Credit management requirement

Hi,
Guys i have the b/m requirement w.r.t. credit management.
i am very confused on the same.
-.The credit period of 45 days from the date of placing the order(i.e sales order) will be admissible to the customers of the company.
-. Customer will be required to issue a post-dated cheque on the due date of payment for 95% value of the order.
& The order will be taken for production by the plant only after post dated cheque for 95% value of the order has been received by the branch and confirmed to Head Office.
-.The balance amount against the supplies received by the BP against the purchase order shall be payable after the receipt of the goods by him. This outstanding amount shall be a part of credit limit.
-.At no given time the total credit exposure (including the value of post dated cheque) against BP shall exceed 50% of the invoice value to him in preceding 90 days. In case the business partner has already utilized the credit limit agreed for him, the supplies will be made against cash payment only.
-.If any payment is received from BP in less than 45 days, he shall be entitled for credit note @ 1.5% per month.
CAN ANYBODY HELP ME TO MAP THE SCENARIO IN SAP ON THE SAME.
Rgds

Hi,
For credit period of 45 days. configure payment terms.
SAP does not have a solution for post dated cheques. However you can use F-49 - Noted Items for post dated cheques.At the end of due date, use F-28 - incoming payments.
For Credit Limit, Configure Credit Management,Refer to this website.
http://www.sap-img.com/sap-sd/credit-management.htm
In case of cash payment, you can use F-28 or F110, you have to use cash GL Account.
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

Similar Messages

Credit Management requirement for cash business

Hi Gurus,
Actually my client business is a cash business, there is no credit concept for the customers.
My requirement is when i create a sales order, system should check the credit balance of the customer(Business receives the payment through cheque and entry is made in f.28 transaction) and should compare with the current document value and if it exceeds, then system should through the error.
And if any open sale orders exists for this customer, system should even consider those values while credit check is happening.
And the exceptions for this requirement is
1.Credit check option should be there only for specific case of customers i,e based on account group of customers.
2.There are very few customers(around 5) where they give credit.
Pls guide me, early resposes woould be highly appreaciable.
Thanks in advance
Regards
Mahendar.

hello, friend.
you can consider using the payment guarantee scenario in credit management. the customer advance payment could be treated sort of as a financial document or payment card.
as for the selective application of credit controls based on customer group, i believe you do this be configuring risk categories and assigning them to the appropriate credit account master data.
regards.
Edited by: jonathan y on Apr 24, 2009 12:57 PM

AR Report Requirement - Customer Credit Management - 0FI_AR_9

HI There,
We have a requirement in AR report to add the below fields from Customer Credit Management Datasource 0FI_AR_9
KNKLI - Credit Control Account- 0CRED_ACCNT
KLIMK - Credit Limit - 0CRED_LIMIT
CTLPC - Risk Category - 0RISK_CATEG
Except KNKLI (Credit control account), remaining two fields are master data.
Can we use the data from 0FI_AR_9 by writing look up? Please suggest.
Thanks
Vandana

Hi,vandana_ir
i don't know what's your requirement else,if you wanna add those fields to the report
those below solution may be can help you
1.data loading into InfoObject etc.0customer
2.using virutal key figure tech to read customer value from infoObject.

Typical requirement in Credit Management-

Hi ALL,
I have posted same query earlier too,but i havent get any satisfactory reply.so
time being i closed that thread.
Here is my client req, regarding Credit Management.
Client is restricting customers credit based on Credit period ( payment terms)
Client wants to check customers based on Credit limit & credit period whichever is earlier/lower.
eg: Customer -X credit limit: 1,00,000/-
Credit period - 30 days
then when creating Order, if customer's outstanding exceeds credit limit then
block should trigger- ( which is std settings)
- if customer has not cleared open items which is 30 days old,block should trigger
irrespective of value. ( which can be achieved through "open item"- in OVA8)-
customer place the release schedules everymonth, for the next 3 months.
eg: Material- A, req - April- 1000pcs / May-2000pcs/June-1500 pcs
where as in Std, I have maintained "Fixed date & qtty" in availability check in OVZJ
so that only "confirmed qtty" should transferred to MD04 ( as per credit block,requirement will not
be confirmed in schedule lines in order for all items)
as per credit check result,requirement of May/June should not transfer to MD04
only April req should transfer to MD04.
Any Ideas -

