Credit management mass change FD37 or F.34

Hi SAP Experts,
I'm confused in transaction code FD37 and F.34, I can't find any documents that would discuss their differences between SAP versions. I'm using 4.6c and both transaction are existing in table TSTC, however, F.34 is executable but FD37 not. I got an error 'System error: Error in routine TRANSAKTIONS_INIT M' when typing FD37.
I suspect that a key may be missing and could be corrected by a program adjustment or by changes in the parameters. Any of your advice would be greatly appreciated.
Thanks,
Keane

I can't use FD37, as it pops up the error. I'm looking for the reason why SAP didn't mention FD37 is not available in 4.6c, and I'm not sure how it goes in other SAP version, like ECC6.

Similar Messages

  • Mass Change in Credit Limit

    Dear All
    I have four company codes and i each company i have lot of customers and i have to increase the credit limit of customer at each company codes so plz tell me how to do this at mass level.
    Looking Forward
    Shujaat Abbas.

    > I have four company codes and i each company i have lot of customers and i have to increase the credit limit of customer at each company codes so plz tell me how to do this at mass level.
    Hi Shujaat,
    Try the following:
    T.code: MASS
    In the new screen, give business object as KNA1 (for customers), and click on execute.
    Under the tab "Tables", select the table KNKA (Customer master credit management: central data) and click on the tab "Fields".
    You will be routed to a screen where you have to give all the customer numbers and their respective credit control areas, for whom who wish to change the credit limit. Then click execute.
    In the new screen, there will be an icon "Select fields". Click on it, and select the field "Individual limit" and press enter. Beside "New values" give the new credit limit. Finally click on "Carry out a mass change"
    Save the changes.
    Hope this helps. Do get back if further clarification is needed.
    Regards,
    Swapna

  • Change in credit limit  :  mass upload

    Hi,
    I want to change credit limit of 2000 odd customers through ‘MASS’ or ‘MM17’.  The table and field name for this is knkk-klimk . The table is listed there but the field is not. Could somebody please help me in this.
    Thanks in advance
    Hrishi

    > I have four company codes and i each company i have lot of customers and i have to increase the credit limit of customer at each company codes so plz tell me how to do this at mass level.
    Hi Shujaat,
    Try the following:
    T.code: MASS
    In the new screen, give business object as KNA1 (for customers), and click on execute.
    Under the tab "Tables", select the table KNKA (Customer master credit management: central data) and click on the tab "Fields".
    You will be routed to a screen where you have to give all the customer numbers and their respective credit control areas, for whom who wish to change the credit limit. Then click execute.
    In the new screen, there will be an icon "Select fields". Click on it, and select the field "Individual limit" and press enter. Beside "New values" give the new credit limit. Finally click on "Carry out a mass change"
    Save the changes.
    Hope this helps. Do get back if further clarification is needed.
    Regards,
    Swapna

  • Mass change of pricing date and billing date in credit memo request

    Hi,
    Can i change the billing date pricing date on credit memo request docs using MASS transaction?
    If i enter the regular sales order number it prompts me to change the value but if i enter the credit memo request doc number,the message "No data meets the selection criteria" is displayed.I also checked with IDES ,message is the same
    Is there any different way to do mass change for credit memo requests or am i missing something here.
    Please Suggest
    Thanks
    Abhilash Nayak

    Hi,
    Go to the transaction code MASS  and enter the OBJECT  TYPE as BUS2032 and enter
    It will lead you to the next screen where you can find the  Table and Field TABS
    Select the  SALES ORDER HEADER DATA  and choose the fields data and choose the fields PRICING DATE and BILLING DATE  and execute
    In the subsequent screen you can see the selection screen where you can enter all the Sales documents for which you want to change
    Key in all the documents and execute
    Now change the date as per your requirement and check the effect
    regards,
    santosh

  • Mass Change in Recipe management (Transaction RMWB) - change specification

    Hello ALL,
    I am working on a Requirement - Mass Change in Recipe management (Transaction RMWB)
    Requirement - for a given specification number get the list of all recipes where this particular specification is used (this is achieved by standard functionality in RMWB)
    When a particular recipe is changed in a recipe - perform a mass change of specification across all the recipes.
    Things I have found already:
    This has to be done in similar fashion as status change is done using ABAP Class -CL_RCP_MSC_STATUS
    I would appreciate your help and suggestion in this.
    Regards,
    Nikhil

    Hi Beth,
    Yeah actually we did the same thing per your specs: non-status related although confined to preferred recipes, substituting substance X for Y in dependent formulas of recipes.
    The only option right I am aware of currently requires custom ABAP work using the Mass-Change framework supplied. 
    Regards

  • Changing Credit Management Contolling Area setup

    HI,
    We are considering changing the set up of credit management controlling area and I wanted to check if anyone knew the implications of changing the set up after it has been in use for some time.
    Currently we only have 2 areas with several company codes attached to each but we now have a requirement to manage the customers by company code only and it has been suggested we create one credit control area per company code.
    My current thinking is that to do this we will have to create the new areas,  update all the customer masters and FD32 records accordingly. 
    Can anyone think of any dependencies or actions I should be aware of before commencing and completing such a task?
    Thanks in advance.

    Hi,
    I know credit control area setup based on "every comp. code that is insured with the same credit insurance is covered from one credit control area".
    But this organisation also requires sometimes reorganization if credit risk insurance changes...
    Ensure proper testing of the changeover and keep in mind that RFDKLI20 processes an "internal VA02" means you have to run it when nobody else processes SD orders, master data,... Otherwise program is terminated.
    Best regards, Christian

  • Error:pricing procedure is getting changed in credit management

    Hi,
    Sales order is created.delivery is created
    In invoice its picking value from credit management.
    here pricing procedure is changing.
    What is issue for changing pricing during invoice and taking credit managment.
    regards
    SAP SD User

    In invoice its picking value from credit management.
    here pricing procedure is changing.
    What is issue for changing pricing during invoice and taking credit managment.
    Can you please explain your requirement with some more examples?I did not understand the the above.
    thanks,
    Srinu.

