CRM Communication structure not working in a copy client

Hi all,
my issue is the following. In client 300 CRM, defined as copy of client 100 communication structure CRMT_ACS_I_COM  is not filled by implementation of BADI CRM_COND_COM_BADI .
Basically it is supposed that once you fill manually a field contained in a  Z TAB, at item level, by marking the tax type,  condition type in pricing procedure is filled automatically.
Now the point is, that in my client 100 of CRM this process works perfectly. Clients 100 and 300 are in the same machine.
Since customizing tables are the same, BADis used are the same (the code), what is falling?
Many thks in advance,
AndreA,
Ps: contributions will be rewarded

Hi Johannes,
I know it not recommended to set up two clients in the same machine, but unfortunately I did not have choice at time as it was imposed.
As well it true they share the same instance.
In any case I would say that in Quality we have the same clients and we haven't got any problems.
But one is kept just for getting historical data, meant CRM100, meanwhile CRM300 is the real production.
Both have an active middleware connection but just 300 is receiving and giving data to ERP, meanwhile R/3 as well is just kept for checking.
So I think the issue is elsewhere, otherwise quality system would fail as well.
In any case many tks in advance,
AndreA

Similar Messages

  • PCI Simple Communications Controller not working

    PCI Simple Communications Controller not working on hp pavilliong6-1003tx

    Hi
    Download, save & install --
    Windows 7:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-94322-2&cc=in&dlc=en&lc=en&...
    Restart system after installation.
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • CRM Availability Check not working for certain Item Category

    Hi there,
    I have a situation where for certain order type/item category combinations, the availability check on the same material is not working.
    The check is set up to happen in SAP ECC.
    I have checked the config. under SPRO->CRM->Basic Functions->Availability Check->Availability Check using SAP ECC
    as per many SDN posts on this, and everything looks fine.
    The new item category, which was a copy of an existing one, works (i.e. gives availability) for certain order types, but not others.
    If I create the same order directly in ECC, it works correctly every time.
    I searched the code (from consultants who set it up originally) and can see nothing specific to the order type/ item category.
    I also put a breakpoint on AVAILABILTY_CHECK function module in SAP ECC - it is not being hit, in the case where check is not successful.
    Breakpoints in MV45AFZZ (Sales Order userexit) also not being hit, but they are hit for the Order/item category combination when it works successfully.
    Any suggestions on where else this could be configured would be appreciated!
    thanks,
    David

    Hi David,
    One 'simple' reason for this could be that the copied item category does not have the
    ATP Profile set up in the item category in the IMG. Make sure you have an ATP profile assigned in the area 'ATP Profile' in the item category.
    Please see as well the SCN Wiki link:
    Availability Check CRM-BTX-BF-ATP - CRM - SCN Wiki
    Best regards
    Christophe

  • SSO to R3 not working after system copy

    Hi Experts,
    Recently our QA R3 client XXX was deleted and the whole system was rebuild using system copy of client ZZZ of R3 production. Now we had to reconfigure the SSO between portal and QA R3 with the new client.
    But it is not working. It was found that the QA R3's own self signed certificate shows CN=ERP (same as R3 Prod) and not ERU as it should have been. We changed the CN value to ERP,in Visual Admin (Services ->key storage , Ticket ). Still the result is same.
    How to re-generate the self signed certificate in R3 with CN=ERU ?
    or a workaround for this problem.
    Regards
    Jimmy

    HI Jayendra 
    Recreate the saplogonticketkeypair following the procedure outlined here
    http://help.sap.com/saphelp_nw70/helpdata/en/75/c80b424c6cc717e10000000a155106/content.htm
    Then you can export the SAPLogonticketkeypair-cert (public key certificate) of the Java AS and import it into the target ABAP system
    Important: the following two steps must be done in the ABAP client that will receive the logon tickets i.e the ABAP client that the component/application on the Java AS is configured to connect to e.g the client specified in the portal iview properties or the client specified in a Web Dynpro JCo Destination
    (1) Import the public-key certificate of the Java AS into the ABAP systems certificate list using transaction STRUSTSSO2
    (2) Add the certificate to access control list
    When adding the certificate to the ACL the SID should be set to the SID of the ticket issuing Java AS and the client should be set to the client that the Java AS is writing to the logon tickets i.e the value of login.ticket_client in the Java AS
    Remember, in an Add-In installation, where the system IDs are the same, you must change the default client for the J2EE Engine (000) to a client that does not exist on the SAP Web AS ABAP system e.g change login.ticket_client to 999
    See: http://help.sap.com/saphelp_nw70/helpdata/en/cb/ac3d41a5a9ef23e10000000a155106/content.htm
    The reason for this change is that the system ID and client combination must be unique when tickets are to be accepted by an SAP Web AS ABAP system
    By the way it is better to start a new thread with your question rather than bumping a thread that was already set to 'answered'

