Credit problem-urgent

Hi all,
I have got an Issue.
The outsatnding amount of a customer is more than the credit limit of the customer, but its still allowing to make the bill.
how it is possible

Dear Sourav,
1.Check have you maintaining automatic credit control or not , If yes please check the combination is correct or not (Credit control arearisk ctegoryCredit group).
2. If you are maintaining the automatic credit control you need to maintain check credit as 'D' for your order type at OVAK transaction.
3.Check the credit group assignment to your documents at OVAK.
4.Check the settings related to static or Dynamic in the transaction OVA8.
I hope it will help you
Regards,
Murali.

Similar Messages

Excise Credit Problem - Urgent

I have a typical condition to deal with.
We have a situation where we had taken modvat in March07 of few excisable items. and now we have to take goods receipt in month of april 07. so we want to take cenvat credit in april and want want to update the stock and excise register accordingly. how can we go for...
SAP B1 is being implementd from 01/04/2007 and we have considered opening balances as on 01/04/2007. AP invoice of this case has already been done in last financial year which had reflected in the opening balances which we had enterd.
Plz helppppppp!!!!!!!!

Hi Amol,
I understood that you have availed CENVAT in March. But you are going to book that goods receipt in April.i.e Next Year.
You can do two things: One you can do regular transaction and then you can reverse the CENVAT Jouranl.
If you dont want to calcualte excise, then you have to untick the Excisable Option in Goods Receipt and Then you have to create a new tax code for excise but not using CENVAT. Now You post the invoice. SAP wont ask for Incoming Excise Invoice

Blackberry wont send/recieve calls and texts. Net apps and BBM working fine. Not battery, signal or credit problem.

My phone wont recieve texts or send SMS or phone calls. Have tried on many peoples phones, on different networks.
Have had this phone a couple of weeks. It was working fine until yesterday, now suddently when I attemp to call it says 'failed' and when i send tects they do not send. It wont recieve calls and tects from people who have tried in the same room.
I have this sim card years and have never had a problem before.
Untill yesterday I could call, text and recieve both just fine.
My BBM, app world and internet are working.
It is not a battery problem, it is charged.
It is not a credit problem, i have both free and actual credit.
it is not signal problem, the phone shows high signal, and other people on same network are working fine.
I have looked up simular problems, and attempted the solutions. Taking the battery out and resarting the phone does not change it, regestering the phone and sending service books did not fix the problem.
I have Blackberry Curve 8520, on Tesco pay as you go.
Any solutions? Please include instructions - i do not know how to find out what OS i am running, so if this is part of the solution please advise.

Hi Ammasay
Phone, SMS and MMS are all services supported by your wireless provider. Considering all of these features are not working, I would recommend contacting them to find out if there is a problem with your account or their services. BlackBerry features, such as BBM, BlackBerry App World, etc all use the BlackBerry network and thats why they are still working.
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Duplicating de confirmation for Clients with credit problems

Hi,
We are using GATP to confirmed the sales orders quantities. In the check instructions,
we are using check availability and then RBA (product substitution)
When I create a sales order for a client with credit problems the confirmed quantity
is being duplicated after releasing the order.
The steps I am following are next:
1.        VA01: create sales order (i.e: order product D 10 PC, I got 10 PC of product E confirmed because of the RBA)
2.        VKM3: Release the order
3.        VA03: display the sales order
(it duplicates the lines with confirmed quantity - i.e: I got line 10: product D 0 PC confirmed; line 11: product E 10 PC confirmed; line 12: product E 10 PC confirmed, so line 12 is repeating line 11)
We have explore any issues related to the availability check, but it seems to be a problem with the configuration of the credit processing.
Have you ever had this issue? Any recommendation to solve it?
Thanks a lot in advance.

777,
Are you using product allocation?
In what case you see duplicate confirmation? in case of partial delivered order? if so check OSS note 1442425.
Regards,
Harshil Desai

J2EE StartUp Problem, URGENT.

