CRM BP Migration - telephone and Fax data not posted

Hello Experts,
I am having an issue while posting a Contact using IDoc in CRM 7.0, the contact is created, all data is ok, email is posted, but fax and telephone information is not posted.
Have anyone faced this issue and now how to solve this?
Thanks!

Hi Nhlanhla,
  You can achieve this by IDOCS or XIF Function Modules.
   Preferred is develop a program using CRMXIF_PARTNER_SAVE and CRMXIF_PARTNER_REL_SAVE for better performance. Here you will find Z fields create through EEWB also.
  For IDOCs
Message Type         CRMXIF_PARTNER_SAVE_M
Basic Type           CRMXIF_PARTNER_SAVE_M03
Message Type         CRMXIF_PARTNER_REL_SAVE_M
Basic Type           CRMXIF_PARTNER_REL_SAVE_M02
Regards,
Bhanu

Similar Messages

  • Maintain the telephone and fax number of vendor in Purchase order document

    Dear Expert,
    Hi, i'm wondering here.. why when I create purchase order , and enter the vendor in vendor field, the telephone and fax field in PO header - address tab is not automatically appears, only the street/ house number , postal code and so forth appear?
    I have checked in vendor master, all the communication info are maintained (telephone, fax, email)
    You can give me any idea about this?
    Thanks
    Pauline

    Hi Nick,
    Do you mean the Purchasing Organisation comms  in the vendor master data ? Yes I have maintained.
    actually the field in vendor master and the field in purchase order have the same name SZA1_D0100-TEL_NUMBER why it is not link to each other?
    Thanks
    Pauline

  • I backed up my iphone via icloud and restored it and lost dates notes photos anyone help

    i backed up my iphone via icloud and restored it and lost dates notes photos anyone help

    i backed it up to icloud and pc. but when i went to restore i got sum contacts back but not the latiest contacts. and no photos and notes gone. but i did notice that that bk up date was changing is there anyway i can look at all the back ups ????

  • Problem in Background Job. Job Completed Successfully but data not Posted

    Hi All,
    There is a problem in Background Job in Production server (600).
    The job completed successfully but data not posted.
    The same Job was working perfectly till the starting of the May month.
    but now it is not working and rebate has not been posted.
    Where to check and what to check
    Pls suggest.
    Regards,
    P Kamal

    Hi ,
    Please first check the status of the Job , ifs successfully completed then debug it (tcode JDBG) and 
    check out,  whether the values passed (might be using Import-export ,set-get parameter Ids) to the Job are getting passed properly or not. These values might not be getting passed properly.
    If it has some error in Job Log then let me know the error.
    Regards,
    Uma

  • How to use ale/idocs in sap crm to transfer master and transactional data

    hi all,
    I am working on sap crm7.0 ehp1. I want to transfer my master and transactional data from crm development system to crm quality system here through idocs. I am aware of basic ale settings and successfully transfe the ztable data through idocs. But i am not able to find any proper step by step procedure for maste and transactional data in sap crm. Also sap ecc tcode NACE is not available here.
    pls help..
    regards,
    kavita chaudhary

    Kavita,
    In CRM, Exchange Interface (XIF) ALE/IDOC is available to transfer master and transaction data. You can go through the following link for set up.
    Basic Data exchange set up for ALE IDocs - Wiki - SCN Wiki
    You can extend the standard XIF IDOCs using Transaction BDFg as well.
    Thanks,
    Ravi

  • Reg Telephone and Fax Number updation in Purchase orders

    Hi Experts,
    I need small information about Telephone Number and Fax numbers updation in Purchase Orders.
    Actually my user requirement is they have been provided the Purchase Organizations XXXX,XXXX.
    From this Two Purchase Orgs the users who are all created the POs the Telephone Number,Fax Number need to pick from the relvant User Master(user profile SU01).
    For this how i can discuss with my Abaper.
    If you have any idea on this please suggest me.
    Brgds,
    RK

    Hi RK
    Where do you need to update this information in the PO or the PO output ( Print / Fax / email)
    If you want to update these in the PO  then you need to use the customer exit.
    Enhancement        MM06E005 - Customer fields in purchasing document
    If you need to determine the details in the PO output then the smartform / script  being used needs to be modified to determine the data of the user derived from table EKKO - ERNAM  created by
    The address number needs to determined from table USR21 using the user ID  - PO created by( EKKO - ERNAM_ and using the address number derive the telephone number and fax number from table ADRC.

