anyway getting fed up with this issue, I de-installed it, rebooted and re-installed.
Ver 9.0.0 says the scanner driver is not installed or connected
Ver 9.2.0 says the same.
Ver 9.3.4 says error while interacting while interacting with scanner.........
The scanner works with MSPaint, its own driver and application.
What is wrong with this Adobe Acrobat Pro 9?

Conversion Error: I/O error while communicating with native process

Hi,
I am trying to use Oracle Outside In Technology Image Export for conversion of images. I am trying to run the example ExportTest that comes with the downloaded SDK.
I get the below error while running the ExportTest example.
Conversion Error: I/O error while communicating with native process .
Am I missing any settings?
Please guide to the right forum if this is not the one for posting queries on Oracle Outside In Technology Image Export.
Thank you.

Hi Revanth,
I am using Image Export 8.3.7 and I am trying to run the java class "ExportTest" that is in the location sdk\samplecode\ExJava\Examples\ExportTest\src of the download.
My input folder has one jpg - puzzle.jpg (this is just a simple jpg), I am trying to convert it to TIFF. ExportTest.java uses the classes in Export.jar . Export.jar is located in the sdk\samplecode\ExJava\Examples\ExportTest . You can see source files of the Export.jar at location sdk\samplecode\ExJava\Java API\src of the download. I am running the 'ExportTest' by providing the arguments (input folder, output folder and ix.cfg - this file comes with the download). So now when I run this class I was getting the error I mentioned in this post. Inorder to find more details about the error I modified the 'Export.java' (at sdk\samplecode\ExJava\Java API\src\com\outsideinsdk) just to printStackTrace when the exception occurs and rebuilt the 'Export.jar' and ran the 'ExportTest.java'.
And below is the stack trace that I got :
java.io.IOException: CreateProcess: nullexporter.exe "inputpath_u=AGkAbgBwAHUAdA
BcAHAAdQB6AHoAbABlAC4ASgBQAEc=" "outputpath_u=AG8AdQBwAHUAdABcAHAAdQB6AHoAbABlAC
4ASgBQAEcALgBUAEkARgBG" "outputid=FI_TIFF" "fallbackformat=FI_TEXT" "tiffcolorsp
ace=24BitRGB" "preferoitrendering=false" "tiffcompression=Packbits" "mapbuffersi
ze=8192" "defaultprintfontheight=20" "graphicwidthlimit=0" "reordermethod=off" "
unmappablechar=0x002A" "timezone=0" "graphicheightlimit=0" "defaultmarginleft=14
40" "ssshowheadings=false" "quickthumbnail=false" "graphicoutputdpi=0" "ssdirect
ion=AcrossandDown" "defaultmarginbottom=1440" "ssshowgridlines=false" "dbshowhea
dings=false" "readbuffersize=2" "whattoexport=all" "graphicsizelimit=0" "imagewa
termarkopacity=0" "blue=-1" "handlenewfileinfo=no" "outputid=FI_TIFF" "lzwcompre
ssion=enabled" "usedocpagesettings=true" "defaultmarginright=1440" "numberofstat
callbacks=0" "dbfittopage=NoScaling" "tempbuffersize=2048" "pdffilterreorderbidi
=no" "imagecropping=nocropping" "defaultmargintop=1440" "documentmemorymode=larg
e" "m?
at java.lang.Win32Process.create(Native Method)
at java.lang.Win32Process.<init>(Win32Process.java:66)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Runtime.java:566)
at java.lang.Runtime.exec(Runtime.java:491)
at java.lang.Runtime.exec(Runtime.java:457)
at com.outsideinsdk.Export.convert(Export.java:262)
at com.outsideinsdk.ExportTest.convert(ExportTest.java:142)
at com.outsideinsdk.ExportTest.main(ExportTest.java:214)
hope this helps to find the problem.
Thank you