Hi all!
I'm having a problem since friday with the J2EE Engine Startup. The problem is that MMC says me that the server is running but i can access to the server by anyway. The developer trace of the jcontrol process is:
[Thr 2968] Tue Aug 09 13:59:50 2005
[Thr 2968] JControlICheckProcessList: process server0 started (PID:1544)
JStartupStartJLaunch: program = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
-> arg[00] = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
-> arg[02] = -DSAPINFO=J2E_00_sdm
-> arg[03] = -file=C:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
-> arg[04] = -nodeName=sdm
-> arg[05] = -nodeId=2
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_2964
-> arg[07] = -jvmOutFile=C:\usr\sap\J2E\JC00\work\jvm_sdm.out
-> arg[08] = -stdOutFile=C:\usr\sap\J2E\JC00\work\std_sdm.out
-> arg[09] = -locOutFile=C:\usr\sap\J2E\JC00\work\dev_sdm
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
-> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
-> exe path = PATH=C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
[Thr 2968] Tue Aug 09 13:59:51 2005
[Thr 2968] JControlICheckProcessList: process SDM started (PID:1556)
[Thr 1188] Tue Aug 09 14:01:01 2005
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] Tue Aug 09 14:01:58 2005
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] Tue Aug 09 14:10:25 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:15:45 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:20:46 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:26:06 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:31:07 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:36:27 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:41:28 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
Then i try to login the visual admin gives me a windows error and the msg_server process shuts down alone. Then i restart that node and agregate the following lines to the trace:
Thr 1188] Tue Aug 09 14:42:25 2005
[Thr 1188] *** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c      2488]
[Thr 1188] *** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c      1652]
[Thr 1188] Tue Aug 09 14:42:27 2005
[Thr 1188] ***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi_r.cpp 8588]
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:32 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:38 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:44 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 1188] Tue Aug 09 14:42:49 2005
[Thr 1188] JControlMSConnect: reconnected to message server (toshiba-user/3601)
[Thr 1188] Tue Aug 09 14:48:11 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:53:12 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:58:32 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
I try to login the visual admin again and gives me the following error: "Cannot open connection on host: 191.9.6.22 and port: 50004"
Looking the log and trace files i see the following errors:
- SAPEngine_System_Thread[impl:5]_5##0#0#Error#1#/System/Server#Plain###Encomi: failed to connect to toshiba-user/3201(Connection refused: connect)#
- java.net.SocketException: socket closed
     at java.net.PlainSocketImpl.socketAccept(Native Method)
     at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
     at java.net.ServerSocket.implAccept(ServerSocket.java:448)
     at java.net.ServerSocket.accept(ServerSocket.java:419)
     at com.sap.engine.core.port.impl0.ServerSocketListener.run(ServerSocketListener.java:87)
- erver socket listener opened by service on socket encountered error. The listener will be stopped.#2#p4#ServerSocket[addr=/0.0.0.0,port=0,localport=50004]
I dont know whats happening, if somebody knows i hope that helps me. Please is urgent.
Thx and Rgds.
Gregory

