Credit Management Horizon not in months

Hi All,
In Dynamic credit check, if i want to enable the horizon as weeks or days instead of months, how to do that. When viewing the credit check screen for dynamic credit check, the field for selecting the month/week/days is always greyed out with Month as the value.

Hi Nava
You can maintain any one value only, (month, week or day). It is not possible to change the options through the Automatic Credit check.
You can deceide which option to be selected using transaction OMO1 and select infostructure S066 and here you can change the value to Day,Week,month or posting period.  It gives option to select one and hence the same is reflected in the automatic credit control screen as well.
Hope the same has clarified your doubts.
Please provide reward points if the reply found useful
Thanks
Sankar

Similar Messages

  • Credit Management functionality not working properly during Delivery Execut

    Dear All,
    Complain from the Client: While creating Delivery documents the system permits the creation of Delivery in some cases when the Customer's Credit Limit is not sufficient to allow Delivery creation.
    Findings: After detailed analysis of System Configuration and transactional work flow following significant findings were noted;
    1.     Risk Category assignment & Credit Control Area assignment is no disabled at any stage of the business process in discussion.
    2.     The Delivery was created with transactional Credit Status "A" (Credit Approved) in cases when it should have been Credit Status "B" (Credit Not Approved) as the customer account did not have sufficient funds to accommodate the delivery.
    3.     Following Deliveries on PRD which were reported to have the above mentioned error, i-e, 80207442, 80224422, 80228126, 80230859, 80230863, 80230864, 80231004, after checking the deliveries it was established that system was not changing the Credit Status at Delivery Level to "B" in cases when it should be "B" rather than "A".  
    4.     The above scenarios have been configured and checked in the QA server, where system reacted as per the standard and no discrepancy was identified.
    5.     If the user deleted the delivery which had the bug reported as above, after deletion of that delivery and recreation of the delivery referring to the same Sales Order the system performed correctly unlike in the first case.
    thanks
    Shahid

    Hi,
    Please go through the link below, hope this help
    http://www.sap-img.com/sap-sd/credit-management.htm

  • Credit Management Function for Japan

    Is there is any specific functionality for Japan in Credit Management,
    We heard some of the functionalities used in Japan in the area of credit management is not covered by SAP, is that true?

    No replies, so marking as answered.

  • BP for Credit Manager - Launchpad Configuration

    Dear Experts,
    We have installed the Business Package for Credit Manager 1.4 on our SAP NetWeaver Portal and everything seems to be running smoothly.
    We would like to change some long text in the report launchpad, but we don't know how to. Normally I can configure the launchpad texts and queries in transaction SPRO on the source system, but an entry for Credit Manager does not exist.
    How can we configure the launchpad for Credit Manager?
    Thanks in advance.
    Andrew

    Hi Experts,
    If you know the answer to this question please help!
    Regards,
    Andrew

  • How can we change horizone period from Months to days in credit management

    Hi SAP SD gurues,
                                  Can anybody tell the procedure "how to change Horizone period from months to days in credit management in "OVA8" . As you may get month is greyed out in horizone period settings. Advance Thanks with warm regards.
                                                                          Kartik

    Dear Sadhu,
                      Sorry still i am not satisfied with your answer.As you hav told to go through the TC OVBI, there i found it is no where or little related to Horizon period of Credit management of SD module. In OVBI it is meant for "Maintain Billing plan type for Period Billing". Yes there is a combo box called "HORIZON", but i believe the purpose of this Horizon is diffrentthan the "Horizon period in SD Credit management. Pls correct me and explain me how it is related if i am wrong. Hope you'll do so.Thanks for yr valuable reply.Kartik...

  • Credit management not updated for the first credit blocked order only

    Hi experts,
    Pls help to solve. Thx.
    Case: The first sales order is created against credit block because the credit limit is exceeded. In FD33, no credit data related to the first order indicates, i.e. credit limit used shows zero as well as sales value, credit exposure. In VKM1, the blocked order can be captured.
    As long as the second order is created, the credit management can be updated. But, it still does not capture the data from the first order.
    The sales orders I test have the same delivery date.
    Questions:
    1. Is the standard behavior for the dynamic credit check?
    2. If not, how to make credit management consider the first order data?
    PS. In OVA8, update 000012 is applied while horizon is 4 months.

    Hello Jonathan,
    After testing, I found credit management can consider the first order data if using 000018 only. Why 000012 cannot consider it?
    I have checked the explanation for those two update groups by F4. I feel obscure about the explanation of sales order between them (see below).
    000012:
    Sales order
    Increases open order value from delivery-relevant schedule lines
    000018:
    Sales order
    Increases open delivery value
    By the  way, my testing data as below:
    1. were the two sales orders of the same document type? Answer: yes. Same document type, same customer, same delivery date, etc.
    2. were the item categories the same? if not, was one not relevant for credit check? Answer: Yes, the same.
    3. did the documents have the same value? if the second order had a lower value and was not blocked for credit, the exposure will be updated. Answer: yes, credit management can consider the second order data ONLY. It seems the first order have not been created if checking credit management.

