Creative LAb pci video card model ct7260.

Hi ,
I am trying to find xp/win2000 drivers for? C.
If some one may have these dri'ves can you please share it with me.
I did try to find it but I failed.
Can anyone help
Thanks

That not a Video card that a Hardware?DVD Decoder know as Creative Encore DXR3 which = Sigma's REALmagic Hollywood Plus

Similar Messages

M58p 7479 PCI Video Card

I have been searching on this subject for a while now and a lot has been discussed about PCI-E video cards for M58p models but I haven't really found many topics on PCI video cards for M58p models.
I'm looking for a way to stream videos from my M58p to my TV. One way to do it is to use a DisplayPort > HDMI convertor for the video and using an external sound card (for digital sound) to stream the audio. However, what I am afraid for is that the two won't be synchronized so therefore I looked for other options such as adding a video card. However, I never thought it would be so difficult to find a video card that is compatible to this model.
My question is whether someone can help me with advising on what to do? Any idea which video cards would be good and suitable for my situation?

Have you read this thread: http://forums.lenovo.com/t5/A-M-and-Edge-Series-ThinkCentre/ThinkCentre-M58p-Graphics-Card-Whitelist...

PCI video card replacement for PowerMac G3 (Blue and White)

Hi, I am new to this forum. I apologize if this issue has been addressed before, but I have been reading over the forum for the last 2 days and tried all the steps I could find. I have an old PowerMac G3 (Blue and White).
It used to run fine. I had a friend with a similar computer and he
needed a video card, so I gave him the one in my Mac G3, because I was not using it at the time.
Now, I have decided I want to use it. I am running into an issue with the video (It takes PCI), I get no display, but I can hear the hard drive spin, it lights up, I hear the Apple "ding".
I have about 6 PCI video cards laying around, and I have tried all of them, resetting the CUDA each time. Still cannot get a display.
I have tried different slots on the motherboard, checked the PRAM battery, (it was good). Tried booting off a live Linux CD for power PCs, tried the commandoption+pr until I hear the apple "ding" go off 2x, I have tried a different monitor and monitor cable.
Nothing seems to work, I need to know what I should try next.
Thank you for your help in this matter.

"I have about 6 PCI video cards laying around, and I have tried all of them, resetting the CUDA each time. Still cannot get a display."
If these graphics cards are designed for use in PCs, they won't work in your Mac. Compatible graphics cards must be programmed with a Mac ROM. Some "PC" cards can have their EEPROM chip flashed with a Mac ROM, provided that someone has extracted the particular Mac ROM code for the card in question. A web search will provide leads for that. If you just want a decent graphics card, go for a Radeon 7000 Mac Edition (2002 vintage card). If you check eBay, you should be able to find a flashed "PC" Radeon 7000 card. I'd try to get the one with 64 MBs of DDR memory, as opposed to the 32 MB model. If you don't mind spending more $$, you can find a more current PCI graphics card for your G3, like the Radeon 9200 at Other World Computing.

