Crm abap Changing partner of equipment

Hi,
I am new to crm and i need to change equipment master data.
How can i change the partner numbers of sold to and ship to on equipment with abap.
Thank you

Hi,
I am not sure about the tcodes. I am using crm_ui tcode and there i will go to customer & products -> equipments
There i can change partners. I need to do it via abap.
Thank you for your time.

Similar Messages

  • In CRM relationship appends the Changed partner function in R/3 -Middleware

    Hi Experts,
    Partner functions in R/3 are mapped as relationship categories in CRM and the transfer is happening through middleware.
    However if I change the BP for an existing partner function in R/3, it is not changing the BP in corresponding relationship in CRM.Instead it is adding a new relationship category.
    Currently we are in CRM2007(6.0 version).
    Ex.
    - An account in R/3 has a partner function "Sold to Party" as BP Id "01234". This does create a relationship category in CRM "has sold to party" with BP Id 01234. -- it is working fine.
    - Later if I "change" the BP id 01234 to a new BP Id "05678" in R/3 for Sold to Party partner function, it does not update the relationship category in CRM. Instead it adds a new relationship category for "Sold to Party" with BP Id 05678.  This is issue now.
    We dont want to create a new relationship, instead we would like to update the relationship for new BP Id.
    If anyone has any any clue how to resolve this, please share your thoughts. It is a very critical requirement.
    Appreciate your help on this.
    appends relationship in CRM
    Regards,
    Srini

    Hi Shourav,
    Thanks for your reaply. I agree with you for the general scenario. But my question is littlebit different what you understand.
    I try to explain little bit detail this time.. Hope you undrstood my issue.
    We are facing issue in partner relationship deletion  functionality from ECC to CRM.
    Issue: Partner functions in R/3 are mapped as relationship categories in CRM and the transfer is happening through middleware.
    However if I change the BP for an existing partner function in R/3, it is not changing the BP in corresponding relationship in CRM. Instead it is adding a new relationship category.
    Ex.
    - An account in R/3 has a partner function "Sold to Party" as BP Id "01234" and a partner function relationship as ship to party with BP id  u201C05678u201D  and it is replicating this relationship correctly in CRM .
    - Later if I "change" the BP id 05678 to a new BP Id "05679" in R/3 for Sold to Party partner function, it does not update the relationship category in CRM. Instead it adds a new relationship category for "Sold to Party" with BP Id 05679. This is issue now.
    Any notes or work around solution for this issue is helpfull.
    Regards,
    Srini

  • CRM Sales Offer: Change Partner Address.

    Hi gurus,
    I need to change a partner address from a CRM sales offer. I'm using FM's CRM_ORDER_READ in order to get all order data.
    I don't understand very well the use of CRM_ORDER_MAINTAIN and CRM_ORDER_SAVE.
    Can anybody help me?
    Thanks a lot!

    Hi,
    It's right to use FM CRM_ORDER_READ to retrieve data but you will not maintain partner address data using CRM_ORDER_MAINTAIN.
    You can change partner Address using FM BAPI_BUPA_ADDRESS_CHANGE.
    Best regards,
    Caíque Escaler
    Edited by: Caíque Escaler on Dec 2, 2010 6:11 PM

  • Reg:Function module SAPWL_GET_SUMMARY_STATISTIC not working in CRM ABAP 6.0

    Hi All,
      When i execute the function module SAPWL_GET_SUMMARY_STATISTIC in CRM ABAP 6.0 passing the values below,
    PERIODTYPE                    
    HOSTID                         
    STARTDATE  
    it's not showing any values in the summary.
    it's showing the exporting parameters as,
    RFC_ERROR_TYPE                  L
    SUMMARY_AVAILABLE               N
    HITLISTS_N_PROFILES_AVAILABLE   A
    if this function module will not work means kindly provide me the solution for calculating
    Average Response Time as in tcode st03 - Instance - total - Workload Overview.
    Average CPU Time and some more fileds.
    Regards,
    Suresh