Unknown Error while communicating with O365 BEC Web Service

Hi Guys,
When I try to add a new mail user in O365 Exchange, one strange error is thrown.
Are any guys kind enough to help me ?
Here is the script and the error.
PS C:\Users\o365-user> $cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList
'[email protected]', $(ConvertTo-SecureString -String '*******' -AsPlainText -Force)
PS C:\Users\o365-user> $session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri 'https:
//ps.outlook.com/powershell/' -Credential $cred -Authentication Basic -AllowRedirection
WARNING: Your connection has been redirected to the following URI:
"https://pod51053psh.outlook.com/powershell-liveid?PSVersion=4.0 "
PS C:\Users\o365-user> Import-PSSession $session
WARNING: The names of some imported commands from the module 'tmp_zkc5sid4.gpq' include unapproved verbs that might
make them less discoverable. To find the commands with unapproved verbs, run the Import-Module command again with the
Verbose parameter. For a list of approved verbs, type Get-Verb.
ModuleType Version Name ExportedCommands
Script 1.0 tmp_zkc5sid4.gpq {Add-AvailabilityAddressSpace, Add-DistributionGroupMember...
PS C:\Users\o365-user> $users=Get-MailUser
PS C:\Users\o365-user> New-MailUser -Name '[email protected]' -DisplayName 'Test LIU'
-MicrosoftOnlineServicesID '[email protected]' -Password $(ConvertTo-SecureString -String '*****' -AsPlainText -Force)
Unknown Error while communicating with O365 BEC Web Service (Exception type
"Microsoft.Exchange.Management.BecWebService.CouldNotCreateBecSyncServiceException", message=
"Microsoft.Exchange.Management.BecWebService.CouldNotCreateBecSyncServiceException: Couldn't create BEC Web Service:
The matching certificate for certificateSubject CN=ExoProvToO365.outlook.com, OU=Microsoft Corporation, O=Microsoft
Corporation, L=Redmond, S=WA, C=US couldn't be found.
Parameter name: certificateSubject ---> System.ArgumentException: The matching certificate for certificateSubject
CN=ExoProvToO365.outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US couldn't be
found.
Parameter name: certificateSubject
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.FindFirstCertWithSubjectDistinguishe
dName(String certificateSubject, Boolean checkForValid)
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.CreateService(Uri url)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.InvokeWithRetry[TResponse](Action operation)
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.GetUserByUpn(GetUserByUpnRequest request)
at Microsoft.Exchange.ProvisioningAgent.BecWebServiceLiveIdManager.GetMemberType(SmtpAddress memberName)", inner
message "System.ArgumentException: The matching certificate for certificateSubject CN=ExoProvToO365.outlook.com,
OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US couldn't be found.
Parameter name: certificateSubject
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.FindFirstCertWithSubjectDistinguishe
dName(String certificateSubject, Boolean checkForValid)
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.CreateService(Uri url)")
+ CategoryInfo : NotSpecified: (0:Int32) [New-MailUser], RecipientTaskException
+ FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=d97a193e-91a7-4430-ac64-6b7003f5b9b0,TimeStamp=4/23/2015
9:37:58 AM] [FailureCategory=Cmdlet-RecipientTaskException] 3F9FDA25,Microsoft.Exchange.Management.RecipientTasks
.NewMailUser
+ PSComputerName : pod51053psh.outlook.com
PS C:\Users\o365-user> New-ManagementRoleAssignment -Role 'ApplicationImpersonation' -User 'test1_1@smokeazu
rebeta5.onmicrosoft.com'
Couldn't find a user with the identity "[email protected]".
+ CategoryInfo : NotSpecified: (:) [New-ManagementRoleAssignment], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=88777637-298d-4bb1-972f-b61161566a57,TimeStamp=4/23/2015
9:37:59 AM] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 921A76AD,Microsoft.Exchange.Management.Rba
cTasks.NewManagementRoleAssignment
+ PSComputerName : pod51053psh.outlook.com
PS C:\Users\o365-user> New-ManagementRoleAssignment -Role 'Mailbox Search' -User '[email protected]
microsoft.com'
Couldn't find a user with the identity "[email protected]".
+ CategoryInfo : NotSpecified: (:) [New-ManagementRoleAssignment], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=2b64d3a2-97da-4de5-be8c-00ad73452456,TimeStamp=4/23/2015
9:38:00 AM] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 921A76AD,Microsoft.Exchange.Management.Rba
cTasks.NewManagementRoleAssignment
+ PSComputerName : pod51053psh.outlook.com
PS C:\Users\o365-user> Remove-PSSession $session
PS C:\Users\o365-user>
Thanks
Budlion LIU

Hello,
Or you can also ask on Exchange Online Forum:
https://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Error while communicating with the server

Hi Experts,
I'm having the following issue, when I try to send data using an input schedule the server says that there was an error while communicating with the server and don't send the data, I took a look at the log file and it says the following,
==============[BPC Logging]==============
[Message Type] : ERROR
[Job Name]     : OSoft.Services.Application.FileAccessService.FileAccessServiceProxy
[DateTime]     : 4/6/2011 8:42:44 AM
[UserId]       : CAMESAP\BPC_SYSADMIN
[Message]       : UJF_EXCEPTION E018     Cannot find document/directory 0
==============[BPC Logging End ]==============
Also i went to take a look at the default script logic, because i remember that this error happened to me when i wrongly program an script logic in the default.lgf but it shows me the following error when I open it,
System.InvalidCastExeption: Specified cast is not valid
at System.data.DataColumnCollection.get_Item(String name)
at System.data.DataRow.get_Item(String columnName)
at Osoft.Consumers.Admin.AdminLogicClient50.LogicMain.GetLogic()
If I compile the file, the error stop appearing, put with all new logic files it happens at first, I think that these two errors are very deep related, if anyone can help me will be very appreciated,
Thanks in advanced