  • Contract value not updated in open order value of credit management

    My requirement is i have created the contract and activated the credit management by assigning credit  group to contract document type, In item category the credit is active and in pricing subtotal is also assigned .
    But when i create the contract , the open order value is not updated .
    i do not want the credit to be active at order level.
    Dear guru's
    please let me know where i am going wrong
    thanks in advance

    hi,
    open sales orders value not updating currectly in sales value of CM
    http://wiki.sdn.sap.com/wiki/display/ERPLO/CreditmangementIn+SD-FI
    i think you have to run a report which is under the link number 1.
    regards,
    balajia

  • Not able to see specific tags for FSCM Credit Management on BP master data screen

    Hi All,
    I have already set up Collections & Dispute Management,
    I am now on my way to start FSCM Credit Management setting up. I have already created the BP role (UKM000) and assigned it for direction customer to BP, but I am not able to see any specific tag on BP Master data related to Credit management, (just as I can see "Collections profile" tag, in reference to Coll. Mngmt).
    So, I am not able to see these tags yet: "Credit profile", "Credit worthiness", "Cresit limit and control".....under Credit Management BP role!
    What am I missing there? Have I got to activate BAdi UKM_R3_ACTIVATE in order to be able to "see" those BP tags???
    ....Or what else?
    I will reward with points if someone can provide me any hint about this issue.
    Thanks a lot.

    Hi Pallavi,
    Many thanks for your quick response. However, I have not succeeded in seeing that tab.
    Let me tell you, I may be confused by a document I downloaded from internet about the BP master data views (as for the FSCM Credit Management role, of course) . Please find below the commented tag. It is an imaged I copy to you from that document I told you, for you to see which tag I am talking about:
    I don´t know the content of that tab...but I would like to see it in place....you know..
    Now, I checked you last answer and I saw that everything was already set by factory, please find below:
    BUS4 view:
    BUS5 view:
    However, I´m still not able to see the tab I told you at the beginning (first image). Am I confused about something here? Many thanks for your patience (these things happens when you set FSCM Credit Management for the first time).
    Is that tag accesible?
    Many thanks!
    Wilson

  • Credit Management- KRML Output not generated for Sales Order ( v.v.u.)

    <u>Credit Management - Credit control check at Sales order Level</u>
    While saving the Sales order,which failed the Credit check ( As per Automatic Credit Check Settings), there is no output generated for output type KRML, for Partner Fn KB/KM. Normally,If credit check is NOK, then while saving the sales order, an internal mail is sent to the SAP office inbox of the Credit representative ( KB/KM). There is option for an external send also. The problem faced by us is that, the mail is not going in SAP Office inbox in quality server , it is going in developement server.We checked in table NAST that the Output for KRML (o/p type) is not generated. Kindly suggest what could be the reason.
    Regards
    Sunil Kumar

    Dear Mr. Gauravjit,
    Thank you for your valuable reply.
    At the Extra-Output-Header-edit-goto-det analysis ,system give message as KRML o/p is not generated since Requirement 009 is not being fulfilled. But we checked the VBUK-CMGST = B is satisfied. Still the o/p not generated!
    Also , in VV11 we maintained the Cond Records. Still the o/p is not coming.
    The output is coming in Devlopment , but in Quality the output is not coming.
    Can anybody please help !
    P.S. I am colleague of Mr. Sunil Kumar, and reply on behalf of him.
    With Best Regards,
    Kaustuv

  • Credit Management-Sales value updated in FD32 even though credit set up is not active

    Dear Team,
    We are facing an issue where, for a sample order - sales value got updated as open sales order value against a customer in FD33.
    Credit set up is not active for the sales order type (OVAK) or the delivery type (OVAD). Since this has occurred in 2003, we have no clue what exactly has happened. We cannot locate any change logs in the configuration level.
    1) What is the possibility for credit management to be active for a document type, which was not meant for credit set up?
    2) How to remove the open order/ delivery value for the customer?
    Thanks and regards.
    Sivarajesh

    Credit set up is not active for the sales order type (OVAK) or the delivery type (OVAD).
    the above two settings  are credit checks at what level( example order level or delivery etc) you what to block the customer if the customer payer exceeds the credit limit.
    Where as if the credit active field is active in VOV7 in corresponding item category, system update the respective document values in to credit management (FD32/33) in your example open order value.
    Even though OVAK, OVAD settings are not done still system update the document values in to FD33 subject to credit active field is active in t code VOV7 .
    Please check in your item category whether credit active field active.
    thanks,
    Srinu.