    Hi
    I used the FM mentioned and found the details as below:
    VKORG
    TABNAME                        TVKO
    FIELDNAME                      VKORG
    LANGU                          EN
    POSITION                       0001
    OFFSET                         000006
    DOMNAME                     VKORG
    ROLLNAME                    VKORG
    CHECKTABLE
    VTEXT
    TABNAME                        TVKOT
    FIELDNAME                      VTEXT
    LANGU                          EN
    POSITION                       0002
    OFFSET                         000014
    DOMNAME                        TEXT20
    ROLLNAME                       VTXTK
    CHECKTABLE
    LENG                           000020
    Shiva

  • CRM ABAP Development aproach

    Hi Experts,
    Can any body tell me the difference in the approachs of development between CRM ABAP and ABAP.
    or only the CRM ABAP development approach.
    jaffer vali shaik

    Hi,
    As far as ABAP is concerned, its same in R/3 and in CRM. But in CRM, its more oriented towards OOABAP. For example, BADI, Model access class of PCUI all are oriented towards OOABAP.
    Regards,
    Karthik.

  • Web Services of SAP CRM ABAP 7.0 not show up

    Hello Experts,
    We are testing SAP CRM 7.0.
    In T-cd:sproxy in CRM system, the Software Component Version SAP CRM ABAP 7.0 doesn't show up.
    We'd like to see the web service definitions for CRM Service Processing,
    but can't find them such as "ServiceOrderCRMCreateRequestConfirmation_In"(described in ES Workplace)
    to create Service Order in T-cd:sproxy nor T-cd:SE80 Repository Information System>Enterprise Services>Service Definitions.
    (We found the web service definitions of SAP CRM ABAP 5.1 there, but not SAP CRM ABAP 7.0)
    The support package versions are as follows:
    - SAP_ABA : SAPKA70106
    - SAP_BASIS :  SAPKB70106
    - PI_BASIS : SAPK-70106INPIBASIS
    - BBPCRM : SAPKU70006
    Could you please advise us what's required to find Web Services SAP CRM ABAP 7.0?
    Thank you in advance for your help.
    Best regards,
    F.T.

    Hi,
    You need to download SWCV "SAP CRM ABAP 7.0" in your CRM system from service market place. Also download PI content for SWCV: "SAP CRM ABAP 7.0" and import them in ESR.
    Regards,
    Gourav
    PS: Similar questions are answered several time on this forum, so please do search before posting.
    Edited by: Gourav Khare on Dec 13, 2010 11:56 AM

  • When transferring HR data from ECC to CRM via change pointers

    When transferring HR data from ECC to CRM via change pointers ,certain data is getting earsed in CRM
    paricularly the last name and first name of BUT000
    Do you have any idea why this could be happening
    Thanks in advance

    Hi Kittu,
    Change pointers. Change pointers are R/3 objects that mark changes to SAP master data. Change pointers are managed by mechanisms in a Shared Master Data (SMD) tool and are based on Change Document (CD) objects. CD objects record the changes occurring to master data at a field level. These changes are stored in tables CDHDR (header table) and CDPOS (detail table). ALE configuration provides a link between CD objects and change pointers. Internal mechanisms update tables BDCP and BDCPS, which host the change pointers. While CD objects are application-data-specific, the processing status of change pointers is message-type-specific. Also, the ALE change pointers are activated first at a general level and then at the message-type level.
    use this links kittu.
    http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0f/9d563cf19bcb43e10000000a11405a/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ab/27bde462848440ba70cf8eb348c86f/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/12/83e03c19758e71e10000000a114084/frameset.htm
    Creating a change pointer and subsequently triggering an IDOC
    thanks
    karthik

  • Having multiple J2EE stacks connected to one CRM ABAP instance for CRM IPC

    Hello Experts,
    The situation we were looking at is this.
    We have 3 distinct teams doing Java development for CRM IPC configurators
    Team A - IPC/Ecommerce
    Team B - UI
    Team C - Order Wrapper
    They each wanted to do development in their own landscape (Java Stack)
    Additionally, two more landscapes are needed:
    a landscape for end 2 end testing of the configuration scenarios
    another for a Performance Assessment
    To get 5 full dual stack CRM instances was deemed unlikely.
    Trying to explore if multiple J2EE's, can be connected to one CRM ABAP system.
    It seems we can not, as the CRM ABAP to JEE comminucation is via RFC and there is excatly one RFC_Destination defined per CRM (across all clients). Is this correct?
    Thanks
    Rocky