Hi, thx a lot both.
Respect the link
http://<hostname>:50<instanceno>00/sap/monitoring/SystemInfo , i cant access it. I cant access by telnet, by visual admin.
In the work folder under \usr\sap\<sid>\JC00 i found that the last updated files are:
- available.txt that contains the following data:
    Unavailable 08.08.2005 10:46:53 - 08.08.2005 10:58:54
    Available   08.08.2005 10:59:54 - 08.08.2005 13:52:54
    Unavailable 08.08.2005 13:53:54 - 08.08.2005 13:53:54
    Available   08.08.2005 13:54:54 - 08.08.2005 14:03:54
    Unavailable 08.08.2005 14:04:54 - 08.08.2005 14:04:54
    Available   08.08.2005 14:05:54 - 08.08.2005 14:34:54
    Unavailable 08.08.2005 14:35:54 - 08.08.2005 14:39:44
    Unavailable 08.08.2005 14:56:17 - 08.08.2005 16:24:13
    Unavailable 08.08.2005 16:28:07 - 08.08.2005 16:29:07
    Unavailable 08.08.2005 16:34:36 - 08.08.2005 17:17:58
    Unavailable 09.08.2005 08:13:36 - 09.08.2005 08:54:33
    Unavailable 09.08.2005 08:57:04 - 09.08.2005 12:46:25
    Available   09.08.2005 12:47:25 - 09.08.2005 13:26:25
    Available   09.08.2005 13:43:56 - 09.08.2005 13:55:56
    Unavailable 09.08.2005 13:56:40 - 09.08.2005 14:04:57
    Available   09.08.2005 14:05:57 - 09.08.2005 16:16:57
    Unavailable 09.08.2005 16:17:57 - 09.08.2005 17:27:12
    Unavailable 10.08.2005 08:10:30 - 10.08.2005 08:35:39
    Available   10.08.2005 08:36:39 - 10.08.2005 09:16:39
    Available   10.08.2005 12:33:51 - 10.08.2005 14:01:51
- dev_jcontrol that contains the information displayed in the developer trace of jcontrol process(and y mentioned above)
- dev_dispatcher that contains the following info:
    [Thr 2664] Wed Aug 10 08:33:04 2005
    [Thr 2664] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2664] JLaunchISetClusterId: set cluster id 5761000
    [Thr 2664] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2664] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 3320] Wed Aug 10 08:33:21 2005
    [Thr 3320] JLaunchISetP4Port: set p4 port 50004
    [Thr 3528] Wed Aug 10 08:33:26 2005
    [Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
    [Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
    [Thr 3584] Wed Aug 10 08:33:55 2005
    [Thr 3584] JLaunchISetHttpPort: set http port 50000
    [Thr 2664] Wed Aug 10 08:34:02 2005
    [Thr 2664] JLaunchISetState: change state from [Starting (2)] to [Running (3)]
    [Thr 2568] Wed Aug 10 08:34:08 2005
    [Thr 2568] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 3660] Wed Aug 10 08:35:07 2005
    [Thr 3660] JLaunchISetP4Port: set p4 port 50004
    [Thr 3600] Wed Aug 10 08:36:34 2005
    [Thr 3600] JLaunchISetHttpPort: set http port 50000
    [Thr 3612] Wed Aug 10 12:43:40 2005
    [Thr 3612] JLaunchISetHttpPort: set http port 50000
    [Thr 3612] JLaunchISetP4Port: set p4 port 50004
    [Thr 3612] JLaunchISetTelnetPort: set telnet port 50008
- dev_server0 that contains:
    [Thr 2676] Wed Aug 10 08:33:06 2005
    [Thr 2676] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 2676] JLaunchISetClusterId: set cluster id 5761050
    [Thr 2676] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 2676] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 4296] Wed Aug 10 08:34:58 2005
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
    [Thr 4296] Wed Aug 10 08:35:00 2005
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPConverters
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPCharToNUCByteConverter
    [Thr 4296] Wed Aug 10 08:35:01 2005
    [Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPNUCByteToCharConverter
    [Thr 2676] Wed Aug 10 08:35:07 2005
    [Thr 2676] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    [Thr 208] Wed Aug 10 08:36:34 2005
    [Thr 208] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
I still dont know whats happening. And i need to solve the problem urgent. I hope u can help me.
Thx and Rgds.
Gregory.

DATE FIELD PROBLEMS - URGENT

I´m having trouble with FormsCentral.
My form is running about 8 months with no problems.
Yesterday people started to complain that the system doesn´t accept any date.
That means the date field restricts date entries, from date dd/mm/aaaa (brazilian format) to another dd/mm/aaaa, but every date that users input in, is considered by the system as invalid, even it´s a correct and valid date right between the interval specified!
I need Help Urgent!!!
I depend on these forms to finish the payrol service from here.
Thanks
I´ll be waiting.
Maurício Galletti
Message was edited by: SNOWMAUSS
It look like the system accepts just dates starting from the date of today.
I´m testing.
Please help.
Thanks
Message was edited by: SNOWMAUSS
It looks like the system have some problem just with the date 20/10/2013?!
I´ve fixed the problem change the interval from 20/10/2013 to another date and used 21/10/2013 to another date and it works!
But I think something is wrong with the 20/10/2013 date?!
To reproduce the erros just create a new form with date feature with this exaclty configurations and the bug appears:
I´ll keep waiting
Message was edited by: SNOWMAUSS

