"creta user" in an "after insert" table trigger

Dear members,
I'm having trouble when I want to create an oracle user in a trigger after inserting in a table.
It says that I don't have privileges to do so, but my user is DBA, and I can create a new user directly with no problem from this user.
Do I need a special privilege for some actions through a trigger ?
Is user creation possible at all in such a trigger ?
Thanks for your help.

My guess is that you have the create user privilege granted to you through a role, not directly. Stored procedures don't know about privileges you have through roles.
Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com/askDDBC

Similar Messages

ORA-29532 exception from after insert update trigger

Trigger code:
CREATE OR REPLACE TRIGGER SAMS.PERS_ALG_AIU_TRG
     AFTER INSERT OR UPDATE
          ON PERS_ALG
          FOR EACH ROW
DECLARE
     trans_type          VARCHAR2(1);
     event_id          CONSTANT VARCHAR2(7) := 'A31_ZA1';
     data_src          CONSTANT VARCHAR2(15) := 'SI_A31_ZA1_VW';
     p_row_id          ROWID;
     select_stmt          VARCHAR2(5000);
     XMLString          CLOB;
BEGIN
     IF INSERTING THEN
          trans_type := 'I';
     ELSE
          trans_type := 'U';
     END IF;
SELECT ROWID
INTO p_row_id
FROM personnel
WHERE pers_seq = :new.pers_seq;
select_stmt := 'SELECT * FROM si_a31_ZA1_vw WHERE start_date = MAX(start_date) AND ROW_ID =chartorowid('''||p_row_id||''')';
     -- Produce the XML
XMLString := si_lib.get_XML(select_stmt);
     -- Insert the transaction
     INSERT INTO si_transaction (transaction_type, event_id, status_id, timestamp, transaction_xml)
          VALUES ( trans_type, event_id, 'CR', SYSDATE, XMLString);
          EXCEPTION
               WHEN OTHERS THEN
               RAISE_APPLICATION_ERROR (-20040, sqlerrm);
END;
... is causing ORA-29532 JAVA call terminated by uncaught java exception: java.lang.nullPointerException
any ideas --- get_XML actually calls dbms_xmlquery.getXML

When in doubt, break it into pieces and test the pieces. The following is not valid:
SELECT * FROM si_a31_ZA1_vw WHERE start_date = MAX(start_date)
Try replacing the above with:
SELECT * FROM si_a31_ZA1_vw WHERE start_date = (SELECT MAX(start_date) FROM si_a31_ZA1_vw)

After insert & update trigger

I need to write a trigger that if some columns of the master table have changed, the trigger will first insert the change to a copy table. Later on, if there are more changes to the master of the same row, it will compare the new value to the old value and delete the same row in the copy table and insert the latest change. I have wrote the following trigger. Some how when I run it, it has compilation error. Does anyone have any idea on how should I approach this?
create or replace trigger TRITON.AFTER_INSERT_UPDATE_ITM001100after insert or update on TRITON.TTIITM001100for each rowdeclarev_reflag char(1);beginv_reflag:='0';if (:new.T$ITEM != :old.T$ITEM or :new.T$DSCA != :old.T$DSCA) then
delete from ticcrm.ttiitm001100_copy;
insert /*+append*/ into ticcrm.ttiitm001100_copy(T$ITEM, T$DSCA, T$DSCB, T$DSCC, T$DSCD, T$WGHT, T$SEAK, REFLAG)values(:new.T$ITEM, :new.T$DSCA, :new.T$DSCB, :new.T$DSCC, :new.T$DSCD, :new.T$WGHT, :new.T$SEAK, v_reflag);
end if;
end;
/

delete from ticcrm.ttiitm001100_copy;
insert /*+append*/ into ticcrm.ttiitm001100_copy(T$ITEM, T$DSCA, T$DSCB, T$DSCC, T$DSCD, T$WGHT, T$SEAK, REFLAG)values(:new.T$ITEM, :new.T$DSCA, :new.T$DSCB, :new.T$DSCC, :new.T$DSCD, :new.T$WGHT, :new.T$SEAK, v_reflag);
This is simple SQL statements, not PL/SQL.
Use EXECUTE IMMEDIATE for executing it.
P.S. Please do not forget to make good formatting of your code before posting it.