Windows 7 - Pci-to-Pci Bridge (Error: Code 10) - PCI Video Card

Before I state my issues I will list what I'm running and what I'm trying to accomplish.
I'm running Windows 7 Enterprise 64-bit edition, not the Beta or RC. I have 3 video cards in my possession (listed below).
- (PCIe) Evga GTX260
- (PCI) Evga 9400GT
- (PCI) Evga Fx5500
Out of those 3 cards I only use the GTX260 and the 9400GT. I had to 'retire' the Fx5500 because the latest WHQL (certified) drivers only provide support as far down as the "6 series" Nvidia cards. Unfortunately the Fx5500 is a "5 series" and falls below that line. I have already tried to use the GTX260 and Fx5500 in previous versions of Windows (XP and Vista), but there is no way to download and install two separate drivers for two of the same make of video card - you'll get nothing but errors. There is the option of going to a place like guru3d.com and downloading a custom supported driver that covers both the GTX260 and Fx5500, but the drivers are not certified and lack support. Therefore, I purchased and now use the 9400GT which is covered under the drivers for the GTX260 and eliminates the need for messing around with custom drivers. Also, the 9400GT has a better graphics processor and more memory than the Fx5500, so it was time to upgrade anyway.
Now that you have some background info here is my issue Whenever I install the 9400GT I get a second 'pci-to-pci bridge' entry (the other entry has no errors) that shows up under 'System Devices' in the Device Manager. The second pci-to-pci bridge entry has a yellow triangle with an exclamation mark on it that refers to a problem. When you check the properties of this device it more or less says that Windows has detected a problem (Error Code 10). The GTX260 still works and even shows up under the 'Display Adapters' as a GTX260, but no entry for the 9400GT exists. I have tried the 9400GT in both PCI slots and each time it does the same thing. If I pull out the GTX260 and ONLY run the 9400GT, I still get the pci-to-pci bridge issue, BUT I do get a picture and can boot into Windows 7 without a hitch. When I do this there is still nothing listed under the 'Display Adapters' as a 9400GT or even a VGA compatible device.
After messing around with this for 10 hours (yes, I said 10 hours) I decided to dig out my retired PCI video card (the Fx5500). When I installed this card I had no 2nd pci-to-pci bridge entry appear under 'System Devices', and the one that was listed had no yellow triangle or error codes. I then checked under 'Display Adapters' and Windows 7 had recognized it as a VGA compatible device and was asking for drivers.
I have now concluded that there is definitely no issue with the motherboard or any of my hardware (including video cards). At first EVGA Support and I had suspected that the motherboard may be bad because of all of the pre-diagnostic steps I had taken during my 10 hour ordeal. I'm not going to list everything I did because it would literally take 3 hours to type it all in. Just believe me when I say that I have tried most things including but not limited to the latest bios updates (flashed 4 times and completely reset to ensure accuracy), custom IRQ management, entire OS re-installation X2, multiple/latest chipset drivers installed, multiple/latest video drivers installed, memtest testing, complete hardware teardown and re-build (adding one device at a time), and MUCH more. The only thing I did not try was installing a different OS other than Windows 7 64-bit to see if I could replicate the issue. This is a waste of time though because lets say that I install Windows XP Pro and the 9400GT doesn't have this issue... Well, that's great, but who gives a damn about XP Pro when I have been using it for the last 9 years and when I have a full version of Windows 7 that I want to use? I'm certainly not going to run XP Pro over Windows 7 just to use this PCI video card. Second, if I install XP Pro and it still gives me the same pci-to-pci bridge error then again, I've only wasted more time because if its not going to work in either OS then Im sure as hell not going to leave XP Pro installed when I can use Windows 7.
Thanks,
piyush

Maybe stupid question now but has your posting anything to do with Toshiba and Toshiba notebooks?

Rage 128 PCI video card no deep sleep

Does anybody know of a PCI video card that I can use in my Quicksilver for a third monitor that will allow deep sleep. The Rage 128 does not.

Hi: That video card is not compatible with Windows Vista or W7.

Info wanted: ICE Avid Blue PCI Video Card ?

Picked up a used quicksilver, with a ICE Avid Blue PCI Video Card PN: 790-0202-00
Wanting to know more info about this card, what software is used with it etc . .
Appreciate any help

Hi Patrick, my pure guess is some of the older Avid Video products...
http://www.avid.com/US/products

Another PCI video card issue

Hello,
I bought my daughter this Lenovo 3000 h210 from Tigerdirect.com
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4167690&CatId=2630
She has an nVidia gForce 8450 PCI card she wants to put in the 1 vacant PCI slot. When she does that, the machine will not even boot up. If she takes the card back out, it boots up fine.
The PCI card does not require a seperate power connection, and she replaced the OEM power supply with a 550w one.
I keep reading about possibly having to go into the BIOS and disable the onboard video. I don't have direct access to that computer since she lives in another state, but she is telling me that there are only 2 choices, PCI-PEG and PEG-PCI. She says she had tried both settings and it still will not boot with the PCI graphics card installed.
Any idea how to fix this?

