CRM PCUI Issue; tab product; no of items displayed configurable?
Hello everybody,
I am facing one CRM PCUI problem.
customer would like to set no of items, which can be max. displayed in CRM PCUI application CRMD_BUS2000115, on tab "product" on Level "Detail Area 1". As default max. 10 could be displayed, this is however not enough. if there are more items assigned to one order, page up/down functionality can be used, that's however not really helpfull for customer. e.G. for orders with 100 positions user hast to click 10 times to display all positions.
Which class/method is used in standard to set no of items to be max. displayed?
could I adjust that without modification?
Event: BTX_PRODUCT
Screen Element Type : MEDL
Group Tab Page: SLO_ODC1
Thanks a regards
Jaro
email:[email protected]
Hi,
You need to identify the field group that you want to increase the 'no. of lines'.
say the field group is 'xxxx'
goto transaction CRMC_BLUEPRINT_C => Application Element => Field Group => Field Group.
Search the field group 'xxxx'. Now, select that line and scroll to the very right. You will see a parameter as 'No. Of Lines' and the value in that field will be '10'. change it to your desired value and re-generate the Field Group 'xxxx'.
This will increase the no. of lines that u want to diaplay on the screen by default.
Reward points if this helps.
Cheers,
Raviraj
Similar Messages
-
Unit Price in Issue for Production for Item with wrong UoM
Dear All,
In issue for production the item cost being picked does not match either our Last Purchase Price or Price List1. In some cases the price considered is an average:
Eg:- For Item A with Purchase UoM in Nos. and Inventroy UoM in Gms, we had not enetred the conversion factor i.e 1 No=100g. Thus GRN was made for 25 Nos. @ Rs.450/Unit. But actual stock was 2500g. Hence to rectify the stock we made an OB entry for 2475 as on GRN date with zero Price. Thus total stock was 2500 and Value 25*450=RS.11250
When we did an Issue for Production for this item: Qty:400g, the unit price considered was Rs.28.125 when the actual price to be considered is Rs.450[Unit Cost]/100 [UoM Conversion]=Rs4.5. We had entered Rs.4.5 in Price List1 and had selected this price list in the BoM as we had not entered a conversion factor in the Item Master Data and SAP does not allow alterations to this tab once the Item is involved in transactions.
I think the system calculated the price as follows: (25450+14750)/400=Rs.28.175
How do we avoid/correct this in the future?If you need the stock price correct, the only option might be creating a new item with correct information in the first place. Once you have error data to start with, there is no way to corrected as you wish.
Thanks,
Gordon -
Hi,
I'm having a situation when I print "Issue for Production" for an item, sometimes the batch issued printed out wrongly. I'm wondering is there a way to write a query to display issue for production (item code, item description, quantity, batch) based on production number? Please advise. Thank you for your help and time.
Cheers,
sereneTry the code below. You will have to replace the XXXXXXXXX with Document Number of the Production Order.
SELECT dbo.OIGE.DocEntry,dbo.OIGE.DocNum, dbo.IGE1.ItemCode, dbo.IGE1.Dscription,
dbo.IBT1.BatchNum,dbo.IBT1.Quantity, dbo.IGE1.LineNum
FROM dbo.OIGE INNER JOIN
dbo.IGE1 ON dbo.OIGE.DocEntry = dbo.IGE1.DocEntry
INNER JOIN dbo.IBT1 ON dbo.IGE1.ObjType = dbo.IBT1.BaseType
and dbo.OIGE.DocEntry = dbo.IBT1.BaseEntry and dbo.OIGE.DocNum = dbo.IBT1.BaseNum
and dbo.IGE1.LineNum = dbo.IBT1.BaseLinNum
and dbo.IGE1.ItemCode = dbo.IBT1.ItemCode
where dbo.IGE1.BaseType = 202
and dbo.OIGE.DocNum = XXXXXXXXX
order by dbo.IGE1.LineNum
Krishnan -
Hi Experts,
Can you tell me how to create a Tab page in work item display. Please provide the step by step procedure.
Thanks in advance.
Points will be rewarded.hi viji,
For having a tab in the workitem dispaly you need to use screen painter for the same, go to txn SE 51 and build a custom screen with the tabs, once your screen is active then call the same screen in the workitem preview tab of task or a much better option that i feel is calling the screen in a task and assigning the task itself as an activity in the workflow.
