CRM_COPY_BADI - Filter value

Hi Experts,
I want to create new filter value for BADI CRM_COPY_BADI.
Kindly explain how to do it?
Thanks and Regards,
Karam

Hi
steps i followed:
1. in define copying control for transaction type I define src CXOP tagt ACCP(activity partner) copying routine as 9oppt.
2. in BADI implementation filter is 9oppt.
now putting a break point in method ORDERADM_H and checking in GUI from oppt to act. partner
even then badi impl. not called.
what may be wrong in this approach?
thanks
vidushi

Similar Messages

Restrict filter values that are shown in the selection screen

Hi Experts
1) Is it possible to restrict the filter values that are shown in the selection screen in BEx web? When a user are asked to enter a material number and uses the selection button in BEx web, he should only see material numbers for one specific plant. How is this done?
2) Is it possible to remove the selection button for å characteristic filter in the selection screen in BEx web? The selection button I am talking about is the button to the right of where you enter the filter value (two white papers on top of each other). If there is no solution for question 1 we have to go for question 2 solution.
We are using BI 04s, SP 09.
Kind regards
Erik

Hi Erik,
It seems that you would like the user to see value for 1 single plant. If the Plant Value is fixed then you can use this value in the Query and hardcode it.> in the query go to the Plant Chrac and keep a constant value of the Plant.
How ever if you need this value to be dynamic then use a variable for customer exit and populate this value using ABAP.
Regards,
Jasprit

Filter values are not displayed in the Popup Screen

Hi Gurus,
I have executed the query from the Query Designer using Execute to the browser and tried to filter the values for 0plant
Then i am getting the values as question mark '?????' for Key as well as Text.
Note: I am not getting the key values for any of the characteristics.... in any report...
Is there any setting need to done in BI or Portal side...
Please help me if any one got a similar issue....
Thanks in Advance
Seshu
Edited by: seshagiri.rao on Oct 25, 2010 2:19 PM

Hi Vandana thanks for the reply.... i have been waiting from yesterday... to see some replies....
The values in the BW are ok & i have activated the master data too..
I am getting all the filter values for the query in RSRT, but when i execute the same query to the browser i am getting the values as '????' in the filter...
Eg.
Plant Key Plant medium Text.....
but when i select a particular row and add the values i can see the data as below.
1901 Bhubaneswar Depot
Please let me know if any more information is needed.
Regards
Seshu

Changing Filter Values from Macro in BW 7.0

Hello,
in my Workbook I need to change Filter Values of some queries in runtime.
The first thing I found was BEx API reference for BW 3.5, but I wasn't able to make these functions work. After all I found this code:
    Dim BEx As Object
    Set BEx = Application.Run("BExAnalyzer.xla!GetBEx")
    Dim dp As Object
    Set dp = BEx.DataProviders.Item(sDP)
    Dim dimension As Object
    Set dimension = dp.Request.Dimensions.Item("0CALDAY")
    Dim filters As Object
    Set filters = dimension.filters
    If Not BEx.ServerStateExists Then
    MsgBox " Please refresh before using this Makro"
    Exit Function
    End If
    Call filters.SetFilterValue(sFilter) 'this sets the filter value
But using this code I wasn't able to set more than 1 filter value, because the function SetFilterValue removes all previous filters, but now I need to set more than 1 filters.
I also tried to separate different filter values with comma, but this did not help.
Also I will be glad if someone could give me a link on documentation about BEx objects in Excel.
Thanks in advance,
Pavel Baronov

Hi.........
Check this........
http://www.netsaptech.com/SDN/demo/BIM301.pdf
Regards,
Debjani.......

PerformancePoint in SharePoint 2010 - Unable to get filter values from... Error 10828

I currently am using PPT to expose data from a Microsoft Analysis Server cube. The cube is wide open and requires no permissions to access.
The behavior of my filters is odd as sometimes they work perfectly fine, and other times I receive the following error upon report run:
Unable to get filter values.
An unexpected error occurred. Error 10828. Additional details have been logged for your administrator.
I have looked at the ULS logs and found the following:
An unexpected error occurred. Error 10828. Exception details: System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.QueryTimeIntelligenceInternal(DataSource dataSource, DateTime currentTime, String formula)
at Microsoft.PerformancePoint.Scorecards.Server.PmServer.QueryTimeIntelligence(RepositoryLocation dataSourceLocation, DateTime currentTime, String formula)
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem: Microsoft.PerformancePoint.Scorecards.BpmException: Unable to get filter values. PerformancePoint Services
error code 20700.
This is odd to me, as I can trick the report to run by changing the date filters to another day, then back to the original days that error'ed out and everything is fine. Some guidance would be appreciated.