Insert data into msql thru table trigger

Hi,
I installed dg4msql 11.2 and I would like to insert some data into our msql thru one of our Oracle table after insert table,
I used the syntax below
insert into test@dg4msql ("PN") values (:new.PN)
but the below error problem if I insert data into my Oracle table,
ORA-02054: transaction 4.17.15898 in-doubt
ORA-028500, connect from ORACLE to a non-Oracle system returned this message
[Oracle][ODBC SQL Server Driver][SQL Server] Invalid object name "RECOVER.HS_TRANSACTION_LOG
Do I have to create the HS_TRANSACTION_LOG table in my msql server to resolve this problem?
Thanks
Vincent

Vincent,
If the gateway insert is being done as part of a trigger then it will almost certainly be part of a distributed transaction so yes, you will have to create the transaction log table and the recovery user in the SQL*Server database.
As well as the gateway documentation have a look at this note in My Oracle Support -
Note.227011.1 How to Setup DG4MSQL to Use Distributed Transactions (Doc ID 227011.1)
Regards,
Mike

After insert trigger error

Hi,
i have created an Trigger After Insert According to me, It's correct But it show me Error Can Not Insert Null in to code.
CREATE OR REPLACE TRIGGER "AFT_INS_CRM_CUSTOMER_CONTACTS"
AFTER INSERT ON FH_TAPROD.CRM_SALES_CUSTOMER_CONTACTS
FOR EACH ROW
DECLARE
custo_id NUMBER;
var_code varchar2(8);
cont_code varchar2(5);
BEGIN
SELECT CUSTOMER_ID INTO custo_id FROM CRM_SALES_CUSTOMER_CONTACTS WHERE ID =:NEW.ID;
select CODE into var_code from VENDOR_CUSTOMER_MAS where CRM_CUST_ID=custo_id ;
SELECT LPAD ( NVL(MAX(CONTACT_CODE), 0)+ 1, 5, '0') into cont_code FROM vendor_customer_contact
insert into VENDOR_CUSTOMER_CONTACT(SBU_CODE ,CODE,CONTACT_CODE, CONTACT_NAME ,PHONE_NO1 ,MOBILE_NO ,EMAIL, ADDRESS1,CUST_ID,UPLOAD_CRM)
   values('0002',var_code,cont_code,:NEW.CONTACT_NAME,:NEW.CONTACT_PHONE,:NEW.CONTACT_CELL,:NEW.CONTACT_EMAIL,:NEW.CONTACT_ADDRESS,custo_id,'CRM');
END;
CREATE TABLE "CRM_SALES_CUSTOMER_CONTACTS"
   (     "ID" NUMBER,
     "CUSTOMER_ID" NUMBER,
     "CONTACT_NAME" VARCHAR2(255),
     "CONTACT_EMAIL" VARCHAR2(255),
     "CONTACT_PHONE" VARCHAR2(255),
     "CONTACT_CELL" VARCHAR2(255),
     "CONTACT_ADDRESS" VARCHAR2(4000),
      PRIMARY KEY ("ID") ENABLE
INSERT INTO CRM_SALES_CUSTOMER_CONTACTS VALUES (204414862717175278810736770347803084847, 204232590877603599356756434170666837075, 'SANJAY',    '[email protected]', 1246456, 57152357,'Near Post Office');
CREATE OR REPLACE TRIGGER "BIU_CRM_SALES_CUST_CONTACTS"
BEFORE INSERT OR UPDATE ON CRM_SALES_CUSTOMER_CONTACTS
    FOR EACH ROW
begin
    if inserting and :new.id is null then
        select to_number(sys_guid(),'XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX') into :new.id from dual;
    end if;
    if inserting then
        :new.created_by := nvl(v('APP_USER'),USER);
        :new.created_on := sysdate;
    end if;
    if updating then
        :new.updated_by := nvl(v('APP_USER'),USER);
        :new.updated_on := sysdate;
    end if;
end;My After Insert TAble
CREATE TABLE "VENDOR_CUSTOMER_CONTACT"
   (     "SBU_CODE" VARCHAR2(4) NOT NULL ENABLE,
     "CODE" VARCHAR2(8) NOT NULL ENABLE,
     "CONTACT_CODE" VARCHAR2(5) NOT NULL ENABLE,
     "CONTACT_NAME" VARCHAR2(1000) NOT NULL ENABLE,
     "PHONE_NO1" VARCHAR2(100),
     "MOBILE_NO" VARCHAR2(25),
     "EMAIL" VARCHAR2(1000),
     "ADDRESS1" VARCHAR2(4000),
     "CUST_ID" NUMBER,
     "UPLOAD_CRM" VARCHAR2(10),
      CONSTRAINT "VCV_PK" PRIMARY KEY ("SBU_CODE", "CODE", "CONTACT_CODE") ENABLE
ORA-01400: cannot insert NULL into ("FH_TAPROD"."VENDOR_CUSTOMER_CONTACT"."CODE") ORA-06512: at "FH_TAPROD.AFT_INS_CRM_CUSTOMER_CONTACTS", line 30 ORA-04088: error during execution of trigger 'FH_TAPROD.AFT_INS_CRM_CUSTOMER_CONTACTS'How to resolve it.
Thanks
Edited by: 805629 on Jan 14, 2011 1:26 AM