Hi
I´ve concluded that the problem persist if the date interval starts at the
specific date "20/10/2013". Don´t know why?!
Look at the screen capture above, you aks for
Thanks a lot
image: Imagem inline 1
Maurício P. Galletti
Contador
[email protected]
( 55 11 3331-5567
www.cadt.com.br
2013/10/29 Genevieve Laroche <[email protected]>
Re: DATE FIELD PROBLEMS - URGENT created by Genevieve Laroche<http://forums.adobe.com/people/Genevieve+Laroche>in
FormsCentral - View the full discussion<http://forums.adobe.com/message/5797083#5797083

Details: i can not buy any thing from the app store and any thing from in side any games pls fix my problem urgent and as soon

Details:
Hi i can not buy any thing from the app store and any thing from in side any games pls fix my problem urgent and as soon
Note this is second email pls answer and fix my problem
<Email Edited by Host>

These are public forums, you are not talking to iTunes Support here (most of the people here, including myself, are fellow users) - I've asked the hosts to remove your email address from your post
If you are getting a message to contact iTunes support then you can do so via this page and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

Pricing problem-Urgent

Hi all,
iam getting a problem regarding pricing.
When i make a Sales doc. with reference to an invoice,
everything is being copied from invoice to the sales doc.-customer, material and its no. , sales area, payment terms, incoterms, and material qty. also.
But the pricing of the invoice is not getting copied on to the sales doc.
I have maintained all checks available in the sales doc. type and the item category of the sales doc. type i.e
Pricing: X
and then in OVKK , i have maintained the doc. pric. procedure of the sales doc. type with the pricing procedure of the invoice
and again in the copy control measures, i have maintained
Pricing type: D
But i still not able to copy pricing procedure from the invoice to the Sales doc.
I want the soltn. urgently.
Thanks in advance
Sourav

run VTAF for your sales doc type/bil type
and check item category
set flag for "update doc flow"
and pricing type B

HTML Link problem (Urgent!)

I'm writing a prrogram that displays an HTML file. I used a JEditorPane. I tryed using the hyperlinkListener but it doesn't work! here's the class I wrote...
can anyone help please?
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
import javax.swing.*;
import browser.*;
import java.net.*;
import javax.swing.event.*;
* Classe :
* Description :
* Societe : Medias France
* @version 1.0
public class Aide extends JFrame implements HyperlinkListener
     BrowserInterface bI;
     URL url1;
     static Interface parent;
     public Aide(String titre, Interface i)
          super(titre);
          parent = i;
          getContentPane().setLayout(new BorderLayout());
          //bI = new BrowserInterface(jp);
          setBounds(10,10,800,600);
          addWindowListener(new WindowAdapter()
               public void windowClosing(WindowEvent e)
               quit(null);
          try
               url1 = new URL("file:/home/darkazan/java/BDO/tablegen-1.8/help/help.html");
               //bI.URL_Process(url1);
          catch (MalformedURLException e)
               System.out.println("probleme " + e.toString());
          JEditorPane editorPane = new JEditorPane();
     editorPane.setEditable(false);
     try
     editorPane.setPage(url1);
     catch (IOException e)
     System.err.println("Attempted to read a bad URL: " + url1);
     JScrollPane editorScrollPane = new JScrollPane(editorPane);
          editorScrollPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED);
     editorScrollPane.setPreferredSize(new Dimension(800, 600));
     getContentPane().add(editorScrollPane, "Center");
     pack();
     setVisible(true);
     public void hyperlinkListener(HyperlinkEvent e)
          if (e.getEventType() == HyperlinkEvent.EventType.ACTIVATED)
     // do something on HL click
System.out.println("ouverture");
          if (e.getEventType() == HyperlinkEvent.EventType.ENTERED)
          // do something on mouse over HL
     // do something on HL click
     System.out.println("bbbbbbbbbbbbbbbbbbbb");
if (e.getEventType() == HyperlinkEvent.EventType.EXITED)
// do something on HL click
System.out.println("ggggggggggggggggggg");
// do something on mouse moved away from HL
     public void hyperlinkUpdate(HyperlinkEvent e)
     public static void main(String[] args)
          Aide aide1 = new Aide("Help", parent);
     * Quitter l'application
     * @param     e L'evenement recu
     * @return     Sans objet.
     void quit(ActionEvent e)
          parent.bAide.setEnabled(true);
          dispose();
}