  • Service order on CRM application is not working fine

    1. We have recently moved from 8.48.16 to 8.51.15 on CRM 8.8 .
    2. One of the deleivered feature on CRMUPG is not working. Navigation is as given below.
    a) http://mstn-v-iscdev2/psp/CRMUPG/?cmd=login
    b) click on " service order " on left hand side.
    c) Enter service order id (2000136) in Service Order id.
    d) click on " Insert IOP Facilities " in requested facilities section.
    e) After clicking CSOS link in facilities column on IOP Facility pane.
    The CSOS data is not reflecting in requested Facilities section.
    Plz check the issue and help the earliest.
    Details :- IE 8
    In Another environment,when i click on CSOS.
    I can see javascript:submitAction_win0(document.win0,'MSI_FACILITYNAM$0'); in below panel.
    while in the environment where i am facing issue show
    javascript:hAction_win0(document.win0,'MSI_FACILITYNAM$0', 0, 0, 'CSOS', false, true);

    Hi,
      How have you defined the property "WAS host" for the portal system that you have created for the back-end?
    You might get this error if the way you have defined this WAS host property and the way you are calling the portal are different. For example, if your WAS host property is "<hostname>:<portnumber>" and you are calling your portal as "localhost:<portnumber>", then you will get this error.
      Also are you connecting to your portal using the fully qualified domain name? Don't call the portal simply as
    <i>http://<host>:<port>/irj</i> but call it as http://<host>.<domain>:<port>/irj.
    Regards,
    Satyajit.

  • Communication channel not working -- No Adapter Registered for this channel

    Hi Experts,
    I see the status of one of my Communication Channels (In RWB Communication Channel Monitoring) as
    "No Adapter Registered for this channel".
    I saw one of the threads related to this but could not fins a suitable reason for it as our issue seems to be different here.
    We have recently deployed the SFTP adapter and PI team is testing this communication channel and they got this error.
    I checked and found that SFTP adapter (in the JAVA EE applications) was not working and when I tried to start ,its giving error
    failed to start.
    additional status message as
    Status Details: Cannot load class "com.advantco.pi.af.adapter.sftp.SPIManagedConnectionFactory". Possible reasons: 1) class file cannot be found in the JARs located in the RAR file,
    2) class file cannot be found in referenced loaders,
    3) failed to initialize some static block(due to unhandled exception),
    4) failed to load or there is incompatibility with some native parts, or
    5) cannot load a class related to it, due to some reasons above.
    Could you guys suggest from where exactly is it trying to pick up the files.
    is it u201Cu2026/j2ee/cluster/apps/xxxxxxx/SFTP Adapteru201D  ????
    Can anyone suggest the possible reasons and the root cause of it
    Regards,
    Yogi

    Hi Yogi,
    i am glad you solved the problem.
    If you have any issue with the Advantco SFTP adapter, best is to send an email to "support at advantco.com" directly.
    Peter Ha * SAP NetWeaver PI Architect * Advantco International LLC
    www.advantco.com

  • SubVI with while loop + event structure not working in multi tab VI

    Hello Everyone,
    I am developing an interface for the control of a prober using Labview 2012, and I am stuck with some issue.
    To start with I provide you with a simplified version of my control interface VI, and with the sub-VI used to build and manage the wafer maps.
    The VI consists of several tabs: Prober Initialization, Wafer Handling, Wafer Map, Status, Error.
    The sub-VI can:
    1/ initialize the grid to display the map (sub VI Init Grid not provided here)
    2/ import XY coordinates from a txt file (sub VI Wafer Map Import)
    3/ display the coordinates and index of the die below the cursor
    4/ and when a die position is double clicked, and the boolean "Edit Wafer Map" is true, then the user can change the state (color) of the die between On-wafer die and Selected Die
    My issue:
    If I use the sub-VI by itself, it works fine. However when I use it as a sub-VI in the tab "Wafer Map", the map does not build up and I can no further use the embedded functionalities in the sub-VI.
    I suspect the while loop + event structure of the sub-VI to be the bottleneck here.
    However I don't know which way to go, that's why I'd be glad to have some advice and help here.
    Thank you.
    Florian
    Solved!
    Go to Solution.
    Attachments:
    Control Interface.zip ‏61 KB