This is your trigger
CREATE OR REPLACE TRIGGER "AFT_INS_CRM_CUSTOMER_CONTACTS"
AFTER INSERT ON FH_TAPROD.CRM_SALES_CUSTOMER_CONTACTS
FOR EACH ROW
DECLARE
custo_id NUMBER;
var_code varchar2(8);
cont_code varchar2(5);
BEGIN
SELECT CUSTOMER_ID INTO custo_id FROM CRM_SALES_CUSTOMER_CONTACTS WHERE ID =:NEW.ID;
select CODE into var_code from VENDOR_CUSTOMER_MAS where CRM_CUST_ID=custo_id ;
SELECT LPAD ( NVL(MAX(CONTACT_CODE), 0)+ 1, 5, '0') into cont_code FROM vendor_customer_contact;
insert into VENDOR_CUSTOMER_CONTACT(SBU_CODE ,CODE,CONTACT_CODE, CONTACT_NAME ,PHONE_NO1 ,MOBILE_NO ,EMAIL, ADDRESS1,CUST_ID,UPLOAD_CRM) values('0002',var_code,cont_code,:NEW.CONTACT_NAME,:NEW.CONTACT_PHONE,:NEW.CONTACT_CELL,:NEW.CONTACT_EMAIL,:NEW.CONTACT_ADDRESS,custo_id,'CRM');
END;This is the insert who fire it
INSERT INTO CRM_SALES_CUSTOMER_CONTACTS VALUES (204414862717175278810736770347803084847, 204232590877603599356756434170666837075, 'SANJAY',    '[email protected]', 1246456, 57152357,'Near Post Office');Then the trigger execute
SELECT CUSTOMER_ID FROM CRM_SALES_CUSTOMER_CONTACTS WHERE ID =204232590877603599356756434170666837075;
select CODE from VENDOR_CUSTOMER_MAS where CRM_CUST_ID=<result of previous query>;
SELECT LPAD ( NVL(MAX(CONTACT_CODE), 0)+ 1, 5, '0') FROM vendor_customer_contact;
Insert ...And fail.
Execute the select in your sqlplus one by one and post result.

Using Database Change Notification instead of After Insert Trigger

Hello guys! I have an after insert trigger that calls a procedure, which in turn is doing an update or insert on another table. Due to mutating table errors I declared the trigger and procedure as autonomously transactional. The problem is, that old values of my main tables are inserted into the subtable since the after insert/update trigger is fired before the commit.
My question is how can I solve that and how could I use the change notification package to call my procedure? I now that this notification is only started after a DML/DDL action has been commited on a table.
If you could show me how to carry out the following code with a Database Change Notification I'd be delighted. Furthermore I need to know if it suffices to set up this notification only once or for each client seperately?
Many thanks for your help and expertise!
Regards,
Sebastian
declare
cnumber number (6);
begin
select count(*) into cnumber from (
select case when (select date_datum
    from
      (select f.date_datum,
        row_number() over (order by f.objectid desc) rn
      from borki.fangzahlen f
      where lng_falle      = :new.lng_falle
      and int_fallennummer = :new.int_fallennummer
      and lng_schaedling   = :new.lng_schaedling
      and date_datum       > '31.03.2010'
    where rn=1) < (select date_datum
    from
      (select f.date_datum,
        row_number() over (order by f.objectid desc) rn
      from borki.fangzahlen f
      where lng_falle      = :new.lng_falle
      and int_fallennummer = :new.int_fallennummer
      and lng_schaedling   = :new.lng_schaedling
      and date_datum       > '31.03.2010'
    where rn=2) then 1 end as action from borki.fangzahlen
        where lng_falle      = :new.lng_falle
        and int_fallennummer = :new.int_fallennummer
        and lng_schaedling   = :new.lng_schaedling
        and date_datum       > '31.03.2010') where action = 1;
if cnumber != 0 then
delete from borki.tbl_test where lng_falle = :new.lng_falle
and int_fallennummer = :new.int_fallennummer
and lng_schaedling   = :new.lng_schaedling
and date_datum       > '31.03.2010';
commit;
pr_fangzahlen_tw_sync_sk(:new.lng_falle, :new.int_fallennummer, :new.lng_schaedling);

It looks like you have an error in line 37 of your code. Once you fix that the problem should be resolved.