    May be you can wordsmith your requirement to make it clear what each team is doing. Also, please mention what version of CRM / IPC you are talking about.
    From what you have said, I guess IPC/E-Commerce is E-Commerce enhancement. If NWDI is in the picture, you have one track for this enhancement.
    The UI - I assume is IPC UI. This is also a Java based web application that shares the same Java stack with the E-Commerce application.
    What is Order Wrapper? - If it a custom web application you guys are into, I still don't see why they can't use the same Java "stack".
    In the development lifecycle, it is sufficient to have only one IPC environment for each phase. The development team needs only one, unless they have a valid reason to have their own Java stack. I bet they need only one.
    If the developers are asking about "Sandbox", they can have their own NetWeaver Developer Workplace in their laptop / desktop.
    Easwar Ram
    http://www.parxlns.com

  • Configure, Test, and Consume an Enterprise Service in SAP CRM ABAP 6.0

    Hi all,
              Can anyone provide me any document on how to Configure, Test, and Consume an Enterprise Service in SAP CRM ABAP 6.0 (2007) ???

    Hi,
    there are tons of documents about consuming and producing web services. This question has been also asked on this forum many times. Check for example section eLearning. There are couple of tutorials related to web services. I would start with SAP documentation. The web services are capability of NetWeaver so it does not matter if you have CRM or ERP system. The tools are same.
    Cheers

  • CRM (Abap + Java) connect with WAS (Abap + Java)

    Hello collegues,
    i have installed Netweaver 7.0 with Enterprise Portal.
    Now i must connect
    WAS with CRM system, but i do not what i have to connect ABAP - ABAP parts (RFC connection type TCP) or Java - Java parts (in visual admin in JCo) or ABAP - Java ( no idea how)? Which users are using for?
    The second task -
    i have tryed to create some user in portal but got message "error in persistence"?
    In useradmin in EP i saw that standart users from R/3 Abap are there. May be i fogot to set something after installation?
    Thank you very much for any idea.
    Julia

    Hi Julia,
    for CRM you don't need to "connect" the Portal (Java) with the CRM (ABAP) system.
    It is "just":
    - import of the CRM Business Package
    - definition of a system in the portal pointing to the CRM
    - setup of SSO (if you want SSO)
    The error with the persistance:
    You already have connected the Java UME to the ABAP system. In the ABAP you have a user called "SAPJSF" - this user has only read permission on the users. You have to assign another role to that user: SAP_BC_JSF_COMMUNICATION instead of SAP_BC_JSF_COMMUNICATION_RO
    Hth,
    Michael

  • Changing partner profiles

    Hi All,
    Can someone tell me how to change partner profiles?

    Hi
    Use the TCode WE20 to change Partner profile
    http://help.sap.com/saphelp_sm32/helpdata/en/72/91ef3b06870a49e10000000a114084/content.htm
    Regards
      -Vinod
    Reward if found helpful.

  • Suggest me the best training institute for SAP CRM ABAP / CRM Technical

    Dear all,
    Kindly suggest me that, which training institute in India is providing training course specially on SAP CRM ABAP course.
    I am happy if any SAP CRM Technical expert willing to train me directly. I have good functional experience on CRM module and planning to be trained on technical part.
    Your recommendations will be highly appreciated.
    best regards
    Raghu ram

    user12483593 wrote:
    hi,
    i am looking for good training institution in india to learn oracle dba
    so pls can any one suggest me which institute providing the best training for this course
    thank you in advanceThe best training is probably by Oracle University
    Goto [http://www.oracle.com/education] - choose Product Courses, Database and Grids:
    (eg [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=14&p_org_id=1080544&lang=US])
    In both cases ensure country selected on top right is India.
    On the schedule choose courses with +100% Student Satisfaction+
    It is hard, (though obviosly not impossible), for other institutions to better this standard of such courses.
    If you are aspiring to Oracle DBA OCP be very sure the institute you are choosing satisifies the requirements for the Hands on Course, and do not take the institutes word for it but check.
    It may well be that you are looking for institutions offering the WDP programme. This is a maximm of 6 hours/week over several weeks so IMHO is impractical if you do not live nearby. There appear to be comments that sometimes the training from these institutes doing the WDP course can be of very variable quality. Probably the only option here is to seek out the opinions of recent psat students you can trust.