also check your file protocol it should look like this: file:/// with three slashes(i think?)
here Mr. Urgent, my html viewer: (and it works) ;P
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.text.*;
import javax.accessibility.*;
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.net.MalformedURLException;
import java.io.IOException;
public class iROCHelp extends JPanel implements HyperlinkListener{
//ATTRIBUTES
JEditorPane html;
private static boolean HelpShowing = false;
private static JFrame selTopic;
//METHODS
//Constructor
public iROCHelp(java.net.URL URLstr){
//setBorder(new EmptyBorder());
setLayout(new BorderLayout());
try{
URL url = URLstr;
if(url != null){
html = new JEditorPane(url);
html.setEditable(false);
html.addHyperlinkListener(this);
JScrollPane scroller = new JScrollPane();
JViewport vp = scroller.getViewport();
vp.add(html);
vp.setBackingStoreEnabled(true);
add(scroller, BorderLayout.CENTER);
catch (MalformedURLException e){
System.out.println("Malformed URL: " + e);
catch (IOException e){
System.out.println("IOException: " + e);
}//HelpTopic CONSTRUCTOR
public void hyperlinkUpdate(HyperlinkEvent e){
if (e.getEventType() == HyperlinkEvent.EventType.ACTIVATED){
linkActivated(e.getURL());
}//hyperlinkUpdate
protected void linkActivated(URL u){
Cursor c = html.getCursor();
Cursor waitCursor = Cursor.getPredefinedCursor(Cursor.WAIT_CURSOR);
html.setCursor(waitCursor);
SwingUtilities.invokeLater(new PageLoader(u, c));
}//linkActivated
class PageLoader implements Runnable{
PageLoader(URL u, Cursor c){
url = u;
cursor = c;
public void run(){
if (url == null){
// restore the original cursor
html.setCursor(cursor);
Container parent = html.getParent();
parent.repaint();
else{
Document doc = html.getDocument();
try{
html.setPage(url);
catch (IOException ioe){
html.setDocument(doc);
finally{
// schedule the cursor to revert after
// the paint has happended.
url = null;
SwingUtilities.invokeLater(this);
}//else
}//run
URL url;
Cursor cursor;
}//PageLoader
public static void spawnHelp(java.net.URL URLStr){
if (!HelpShowing){
selTopic = new JFrame();
selTopic.getContentPane().setLayout(new BorderLayout());
selTopic.getContentPane().add(new iROCHelp(URLStr),BorderLayout.CENTER);
Dimension dim = selTopic.getToolkit().getScreenSize();
selTopic.setLocation((int)dim.getWidth()/2-selTopic.getWidth()/2,(int)dim.getHeight()/2-selTopic.getHeight()/2);
selTopic.setSize(500, 400);
selTopic.setTitle("Remote Operators Console Help");
selTopic.addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent e){
closeHelp();
}//windowClosing
selTopic.show();
HelpShowing = true;
}//if help showing
}//spawnHelp
public static void closeHelp(){
if (HelpShowing){
selTopic.dispose();
HelpShowing = false;
}//closeHelp
}//HelpTopic CLASS

Media reconnection problem URGENT!