  • F-21 is not updating last payment date in Credit management report

    HI Gurus
    I am working on 4.6C system . Here I am posting incoming payment through F-21 t.code. Here system not updating for last payment run in Credit management reports.
    Pls advice me in this regard.
    Thanks in advance
    Sneha

    Hi,
    F-21 T.code is for Transfer Posting, best Pratice is to use F-28 For incomming Payments.even in F-21 change the documents type to DZ and try to post.
    Thanks
    Goutam

  • I bought extenscript toolkit cc, in a monthly payment of 35 nic. i did everything acording to the instructions and the program i got is adobe aplication manager. and not the program for proccesing a picture - extenscript toolkit cc. please help me. hanan

    i bought extenscript toolkit cc, in a monthly payment of 35 nic. i did everything acording to the instructions and the program i got is adobe aplication manager.
    and not the program for proccesing a picture - extenscript toolkit cc.
    please help me.
    hanan epshtain

    I bought using the software Adobe Creative Cloud for one year.
    I pay in installments months 35 Nice ..
    Adobe sent me an inappropriate application ... I can not get the software I ordered ... I'm asking for help ..
    Unable to send email service department to get answers ..
    This problem ..
    Thank you
    Hanan.

  • Credit Management not activated in Delivery Order

    Hi,
    I've made relevant configurations in SPRO such that during the creation of sales order, credit management is activated. A warning message popup to warn user of the credit exceeded.
    However, during delivery order creation, such warning message does not get popup.
    I'm using the simple credit checks. In spro->sales & distribution ->basic functions->credit management->assign sales docs & delivery docs-> credit limit check for delivery types, i've set the relevant delivery type to have credit group 02 (Delivery) & 03 (PGI). Under the item cat for delivery order, i've also checked the active credit checkbox.
    Any config i've missed out?
    Thanks
    Regards,
    HweeLing

    Hi,
    According to your reply, I can only set credit checks popup message at only 1 place - Either sales order OR delivery order?
    Does it mean that if i have the check in sales order, I cannot have the same popup message in delivery order?
    Currently, i have the popup message in sales order.
    I do not want to block delivery order. I only want a warning message thats all.
    Thanks

  • Credit Management Check - Sales Value not updated in FD33

    Hi,
    We have configured Credit Management checks in our system.
    When we create a Sales Order that has exceeded the Credit Amount for a Customer we get a pop up saying "Credit Limit Exceeded by XXX amount. We proceed to save the sales order.
    By my understanding this amount XXX should get get updated in Transaction FD33 - Customer Credit management Display Status in the column "Sales Value". But this does not happen. The value remains as zero.
    What could be wrong here. Should this field not be updated with the credit value that the customer has exceeded?
    Thanks and Regards,
    Ashwin

    The Sales Value in FD33 transaction is the value of open sales orders as of that point. Now in your case if you are creating the first sales order and the value of that order is going beyond the allowed credit limit then and as per setting if system is blocking that order for credit faliure in this case system does not consider this order as open untill it blocked for credit.
    Check if the order is blocked for credit. Also see the status of the order in VBUK (status table).
    Hope this helps.

  • Credit  Managment : Profile tab  is  not  visible  in  BP

    Hi  All  ,
    I  am  working on  FSCM  credit  managment project.
    For  FSCM credit managment :
    I  have  activated  the  Badi : activation of  SAP  credit  managment (Interface  Set Active and FI_AR_Upadte mode)
    1)Set Active
    E_ACTIVE_FLAG = 'X' .
    E_ERP2005 = 'X'
    2)FI_AR_Upadte mode
    E_DIRECT_UPDATE = 'X'.
    But when  I am  selecting  the  Bussiness  partner   under (SAP  credit  managment role ).Profile  tab  is  not  visible .
    Please  help  me  out .
    Regards
    Rahul

    Hi,
    Pls check note 956054 and see if you have set up the business partner the correct way. This is the basis.
    Rgds,
    Richard

Maybe you are looking for

  • How can I get my iCalendars back?

    I deleted the calendars from my iPad mini because I thought I had messed up some of the events accidentally and just wanted to get the calendars from my MacBook to my ipad mini when I synced up. However, things went the other way when I synced and I

  • Sleep problem on new 1.5GHz Mac mini

    Anyone else having problems with their Intel-based Mac mini not waking up after it's been in sleep mode for a while (1-2 hours)? The mini's light stops pulsating when trying to wake it up from sleep, but only stays dim. It never actually wakes up. A

  • I only see 7 themes in imovie 10.0.2

    I only 7 themes in my imovie 10.0.2 whereas I should be able to see and work with 15. Anyone?

  • Ccms alert auto-reaction writing unix File

    Hello, I configured Automatic Alert Notification in RZ21 to send mail and SMS alerts when alerts are occured in RZ20 (CCMS_OnAlert_Email : frequence dump, lock oracle, process long running ,...) Now I would replace mail/sms Alert notification by writ

  • Javabean Refresh Problem

    HiHi, I have got a problem of refreshing a modified java program. I have created a javabean before, there are three fields are defined as float type. However, I have got some problem of using float, so I made a change on it to double. At the same tim