Hi,
I have faced the similar kind of problem in BPC NW 7.5 SP5.
The main reason is when you are trying to send any data via input schedule, you will get this web server communication issue.
1) Check if any thing you are calling script logic under default.LGF. Exclude the logic out from default and test it.
2) Process all the dimensions in application
3) Perform Lite optimization and check are there any errors.
4) Finally check BPC COM+ services and check if any service stopped and also check osoft send governer service in microsoft services.
5) Diagnoise usign server manager.
6) Try input some thing in apshell and check if u face the same web server communication error?

Quality Center 11 (ALM) Query - Integration with Subversion and Jenkins

Hi OHPCPaT Forum,
Are there any restrictions to enabling the QC integration with Subversion and Jenkins when the QC server is a SaaS cloud instance? Is there any additional config I should be aware of?
Thanks in anticipation

Hi,
Yes all the users are facing the issue. Please find more details for the issue.
Currently we are upgrading Quality Center 10.0 to 11.0 with HP Enterprise Integration module for SAP applications. The project successfully upgraded from QC 10.0 to 11.0 but there are some error popup for the project for which Application Module and Enterprise Integration for SAP applications Version 2.6 was enabled
Quality Center Details:
HP Application Lifecycle Management 11.00
ALM patch level: 07
Quality Center 11.00 Enterprise Edition
Component     Build
OTA Client     11.0.0.6051
User Interface     11.0.0.6051
WebGate Client     11.0.0.6051
Test Run Scheduler     11.0.0.6051
Execution Flow     11.0.0.6051
Site Administration Client     11.0.0.6051
Extension Version
Enterprise Integration for SAP applications     2.6.0.3232
Sprinter     11.0.0.6051
Application Model     2.6.0.917
Installation Steps followed:-
1.Installed HP ALM
2.Installed Patch Service Pack 2 (Patch 2,3,4)
3.Installed Patch 6
4.Installed Patch 7
5.Installed the Extensions HP Enterprise Integration module for SAP applications using Extension Deployment Tool by following the steps provided in the Addin Page
6.Created new project in HP ALM
7.Login to the project (no issue)
8.Enabled the Project Extensions
9.Login to the project (able to access the project but error message is popup when we access Test plan and Defect module)
Note: There is no error when we access the project for which the HP Enterprise Integration module for SAP applications EI not enabled. QC 11.0 is not integrated with any tools.
Let me know is there any step we missed or we need to do any manual steps we need to do before enabling EI

Pre-requisits in IP/IVR while integration with Nuance ASR/TTS

Hi,
Please let me know the pre-requisits in IP/IVR [IPCC Enterprise], while integrating with Nuance ASR/TTS. For Example which OS I need to install, which SQL Database needs to be installed, also, please let me know the installation process.
Do I need to make the IP/IVR server of a part of Domain, also, which TCP Port needs it will used.
Regards,
Navinder

I am running Nuance version 8.5. I am quite sure its running as when i do a http://10.10.1.70:7080, all the processes are running fine and in the ready state.

Error While uploading the Function and Function_BP

Hello,
I am getting the following error while uploading the Functions and Funtions_BP using the Rule Upload functions.
com.virsa.cc.comp.Function_upload.onActionUploadFunc(Function_upload.java:302) com.virsa.cc.comp.wdp.InternalFunction_upload.wdInvokeEventHandler(InternalFunction_upload.java:150) com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) javax.servlet.http.HttpServlet.service(HttpServlet.java:760) javax.servlet.http.HttpServlet.service(HttpServlet.java:853) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) java.security.AccessController.doPrivileged(Native Method) com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
The files which i am uploading the file from the Best practises only.
What is the reason for this error?
Did any one get this error?
Regards,
Kumar Rayudu
Edited by: Kumar Rayudu on Aug 4, 2009 12:32 PM

Hello Kumar,
Have you uploaded the SAP text and object files? Upload them first and then try to upload functions.
Harleen
SAP GRC RIG