I am in a very urgent situation.
Working on a feature length project and today after opening 2 sequences I was working on yesterday I had to relink media, because my scratch disks were not connected.
While relinking, final cut pop up says that some clips' media start & end has changed , continue with relinking or cancel. I had to continue work so I went on. Alas, now i am in front of a nightmare!
Both sequencies have been altered. In some areas the edits look the same but the content is different, in other areas cuts have been totaly removed.
please help.

Thank you for trying to help. These file were imported by log and capture and were atomaticaly converted to prores 422 LT. I did not mess around with file names, as the names were given during the log and transfer proccess.
This is definetely a final cut bug.
The problem dissapeared (not solved though, as the reasons remain unknown) with the folowing way:
a) I open one of the backed up files and looked at my rough cut wich consists of sequencies.
b) By playing the 2 specific sequencies on the rough cut, there was no error in the edit.
c) By opening these 2 sequencies on the project browser, there was a different edit !!!!
d) By going back to the rough cut and double clicking on the nested sequence, I could see the original edit.
e) Now I had one specific sequence in the timeline, the same name, the identical sequence, opened in two different tabs. In one tab (the sequence that i entered to through the rough cut) the edit was the original, in the other tab (the one that i opened through the project browser) the edit was distorted !!!
f) I copied the clips of the original edit to a newly created sequence.
g) I deleted the old- problematic sequence
h) i repeated the process with the second sequence that was altered by final cut on its own will.
I hope this will help someone in a similar situation and I keep this question as unsolved, because in reality noone really knows - until now- the reason for this situation. Thank god it was solved.

MSI 6368 with USB problem (URGENT)

I have an urgent need to solve this problem.
Client has a computer based on this motherboard, with Celeron 1.1 Ghz, WIN 98 Second Edition.
The USB port works with a Microsoft mouse. Client tries to install a Canon digital camera (D60), but the USB port cannot see the camera.
Is there something I should be doing?
Thanks a lot

try a different cable? Not sure about Canon but they might need a program that they supply with the camera to move the files off of the camera. Sort of like MP3 players and how they ship with their own proprietary software to move files onto the player and etc.

Foreign currency debit, credit problem

Hi Expert,
My co they migrated newly new gl .
FAGL_FC_VAL forex valuation, Instead debited the balance of the account its crediting, and some account instead of crediting the balance its debiting. I checked oba1, ftxp everthing perfectly its there.
Creditor balance debiting, debtor balance debiting.
Regards
Mani.S

Hi Experts,
Valuation method
PAYB - exch rate for debit, credit bal-B
RECN- exch rate for debit, credit bal-G
TER - Exch rate for debit, credit bal-G
valuation area
H1 - PAYB
H2 - RECN
H3 - TER
Assignment of accounting principle
IFRS
Valuation Area and accouting principle
H1 - IFRS
H2- IFRS
Under Parallel accouting accounting principle assigned to target ledger 0L
Everthing there till we facing problem
I am not asking the customization for foreing currency, Because I am in supporting team Co already migrated to New GL.
I want only solution. the problem Instead of debiting its crediting and vice versa.
This problem not before implementing new GL
Regard
Mani.S

PROCEDURE PROBLEM, URGENT ...

Hi ,
I am geting an error while puting hint in a sub query. The query is like this
SELECT /*+ INDEX (EMP EMPIDX) */
EMPNO
FROM EMP
WHERE DEPTNO IN (SELECT /*+ INDEX (DEPIDX) */ DEPTNO FROM DEP);
My query is similar to the above one. And this query is part of Cursor defination in a Procedure. So when i try to compile the procedure it gives me error like
PDE-USW002 The source of the stored program unit source is incomplete.
QUESTION IS HOW TO AVOID THE ERROR. Because if i remove the hint this statement takes about 21 mins, if I put the hint it runs in 30 seconds. So I need the hints put in place badly . Please suggest something . This is very urgent .
Thanks
Feroz

If that is really what is causing the problem and it won't compile in Forms Builder, then about the only way would be to create a server-side package/procedure, and call the procedure from the form and do the work on the server, and pass back the results to the form via parameters in the procedure call.