  • Fields "Completed" and "Completed Date" not available in Activity WSDL

    Hello All,
    We dont find the fields "Completed" and "Completed Date'" in Generic / Custom WSDL provided by OnDemand
    Any idea on the reasons? Any suggestions / workaround to query the above fields using Webservices?
    We tried guessing the integration tags as "Completed" and "CompletedDate" but it throws error
    Thanks for your help
    Regards,
    Venkatesan
    CRMIT

    I'm trying to WebService a large amount of activities from another system that we are converting to OnDemand. I would also like to update the completed date to match the date from the original system. I cannot find anyway to do this either.
    Has anybody else?
    I understand why they might not want you to update it via the UI, but via a WS it should be available. UGH !!!
    Thanks ...

  • Chain and store data not populating properly in BPARTNER

    Hi all,
    There is a field 0bpartner2 in the data source name 0BP_RELATIONS_ATTR. This field is also there in DSO1 which fetches the data from the mentioned datasource. Then using routines this field 0bpartner2 splits into two-->chain and store which are getting populated in the next level of DSO, DSO2 which finally goes into 0bpartner infoobject.
    But for two particular bp nos the values of chain and store are not getting populated.
    Checked in RSA3, the data is OK, but in the PSA level the data is not there.
    This is happening only for this two particular bp nos.
    Kindly help.

    Hi,
    at info package data selection don't have selection please check the below options.
    1. go to ECC -> enter the t code- RSA5 -> select the data source -> go to change mode -> select the check boxes possibility.
    2. if not there come to BI system select the data source go to change mode -> select selection menu -> browse and choose the X- selection possible.
    now it available selections at info package - while seeing the RSA3 data give the selection at info package
    Thanks,
    Phani.

  • Dateofbirth and start date not same for infotype 2

    Hi Gurus,
    Recently we have applied supportpacks for 4.6c  in development.I am testing for hiring action.What i observed is end date for these infotypes changed to 31.12.1999 instead of 12.31.1999 and in infotype 2 employee dateofbirth  and start date is not same which is suppose to be same.Startdate of infotype 2 is taken as employee hire date.Infotype 2 has timeconstraint 1.when i am trying to enter  date of birth, for some dates it give me an error invalid date. what could be the cause?Help is appreciated
    Thanks

    Hi,
    Please go to SU3 and check for the Date Format under the Defaults tab.
    Hope this helps,
    Reward points if helpful,
    Thank You,

  • File Server Migration Source and Target Data Validation

    Does anyone know of a power shell script/CLI command  or some other way to verify source and target data after a file server migration?  I want to make sure that the shares that are migrated from the source and target are an exact match. Thank
    you.

    Hi,
    An example is provided in this article:
    http://blogs.technet.com/b/heyscriptingguy/archive/2011/10/08/easily-compare-two-folders-by-using-powershell.aspx
    $fso = Get-ChildItem -Recurse -path C:\fso
    $fsoBU = Get-ChildItem -Recurse -path C:\fso_BackUp
    Compare-Object -ReferenceObject $fso -DifferenceObject $fsoBU
    And actually Robocopy could also do this job with /L and /log:file parameter. 
    If you have any feedback on our support, please send to [email protected]