Hi,
I'm not sure, but perhaps you can define an own subroutine in OVB8, subroutine 101 (report LV07A101). Design the algorithm for months and check it.
Another idea. Check the BADI 'MD_CHANGE_MRP_DATA', method 'CONSIDER_OTHER_SD_TYPES'. Considerer the example implementation.
I hope this helps you,
Regards,
Eduardo

New Requirement credit management SAP SD

Hello GuRus i am new in SAP SD please help
My client want to implement credit management as
For Ex. Company want to give credit limit to its Agent 100000 inr
For example 5 customer is associated with this agent then company again want to give 30000 to all associated customer to agent
Means credit limit of 5 customer *30000= 150000
But credit limit of agent is less than customer associated with him
In this case customer directly paying to company but agent takes responsibility to collect money in case he default
How to implement and what enhancement required

Hi
Maybe you can try with the parent son scenario. Please, see SAP Note 1011714 - Sales values / Credit exposure in scenario Father - Sons for further information.
I hope this helps you
Regards
Eduardo

Letter of Credit functionality and Credit Management

Hi,
we want to use Letter of Credit functionality for exports.
Currently, we have an ERP system that contains the sales data. In a separate system we have the credit management functionality (Financial Supply Chain Mgt - FSCM).
When order is created, the credit limit is checked in the FSCM system (via PI messages).
Now, we want to link some of the Sales orders with Letter of Credit. I believe, this is standard functionality in GTS.
So when Sales Order is created a LOC should be connected to this.
Can the GTS be connected also to FSCM credit management, so credit limit is not affected?
Example:
Sales Order value: 1 Mio USD
10% down-payment > this would be in the credit exposure visible (net exposure).
90 % covered through LOC > credit exposure should showing this, or it shows order value and in a negative figure this amount deducted so no effect on exposure.
Down-payment has no relation to LOC. When money is received for this the net exposure of the sales order is 0.
partial invoice: 0.4 Mio USD > it should be possible to link this invoice to the LOC. The posting FI document should have some LOC information, so when payment comes in the amount in LOC is reduced as well as in credit management this open.
Final invoice 0.5 USD: as above, all values go out from exposure if there are any.
A second case would be guarantees, where there is no reduction of values. This would stay same.
Anyone who can advise a solution here?
Thanks + Regards
Hein

Letter Of Credit can be used as a standard solution of SAP GTS with ERP solution. Yes you can connect both SAP & no SAP systems with GTS, but plugins, PI etc needs to be built in. But it would not be real time like RFC works. There are some standard available which needs to be hard coded to meet specific requirements.
Connecting LOC to Sales Order, invoice etc, is manual, based on business specific parameters and it comes standard with SAP GTS. Maintaining Values & Quantity of LOC based on actual LOC from bank is also possible. The depreciation of values & quantities is also standard with in LOC in GTS.
You can also setup various communication methods for LOC.
I think when Invoice is raised and payment is received the LOC should be closed in the system. There can also be other scenarios where in system determines LOC based on predefined logics for determination strategy put in to the GTS system.
Cheers,
Abir

Outbound IDOC for Credit Management

HI All,
We need to send the Credit management data from SAP to other system. For that we require Standard IDOC, could you please suggest the standard IDOC available for the same and how to configure it. Please let me know if we have any standard program which generates the IDOC for my requirement.
Regards,
Phanindra

Thanks for the Input, could you please let me know how we trigger this IDOC. Is it through configuration or any standard program which will generate idocs.