Cheers,
Saurabh Anand
PS: Award points if it helps. -
Error while adding the issue for production (item cost not found)
Hi all,
The scenario is,
when the user is trying to add the issue for production system is showing error item cost not
found.The item which is issued is Inventory + purchase item with manual issue method.The valuation
method for that item is FIFO.since the valuation method is FIFO,error related to item cost should
not occur.
Since the valuation method is FIFO.Item cost error should not occur.
The error related to item cost must not occur at the time of issue for production.
Regards-
Mona.Hi!
Please check these threads
Sales Delivery Document
Item Cost Error
No item cost was found -
Hi Experts,
I got an issue in production that it should trigger mails daily once. But this program is triggering for every hour,where to look it pls how to debug this issue?can this FM can check?
call function 'DURATION_DETERMINE'
importing
duration = lv_duration
changing
start_date = ls_history-datum
start_time = ls_history-uzeit
end_date = p_datum
end_time = p_uzeit
exceptions
factory_calendar_not_found = 1
date_out_of_calendar_range = 2
date_not_valid = 3
unit_conversion_error = 4
si_unit_missing = 5
parameters_not_valid = 6
others = 7.
if sy-subrc <> 0.
ThanksHi ,
Youi can check this tables
MKPF material document
MSEG material document (item level)
RESB Material reservations
RKPF header
Rergards
SANIL -
Error While Updating Issue For Production
Hi,
When i am trying to update an UDF in issue for production i am getting the following error message.
Item is Not a Component to the Referenced work order[Goods Issue - Object Type] Message 3560 -5Dear Manikandan K,
Regarding the message we can tell you that the error message
"Item is not a component of the referenced Work Order" usually appears
because there is a case sensitive problem between the item code given
in the BOM and the item code given in the item master data.
Please check if the item codes of the BOM are exactly the same as the
codes given in the item master data. There should not be any differences
between spelling of the codes (for example item code in the item master
data is with capital letters X00014447 while the item code in the BOM
is with normal letters x00014447).
In case you find item with this issue please correct its item code
in the BOM manually so it will be exactly identical with the code given
in the item master data.
Regards,
Marcella Rivi
SAP Business One Forums Team -
Error while doing Good Issue for Production Order using BAPI
Hi All,
I am facing an error like 'u2018Content of order 1011907: MDT218AJ10 transferred to interface (IMSEG): T-86410-71".
I have written the code as below. Please let me know what is missing when using the BAPI 'BAPI_GOODSMVT_CREATE'. What is the cause of this error ?
*Action in Transaction (GM_CODE)
*GM Code for Goods Issue for Production Order is 03
gs_gmcode-gm_code = '03'.
*Header Data
*Posting date
gs_header-pstng_date = sy-datum.
*Document date
gs_header-doc_date = sy-datum.
*Item Data
*Material
gs_item-material = zptp_s_rf_migo_261-matnr1.
*Movement Type
gs_item-move_type = '261'.
*Movement Indicator
gs_item-mvt_ind = 'F'.
*Stock Type
gs_item-stck_type = 'F'.
*Plant
gs_item-plant = gv_plant.
*Storage Location
gs_item-stge_loc = gv_str_loc.
*Quantity
gs_item-entry_qnt = zptp_s_rf_migo_261-menge2.
*Unit
gs_item-entry_uom = gv_uom.
*ISO code for unit of measurement
gs_item-entry_uom_iso = gv_uom.
*Order Number
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = zptp_s_rf_migo_261-aufnr
IMPORTING
output = gs_item-orderid.
*Reservation Number
gs_item-reserv_no = gv_resv_num.
*Reservation Item
gs_item-res_item = gv_resv_itm.
*Reservation Type
gs_item-res_type = gv_resv_type.
APPEND gs_item TO gt_item.
Calling BAPI_GOODSMVT_CREATE to create the Material Document Number
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = gs_header
goodsmvt_code = gs_gmcode
IMPORTING
goodsmvt_headret = gs_headret
TABLES
goodsmvt_item = gt_item
goodsmvt_serialnumber = gt_serial
return = gt_return.
Thanks in Advance.hi,
did you look at message ?
System says, there are differences between the interface data and the order data. It can be anything. I think you should check
data in the interface .
this is the long explanation of your message :
Diagnosis
When calling the function module MB_CREATE_GOODS_MOVEMENT or the BAPI GoodsMovement.CreateFromData (BAPI_GOODSMVT_CREATE) to post a goods receipt for a production order, there are differences between the interface data and the order data.