Mutating table exception on trigger with After Insert but not with before

Hi
I need to maintain some constraint on the table to have only one row for values of the columns but not by primary key constraint.
Because in case of primary key the insert would fail and the rest of the operation would be discontinued, I cannot change in the somponent that inserts the row so I have to prevent that on the table I have.
I created a before insert trigger on the table which checks if any row exists in the table with same column values as the one being inserted. if found I delete the rows and let the insert happen (w/o raising any error). if the rows do not exist then the insert shall be continued.
I read at place that modifying the dame table in the trigger body shall raise a mutating table exception, but I donot get the exception when the trigger is fired.
Just when I change the trigger to after insert trigger then the nutating table exception is thrown.
Is it the right behavior i.e. the Before insert trigger does not raise the exception and only after insert does that, since I could not find the example for before insert triggers throwing such exception so I think it is better to confirm it before finalizing the implementation.
Thanks
Sapan

sapan wrote:
Hi Tubby
I cannot user unique constraint because that would raise an exception upon violation and the third party component that is inserting in the table would fail.
That component does some other tasks as well after this insert and if an exception is raised then those tasks would not be performed.
Also I cannot change the component to ignore this exception.Well then, you're in a bit of a pickle.
I'm guessing the trigger you have been working on isn't "safe". By that i mean that it doesn't account for multi-user scenarios. You'll need to serialize access to the data elements in question and implement some sort of locking mechanism to ensure that only 1 session can work with those values.
After you work out how to do that it sounds as though you would be better served using an INSTEAD OF trigger (you'd need to implement this on a view which is made off of your base table).
Here's one way you can work on serializing access to your table on a relatively fine grained level (as opposed to locking the entire table).
Re: possible to lock stored procedure so only one session may run it at a time?
Cheers,

How can i print reports to different printer by use Trigger on table after insert

Hello,
Please can any one tell me how can i print (any message) to different printer (network & local printer) by use Trigger on table after insert.
regards,
Linda.

What you want to do cannot be done with PL/SQL, which does have any print utilities. However you could write something using Java Stored Procedures.
Of course the "different printer" bit will have to be data driven as triggers are not interactive.
rgds, APC

After Insert Trigger with DML on the subject table?

I am trying to set up e-mail notifications, so I created a procedure, which accepts the argument of an id. In the procedure, it queries the table and sends out mail based on the result set. (in the trigger, I pass in the value of :NEW.id). The procedure then queries the table for that row id.
First, for the after update I was getting the error:
ORA-04091: table is mutating, trigger/function may not see it ORA-06512
So, I was advised to do in the declare block: pragma autonomous_transaction; I did that, and that solved the problem there. SO I did the same in the after insert trigger, but then I get the error:
ORA-00060: deadlock detected while waiting for resource ORA-06512
I asked our DBA and he said you are not able to query the table of which the trigger is a subject of. I thought it would be possible since its After insert or update?
Can anyone offer any suggestions ? :)
Thanks,
Trent

Any reason why it would work in an after update trigger then?
So, I was advised to do in the declare block: pragma autonomous_transaction; I did that, and that solved the problem therePRAGMA AUTONOMOUS_TRANSACTION "bends" the restriction against SQL against base table.
It is the equivalent to tap dancing across a mine field.
You might get the desired results most of the time or you might get a tasty surprise when you least expect it.
What happens to your application in the future, if/when the UPDATE has a ROLLBACK issued & PRAGMA AUTONOMOUS_TRANSACTION has successfully completed?
Inquiring minds would like to know the answer.

Error while firing a trigger After Insert

Dear All
I have created a Table named Punches in user Punch
and I have written a trigger after Insert on table Punches
In that Trigger i am wrting some select Command
and Insert command
tables are located in Other User
while firing the trigger it is showing Error.
pl help

Arbar Mehaboob - user553581 wrote:
Dear All
I have created a Table named Punches in user Punch
and I have written a trigger after Insert on table Punches
In that Trigger i am wrting some select Command
and Insert command
tables are located in Other User
while firing the trigger it is showing Error.
pl helpplease provide:
1) your database version
2) the table DDL's
3) some sample data
4) the trigger code
5) the error message you're getting.
without these, it is impossible to suggest an answer.