Creating the New Update groups in case of the Credit Management

Hi Can any one help out in the following requirement:
Is it possible to Create a new update group in case of the Credit Management?SAP standard provides only three update groups viz., 000012, 000015 and 000018. We would like to have a customized group in order to meet the clients requirements.
          Also is it possible to update the open contracts value in the credit exposure?
   Thanks & Regards
   Soma

HI
You can define your own credit groups according to your client's requirement.
here is the path....
IMG > SPRO>SALES AND DISTRIBUTION --> BASIC FUNCTIONS -->
CREDIT MANAGEMNT / RISK MANAGEMENT --> CREDIT MANAGEMENT
--> DEFINE CREDIT GROUPS --> NEW ENTRIES AND CREATE YOUR OWN
CREDIT GROUPS AS UR UR REQUIREMENTS.
hope this will help u ...
bye

Credit Management Process based on Terms of Payment.

Hi All,
My Client wants to use SAP Credit Managment Process. The SAP is currently being used but without Credit Management. As per my initial discussion I have enclosed the requirments below. Your Kind Help will be highly appreciated.
1.     The Process has to be implemented in a 2 Step Process.
2.     The Initial Requirement is based on Terms of Payment. If the Number of Days is Overdue for the Invoice for a particular Customer, the system should issue a warning message (in the Form of Mail or any other way) which can be shown as evidence to the Customer for collection of Payment so that further Sales Transactions can take place.
(Is there the standard Process in Credit Management based on Terms of Payment)
3.     In the next step Value Base Credit Check has to be implemented. The Value will be set for a particular Customer in Credit Master. When the Sales Order is raised and if the Credit Limit is exceeded the System should issue the warning message. Based on the Warning Message Issued an email should triggered to the particular person in Finance that the Credit Limit for a particular person has been exceeded and Credit Limit needs to be increased.
Thanks & Regards,
Sam.

Dear Mr F Farooq,
1. The Process has to be implemented in a 2 Step Process.
Do the following configurations for credit management :
Refer the following link.
http://wiki.sdn.sap.com/wiki/display/ERPLO/CreditManagementConfigaration
2. The Initial Requirement is based on Terms of Payment. If the Number of Days is Overdue for the Invoice for a particular Customer, the system should issue a warning message (in the Form of Mail or any other way) which can be shown as evidence to the Customer for collection of Payment so that further Sales Transactions can take place.
(Is there the standard Process in Credit Management based on Terms of Payment)
Now for this requirement, since different billing documents for the same customer can have different payment terms (whcih means different billing will be due on different date) , please make the following changes in OVA8
Check for 'oldest open item'
Now follow my reply in the below thread.
Sales order to be blocked based on customer payment terms and credit limit
You can use WORKFLOW to trigger mail when such a message is triggered in the sales order , due to credit check.
Ask your ABAP-er for details on workflow.
3. In the next step Value Base Credit Check has to be implemented. The Value will be set for a particular Customer in Credit Master. When the Sales Order is raised and if the Credit Limit is exceeded the System should issue the warning message. Based on the Warning Message Issued an email should triggered to the particular person in Finance that the Credit Limit for a particular person has been exceeded and Credit Limit needs to be increased.
Just configure according to the thread given for 1st POINT.
CHECK FOR DYNAMIC and set reaction as 'C' and check STATUS /BLOCK.
Maintain the credit limit in the FD32.
Now when the sales order value exceeds the credit limit , a message will be triggered.
Use the concept of WORKFLOW to create mail based on this message .
When the user gets mail, he can maintain the new credit limit in FD32 and release the document for delivery/billing in VKM3.
Revert back if there is any issues.
Thanks & Regards,
Hegal K Charles
Edited by: Hegal . K . Charles on Aug 7, 2011 1:19 AM

Credit Managament: avoid credit block for down payment invoices

1) Downpayment - when an order is blocked, can we create a billing
document of the downpayment request created in slaes order. Logically
the customer wants to pay for this downpayment immediately and process
the order
Notes: If credit management is activated at sales order level and In
Milestone Billing scenario or Project Sales order scenario, at Sales
order level we have a Downpayment (Z0000 - Downpayment) Milestone
usage and Other Milestone invoice Usages.
The business requirement is Customer need to pay the downpayment
invoice before executing the Sales order.
In SAP when the Sales order is blocked for Credit Management, system is
not able to create the Downpayment invoice also. to creat the invoice
we have to release the order first. However we dont want to release the
order but want to receivce the downpayment and then may be we can
manually release the order and process. The reason is suppose we have
an automatic release to production or PR or creation of service order,
we would like to process them only after the downapayment, now for
creating the wownpayment invoice for receiving the downpayment, we have
to release the order which shall further process the order
automatically. Please suggest a solution for the same to avoid the
credit block for the Downpayment invoices.