Example: The order was created for plant 0001, but plant 0002 is passed on in the interface.
The system checks this for the material and the order item.
System response
Due to this difference, the system cannot post the goods receipt.
Procedure
Check the data in the interface (IMSEG-WERKS, IMSEG-AUFNR). If necessary, correct the plant or the order number in the interface.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Feb 6, 2012 11:24 AM -
Goods Issue from Production Order in SAP
Dear experts,
I faced one issue not yet solve is that my customer created the production order
then already issue for production for all quantities of child item .
Example:
Production OrderItem A
Item A1 = 2 Qty
Item A2 = 2 Qty
Item A3 = 2 Qty
Issue for Production Item A
Item A1 = 2 Qty
Item A2 = 2 Qty
Item A3 = 2 Qty
But later on, my customer found out that 1 Qty of Item A1 already damaged.
So they want to issue one more Qty of Item A1 instead of one that already damaged.
How can I issue one more Qty for this item?
Please your advices are necessary for me.
Best regard,
BoreyHello Borey,
Solutions may depend upon the way you want to book the cost for the damaged part A1.
(a) If you want to book the cost to the production order itself (production order is a cost object), manually book consumption for another quantity using MB1A, 261 movement (you will have to mention the production order during posting this consumption).
(b) If you do not want to book higher cost to that production order, you can:
1. Extract damaged quantity of A1 from that production order using MB1A 262 movement.
2. Create a manual QM lot and after rejection, move that damaged quantity to blocked stock.
3. You can scrap or rework from that blocked quantity later.
4. Issue another quantity of A1 from unrestricted stock to that production order using MB1A 261 movement.
Hope I could help you.
Best Regards.
Rajen -
Hi Experts,
while i am doing MIGO(Goods Issue to Production Order, I am getting the below ABAP Error:
Please give solution, It is urgent requirement.
THE ERROR IS:
Short text
Illegal interruption of the event LOAD-OF-PROGRAM.
What happened?
Error in the ABAP Application Program
The current ABAP program "/MRSS/SAPLRAP_INT_OB" had to be terminated because it
has come across a statement that unfortunately cannot be executed.
Error analysis
During the flow of the event LOAD-OF-PROGRAM (event for the
initialization of an ABAP program), a condition occurred under which
the event was to be left early. This is not permitted as it would
result in an inconsistent status in the ABAP program.
Trigger Location of Runtime Error
Program /MRSS/SAPLRAP_INT_OB
Include /MRSS/LRAP_INT_OBF00
Row 34
Module type (FORM)
Module Name GLOBAL_INIT
Source Code Extract
Line SourceCde
4
5 *&---------------------------------------------------------------------*
6 *& Form global_init
7 *&---------------------------------------------------------------------*
8 * text
9 *----------------------------------------------------------------------*
10 FORM global_init.
11
12 * local data
13 DATA lv_badi_impl_exists TYPE flag.
14
15
16 * get ref to BAdIs
17 CALL METHOD cl_exithandler=>get_instance "#EC CI_BADI_GETINST
18 CHANGING
19 instance = gv_ref_badi_inter_company.
20 * CALL METHOD cl_exithandler=>get_instance
21 * CHANGING
22 * instance = gv_ref_badi_rap_back.
23 * CALL METHOD cl_exithandler=>get_instance
24 * CHANGING
25 * instance = gv_ref_badi_ps_int.
26 CALL METHOD cl_exithandler=>get_instance "#EC CI_BADI_GETINSTHi Rob thanks for your response. I thought about doing an OSS note however; I would think I would need to get the problem in config corrected first as it contradicts each other. The problem I am talking about is how they are to return material to vendor....I have never even seen this as a process in my 10 years....
Process.....when the PO is a return to vendor PO they go to migo and choose the goods receipt and mvmt type 101 and the system will default the 161 in the item level....the two are inconsistent. If I try to change the top level to a 161 mvmt (as this is what I am used to seeing) it gives the error that the PO is not a stock transport order... Would you agree that I should correct that problem first before creating an OSS note? -
Hi Everyone !!!!!!
Actually i had made Production Order Form in which i can populate all the Production order with respect to BOM (Bill of Material).
Now i want to Populate Specific Production Order Number another form which is "Issued for Prouction " Basically Now i want to developed another form which can be worked Like Issue from Production Screen.
For this i have to use Production Order Object in SAP based....