    Hi NitzZ,
    Thank you for your reply.
    I tried to save the VIs in LV10, please tell me if you can open them now.
    Inside he event structure there is quite some code, and since I don't want to make the main vi too bulky, I would like to keep it as a sub-VI. 
    As you can see from the sub-VI, the event structure is used for extracting cursor position and tracking the double click action. These events are linked, through a property node, to the image "Wafer Map" which is passed to the main vi through connector pane.
    All values are passed this way as well (through connector pane). Is there another way?
    Maybe "refnum", but I don't really understand how to use them...
    If I use the event structure in the main vi, the wafer map is still not working. I tried it earlier.
    To implement the multi tab front panel, I used a tab control, and a for loop + case structure. For each element of the case structure, there is a corresponding action.
    For the case where I put the code (element=2) for Wafer Map, I also control the execution of the code with a case structure activated by the button "REFRESH". Otherwise I end up with a freezing of the panel right after the start.
    I hope these comments help you understand better.
    Regards,
    Florian
    Attachments:
    Control Interface.zip ‏104 KB

  • CRM Datasource-Delta not Working

    Folks,
    I am using CRM Standard Datasource 0CMS_RTCM_TRAN-Resale Tracking and Claims Management data..
    I have enhanced this Datasource with four fields and transported to Quality system..
    no problem with the new additions..Datasource is extracting properly..
    but Delta update is not working..Delta Queue is not picking any records..but new transactions are getting updated in the respective source tables..
    when i checked in BWA1- am getting these messages:
    error message:
    (121) MS_RTCM_TRAN: Table SMOXHEAD contains no BDOC name.
    Warning messages:
    (111) MS_RTCM_TRAN: No mapping found for extract field SLSR_ADDRESS_I..similarily for all the Datasource fields, its showing the same no mapping warning..
    its working fine with Full update..but for Delta update am facing these issues..
    Can you please explain what could be the reason for this and suggest a proper solution..
    Thanks and Regards,
    Yog

    Hi,
    Are there any transactions to change the BDOC name for Standard Datasources??..
    In BWA1, when i tried to change these ADAPTER settings, i am getting this message:
    "DataSource 0CMS_RTCM_TRAN cannot be edited with this transaction"..
    i hope if i specify the BDOC name, Extraction should be happening..
    so please suggest where i can perform these changes??..
    Note : currently no extraction is happening because of this..
    Regards,
    Yoga

  • PCL4 TABLE LOG FOR INFOTYPE 2001 IS NOT WORKING IN QUA 070 CLIENT

    Heloo,
    Could some one let me know the ways to capture the log of infotype 2001.
    I have used PCL4 table to capture all the changes made to INFTY 2001.
    This is working fine in DEV 070.
    But not working in QUA 070.
    Could someone let me know what is the problem and the solution.
    Thanks a lot for your efforts.

    Hi Lata!
    I created the absences (T554S):
    Ps grouping, Absence type text
    04,0100 VACATION WORKIN DAYS (quota working fine)
    34,0100 VACATION NATURAL DAYS
    When I check your steps I have this information
    1. Absence type screen no. should be 2001.
    I have checked in table T554S.
    Screen number quota working fine: 2001
    Screen number quota working bad: 2001
    2. Quota deduction should be selected in V_554S_Q table
    Check quota deduction quota working fine: is checked
    Check quota deduction quota working bad: is checked
    3. Check that in counting rule you have assigned correct deduction rule.
    Counting rule for quota working fine: is 010
    Counting rule for quota working bad: is 030
    The counting rule 030 is created for me, maybe this is the problem is a similar copy of the rule 010. It has different conditions because in Psgroup "04" the vacations are working days but in group "34" the vacations are natural days.
    4. In deduction rule check whether correct quota no. you have maintained.
    In deduction rule working fine the absence quota type is 10, standar leave, days
    In deduction rule working bad the absence quota type is 30,                        ,days
    I've checked the absence quota type and are similars:
    In 10 absence quota type
    ESG Time quota types: 1
    PS Grpg tm Quota Typ: 01
    Absence quota type: 10
    Time/measurement unit: Days
    Time constraint class: 02
    In 30 absence quota type:
    ESG Time quota types: 3
    PS Grpg tm Quota Typ: 02
    Absence quota type: 30
    Time/measurement unit: Days
    Time constraint class: 02
    What's wrong?
    Kind regards,
    Julian