I think this can be enabled easily.
For the combination of Credit Control Area, Credit Group and Risk Category, you should have enabled the Dynamic/Static credit check, you can configure it such a way that it only gives you a warning message and doesnot block your sales order. This should solve ur problem

Setting approval level for credit management in SD

Dear Gurus,
I have a case like this:
My client would like to use credit management in SD. They have few approval levels for for credit limit release.
Exp: With SD has amount under from 1000$, Mr. A has the right to approve and release it
        With SD has amount bigger than 1000$, Mr. A have to release it and then Mr. B check again afterwards Mr. B can reject and release it up to his decision.
As I see in SAP, maybe there is only one level for check and after release the SO doesn't need other approve anymore. But I am still concerning about how to find or config to satisfy this requirement.
Thank for nice support!

In our case we have maintained a view named as "ZVW_OAR_WF_CTRL" which is created by our ABAPer.
The fields in this view are
   FIELD NAME                              DATA ELEMENT         TYPE         LENGTH
1) MANDT                                          MANDT                         CLNT             3
2)PROCESS                                      ZDE_WF_PROCESS      CHAR           2
3)KKBER                                           ZDE_KKBER                  CHAR          4
4)GRUPP_F                                       ZDE_GRUPP_CM_FROM CHAR         4
5)GRUPP_T                                       ZDE_GRUPP_CM_TO      CHAR         4
6)LEVELS                                         ZDE_WF_LEVEL              CHAR         5
7)VALUE_F                                       ZDE_NETWR_AK_FROM   CURR       15
8)VALUE_T                                       ZDE_NETWR_AK_TO         CURR       15
9)APPR                                            ZDE_PLANS                       NUMC      8
10)APPR_AD1                                  ZDE_PLANS1                    NUMC       8
11)APPR_AD2                                  ZDE_PLANS1                   NUMC        8
12)BOX_AC_APPR                           ZDE_AD_SMTPADR_BOX CHAR       241
13)BOX_AC_REJC                            ZDE_AD_SMTPADR_REJ   CHAR      241
14)NEXT_LEVEL                              ZDE_WF_LEVEL_NXT         CHAR       5
You can ask your ABAPer such that your view contains the above mentioned fields and in the the approvers you have to enter the "Pernr id" s of approver s which can be taken from HR people.

Credit management automatic credit control use of credit group

Hello gurus
1)In the credit management we have credit groups( which enables us to combine different sales
document types for the purposes of credit management).
In the simple credit check also we will assign the doc types to check the credit. Then please tell me why we need credit groups in automatic credit control? Here also we can assign the doc types to check the credit ?then what exactly is the use of credit group ?
2)where will we specify the total credit amount allowed of the credit control area?
3)In the automatic credit control (ova8) against to static check box option we have open orders and open delivers checkboxes. is this two boxes only specific to static or it also belongs to dyanic?
Is it necessary to check this boxes?
4)is any one have used any of the routines in automatic credit control( document controlling tab we have no credit check field here we specify the routine? If any business need please share with me
Thank you in advance for all the replies

Hi
For your 1st query , In credit mgmt we assign credit grps to sales document type. So as you said we will assign credit grps at simple credit check and coming to the Automatic credit check we assign credit grp for the sales document type also .But the difference is credit grp can be at order level or Delivery Level or PGI level in OVA8 in Automatic credit check .
Coming to your 2nd Query , we will specify the total credit limit in FD32.
For your 3rd query , In OVA8 apart from the static check we check the boxes open orders and open deliveries also because once you activate Automatic credit check and once you maintain credit limit for any customer then system will check the open orders and open deliveries also of that customer
Coming to your last query the routine feild can be used when some requirements have to be fulfilled then only automatic credit check should work for customers. or else the sales order ->delivery->PGI will happen normally
Regards
Srinath