Error while working with OracleApps Adapter please help mee

<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>1086</code>
</part><part name="summary"><summary>file:/F:/product/10.1.3.1/OracleAS_2/bpel/domains/test/tmp/.bpel_RepairOrder_1.0_4bac0e828ef344d37656722b167615db.tmp/CreateRepairOrder.wsdl [ CreateRepairOrder_ptt::CreateRepairOrder(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'CreateRepairOrder' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.XX_BPEL_CREATEREPAIRORDER.CSD_REPAIRS_PUB$CREATE_REPAIR API. Cause: java.sql.SQLException: ORA-01086: savepoint 'CREATE_REPAIR_ORDER_PUB' never established
ORA-06512: at "APPS.JTF_PLSQL_API", line 65
ORA-06512: at "APPS.CSD_REPAIRS_PUB", line 144
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APPS.XX_BPEL_CREATEREPAIRORDER", line 160
ORA-06512: at line 1
[Caused by: ORA-01086: savepoint 'CREATE_REPAIR_ORDER_PUB' never established
ORA-06512: at "APPS.JTF_PLSQL_API", line 65
ORA-06512: at "APPS.CSD_REPAIRS_PUB", line 144
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APPS.XX_BPEL_CREATEREPAIRORDER", line 160
ORA-06512: at line 1
; nested exception is:
     ORABPEL-11811
Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.XX_BPEL_CREATEREPAIRORDER.CSD_REPAIRS_PUB$CREATE_REPAIR API. Cause: java.sql.SQLException: ORA-01086: savepoint 'CREATE_REPAIR_ORDER_PUB' never established
ORA-06512: at "APPS.JTF_PLSQL_API", line 65
ORA-06512: at "APPS.CSD_REPAIRS_PUB", line 144
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APPS.XX_BPEL_CREATEREPAIRORDER", line 160
ORA-06512: at line 1
[Caused by: ORA-01086: savepoint 'CREATE_REPAIR_ORDER_PUB' never established
ORA-06512: at "APPS.JTF_PLSQL_API", line 65
ORA-06512: at "APPS.CSD_REPAIRS_PUB", line 144
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APPS.XX_BPEL_CREATEREPAIRORDER", line 160
ORA-06512: at line 1
Check to ensure that the API is defined in the database and that the parameters match the signature of the API. Contact oracle support if error is not fixable.
</summary>
</part><part name="detail"><detail>
Internal Exception: java.sql.SQLException: ORA-01086: savepoint 'CREATE_REPAIR_ORDER_PUB' never established
ORA-06512: at "APPS.JTF_PLSQL_API", line 65
ORA-06512: at "APPS.CSD_REPAIRS_PUB", line 144
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APPS.XX_BPEL_CREATEREPAIRORDER", line 160
ORA-06512: at line 1
Error Code: 1086</detail>
</part></bindingFault>

