Credit management –impact in sales order if the order quantity is above customer credit limit..

Hi Team,
Can anyone help us to solve the issue in credit control process..our requirement is stock reservation should happen in sales order even if the sales order value is above the limit in customer master..
Please share the configuration ..
We tried many things but not working properly..
Thanks,

Hi Shiv,
thanks for the help
in this note , the point number 9 mentions that the result of rescheduling and manual stock reservation will be different if there is credit check in sales order.
is there any way to solve it? it is because our product list is so high..i run V_V2 for 1000 items for 800 items reservation happened propelry and for 200 V_V2 didnt confirm for some orders for the same do we need to run manual ATP??
Thanks to help us

Similar Messages

Partiral delivery of sales items in a service order brings the order header to in process

Hello Experts,
I am currently working on CRM 7.0, EHP 1.
I am creating a service order in CRM and the sales items in the order are replicated to a sales order in ECC. The header system and user status at this point is Released.
On creating a partial delivery for the sales items, the header of the service order is set to system status In Process. This doesnt allow creation of a confirmation because the header is no more released.
Is there a note to stop the system status change to in process ?
Thanks &Regards,
Itisha

Hi Rohit,
It is ideally required to have both higher item and subitem in delivery. However the moment there is a sub item, the delivery quantity for higher level item becomes 0 and hence this will not affect the quantity to be delivered. Hence the presence of higher level item will not impact the delivery or PGI in anyway. You can check this.
Similarly for billing, you can check the Billing quantity field in copy control between delivery and invoice. The value has to be either G or H based on the scenario you want.
Having said all these things, I think just adding the customer entered material either in the customer material field in sales order (I think VBAP-MATWA) or in some other Z field will relieve you of this big complexity. So unless or otherwise your customer i adamant on this, you can think of a simpler solution than the multiple levels of items.

BAPI_PRODORDCONF_CREATE_HDR - Error RU051 (Orders of the order type YGD1)

URGENT
Hi there.
I need to confirm orders thru a BAPI.
I think I can confirm orders with BAPI_PRODORDCONF_CREATE_HDR, however when I test on transaction BAPI (Tab --> Tools Single Test), and I enter the following data:
Orderid> 1000080 postg_data> 18.03.2008 yield-->2
I'm getting always the same error:
RU051 - Orders of the order type YGD1 cannot be confirmed.
If I use transaction CORK to check/confirm orders on my controlling area, the order types available are YB02 and YGD1 and if I use the above mentioned BAPI for any of these order types (YB02/YGD1) I always get the same error message (RU051). Can you please inform what I'm doing wrong?
Kind Regards
ASantos
Edited by: Armando Santos on Mar 19, 2008 10:13 AM
Edited by: Armando Santos on Mar 19, 2008 3:29 PM

Hello Armando,
I am getting the same error while executing the BAPI. Could you please let me know how you resolved this error.

I would like to know how to get the unrestricted quantity excluding actual customer ordr quantities on a given group of items?

I would like to know how to get the unrestricted quantity excluding actual customer ordr quantities on a given group of items?

Hi , Welcome to the HP Forums!
It is a terrific place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide.Learn How to Post and More I grasp you would like to replace the keyboard and would like the part number and where to purchase one. Here is a link to the HP Pavilion 17 Notebook PC HP Pavilion 15 Notebook PC Maintenance and Service Guide . Please note chapter 3, page 20, item 2 for the replacement keyboard part numbers. You stated you were having a difficulty locating where to purchase the part. Here is a link to HP Notebook PCs - Ordering HP Certified Replacement Parts for your convenience. You can also try a Google search with the part number for other vendors that may have one. To say thanks for replying please click the thumbs up icon below. If this has addressed your query please choose solution provided to help other people locate this information. Best of Luck!

Credit Management for different Sales Order Types

Hello All,
The problem is related to Credit Management for Sales Order which is explained below with an example -
We have separate Sales Order Types for New Launches (ZNLS) & Normal Depot Sales (ZDPS) but both the Order Types are assigned with same pricing procedure and respective orders will be raised against the same party code.Now automatic credit check is only active for order type ZDPS where the credit limit had been set to Rs.1000. Now Rs,.500 had already been raised using order type ZDPS, then another sales order of Rs. 500 is raised using order type ZNLS.But when a sale order of Rs. 550 is raised using order type ZDPS the sales order is getting blocked, because the system had taken into consideration & added up the Rs. 500 value of ZNLS with previous value of Rs. 500 against order type ZDPS as a result of automatic credit check though it is not active for order type ZNLS.Point to be noted that Credit exposure is also not active for Order Type ZNLS.
How is this taken into consideration & what are the steps need to be configured so that the credit limit check will not get automatically activated for order type ZNLS and only remain active for order type ZDPS despite they are assigned to same pricing procedure and used for invoicing same party code?
Please suggest.
Thanks & Regards
Priyanka Mitra