  • How can we change horizone period from Months to days in credit management

    Hi SAP SD gurues,
                                  Can anybody tell the procedure "how to change Horizone period from months to days in credit management in "OVA8" . As you may get month is greyed out in horizone period settings. Advance Thanks with warm regards.
                                                                          Kartik

    Dear Sadhu,
                      Sorry still i am not satisfied with your answer.As you hav told to go through the TC OVBI, there i found it is no where or little related to Horizon period of Credit management of SD module. In OVBI it is meant for "Maintain Billing plan type for Period Billing". Yes there is a combo box called "HORIZON", but i believe the purpose of this Horizon is diffrentthan the "Horizon period in SD Credit management. Pls correct me and explain me how it is related if i am wrong. Hope you'll do so.Thanks for yr valuable reply.Kartik...

  • Update group change in credit management

    Dear All
    We had earlier update group '00012' for the credit management. Now we want to change the update group to '00015' . We have changed so , it is working fine , but the earlier credit exposure was based on update group '00012' , hence sales value is open sales order value . Now while applying group '00015' , it should consider only open deliveries
    After changing , we have also executed f.28 to re-organise the credit limit, still the credit exposure is not getting updated.
    Kindly suggest any remedy.
    Regard
    AVS

    Tyr execute the prgram - RVKRED77  and check once.

  • Enterprise Compensation Management - Mass date change of IT 0759

    We run ECC 5.0 SP45 (for HR)
    We currently use the Enterprise Compensation Management (ECM) process for our Merit Increases and Bonus assignments. 
    This year, at the end of the process (meaning that everyone is in Approved status on IT 0759), Management decided to change the effective date of the Merit Increases. 
    Does anyone have a suggestion (other than create a bdc session) that would allow me to mass change the effective date of this particular comp. review item on IT 0759, without impacting the bonus review item?

    Hi Laural,
    Instead of BDC, you can use the ECM function modules.
    Get the infotype data through HR_ECM_READ_INFOTYPE
    and change the data through HR_ECM_MODIFY_INFOTYPE.
    And the BEGDA and ENDDA in 759 would be the same as of the payment date. So you would be changing both dates here to the new payment date.
    I cannot think of any other alternative solution.
    Hope this helps.
    Cheers,
    Subbu

  • Customer Credit Management Change

    Hello Gurus,
    I am trying to implement credit management and when i am using FD32, i am not able to enter anything in the fields other than Horizon. What should i do in order to maintain credit management completely. Please help. Thanks.
    Regards,
    Pranava

    Dear,
        Please go via this link,
         [http://www.sap-img.com/sap-sd/credit-management.htm]
         please search the thread before posting your question.
    Regards,
    Sandip

  • Mass Change in Recipe Management

    Is anyone doing non-status related mass changes in RM?  Specifically, is anyone substituting substance X for substance Y in dependent formulas inside recipes?  If so, was the related work in-house ABAP development or SAP CDP?  Any helpful hints would be very much appreciated.
    Beth Perry

    Hi Beth,
    Yeah actually we did the same thing per your specs: non-status related although confined to preferred recipes, substituting substance X for Y in dependent formulas of recipes.
    The only option right I am aware of currently requires custom ABAP work using the Mass-Change framework supplied. 
    Regards

  • Item credit price changed in Sales order - credit management.

    Dear Friends,
    In Sale order item change log shows ' item credit price changed' . Item credit price  comes from 'Total ' value line in pricing which is the sum or prices and taxes. But where as none of prices and taxes that contribute to this total have been changed,  the change long shows item credit price as changed from a value to other .
    This sale order has many items and for most items same is the case. For some items it looks like quanity got confirmed eventually through back order or availability check from VA02. The  change log for the document also shows 'credit released value' also as changed.
    User wants to know how item credit price which is nothing but total value line is shown as changed when none of the prices and taxes have been changed
    Could someone throw light on this?
    Regards
    Mahesh.

    Hi Murali ,
          First, Thanks for the reply .
        In this issue what happened is,  after couple of items  added, the sales order was released for credit check. Later changes have been made to this credit released document either by way of adding new items or by confirming the availability check for some items . Because of this change log is showing ' realeased credit vlaue' as changed from certain vlaue to the other . How this could have affected change in item credit price    which is coming form toal value line which is nothing but netvalue ( price -disccount+ taxes assingend with subtoal 'A' ) ?
    What exactly is the concept of released credit value and its relation to item credit price ?
    As per releasing the document that is not a problem but user's request is he  wants to know why this is happening .
    Please help me in understanding this better.
    regards
    Mahesh

  • Mass change function in Recipe Management

    Hi All,
    Please provide the configuration details of Mass change function recipe management

    Are you asking for the IMG path?
    For starters, see - http://help.sap.com/erp2005_ehp_04/helpdata/EN/72/9a167ae92b46fca46751c976babe5d/content.htm?frameset=/EN/be/e1763ae5d73023e10000000a11402f/frameset.htm

  • Credit Management-XBLOCKED

    Hi;
    I need to know how to release business partners which are blocked in credit management. I need a mass process. Any programs, function moduls?
    Thanks.

    Hi,
    did you ty to build a LSMW?
    Else, if it is a one -off you could change in table (UKMBP_CMS_SGM) direct. Ensure you have with appropriate approvals/ documentations/ as required.
    Regards
    Hein

Maybe you are looking for