  • Timescaledata Start Date and Finish Date not both inclusive

    From testing a bit with Time Scale Values in Visual Basic I noticed that when specifying Start and Finish dates for accessing Time Scale Data those dates were not both inclusive. The fact is that specifying a Start Date for Time Scale values will return
    data for which dates are greater or equal to the Start Date Specified but when also specifying a Finish Date the Time Scale values returned are only the ones that are less than the Finish Date specified not the ones less or equal as one would expect since
    the Start date is Incllusive. This is true for actual work with Microsoft Project 2007 and 2013 unsing Visual studio 2013. Has anyone experienced such a behavior? Is this a intended Behavior? Please see following code snippet       

    Jaques,
    In my example, the ass.start and ass.finish are the start and finish dates respectively of the assignment. Since the resource is assigned full time for the whole duration of the task, the assignment start and finish are the same as the task start and finish,
    namely, Dec 1, 2014 and Dec 7, 2014. If you only want data for specific days, say Dec 4, 2014 and Dec 5, 2014, then the syntax would be:
    Set TSV = ass.TimeScaleData("12/4/14", "12/5/14", pjAssignmentTimescaledWork, pjTimescaleDays)
    The result will be 7h and 8h respectively.
    If you want to print out the date along with the hours for each day in the Immediate Window, the following modification to the macro will do that:
    Sub testtimescale()
    Dim ass As Assignment
    Dim TSV As TimeScaleValues
    Dim val As TimeScaleValue
    Dim i As Integer
    Dim Da As Date, St As Date, Fi As Date
    For Each ass In ActiveProject.Tasks(1).Resources(1).Assignments
        St = ass.Start: Fi = ass.Finish
        Set TSV = ass.TimeScaleData(St, Fi, _
            pjAssignmentTimescaledWork, pjTimescaleDays)
            Da = DateValue(St)
        For Each val In TSV
            Debug.Print Da & " " & val / 60 & " hours"
            Da = DateValue(Da + 1)
        Next val
    Next ass
    End Sub
    John

  • Migration Assistant and Adobe License Not working

    I used migration assistant and my adobe cs3 license is not valid. Adobe had me delete a file and download their license recovery tool. When I launch it a non functioning terminal window comes up. I was told the user ID and password would be the next thing I saw. Any suggestions?

    I believe Migration Assistant was upgraded for Lion early in the week.  Do you have the latest?  Should be Version 4.
    Look here http://support.apple.com/kb/DL1420
    Phil
    Message was edited by: w7ox

  • Migrating Calendar and Contact Data from a PC to a Mac

    When converting from PC to Mac, can calendar and contact data exported to a .PST file be opened in directly, successfully in the Outlook 2011 for the Mac?
    Can anyone advise on how to export calendar and contact data from the PC, such that it can be opened or imported into iCal and Address Book respectively?
    Many thanks.

    can calendar and contact data exported to a .PST file be opened in directly, successfully in the Outlook 2011 for the Mac?
    Better ask on Microsoft's own forums for their Mac software:  http://www.officeformac.com/productforums

  • Calling a new browser window with WD Abap and passing data via POST

    Hi there,
    does anybody know whether passing data via POST method is possible when opening a new browser window from within a Web Dynpro Component? In my case I use method IF_WD_WINDOW_MANAGER->CREATE_EXTERNAL_WINDOW for opening a new browser window. Now I want to pass a big amount of data which is only possible via POST method. How can I achieve that or is it not considered inside the Web Dynpro Framework?
    Kind regards,
    Albert

    Hi Priya,
    can you please explain a little bit more what you mean? I didn't get it..
    Kind regards,
    Albert

  • Secondary cost element actual data not posted

    Hi Gurus,
    Actually we are posting the actual cost elements data into particular cost cenetr through batch job.upto 12/31/2009 the actual data is showing for the particular secondary cost element(overheads).Only after 01/01/2010 the actual data is not posted for this particular cost element inthat particular cost center.For the remining cost elements into that particular cost cnetr the actual data is posted thru batch job.We checked that particularsecondary cost element,the validity period is upto 31/12/9999.Suggest on this one.
    Thanks in advance
    Jana

    Hi,
    Did you execute overhead allocation processes as from 01/01?
    Regards,
    Eli

Maybe you are looking for