create or replace
PACKAGE BODY CSD_REPAIRS_PUB as
/* $Header: csdpdrab.pls 120.12 2006/09/05 11:57:18 vparvath noship $ */
* This is the public interface for the Depot Repair API. It allows
* execution of various Depot Repair APIs.
* @rep:scope public
* @rep:product CSD
* @rep:displayname Depot Repair APIs
* @rep:lifecycle active
* @rep:category BUSINESS_ENTITY CSD_REPAIR_ORDER
-- Package name : CSD_REPAIRS_PUB
-- Purpose : This package contains the public APIs for creating
-- and updating repair orders.
-- History :
-- Version Date Name Description
-- 115.0 11/17/99 pkdas Created.
-- 115.1 12/18/99 pkdas
-- 115.2 01/04/00 pkdas
-- 115.3 02/09/00 pkdas Added p_REPAIR_LINE_ID as IN parameter in the
-- Create_Repairs procedure.
-- Added p_REPAIR_NUMBER as OUT parameter in the
-- Create_Repairs procedure.
-- 115.4 02/29/00 pkdas Changed the procedure name
-- Create_Repairs -> Create_Repair_Order
-- Update_Repairs -> Update_Repair_Order
-- Added p_validation_level to Create_Repair_Order and
-- Update_Repair_Order
-- NOTE :
G_PKG_NAME CONSTANT VARCHAR2(30) := 'CSD_REPAIRS_PUB';
G_FILE_NAME CONSTANT VARCHAR2(12) := 'csdpdrab.pls';
g_debug NUMBER := csd_gen_utility_pvt.g_debug_level;
* Create Repair Order
* @param P_Api_Version_Number api version number
* @param P_Init_Msg_List initial the message stack, default to false
* @param P_Commit to decide whether to commit the transaction or not, default to false
* @param p_validation_level validation level, default to full level
* @param p_repair_line_id repair line id is unique id
* @param P_REPLN_Rec repiar line record
* @param p_create_default_logistics flag to create logistics lines, default to N
* @param X_REPAIR_LINE_ID repair line id of the created repair order
* @param X_REPAIR_NUMBER repair number of the created repair order which display on Depot UI
* @param X_Return_Status return status
* @param X_Msg_Count return message count
* @param X_Msg_Data return message data
* @rep:scope public
* @rep:lifecycle active
* @rep:displayname Create Repair Order
PROCEDURE Create_Repair_Order(P_Api_Version_Number IN NUMBER,
P_Init_Msg_List IN VARCHAR2 := FND_API.G_FALSE,
P_Commit IN VARCHAR2 := FND_API.G_FALSE,
p_validation_level IN NUMBER := FND_API.G_VALID_LEVEL_FULL,
P_REPAIR_LINE_ID IN NUMBER := FND_API.G_MISS_NUM,
P_REPLN_Rec IN CSD_REPAIRS_PUB.REPLN_Rec_Type,
p_create_default_logistics IN VARCHAR2 := 'N',
X_REPAIR_LINE_ID OUT NOCOPY NUMBER,
X_REPAIR_NUMBER OUT NOCOPY VARCHAR2,
X_Return_Status OUT NOCOPY VARCHAR2,
X_Msg_Count OUT NOCOPY NUMBER,
X_Msg_Data OUT NOCOPY VARCHAR2) IS
l_api_name CONSTANT VARCHAR2(30) := 'Create_Repair_Order';
l_api_version_number CONSTANT NUMBER := 1.0;
BEGIN
-- Standard Start of API savepoint
SAVEPOINT CREATE_REPAIR_ORDER_PUB;
-- Standard call to check for call compatibility.
IF NOT FND_API.Compatible_API_Call(l_api_version_number,
p_api_version_number,
l_api_name,
G_PKG_NAME)
THEN
RAISE FND_API.G_EXC_UNEXPECTED_ERROR;
END IF;
-- Initialize message list if p_init_msg_list is set to TRUE.
IF FND_API.to_Boolean(p_init_msg_list)
THEN
FND_MSG_PUB.initialize;
END IF;
-- Initialize API return status to success
x_return_status := FND_API.G_RET_STS_SUCCESS;
-- API body
CSD_REPAIRS_PVT.Create_Repair_Order(P_Api_Version_Number => 1.0,
P_Init_Msg_List => p_init_msg_list,
P_Commit => p_commit,
P_Validation_Level => p_validation_level,
P_REPAIR_LINE_ID => p_REPAIR_LINE_ID,
P_REPLN_Rec => p_REPLN_Rec,
X_REPAIR_LINE_ID => x_REPAIR_LINE_ID,
X_REPAIR_NUMBER => x_REPAIR_NUMBER,
X_Return_Status => x_return_status,
X_Msg_Count => x_msg_count,
X_Msg_Data => x_msg_data);
-- Check return status from the above procedure call
IF not (x_return_status = FND_API.G_RET_STS_SUCCESS)
then