Hi Mitra,
The issue occurs because of the fact that credit check and the
update of the credit values are separate processes which are also
controlled separately by the respective customizing:
1. credit check is controlled by transactions OVAK and OVA8.
According to the attachment, you have already refered to note 18613 to
check the customizing settings.
2. update of the credit values is controlled by VOV7 or OVA7: "credit
acttive" flag. The 'Credit active' setting only affects the credit
update of the SD credit values (open orders, open delivery and open
billing documents). This flag has no control on the credit check. So
if for an order type, there is no credit check in OVAK and OVA8 but
the "credit active" flag is set for the item category, the order will
update the credit values even if no credit check is performed for the
order.
If the flag "credit active" is not set, the system will not update the
open credit values. On the other hand, the system ALWAYS updates the FI
credit value 'Open receivable' when the billing document is transferred
to Accounting. So, although you deactivated the "Credit active" flag in
in OVA7 or VOV7, such an item will increase the 'Open receivables' and
thus the credit limit used when the corresponding billing document is
posted to Accounting.
If you would like the value from sales order type ZNLS is excluded from credit update, you could consider set the "Credit Active" field as blank in VOV7 for the item category used for ZNLS.
Best regards,
Smile

Credit management module at Sales order creation

Hello Folks,
Can I confirm that when a sales order is created and customer master data code entered, eg , Payer or sold-to party or ship-to party, SD will integrate with Credit management module and do a credit check even before sales order is saved?
Likewise, at order creation stage, SD can also integrate with Project system for milestone billing?
With MM, SD checks the availabilty of material at order creation.
SAP SD integrates with CO only at PGI (via table 30 of MM ) and billing stage.
regards
Tom

The Credit Management check only for the payer's credit. The Credit Check can be configured to check even before the sales order is saved.
Goto T.Code OVA8 or SPRO>Sales & Dist>Basic Functions>Credit Management/Risk Management>credit management>Define Automatic Credit Control
Here you can configure. Check the field Item Check on the top left hand side.

Credit management for Old sales orders

Hi experts,
pls consider the follwing example where i am facing some problem.
I activated the Credit lock system in Sales order level (Warning message with release strategy)and in PGI. (Warning message with release strategy).
Customer A
C.limit : 10000
Outstanding : 7000
Sales value(Without pending sales order value): 2000
Eli gable new sales order value 1000
Pending sales order value 5000(Sales order no 111)
Now if i process this old SO no 111 in VL01N i am getting error that Order blocked due to credit limit. But i activated dynamic credit control only in sales order and in PGI.Not activated in VL01N level.
Awaiting for your valuable reply.
Thanks
SR

Hi
1.KIndly check in the sales order that you have maintain the payment guarentee procedure because of this the system is not allowing to do the delivery
PATH: VA02sales order no-Go toItembilling document---payment guarentee procedure
so kindly check that and remove or assign the financial document to that for processing the billing
2.Check the credit lock procedure is release or not
By doing above the issue will be resolved,kindly check and confirm.
if you have any further clarifications let me know
REgards
Damu
KIndly check the belwo

Credit block not allowing delivery dates on the order confirmations

Hello,
We are a full module SAP shop on ECC 6.0.
For one of our businesses, we have credit checking to take place at the time of Sales Order entry. This is causing an issue for the business because they are using Demand planning and need to have the Delivery Dates on the Order confirmations and they also want to be able to run an ATP check on the Sales Order. The credit check on sales order entry, prevents them from doing both of these things.
Does anybody know if there is a way to get the dates to show up on the order confirmations when a sales order is on credit block? Also, is it possible to run the order through ATP checking with this sales order credit block taking place?
thanks for your help!

Dear,
Ideally this question should have been posted in ERP SD forum.Please check out your credit check settings in OVAK and OVA8. Hopefully it help you.

[10g] OE schema - Matching Customer Sales Rep And the ORDERS table

Hi,
I have this query:
select c.account_mgr_id, o.sales_rep_id, c.*, 'o', o.*
from customers c,
orders o
where c.account_mgr_id = o.sales_rep_id
But I can't find which salesman places the order.
It looks like there is a hierarchy in the Sales Department, the Account Manager and the Sales Representative?
Am I missing another table from the OE schema?
Many thanks for your help.
Edited by: JeanParis on Nov 28, 2010 11:50 AM

SQL> select c.account_mgr_id, o.sales_rep_id, c., 'o', o.
2 from customers c,
3 orders o
4 where c.account_mgr_id = o.sales_rep_id;
select c.account_mgr_id, o.sales_rep_id, c., 'o', o.
ERROR at line 1:
ORA-01747: invalid user.table.column, table.column, or column specificationBut with respect to your question ... why do you believe the information is present?
In what table? In what column(s)?