Hi,
Do you mean that you have Office 2007 and Office 2010 both installed in you computer?
Based on my test, I copy a Access 2010 database into a computer only installed Offic 2007, then using Excel 2007 to import Access database data, no error occurred.
So double click the Access database to see whether the databased is opened with Access 2007 or Access 2010. If it is opened with Access 2010, then try to save it as Access 2007 to
check the issue.
Jaynet Zhang
TechNet Community Support

How to capture the entries based on filter values in oo alv..

Hi all,
I have a scenario in my oo alv report, when the user select the any column on report and selects the filter option. In that the user can enters required values. Based on filter values the output will be displayed. Now how can i capture currently displaying entries on report.
Thanks,
Ashok

Hi Jozef,
Is that GET_FILTERED_ENTRIES( ) reads the indexes or values from the entries..?
Thanks,
Ashok

How can I pass a filter value to another report?

I'm using a filter within a formula of a field. For example: (FILTER("Facts - Actuals Ledger"."Actual" USING ("Time"."Fiscal Quarter" = '2012 Q 2'))-FILTER("Facts - Actuals Ledger"."Actual" USING ("Time"."Fiscal Quarter" = '2012 Q 1')))*-1
What the above is doing is calculating the variance between Q1 and Q2. My issue is when I drill on this value to a more detailed report, it's combining the Q1 and Q2 values, instead of showing the difference. I'm trying to avoid having to hard code the drill report and was wondering if there's any way to pass the calculated FILTER to the other report?
Thanks.

Hi,
I presume that you want to show the the difference between a prompted quarter and its previous quarter?
If so, I would use the Ago Time Series Function to create a new logical measure for prior quarter e.g.
ago("Facts - Actuals Ledger"."Actual", "Time"."Quarter", 1)
Note that the function should contain the time dimension level for quarter. The 1 at the end is the offset e.g. 1 quarter ago. This measure will now return the prior quarter value for whatever quarter is prompted.
Create a prompt for your report for Fiiscal Quarter, and set a filter in the report for the same column with an operator of Is Prompted.
Add the base measure ("Facts - Actuals Ledger"."Actual") and your new Ago measure to the report. When you prompt the report with a quarter, these two columns will show the Actual amount for the promted quarter and the previous quarter respectively. Now all you need to do is subtract one from the other.
Now, when you drill to another report, the filter value of the prompted quarter will be passed across. Apply the same logic to define measures in the drill report, receiving the prompted quarter only.
Note that you can also use Time Series Functions in the column formula when creating the analysis.
Please mark if helpful / correct,
Andy
www.project.eu.com

List view error "Filter Value is not in a supported date format"

I've column "Name = Order Status","Type = Calculated" & Data Type = "Date and Time". I've given this Condition in the formula:- =IF(NOT([PO Date]=0),"ORDERED","NOT ORDERED"). I'm trying to create view
for this column but its getting error while create the view "Filter Value is not in a supported date format".
Same error I'm getting for column "Name = Status","Type = Calculated" & Data Type = "Number". I've given this Condition in the formula:- =IF([PO Date]="","",IF(NOT([Balance Qty]=0),"OPEN","CLOSED"))

Can you check data type returned for your calculated column 'Balance Qty'?
Try to set it as Number. It may help you.
Thanks.