Confirmation qnty in sales order with credit Managment

Hi    SD Experts very Good Morning ..
Generally in OVB8-- 101 Requirement and 1 Routine   controls , once customer crossed his credit limit automatically Confirm qnty become zeo and and once we release that document in VKM3 Again confirmed qnty will be active mode for the customer .... this is sap Function once we removed 101 routine it wont work like this
But ....
In this link clearly mentioned in sales order -- Fixed qnty/date one field is there if we activate also system confirms stocks 0 in case credit limit customer crossed his limit
http://monicaradytia.wordpress.com/2014/02/21/fixed-quantity-and-dates-in-sales-order-document/
So both functionality is same ... a bit confused sir
please share your dynamic knowledge
Thanks a lot
venu

""""""Generally in OVB8-- 101 Requirement and 1 Routine   controls , once customer crossed his credit limit automatically Confirm qnty become zeo and and once we release that document in VKM3 Again confirmed qnty will be active mode for the customer .... this is sap Function once we removed 101 routine it wont work like this"""""
The routine which you are suggesting is prerequisite to update MRP.
(please dont mix this with credit management--that is a different concept all together)
Fixed date & Qty:
this indicator you can check at transaction level or at configuration level(by default for your sales area)
The purpose of this indicator is How to confirm or assure your customer(there by he can assure to his consumer)
Once you activated this indicator means at transaction level/(or Default for your sales area):
At customer level:
You are assuring your customer that you will give the required Goods on this specific date.(here the customer priority is not the Question)
At Business level:
After activation of this flag,your MRP will be updated and in case if you are rescheduling all your sales orders--this order will be skipped from others--so MRP department need to plan/Procure/Produce these goods on the specific date mentioned.
As far as i know these two are completely different in their respective Properties.
Needless to mention here--whether you are confirming or not ,still you can update MRP by using delivery Blocks concept.
Phanikumar

Contract value not updated in open order value of credit management

My requirement is i have created the contract and activated the credit management by assigning credit group to contract document type, In item category the credit is active and in pricing subtotal is also assigned .
But when i create the contract , the open order value is not updated .
i do not want the credit to be active at order level.
Dear guru's
please let me know where i am going wrong
thanks in advance

hi,
open sales orders value not updating currectly in sales value of CM
http://wiki.sdn.sap.com/wiki/display/ERPLO/CreditmangementIn+SD-FI
i think you have to run a report which is under the link number 1.
regards,
balajia

XI and Credit Management in FSCM 6.0

Hello,
We have ERP2005 with FSCM and want to use the Credit Commitment interface ( http://help.sap.com/erp2005_ehp_01/helpdata/en/43/2a1c518e5f601fe10000000a422035/frameset.htm ) to pass FI-AR data to SAP Credit Management via XI. The sender is the FI-AR system and the receiver is the SAP Credit Management system Both FI-AR and FSCM are on the same ERP2005 system and XI is on a seperate system.
I have downloaded the XI content for the the intefaces CreditCommitmentNotification_Out and CreditCommitmentNotification_In and set up the configurartion so messages come out of ERP and the determined receiver is the same ERP system but my problem is with the receiver communication channel. The SAP help link referenced above says I should be using the communication channel XIChannel. Can someone help me and tell me what type of communication channel this is and what I have to do set it up please.
Thanks in advance for your help.
Pete

Felipe,
Thanks for the info it solved the problem and the interface works now. For future reference in case anyone has the same problem the scenario is as follows
Sender                  = ERP (FI module)
Sender interface     = http://sap.com/xi/PI/FIN/Operational/Global
Sender namespace = CreditCommitmentNotification_Out
Receiver = ERP (FSCM)
Receiver interface     = CreditCommitmentNotification_In
Receiver namespace = http://sap.com/xi/FSCM/Global
No interface mapping is required just set up the receiver determination with receiver determination to use a receiver communication channel of type XI.
Thanks,
Pete

Credit management requirement

Similar Messages

Maybe you are looking for