Help! losing sales orders in the order list from cumulative value VK13

Hi Experts,
Now we are facing a problem that when user going to check for which orders the condition record was used, the T-Code is VK13.
Path: VK13 -> Display the condition record -> additional data -> Extra -> Cumulative values -> First Sales orders
they found some orders are missing in that list, but in previous system, the list was included all the order numbers which used this condition record, so it's confusing for them to tracking the utility of this condition record.
Can anyone share your idea on it such as 1. whether user exit exists there, what the user exit name? 2. whether configuration should be changed, which configuration should be modified, your idea will be highly appreciated!

Sorry for confusing, the thing is only the first 3 orders of individual month will be displayed. No issue now

Is it possible to deduct the amount of old A/R Credit Memo from new Sales invoice against the same customer ?

Dear Friends,
this issue is for my client which is in Retail Industry.
In sales when customer is buying items of Price 1000 and want's adjustment of Credit Memo Of Price 700 in this Invoice we have to do the following process :
1) Change The Payment Terms Immediate To Another like Net 30 (Because there is a default payment terms Immediate for all customer)
2) Add that invoice of Price 1000.
3) Open Incoming Payment-->Select Customer-->Select Credit Memo of 700-->Select that price 1000 invoice and collect remaining payment by payment means.
But this process is difficult to follow in Retail Industry. In all cases they collect the payment by Payment Means in A/R Invoice because there is a Payment Terms Immediate for all customers.
Is there any process by which we can select the credit memo like process in which we use for advance payment ?
or any other way to simplify this process ?

Hi Swapnil Vichare...
Create a credit Note 1st , then make a invoice with the credit note amount open.. and using the reconcilation you need to reconcile all the trascation...
No other possible ways, but using sdk you can develop..
Regards
Kennedy

Creating orders via the Order Management API

Hi there,
we are wanting to use the Order Management API (within Oracle 11.5.4) as a means of integrating with our B2B website. I am thinking of creating a Java class that will talk to the Order Management API - pass it a list of products (amongst other variables) - create an order, and then retun that order's details to the clients browser - via the Java class. So my questions are specifically...
1) is this possible, and am i heading in the right direction?
2) where would i find more documentation on the Order Management API - i only have 1 doco so far and it isnt too clear
3) has anyone had any experience doing something similar, and if so - can you give me any examples, tips etc etc
Please reply to [email protected]
cheers,
matt lemsing

I've done it a couple of times. I hope you have some help, and I assume you'll have to use Customer (AR/CRM) APIs as well as the OM APIs. My suggestion is to make you java beans in small pieces, don't try to do it all in one class. As for displaying the order back to the screen, don't forget a view or SELECT statement can also be viewed as an API. Keep it simple, don't try to get tricky.

Writing a trigger to update the QOH in a Parts table for for each item of the order whenever the order is filled. The trigger is for the OrderItem table when an item record is inserted into the OrderItem table.

Any ideas?

Hi,
If orderitem and parts are the only tables involved, and each orderitem references only 1 part, then it's pretty simple: just update parts, like this
UPDATE parts
SET qoh = qoh - :NEW.quantity
WHERE part_num = :NEW.part_num;
If you can modify filled orderitems (e.g., DELETE orderitems or change the part_num after the order is filled, or change the status from filled back to unfilled then it's more complicated; you might have UPDATE the :OLD.part_num as well as the :NEW.part_num
I hope this answers your question.
If not, post your best attempt, along with a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Since you're asking about a DML statement, such as UPDATE, the sample data will be the contents of the table(s) before the DML, and the results will be state of the changed table(s) when everything is finished.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

Have $25 I-Tunes card credit. Will not let me use the credits, tries to charge my credit card?

Have $25 I-Tunes card credit. Will not let ome use the credits, keeps trying to charge it to my credit card on file. How do you fix this on the new update?

For some reason this worked for me. I went into my account and changed my first name, maybe it causes itunes to reset. What ever it does my itunes works now.

How can one change the order of the issues (folios) in a custom viewer?

Hi,
I am trying to find how one can determine the order that the issues (folios) will appear in a custom viewer (multi-folio with subscriptions).
I tried to rearrange the order by changing the publication date in the Folio Producer Oorganizer, but it has no effect in the iPad custom viewer.
Thanks

The publication date settings determine the order of the folios in the library, so that should work. Did you update the folios?

Credit management –impact in sales order if the order quantity is above customer credit limit..

Similar Messages

Maybe you are looking for