How to Add a New Filter Value in BEx WAD to Display All Result

Hi experts,
I want to add a new filter value in BEx WAD to display all data records. The scenario is as follows:
The status field can have two values: Active ("A) and Inactive ("I").
But the requirement is to have a third value to display all the data records (Active + Inactive). E.g. the value can be "G". The purpose is to increase the understandability for report users.
Does anyone have an idea?
Regards,
Joon

Hi Vineet,
thanks for your reply. The problem is that there are only 2 values available for this Characteristic: "A" or "I".
The requirement is to have a third value "G" (instead of the default "All Value") due to historical reason, because all future report users have been working with R/3 reports for quite some time and they are accustomed to using "G" for displaying all values.
Is there any possibility to realize this?
Thanks,
Joon

Error occured when selecting a filter value on the query

hi,
after the execution of the query on a multiprovider, i select a filter value for a particular characteristic then i get a pop up error message "Error reading the data of infoprovider ZTC_SUV12"
could anyone of you help me
Thanks and Regards,
Subha

Hello,
          Does the MultiProvider that contains an SAP RemoteCube , if so then try this depending on which system you are working.
BW 3.0B
           Implement Support Package 24 for 3.0B (BW3.0B patch 24 or SAPKW30B24 ) in your BW system. The Support Package is available ifnote 0723193 with the short text "SAPBWNews BW Support Package 3.0B Support Package 24", which describes this Support Package in greater detail, is released for customers.
BW 3.10 Content
           Implement Support Package 18 for 3.10 (BW 3.10 patch 18 or SAPKW31018) in your BW system. The Support Package is available oncenote 0723260 with the short text "SAPBWNews BW 3.1 Content Support Package 18", which describes this Support Package in more detail, has been released for customers.
BW 3.50
           Implement Support Package 09 for 3.5 (BW3.50 patch 09 or SAPKW35009</>) in your BW system. The Support Package is available oncenote 0763335 with the short text "SAPBWNews BW Support Package 09 NetWeaver'04 Stack 09", which describes this Support Package in more detail, has been released for customers.
hope it helps,

Error message while selecting a filter value

Hi Guys,
I am running a sales report n its executing fine...I mean...the report is getting displayed properly..but when i am trying to select a filter value...for example...trying to select a sold to party....when i selct that particular sold to party and execute the query...its coming up with an error...pls check..
Error msg:
The following error text was processed in the system BWP : SQL error 3114 occurred when accessing program CX_SY_OPEN_SQL_DB=============CP part LOAD.
The error occurred on the application server soabwp1_BWP_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: FETCH_DATA_OPENSQL of program SAPLRSDRS
Function: RSDRS_CURSOR_FETCH of program SAPLRSDRS
Function: RSDRS_READ_DATA of program SAPLRSDRS
Function: RSDRC_BASIC_DB_QUERY_DATA_GET of program SAPLRSDRC
Form: BASIC_QUERY_DATA_GET_ROLAP of program SAPLRSDRC
Function: RSDRC_BASIC_QUERY_DATA_GET of program SAPLRSDRC
Function: RSDRC_BASIC_CUBE_DATA_GET of program SAPLRSDRC
Form: DATA_GET of program SAPLRSDRC
Function: RSDRC_CUBE_DATA_GET of program SAPLRSDRC
Function: RSDRC_CUBE_DATA_GET_OLAP of program SAPLRSDRC
Its pretty urgent...I will award the highest points if this gets solved...
Thanks,
SAPconsultant.

Hi
It depends on the ssytem settings. The problem with your query is that it is not able to fetch all the data due to lack of memory. However, when you are giving smaller range, you are getting the output. You can either ask the basis guy to increase the memory space or try running the query by giving smaller date range.
Hope it helps.
Lasya.

Assigning a DataProvider filter value with JavaScript

I have a "Fiscal Yr/Period" filter characteristic in my web application that I am assigning the value of the current month and year when the web application is loaded. In other words, this filter is applied to the DataProvider when the application loads (code below):
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_DATA_PROVIDER"/>
         <param name="NAME" value="C_LPR_Q018"/>
         <param name="QUERY" value="C_LPR_Q018"/>
         <param name="INFOCUBE" value="ZPP_C01"/>
         <param name='FILTER_IOBJNM' value='0FISCPER'/>
         <param name='FILTER_VALUE' value='H12004010'/>
         DATA_PROVIDER:             C_LPR_Q018
</object>
As you can see above, the value for the '0FISCPER' object is hardcoded and thus requires me to change this monthly. I have written some JavaScript code to calculate the current mo. and yr. however I can't get my JavaScript variable that holds the value I need assigned to the FILTER VALUE. Can I even assign a JavaScript variable as the filter value? Is there another way? Any help would be greatly appreciated.