  • MAPI over HTTP not working correctly, Outlook 2013 clients prompting for credentials during profile creation or opening depending on security of virtual directory

    ENVIRONMENT
    -1 Exchange 2013 SP1 CU7 server with all roles that is also a hybrid server with Office 365 tenant, mailboxes are all on premise only LYNC online is being utilized right now.
    -Exchange 2013 public folders
    -Mix of Outlook 2013 SP1 and Outlook 2010 SP3 clients all fully update to day as of Feb 2015
    Outlook anywhere is working perfectly across all clients both internally and externally using autodiscover.  Both Outlook 2013 and 2010 clients can open the program and create a profile automatically via autodiscover and no additional logon prompts
    are seen.
    We set the internal and external mapi virtual directory URLs to a valid URL that also matches the Exchange 2013 SSL certificate.  We set the security to ntlm, negotiate on the mapi virtual directory.  We reset IIS and enabled mapi over http in
    the org config.  We run in to problems here.
    Outlook 2010 clients appear to be working fine.  We can create a new profile and open and close Outlook without any logon prompts and verify that MAPIHTTP and Negotiate are used to connect to Exchange.
    Outlook 2013 clients are having problems.  As soon as we try to create a profile it says your administrator has made a change that requires you to restart outlook and then a windows logon prompt appears. If we authenticate Outlook will open and connect.
      This logon prompt should not occur.    We can confirm that it is connecting via MAPI HTTP and Negotiate.
    If we set the mapi virtual directory to NTLM only then a logon prompt also appears during every open of Outlook 2013.  We can confirm that it is trying to connect with MAPIHTTP via NTLM in the outlook connection test screen.
    I do not understand this behavior by Outlook 2013 which was supposed to be designed with MAPI HTTP in mind.  I would think the same issues would occur with Outlook 2010 but they do not.  I am not sure how to resolve this and I am looking for help.

    I have the same problem. Exchange and Outlook are both up to date. After creating a new profile Outlook prompts for username/password. A lot of users also get this prompt while
    working - the profiles have been "migrated" from Exchange server 2010. <o:p></o:p>
    Niko, as i can see in your screenshot you do not have Mapi over HTTP enabled. Why? You can change settings in the security tab – if you have Mapi over
    HTTP enabled all options are grayed out (please correct me if I
    am wrong):
    This is a very annoying thing – does anybody else have the same problem?
    Any suggestions on this?
    Marc

  • Sqlplus is not working after oracle 10g client installatio on linux server

    Him
    jsut now i installed oracle 10.2.0.1 client version in one my linux server. after successfully installation sqlplus is not working . could you please chekc and let me know what is the problem? below are my .profile details.
    # Set up the shell variables:
    EDITOR=vi
    export EDITOR
    ### Set the umask
    umask 022
    ### Set ulimit
    #ulimit -u 16384
    #ulimit -n 65536
    ### Set Oracle Environment
    export ORACLE_BASE=/u01/app/oracle
    export ORACLE_HOME=/u01/app/oracle/product/10.2.0/client_1
    export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/OPatch:$PATH
    export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/ctx/lib
    export LIB_PATH=$ORACLE_HOME/lib
    export ORATAB=/etc/oratab
    export NLS_LANG=american_america.we8iso8859p1
    export THREADS_FLAG=native
    echo ' '
    echo 'Oracle 10G environment has been setup'
    echo 'Export the ORACLE_SID to target database before connecting'
    echo ' '