I was unable to find an answer, but was able to get the machine up and running. They took the PCI card back and swapped it for a PCI Express card. They plugged that one in and it worked immediately. So, I am guessing that this particular machine will not work with a PCI video card.
I hope this helps someone.

KT3 Ultra: AGP vs. PCI Video Cards

I am running an ATI Radeon 7000 AGP 64Mb video card on a KT3 ultra. I want to upgrade to a 128Mb video card. The KT3's AGP slot only goes up 4X. Most cards I have looked at are 8X only. Is it possible to run a 128Mb PCI video card. The MSI tech web page is lacking...please help.

any new agp card will work in it
a x 8 card will just run at x4
but as thats just a few percent slower who cares

P35 Neo2 PCI video card

Hi All,
I want use an extra video card and bought a PCI GS8400 512Mb.
After installing the card in the system the card is not recognized by the OS (Windows 7 U64).
There is a yellow exclamation mark in the device manager at the PCI to Standard PCI Bridge.
When I open the device is says 'Device could not start error 10'.
Does my board support video cards in a PCI slot?
P.S.: I tried the card in two other systems an it works fine.
Spec's:
Q6600 2.4 GHz at 3.2GHz.
8GB Ram.
GTX275 PCI-E video card.
GS8400 PCI video card.
2 x 30GB SSD RAID 0 disk for system
300GB disk for data
Windows 7 Ultimate 64.
Any ideas?
Regards,
PJGS.

Ok this what is tried last night:
- Fresh install Windows 7 Ultimate x64. Still an error on the PCI Standard PCI-to PCI Bridge. GS8400 card not recognized.
- Fresh instal Windows XP 64. Everything OK. GS 8400 card recognized and working.
- Upgrade XP 64 to Windows 7 Pro X64. An error on the PCI Standard PCI-to PCI Bridge. GS8400 card not recognized.
- I checked my other Intel based system and everything workes fine.
This system has an Intel ICH7 chipset instead of a Intel ICH9.
This must be a driver problem or a Windows 7 problem, and as so often the user is stuck in the middle.

Best PCI-X / PCI video card for Solaris 10?

I don't mean "best" in the "latest, greatest, fastest" sense, I mean best to denote visual properties and rendering, support, basically. My current machine (Compaq SR5250NX) has a PCI bus ATI Radeon 9250 (256MB RAM) that XSun detects and uses as an ATI 9200 Pro AGP. There are all sorts of performance/visual issues...when I minimize a window, it takes a second or two (literally) to minimize and you can watch it "draw down." Or sometimes when I minimize a window, it minimizes from the top down, and the desktop is redrawn vertically, very slowly. (So you can watch the window disappear top down.) This is *extremely frustrating and makes the entire desktop experience unpleasant. This is unfortunate because I really like JDS.
So, which card has the best Solaris 10 (XSun) support? It can be either PCI or PCI-X. All I do is write text documents, program, and other general tasks. No graphics work or anything of that sort. I don't care if it's old and I have to get it used...it just has to have awesome support and enough power to handle JDS and normal apps (Sun Studio, SO 8, FF3, etc). I'm on a bit of a budget, so if it's possible to get this card for around $100..that'd be great.
*Yes, I've read the HCL, and I know which cards are on there as supported, but it doesn't say anything about which card has the best support.
Thanks,
~Slow
Edited by: SlowToady on Nov 18, 2008 6:43 PM
reason: typo
Edited by: SlowToady on Nov 18, 2008 6:44 PM

Although I prefer ATI for personal use on other OSes, my last two Solaris workstations have had Nvidia Quadro video cards in them, and they've both worked very well. My previous workstation (A Sun w2100z that died a couple months ago) had a Quadro NVS 280, my new workstation has a Quadro Fx 1700, which performs extremely well even at 1920 x 1280. The Fx 1700 isn't what you would
call cheap, though.
You might want to try pick up a used Quadro NVS (at least something in the 2xx series), or one of the lower models in the Quadro Fx series.
Tim
PS: I'm going to be asking nearly an indentical question to this one in a minute, except about audio cards rather than video. :-|

NForce 420 + PCI video card

Okay here's my question I have a 16mb ATI All in Wonder 128 pro video card with pci bus. I want to use the features of the all in wonder but still use my nForce onboard video can this be done, with out screwing my video to hell?