Hi Allen,
if you want to change any param of an object, try the function SAPBWOpenURL, which should be sent against the object you want to change. Documentation is at :
http://help.sap.com/saphelp_bw33/helpdata/en/f1/0a5a2ee09411d2acb90000e829fbfe/frameset.htm -> Business Explorer ->
Web Application ... -> Befehl URLs
Concat the date in JavaScript and call
SAPBWOpenURL(SAP_BW_URL_Get()+'&item=...&FILTER_IOBJNM="0FISCPER"&FILTER_VALUE="TheDateYouWant"') (I hope I set the " and ' correctly, better you should check).
For example you can insert :
<HEAD>
<script>
    function callTheTableWithTheDate()
        SAPBWOpenURL(like above);
</script>
</HEAD>
<BODY onload="JavaScript:callTheTableWithTheDate()">
It's only a hint, adjust it for your requirements. You can save the date in a cookie too and reuse it whenever you want. You know how to handle cookies ?
    Bye
    Ralf

Passing filter values from column formula in OBIEE 10g

Hi,
I am trying to pass filter value from the column LY Spend YTD columns where we have a filter option and passing the year filter 2013 as below.
FILTER("Fact - Purchasing - Invoice"."LY Spend YTD" USING (Time."Year" = '2013'))
My goal behind doing this is, we have a filter already present for the whole criteria on the year which is 2012.
But specifically for this column i dont want to pass the year 2012 to it, Instead I want to pass 2013 to it. But I am not succeding the result is blank.
Please suggest and let me know if further understanding is needed.

Hi Srini
Thanks for you reply.
I cannot do that way because some measures are satisfying with year 2012 and displaying the data and other measure are satisfying with 2013.
I am working on LY Spend YTD, LY spend YTD - 1, Spend YTD and Year ago spend.
So thats the reason I have thought that way of passing the filter in column formula irrespective of criteria filter.
Please suggest.

PMS: Creation of new filter values

Dear Reader,
I am working on a PMS implementation where one particular appraisal template has multiple appraisers. The only way I can attach and identify between multiple appraisers is by creating new filters in table T77HAP_FLT_SEL.
I plan to then use BADI implementations to help identify the persons for each filter value from OM relationships.
But am at a loss as to how to create new filter values in this table. Would anybody be in a position to advise?
Thanks in advance.
Example scenario:
Every appraisee has three appraisers: MANAGER, BUSINESS AREA GENERAL MANAGER (BAGM) and DOTTED-LINE MANAGER (DLM). There is no unified logic in the existing OM structure to identify the BAGM other than to create a custom relationship between all child org units and the position of the BAGM.
I need to name all three participants as appraisers in the appraisal category - but the only way I can name multiple persons as appraiser is to provide a selection ID at the category level (the selection ID being the filter value picked up from table T77HAP_FLT_SEL). For this, I would need to create values for BAGM and DLM in T77HAP_FLT_SEL so that I can pick them up when configuring my category.

Thanks Dilek,
That was the first thing I had tried. However, there is no maintenance dialog for T77HAP_FLT_SEL in transaction SM30 - the error says no maintenance objects exist for this table/view.
From my research so far, it looks like the selection ID/filter value is picked up by BADI HRHAP00_SELECTION. But am not sure if the same BADI is used to populate new values in this table or not.

Select the filter value display "No Entries Found"

Hi All,
I have a problem with the bex query. Query is built on a multiprovider.
I am using restricted key figure with constant selection checked for the characteristic that is available only in one cube.
Because of this when I right click and select Filter values on the free characteristics from the report, I get (No Entries Found)
If I remove constant selection from the key figure, report works fine.
Can someone help with a solution;
Thanks,
Biju

Assuming your data is coming from only one cube...
Drag 0INFOPROV in your Filter and restrict it with your your Cube
You can find 0INFOPROV in Dimensions under Data package
Hope this helps.

CRM_COPY_BADI - Filter value

Similar Messages

Maybe you are looking for