ROLLBACK TO CREATE_REPAIR_ORDER_PUB;
return;
END IF;
IF (P_CREATE_DEFAULT_LOGISTICS = 'Y') THEN
CSD_LOGISTICS_PVT.Create_Default_Logistics
( p_api_version => P_Api_Version_Number,
p_commit => P_Commit,
p_init_msg_list => P_Init_Msg_List,
p_validation_level => p_validation_level,
p_repair_line_id => P_REPAIR_LINE_ID,
x_return_status => X_Return_Status,
x_msg_count => X_Msg_Count,
x_msg_data => X_Msg_Data
IF NOT(x_return_status = FND_API.G_RET_STS_SUCCESS) THEN
RAISE FND_API.G_EXC_ERROR;
END IF;
END IF;
-- End of API body.
-- Standard check for p_commit
IF FND_API.to_Boolean(p_commit)
THEN
COMMIT WORK;
END IF;
-- Standard call to get message count and if count is 1, get message info.
FND_MSG_PUB.Count_And_Get(p_count => x_msg_count,
p_data => x_msg_data);
EXCEPTION
WHEN FND_API.G_EXC_ERROR THEN
JTF_PLSQL_API.HANDLE_EXCEPTIONS(P_API_NAME => L_API_NAME,-------------------------------line 144 error
P_PKG_NAME => G_PKG_NAME,
P_EXCEPTION_LEVEL => FND_MSG_PUB.G_MSG_LVL_ERROR,
P_PACKAGE_TYPE => JTF_PLSQL_API.G_PUB,
X_MSG_COUNT => X_MSG_COUNT,
X_MSG_DATA => X_MSG_DATA,
X_RETURN_STATUS => X_RETURN_STATUS);
-- RAISE;
WHEN FND_API.G_EXC_UNEXPECTED_ERROR THEN
JTF_PLSQL_API.HANDLE_EXCEPTIONS(P_API_NAME => L_API_NAME,
P_PKG_NAME => G_PKG_NAME,
P_EXCEPTION_LEVEL => FND_MSG_PUB.G_MSG_LVL_UNEXP_ERROR,
P_PACKAGE_TYPE => JTF_PLSQL_API.G_PUB,
X_MSG_COUNT => X_MSG_COUNT,
X_MSG_DATA => X_MSG_DATA,
X_RETURN_STATUS => X_RETURN_STATUS);
-- RAISE;
WHEN OTHERS THEN
JTF_PLSQL_API.HANDLE_EXCEPTIONS(P_API_NAME => L_API_NAME,
P_PKG_NAME => G_PKG_NAME,
P_EXCEPTION_LEVEL => JTF_PLSQL_API.G_EXC_OTHERS,
P_PACKAGE_TYPE => JTF_PLSQL_API.G_PUB,
X_MSG_COUNT => X_MSG_COUNT,
X_MSG_DATA => X_MSG_DATA,
X_RETURN_STATUS => X_RETURN_STATUS);
-- RAISE;
End Create_Repair_Order;
PROCEDURE Update_Repair_Order(P_Api_Version_Number IN NUMBER,
P_Init_Msg_List IN VARCHAR2 := FND_API.G_FALSE,
P_Commit IN VARCHAR2 := FND_API.G_FALSE,
p_validation_level IN NUMBER := FND_API.G_VALID_LEVEL_FULL,
p_REPAIR_LINE_ID IN NUMBER,
P_REPLN_Rec IN OUT NOCOPY CSD_REPAIRS_PUB.REPLN_Rec_Type,
X_Return_Status OUT NOCOPY VARCHAR2,
X_Msg_Count OUT NOCOPY NUMBER,
X_Msg_Data OUT NOCOPY VARCHAR2) IS
l_api_name CONSTANT VARCHAR2(30) := 'Update_Repair_Order';
l_api_version_number CONSTANT NUMBER := 1.0;
BEGIN
-- Standard Start of API savepoint
SAVEPOINT UPDATE_REPAIR_ORDER_PUB;
-- Standard call to check for call compatibility.
IF NOT FND_API.Compatible_API_Call(l_api_version_number,
p_api_version_number,
l_api_name,
G_PKG_NAME)
THEN
RAISE FND_API.G_EXC_UNEXPECTED_ERROR;
END IF;
-- Initialize message list if p_init_msg_list is set to TRUE.
IF FND_API.to_Boolean(p_init_msg_list)
THEN
FND_MSG_PUB.initialize;
END IF;
-- Initialize API return status to SUCCESS
x_return_status := FND_API.G_RET_STS_SUCCESS;
-- API body
CSD_repairs_PVT.Update_Repair_Order(P_Api_Version_Number => 1.0,
P_Init_Msg_List => p_init_msg_list,
P_Commit => p_commit,
P_Validation_Level => p_validation_level,
p_REPAIR_LINE_ID => p_repair_line_id,
P_REPLN_Rec => p_REPLN_Rec,
X_Return_Status => x_return_status,
X_Msg_Count => x_msg_count,
X_Msg_Data => x_msg_data);
-- Check return status from the above procedure call
IF not (x_return_status = FND_API.G_RET_STS_SUCCESS)
then
ROLLBACK TO UPDATE_REPAIR_ORDER_PUB;
return;
END IF;
-- End of API body.
-- Standard check for p_commit
IF FND_API.to_Boolean(p_commit)
THEN
COMMIT WORK;
END IF;
-- Standard call to get message count and if count is 1, get message info.
FND_MSG_PUB.Count_And_Get(p_count => x_msg_count,
p_data => x_msg_data);
EXCEPTION
WHEN FND_API.G_EXC_ERROR THEN
JTF_PLSQL_API.HANDLE_EXCEPTIONS(P_API_NAME => L_API_NAME,
P_PKG_NAME => G_PKG_NAME,
P_EXCEPTION_LEVEL => FND_MSG_PUB.G_MSG_LVL_ERROR,