  • CRM Extractor change

    CRM Extractor change
    I need to redirect one Transaction Type into a different BW Queue.
    I have the transaction type ZZ01 which is extracted by one extractor. The changes are written into the delta queue.
    I need however to extract the ZZ01 with different extractor. Different queue.
    The transaction type ZZ01 is a transaction category BUS2000112
    I have changed the extractor in BWA1. I have added the line
    ORDERADM_H PROCESS_TYPE I EQ ZZ01
    Now the selection looks like this
    ORDERADM_H OBJECT_TYPE I EQ BUS2000112
    ORDERADM_I OBJECT_TYPE I EQ BUS2000147
    ORDERADM_H PROCESS_TYPE I EQ ZZ01
    But the changes have no effect. When I change the any transaction type ZZ01 it is still written into the 'old' queue.
    System CRM 5.0
    I did reinitialize both extractors.
    Thanks for any hints
    Martin

    no solved

  • Manually changed partner information

    Dear all,
    if you manually change the partner address in SD documents, in VBPA you get the "E" in field ADRDA.
    Also in ADRC an new adress number is created. But where can I get the userid which is responsible for the change?
    Is there a field ERNAM for new ADRC entries or something else?
    Thanks for you help and best regards
    Jochen

    Dear Shiva,
    thanks for your answer, unfortunatelly you can only find changes in the sales order in a "high level" way which you can also see in VA03 under "Changes". The manually change of the partner is not monitored.
    For every manually changed partner a new entriy in table ADRC is created. Do you know if there is something like ERNAM in some subtable of ADRC?
    Thanks and best regards
    Jochen

  • Middleware: Changed partner function in R/3, appends relationship in CRM

    Hi Group
    Partner functions in R/3 are mapped as relationship categories in CRM and the transfer is happening through middleware.
    However if I change the BP for an existing partner function in R/3, it is not changing the BP in corresponding relationship in CRM.Instead it is adding a new relationship category.
    Ex.
    - An account in R/3 has a partner function "Sold to Party" as  BP Id "1234". This does create a relationship category in CRM "has sold to party" with BP Id 124.    -- Works fine. No issues.-
    - Later if I "change" the BP id 1234 to a new BP Id "5678" in R/3 for Sold to Party partner function, it does not update the relationship category in CRM. Instead it adds a new relationship category for "Sold to Party" with BP Id 5678.   ISSUE.
    We dont want to create a new relationship, instead we would like to update the relationship for new BP Id.
    If anyone has any any clue how to resolve this, please share your thoughts. It is a very critical requirement.
    Answer will be suitably rewarded with points.
    Thanks & Regards
    Vishal Mani

    Hi Michael,
    Thanks for asking . This Dinesh ( Vishal's colleague ) ..We found that the Dumps are because of the implmentation of the SAP Note 497146 which provides a enhancement to the existing FM BUPA_MWX_BDOC_MAP_REL_CENTRAL . This is throwing the short dump.
    We raised a OSS message and SAP replied back saying the behivour of the sytsem is as per standard and its not a bug .
    Can you please us to achive the following !!
    We want to avoid the replication of BP relationship ( sold to party to Z Custom A/c group  ) which does not have a Sales area ? Do  you know a BADI which can help us to achive this functionility ??
    I mean we want a control of the BP releationship replication via Middleware using BADI  .. Can you please help us here . Also please provide any list of BADIs which can help us on this ?
    Please get back at the earliiest , as we have a Go-live tommorow .
    Thanks and Regards
    Dinesh

Maybe you are looking for