I create trigger but not display massage after insert in oracle 10g

I create trigger but not display massage after insert in oracle 10g
**CREATE OR REPLACE TRIGGER TableName**
**AFTER INSERT OR DELETE OR UPDATE ON test**
**BEGIN**
**if inserting then**
**dbms_output.put('Message');**
**end if;**
**END;**

What user interface are you using?
If the tool doesn't support the SQL*Plus syntax (set serveroutput on), it probably has an option somewhere to enable DBMS Output. Not even knowing what tool you're using, it's impossible for us to guess where that option might be configured.
As others have suggested, using DBMS Output to test code is less than ideal because you're dependent on the application you're using to display it to you and not every application can or will do that. If you want to use DBMS_Output, you may need to switch to a different GUI (SQL Developer or SQL*Plus are both free utilities from Oracle). Otherwise, you'd probably be better off having the trigger do something that you can subsequently query (i.e. write a row to a log table).
Justin

After insert trigger issue

Hi All,
Can I have an after insert trigger on a table wherein the execution is also on the same table?
It's like 10 columns in the table A.
During a new row insertion, except one specific column(say 'J'), remaining all getting data.
Now 'after insert', need to update the data of the column J based on one inserted value for column say ID.
Code goes like below:
CREATE OR REPLACE TRIGGER UPDATE_J
AFTER INSERT ON A REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
begin
if :new.ID = 'N%' then
     :new.J:= 'N';
else
     :new.J:= 'M';
end if;
end;
Below is the error when I tried to execute that.
ORA-04091: table string.string is mutating, trigger/function may not see it
Cause: A trigger (or a user defined plsql function that is referenced in this statement) attempted to look at (or modify) a table that was in the middle of being modified by the statement which fired it.
Action: Rewrite the trigger (or function) so it does not read that table.
Any idea to resolve?
Regards,
Seetharaman.

Hi,
The docs say
Restrictions on AFTER
      An AFTER row trigger or AFTER row section of a compound trigger can only read but not write into the :OLD or :NEW fields. When faced with problems like this, it is always a good thing to consult the documentation.
Regards
Peter

Fetch Insert / Update Query From Table Trigger

Hi everyone !,
I have a situation, is there any way where I can get insert/update query by before-insert / after insert trigger when a user inserts/updates any row in the table.
Plz....help me....champs.....
Regards,
Naushad

That was a nice thing but it works only on some oracle 9i with DML statements.
On database versions 9.2.0.1 to 9.2.0.6 ora_sql_text works and returns the calling text for dml triggers, where as starting from 9.2.0.7 the behavior has changed and returns NULL.
Cause
This issue had surfaced from 9.2.0.7.0 patchset. After discussions in Bug 4171597 which was closed as a duplicate of Bug 4230721 it was concluded that it was the expected behavior i.e ORA_SQL_TXT should return null when dml triggers are used.
ORA_SQL_TXT is a "System defined event attribute" and is supposed to work only with "System triggers". This is also what the Documentation says - "Application Developers Guide : Fundamentals(9.2)
Chapter 16 Working with System events".
Bye Alessandro

Custom Trigger After Insert

After a insert into table 1, i want to take a value from that transaction and use it in a custom trigger to instert into another datbase the 2 values. One is the primary key value of the transaction of table 1 and the other is a session variable of the logged in user. I can get the value of the session user, but i cant get the value of the transaction field.
$updateRequestDate = "INSERT INTO request_notify (id_request, username) Values({rsrequest.id_request}, '" . $_SESSION['kt_login_user'] . "')";
$update_result = $tNG->connection->execute($updateRequestDate);
if(!$update_result) {
$updateError = new tNG_error("Error setting the logged in status to N", array(), array());
return $updateError;
} else {
return NULL;
I have the custom trigger set to go after insert transaction.
How do you get the value of a transaction field for a custom trigger?