P_PACKAGE_TYPE => JTF_PLSQL_API.G_PUB,
X_MSG_COUNT => X_MSG_COUNT,
X_MSG_DATA => X_MSG_DATA,
X_RETURN_STATUS => X_RETURN_STATUS);
-- RAISE;
WHEN FND_API.G_EXC_UNEXPECTED_ERROR THEN
JTF_PLSQL_API.HANDLE_EXCEPTIONS(P_API_NAME => L_API_NAME,
P_PKG_NAME => G_PKG_NAME,
P_EXCEPTION_LEVEL => FND_MSG_PUB.G_MSG_LVL_UNEXP_ERROR,
P_PACKAGE_TYPE => JTF_PLSQL_API.G_PUB,
X_MSG_COUNT => X_MSG_COUNT,
X_MSG_DATA => X_MSG_DATA,
X_RETURN_STATUS => X_RETURN_STATUS);
-- RAISE;
WHEN OTHERS THEN
JTF_PLSQL_API.HANDLE_EXCEPTIONS(P_API_NAME => L_API_NAME,
P_PKG_NAME => G_PKG_NAME,
P_EXCEPTION_LEVEL => JTF_PLSQL_API.G_EXC_OTHERS,
P_PACKAGE_TYPE => JTF_PLSQL_API.G_PUB,
X_MSG_COUNT => X_MSG_COUNT,
X_MSG_DATA => X_MSG_DATA,
X_RETURN_STATUS => X_RETURN_STATUS);
-- RAISE;
End Update_Repair_Order;
-- R12 Development Begin
* Update Repair Order Status
* @param P_Api_Version api version number
* @param P_Commit to decide whether to commit the transaction or not, default to false
* @param P_Init_Msg_List initial the message stack, default to false
* @param X_Return_Status return status
* @param X_Msg_Count return message count
* @param X_Msg_Data return message data
* @param P_Repair_status_rec repair status attributes record.
* @param P_status_upd_control_rec repair status record control flags.
* @param X_OBJECT_VERSION_NUMBER
* @rep:scope public
* @rep:lifecycle active
* @rep:displayname Update Repair Order Status
PROCEDURE Update_Ro_Status(P_Api_Version IN NUMBER,
P_Commit IN VARCHAR2,
P_Init_Msg_List IN VARCHAR2,
X_Return_Status OUT NOCOPY VARCHAR2,
X_Msg_Count OUT NOCOPY NUMBER,
X_Msg_Data OUT NOCOPY VARCHAR2,
P_REPAIR_STATUS_Rec IN REPAIR_STATUS_REC_TYPE,
P_STATUS_UPD_CONTROL_REC IN STATUS_UPD_CONTROL_REC_TYPE,
X_OBJECT_VERSION_NUMBER OUT NOCOPY NUMBER) IS
l_api_name CONSTANT VARCHAR2(30) := 'Update_Ro_Status';
l_api_version_number CONSTANT NUMBER := 1.0;
     l_msg_data varchar2(2000);
     l_msg_index_out NUMBER;
BEGIN
-- Standard Start of API savepoint
SAVEPOINT UPDATE_RO_STATUS_PUB;
-- Initialize message list if p_init_msg_list is set to TRUE.
IF FND_API.to_Boolean(p_init_msg_list)
THEN
FND_MSG_PUB.initialize;
END IF;
-- Initialize API return status to success
x_return_status := FND_API.G_RET_STS_SUCCESS;
-- API body
CSD_REPAIRS_PVT.UPDATE_RO_STATUS(P_Api_Version => p_api_version,
P_Commit => p_commit,
P_Init_Msg_List => p_init_msg_list,
P_Validation_Level => FND_API.G_VALID_LEVEL_FULL,
X_Return_Status => x_return_status,
X_Msg_Count => x_msg_count,
X_Msg_Data => x_msg_data,
P_REPAIR_STATUS_REC => p_repair_status_rec,
P_STATUS_CONTROL_REC => p_status_upd_control_rec,
X_OBJECT_VERSION_NUMBER => x_object_Version_number);
-- Check return status from the above procedure call
IF not (x_return_status = FND_API.G_RET_STS_SUCCESS)
then
ROLLBACK TO UPDATE_RO_STATUS_PUB;
return;
END IF;
-- End of API body.
-- Standard check for p_commit
IF FND_API.to_Boolean(p_commit)
THEN
COMMIT WORK;
END IF;
-- Standard call to get message count and if count is 1, get message info.
FND_MSG_PUB.Count_And_Get(p_count => x_msg_count,
p_data => x_msg_data);
     if(x_msg_count > 1) then
          FOR l_index IN 1 .. x_msg_count
          LOOP
          fnd_msg_pub.get (p_msg_index => l_index,
                    p_encoded => fnd_api.g_false,
                    p_data => l_msg_data,
                    p_msg_index_out => l_msg_index_out
          x_msg_data := x_msg_data ||'['||l_msg_data||']';
          END LOOP;
     end if;
EXCEPTION
WHEN Fnd_Api.G_EXC_ERROR THEN
x_return_status := Fnd_Api.G_RET_STS_ERROR;
ROLLBACK TO UPDATE_RO_STATUS_PUB;
Fnd_Msg_Pub.Count_And_Get(p_count => x_msg_count,
p_data => x_msg_data);
IF (Fnd_Log.level_error >= Fnd_Log.g_current_runtime_level)
THEN