Okay excellent I didn't want to throw it in until I confirmed with you guys I was pretty sure it was gonna be okay ........ I just updated my old system you see........ it was orignally a
Pentium pro 200
Matrox mystique card
64mb of edo memory
2gig HD
12x cdr
that was in 95
Anyway as of today it's a
Pentium 2 Overdrive processor running at 333mhz
256mb of edo
50gig HD
52x burner
16xdvd
64mb Geforce 2 PCI *no AGP SLOT*
and a 300watt powers suply ......
I'am still amazed at how well this machine still runs.
The geforce replaced my All in wonder that was previously there............. So all I have to do is pop the card in and set PCI video to 1st in the bios install drivers ............ And I'm good to go....

How do I get my NX6600GT-TD128E (PCIE) video card installed on a K8N NEO4-F Mb ?

I have received two new NX6600GT-TD128E (MS-8983) vdeo cards to install on my new K8N NEO4-F (MS-7125) motherboard flashed with BIOS ver 1.B.
First video card turned out to be bad. The replacement card allows view of bios screens and post screen, but when Windows XP (pro) starts up, the video goes blank and Windows XP locks up dead.
Any suggestions as to what I need to do to get the video card up and running?

Quote from: macprmgr on 19-March-06, 11:23:16
I have received two new NX6600GT-TD128E (MS-8983) vdeo cards to install on my new K8N NEO4-F (MS-7125) motherboard flashed with BIOS ver 1.B.
First video card turned out to be bad. The replacement card allows view of bios screens and post screen, but when Windows XP (pro) starts up, the video goes blank and Windows XP locks up dead.
Any suggestions as to what I need to do to get the video card up and running?
Can you tell us what other parts you have
Please read and comply with the Forum Rules.
I know you want the problem fixed but its hard to help if we don't know the basic's. Check the rules you will find they are a good place to start and for you to help yourself as well as others have an idea to help you

Final cut express HD with pciE video card

hi all
we just got the mac
and we got installed final cut express
but we got a problem
when we got to load the program we get an error
saying that we need an APG video card to use the final cut express HD ver 3
i had look for a patch for the last 3 hrs on the apple website and i didn't find anything that work at the time ...
thanks for any help ...

Click here and follow the instructions.
(21694)

TS1935 I have the video card model . What is the best video card for a 1.6GHz PowerPC G5 please?

Hello
What is the best (most modern and reliable) video card (AGP) which will work in a 1.6GHz PowerPC G5 (mid 2003)?
I believe I have ATY,RV350, and according to the attached article, it may be causing video start up problems.
Thank you
Adam

Hi Adam,
See japamacs page here on the best AGP cards for G4s & G5s...
http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
Rated slowest on top, fastest on bottom.
Though with no power loght & such, I'm not sure that is the problem or not... does the Hard drive(s) spin up?

Will a double-wide PCIe video card work with my iMac?

I have a 24-inch Aluminum iMac and plan on doing some serious gaming with it on Windows XP.
1. If I were to buy a graphics card, such as the soon-to-come 9800 GTX, would it fit?
2. What currently available NVIDIA GeForce 8800 and 9800 cards are Mac compatible?
3. Would it void my warranty if I switched it out myself?
4. Could I get a Genius at the Apple Store to put it in for me?
UPDATED by dotBran
Message was edited by: dotBran

There are no solutions that are going to give you better graphics performance than the graphics processor built into your iMac. Any external solution for driving a display would have to connect via USB or Firewire, either of which would be significantly slower than the onboard video.
Sorry, but if you want better graphics performance, you'll have to buy a different computer.
Note, though, that adding RAM to your system (your profile says that you only have 1GB) will offer improvements in overall performance and is highly recommended if you intend to run Windows, either via Boot Camp or a virtualization solution (most especially the latter).

Creative LAb pci video card model ct7260.

Similar Messages

Maybe you are looking for