Gunter,
You rock. Working example, using your knowledge.
$updateRequestDate = "INSERT INTO test2 (idtest_note, username_note) VALUES ('". $tNG->getColumnValue("id_test") ."', '". $_SESSION['kt_login_user']."')";
$update_result = $tNG->connection->execute($updateRequestDate);
if(!$update_result) {
$updateError = new tNG_error("Error setting the logged in status to N", array(), array());
return $updateError;
} else {
return NULL;

How-To "Refresh a table of data after inserting or deleting"

I'd like to say a word on the how-to article "How to refresh a table of data after inserting or deleting a row using ADF".
(http://www.oracle.com/technology/products/jdev/howtos/1013/updtable/index.html?_template=/ocom/technology/content/print)
I spent a lot of time on it because I needed help in implementing simple CRUD functionality on a table, using JSF-ADF-TopLink technologies.
While the the article does provide correct steps, it is in one important place not specific enough, so the reader may easily get stuck. In section "Refresh the data table", point 1: when you double click on the removeEntity() button, in Structure window, then you do not get the required dialog. You get CommandButton Properties dialog.
You must click on the removeEntity() button in Editor's Design view. But even there you may get the CommandButton Properties dialog, not managed beans dialog.
You may resolve that by going to JSF configuration file, faces-config.xml, and switch to Overview view. This will show you the managed beans that you have.
Then, you may already have a backing bean for the page. You can use that and avoid creating a new managed bean.
I could understand what the operations mean only after very careful reading of "Creating More Complex Pages", section "Overriding Declarative Methods" in JDeveloper Help (or in ADF Developer's Guide PDF document).
In general: I believe that "ADF bindings" need more conceptual explanation, maybe in form of an article. Grammatical form "bindings" may create a false understanding that "bindings" are just references. But they are not -- ADF bindings are active objects that handle traffic between UI components and Data Controls. It seems that "bindings" even communicate among themselves. Maybe it would be more understandable to differentiate strictly between "binding objects" (or "binders"?), binding object definitions and binding object references.
It would be very helpful to have a diagram showing grahically what specific binder objects are created in a small apllication (2-3 pages using 1-2 tables), with whom they communicate and what type of data is passed on.
Priit

Hi
Thanks for your infos.
Yes exactly I use almost the same code you have post here.
Could You answer to my next questions?
First - >what do you mean by saying that "it's not good idea using refreshing in IE?" Of course I use refreshing in backing_bean for my button "remove" that removes row, commit changes to database and refresh table, almost the same as You said in your post:
Code in backing_bean is and comments on difference to Your code is below:
public commandButton2_action1(){
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("removeEntity");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
//above remove entity, but I dont now if it do commit to database? So i do it below
OperationBinding commit1 = bindings.getOperationBinding("Commit");
commit1.execute();
//and at the end I refresh my table, "findAllRezerwacja1 - it is an id of the methodAction, not the iterator -> is it ok? or should I change to Iterator id?
OperationBinding requery = bindings.getOperationBinding("findAllRezerwacja1");
requery.execute();
return null;
Page Definition code for this:
<methodAction id="findAllRezerwacja1"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="findAllRezerwacja"
RequiresUpdateModel="true" Action="999"
ReturnName="SessionEJBLocal.methodResults.SessionEJBLocal_dataProvider_findAllRezerwacja_result"/>
<table id="findAllRezerwacja2" IterBinding="findAllRezerwacja1Iter">
<AttrNames>
<Item Value="dataDo"/>
<Item Value="dataOd"/>
<Item Value="idRezerwacja"/>
<Item Value="liczbaUczestnikow"/>
<Item Value="prowadzacy"/>
<Item Value="uwagi"/>
</AttrNames>
</table>
<methodAction id="removeEntity" InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" MethodName="removeEntity"
RequiresUpdateModel="true" Action="999">
<NamedData NDName="entity"
NDValue="${bindings.findAllRezerwacja2.currentRow.dataProvider}"
NDType="java.lang.Object"/>
</methodAction>
<action id="Commit" IterBinding="findAllRezerwacja1Iter"
InstanceName="SessionEJBLocal.dataProvider"
DataControl="SessionEJBLocal" RequiresUpdateModel="true"
Action="2"/>
</bindings>
//and rest of code for Iterator etc
My second question is, why when you use refresh button in IE (I know is not recommended as You said, but sometimes user do it, so I want prevent situations that I will describe here) so when I press refresh button in IE exactly after removing one row by clicking my button, refreshing by pressing IE button is doing the same --> is deleting next row. How to stop deleting row, when for example user would press IE refresh button after pressing remove button for table. If I change selection in table after deleting row, and press refresh button in IE, instead of deleting row, I got error message: JBO-29000: JBO-35007: and
JBO-35007. So where Im doing wrong. Maybe I should do sth with postback ? Could You help me? Thanks in advance
Last one question: what is the difference between using delete and removeEntity from operations node? Im now reading carefully ADF Dev Guide, so I hope I can find infos there? But if You know, please answer to this question.
Thanks

"creta user" in an "after insert" table trigger

Similar Messages

Maybe you are looking for