Fnd_Log.STRING(Fnd_Log.level_error,
'csd.plsql.CSD_REPAIRS_PUB.Update_ro_status',
'EXC_ERROR[' || x_msg_data || ']');
END IF;
     if(x_msg_count > 1) then
          FOR l_index IN 1 .. x_msg_count
          LOOP
          fnd_msg_pub.get (p_msg_index => l_index,
                    p_encoded => fnd_api.g_false,
                    p_data => l_msg_data,
                    p_msg_index_out => l_msg_index_out
          x_msg_data := x_msg_data ||'['||l_msg_data||']';
          END LOOP;
     end if;
WHEN Fnd_Api.G_EXC_UNEXPECTED_ERROR THEN
x_return_status := Fnd_Api.G_RET_STS_UNEXP_ERROR;
ROLLBACK TO UPDATE_RO_STATUS_PUB;
Fnd_Msg_Pub.Count_And_Get(p_count => x_msg_count,
p_data => x_msg_data);
IF (Fnd_Log.level_exception >= Fnd_Log.g_current_runtime_level)
THEN
Fnd_Log.STRING(Fnd_Log.level_exception,
'csd.plsql.CSD_REPAIRS_PUB.Update_ro_status',
'EXC_UNEXP_ERROR[' || x_msg_data || ']');
END IF;
     if(x_msg_count > 1) then
          FOR l_index IN 1 .. x_msg_count
          LOOP
          fnd_msg_pub.get (p_msg_index => l_index,
                    p_encoded => fnd_api.g_false,
                    p_data => l_msg_data,
                    p_msg_index_out => l_msg_index_out
          x_msg_data := x_msg_data ||'['||l_msg_data||']';
          END LOOP;
     end if;
WHEN OTHERS THEN
x_return_status := Fnd_Api.G_RET_STS_UNEXP_ERROR;
Rollback TO UPDATE_RO_STATUS_PUB;
IF Fnd_Msg_Pub.Check_Msg_Level(Fnd_Msg_Pub.G_MSG_LVL_UNEXP_ERROR)
THEN
Fnd_Msg_Pub.Add_Exc_Msg(G_PKG_NAME, l_api_name);
END IF;
Fnd_Msg_Pub.Count_And_Get(p_count => x_msg_count,
p_data => x_msg_data);
IF (Fnd_Log.level_exception >= Fnd_Log.g_current_runtime_level)
THEN
Fnd_Log.STRING(Fnd_Log.level_exception,
'csd.plsql.CSD_REPAIRS_PUB.Update_ro_status',
'SQL MEssage[' || SQLERRM || ']');
END IF;
     if(x_msg_count > 1) then
          FOR l_index IN 1 .. x_msg_count
          LOOP
          fnd_msg_pub.get (p_msg_index => l_index,
                    p_encoded => fnd_api.g_false,
                    p_data => l_msg_data,
                    p_msg_index_out => l_msg_index_out
          x_msg_data := x_msg_data ||'['||l_msg_data||']';
          END LOOP;
     end if;
End Update_ro_status;
-- R12 Development End
End CSD_REPAIRS_PUB;
Plzz checkout help me out

CRM 5.0 Integration with Twitter and facebook

HI Experts,
i am working with SAP CRM 5.0 version,
My existing client want to set up SAP CRM with twitter and Facebook specially customor services ,
Does SAP CRM 5.0 has tight integration with twitter and facebook ,
if yes will you please share iinformation in terms of
1)Effort Estimation :manpoer
2)Costing details
Thanking you in advance
Pravin shete

@sherrysarath: Could you share some documents to understand how standards works for this issue? And if there aren't standards requirements, could you share your custom solution.
@pravin wipro : Could you explain what are your requirements?

DMS integration with PP and PS.

Hi SAP PLM experts,
I would like to know how mySAP PLM's DMS module is integrated with PS and PP module.
Any small scenario with T codes and configuration help is highly appriciated.
If you guyz have any documents/materials for this question, please mail the same to sudhu03 at gmail dot com.
Thanks in advance,
S.Achar.

It is only through the object linkwhich you provide.
In the business perpective, we attach the contract documents, design drawings and other doucuments to the project for ready referance.
You can create the DIR directly from PS transaction or you can create it in DMS and attach it to the Project.
We do have the red lining to identify teh changes reqd in the document.

Error while integrating with Kerberos and AD

Similar Messages

Maybe you are looking for