    841731 wrote:
    Him
    jsut now i installed oracle 10.2.0.1 client version in one my linux server. after successfully installation sqlplus is not working . could you please chekc and let me know what is the problem? below are my .profile details.
    # Set up the shell variables:
    EDITOR=vi
    export EDITOR
    ### Set the umask
    umask 022
    ### Set ulimit
    #ulimit -u 16384
    #ulimit -n 65536
    ### Set Oracle Environment
    export ORACLE_BASE=/u01/app/oracle
    export ORACLE_HOME=/u01/app/oracle/product/10.2.0/client_1
    export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/OPatch:$PATH
    export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/ctx/lib
    export LIB_PATH=$ORACLE_HOME/lib
    export ORATAB=/etc/oratab
    export NLS_LANG=american_america.we8iso8859p1
    export THREADS_FLAG=native
    echo ' '
    echo 'Oracle 10G environment has been setup'
    echo 'Export the ORACLE_SID to target database before connecting'
    echo ' '" sqlplus is not working" is not an actionable error message. Unfortunately, you didn't show us what happens when you try to execute sqlplus.
    Essentially, what you've done is the equivalent of 'here's a picture of my garage. Why won't my car start?'

  • Policy to force use of AD photos only is not working (global policy and client policy) - Users can change their picture

    Hi,
    On Lync server 2013 we are trying to disable the option to change the photo on lync client, the global policy has been set to display only AD photos, this didn't work so we create a client policy with the same setting and applied to users but is not working.
    Is there something that we are missing?
    Regards.

    So you mean to say the "Edit or Remove Picture" button is active on the Lync client and you want to disable it?
    AFAIK, The button is active if you are on Exchange 2013. Is this true for you?
    If Yes, maybe you can try this on your Exchange Shell. 
    Set-OwaVirtualDirectory -identity "owa (Default Web Site)" -SetPhotoEnabled $False
    Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you have asked, please mark the thread as answered to aid others when they are looking for solutions to similar problems or queries. <p>-------------------------------------------------------
    </p> <p>The opinions expressed here are solely my own and do not express the views or opinions of my employer.</p>

  • Package Services are not working in APP-V Client

    Hi Guys,
    As  Virtualizing iPhone Config Utility 3.6 in APP-V 5.0  Publishing in APP-V Client.
    After launching shortcut, it is throwing error like "Apple Mobile service" is not working  and service is also not installing in client machine while it is automatic. it is running through local System".
    can any say that APP-V 5.0 is having ay limitations that it will not capture service which it running through Local Service" 
    i have tested some packages which is having services in Local service not capturing.
    can any one explain.
    Thanks in advance

    The limitation is that only services running as LocalSystem are captured and supported.
    More information about virtual services here .

  • Aironet 3602i not working with SAP (NetWeaver) client

    Heres the scenario.
    Wireless client connected to a 3602i AP running on 2500 series WLC with a latest 7.2 code.
    Client will now connect to AT&T vpn client - success.
    Client will connect to SAP application using netweaver gui - failed.
    With the same scenario, except for the access point being used, client will connect to SAP application using netweaver gui
    1242AP IOS/CAPWAP - success
    1252 CAPWAP - success
    3500 CAPWAP - success
    Whats with the 3600 series APs that i cant pass traffic with the SAP application?
    Troubleshooting done:
    802.11n disabled - still failed
    Clean Air disabled - still failed
    MFP disabled - still failed
    Any other solutions?
    Sent from Cisco Technical Support iPhone App

    Hi Amjad,
    You are correct, same config, same WLC, one port is connected in 2500 WLC.
    Here's the process for working SAP application
    1. Client will connect to 1242/3500 wireless AP - success
    2. Client will connect to AT&T Global Network Client (VPN Client) - success
    3. Client will connect to SAP Logon (SAP Netweaver) - SAP GUI for Windows - success (see attached sap success logo)
    Here is for not working SAP application
    1. Client will connect to 1242/3500 wireless AP - success
    2. Client will connect to AT&T Global Network Client (VPN Client) - success
    3. Client will connect to SAP Logon (SAP Netweaver) - SAP GUI for Windows - failed (hangs on the logo), waited for 10mins but still stuck in this logo, i have to disconnect the VPN to terminate the connection to SAP

  • Address book and ical not working for snow leopard clients

    We have upgraded our server to mountain lion from snow leopard.
    At first glance all appears to have gone well, however, the ical and address book services don't appear to be working for snow leopard clients. These services DO appear to be working for lion clients.
    Any ideas?
    Thanks.

    I am at work right now and don't have access to my Mac. But I need to as if your Dad is on Windows Active Directory network? I also found these directions for Princeton's 2010 Exchange that might help. Did he set up the Address contacts & iCal Calenders were enabled when setting up the account in Mail?

Maybe you are looking for