File Related problem--- Urgent

Hi Friend's
I have a Problem that and i am Looking for the solution. please Help me.
There is a big file that content 5 lack record or may be more then this. my task is that i have to read this file and if there is any duplicate record then i have to remove this. for that i take two file.
1. out.csv
2. Reject.csv
out.csv content unique record and that record witch are duplicate i have to keep this on reject.csv
Logic...................
1. First i read my main file and keep this record in a vector. now i again read a record from main file and check that this record is in vector or not. if yes-- then keep this in reject and if not then keep this in out file. but this logic fail because of that when record reached till 2.5 lack then exception come out of memory. vector size is too much big.
2. in second for i read a record from main file and then write this in out file. next time when i read this file
then at the same time i read out.csv and match main file reaord with the record of out file. if match then keep this in Reject.csv else write this in out.csv. this will also fail becouse it is taking more then 10 hours as i feel.
so i want help in the problem so that i can form my task in very short time period.......................................
it's very urgent for me. my project is dependent on this thing. Help me.
Thanks

Well 2.5 lakh records is a huge number as far as applying logic is concerned and keeping that in memory like a vector or something is certainly a bad idea.
If the Stated was a give case to me.I'd try apply data pagination here is a sample logic which i can think off.
1).I'd first define what is so called a Records as an entity or a javabean which overides equality method of two objects depending on stated logic
2).I'd first fix a constant pagesize depending applying some probablity logic.
3).Now i'd choose three set of files on which i delete the second file once the merging process is completed.
4).Now on the first go i'd like to parse the the intial file and extract records and save them as JavaBean instances and save in a SortedSet / TreeSet interface.
5).Consequtively, i'd be running a different thread which works on a Random Access file and inserts records in that temp random access file.
6).Now,if the size of Set attains the fixed page size cache the results in Random Access file using the other thread and the empty the set once
7).Would repeat the process uptil end of the parent file.
8).Now,from the second file apply your initial logic only change is you'd using a Set of Entites.
9).That should reduce the your memory problem to a larger extent.
and The reason why i'm going for Set doesn't save duplicate records.
or as said adviced by my fellow posters you might think of using a database in place and solve the issue with simple database queries and expressing the entities accordingly.
REGARDS,
RaHuL

Confirmation Mail Problem (urgent Solution) Please

Dear Guys,
After over the Registration Process, I want to send one confirmation mail. Mail Coding is properly worked. Only mail sent to my company id. But not to send yahoo, rediff and other things. what is the problem. I have changed the coding lot of time. But i was confused. I don't know what is the exact solution. If anybody knows please tell me. Urgent thing.

Hi This is My JSP mail coding. Any problem in my mail coding. Please see that and tell me what did i do the errors. I dont know what errors?
String host="mail.myCompany.com";
String from="[email protected]";
String to=ss; // �ss� is JSP requestParameter name "to address";
String subject="Confirmation Mail From MyCompany";
String text = � Hereafter You will Access my Company mails�;
boolean sessionDebug = false;
Properties props = System.getProperties();
props.put("mail.host", host);
props.put("mail.transport.protocol", "smtp");
Session mailSession = Session.getDefaultInstance(props, null);
mailSession.setDebug(sessionDebug);
Message msg = new MimeMessage(mailSession);
msg.setFrom(new InternetAddress(from));
InternetAddress[] address = {new InternetAddress(to)};
msg.setRecipients(Message.RecipientType.TO, address);
msg.setSubject(subject);
msg.setText(text.toString());
Transport.send(msg);
out.println("To: " + to);
out.println("Subject:"+subject);
out.println();
out.println(text);
response.sendRedirect("jseeken.jsp");
Now I have installed the free smtp server. But I don't know how to configure. Please tell me the exact solutions. I am awating for your reply.
regards
pooja

Credit problem-urgent

Similar Messages

Maybe you are looking for