Could anybody have sample code for this .......that would be really helpful for me,
The Main Problem is that i do not know how it will start ? how can i get the Production Order as well as their Item List.....and how can i issued Production Order in Issue from Production Form.....
could you guide me that where should i have to start ........
Thanks
Regards..
Rizwanhello
Check the following thread:
Regards
János -
How to show returned components on Issue for Production on a query.
Hi Guru's,
Is there a way to show the items that have been returned (Return Components) on Issue for Production using a query?
Thanks and Regards,
ChristianHi,
1. Create row level UDF for issue from production order.
2. Assign below FMS to this UDF and set it auto refresh based on quantity.
SELECT T0.[Quantity] FROM IGN1 T0 WHERE T0.[BaseRef] = $[$13.61.number] and T0.[ItemCode] = $[$13.1.0]
Thanks & Regards,
Nagarajan -
Calling wrong BSP url in CRM PCUI
Hey
Im using CRM 4.0 PCUI 60.2 and issue with an event on the Quotation BSP. In this application you have the opportunity to print/preview an quotation. If i press this button, a new window opens with following URL:
http://myhost:8003/sap/bc/bsp/sap/ml_preview.do?
The problem is that this url is incorrect and i get an BSP error. The correct URL should be http://myhost:8003/sap/bc/bsp/sap/crm_ml_preview/ml_preview.do?
How can i change this url? should i do it in the config of the PCUI ? In that case HOW? or is it possible to make an alias in the transaction SICF?
Best Regards
Kristoffer EnghHi,
we've already done a rework of the marketing attributes screen by using the technique I've described in my Weblog <a href="/people/gregor.wolf3/blog/2005/05/27/use-crm-pcui-html-viewer-to-call-a-custom-url">Use CRM PCUI HTML viewer to call a custom URL</a>. But it has one drawback: You can't use the Save button of the PC-UI applicaiton. You have to provide your own. But the usability enhanchement is rearly great.
Regards
Gregor -
When typing the product in the Item Grid - it goes-off
Hi Experts,
we are facing a strange problem.
We have created a new item grid assignment block Z* (similar to BT115QIT_SLSQ) in the CRM Quotation (BT115H_SLSQ) apart from the existing one.
Now when we try to create/insert an item using the F4/Search Help it works fine.
But When we try to create/insert an item by by typing it or copy-pasting it and enter, it goes-off & ordered_prod becomes blank.
Does any one has has idea on that or faced similar problem?
Thanks in Advance!
Regards,
TarakHi Masood,
in the SET_ORDERED_PROD - the product value is there in <nval>, so it is set
but in GET_ORDERED_PROD - it is not able to get that value.
In the create context node of the CTXT class - I am not creating any new context node. Actually I have copied the component BT115QIT_SLSQ into a Z* component. So the Z* component is exactly similar to BT115QIT_SLSQ, then added this component to the header component BT115H_SLSQ in the overview page as an assignment block. So now we have 2 assignment blocks for the item grid, now I am controlling the products into these item grids using the Item category/category id. It works perfectly fine when i use the search help for the products.
But when I type it - this problem is coming.
Here I am using the context node BTADMINI (which is standard & present in BT115QIT_SLSQ & so in Z* as well).
Regards,
Tarak -
CRM5: Edit an attached excel doc in the PCUI attachments tab
Hi Experts
I am using CRM 5.0, Portal 7.0
After attaching an excel document under the attachments tab in the PCUI for a lead transaction: when I open the document to from the attachments tab by clicking on the document link icon, the document opens fine and then I make some changes to the doc and thereafter close the excel doc, I get a prompt to save the doc, I click Yes but then the destination to where I must save the doc points to my Desktop.
So the changes do not take effect becoz document has not been saved in the correct destination. But in the GUI you can just click on the edit doc button and save it as versions or replace the existing doc.
How can I edit/change an attached excel doc in the PCUI attachments tab and save the changes so the attachment reflects changed doc in versions or even replacing the original??
Please help?
Regards
Pragasenhi,
i had the same problem, but actual there is no solution according to SAP!
in pcui you can only work online on MS Word Data... Any other file types have to be saved locally and replace the file in crm.
yours
michael
Maybe you are looking for
-
I've been unable to use iTunes for over 3 weeks now. Initially, it would prompt me to Sign In with my Apple ID and password each time it tried to start, and when I clicked Sign In, it'd respond with variations of: "Your device or computer could n
-
How to Edit Key Fields or Delete Lines from Table Entries
Hi Experts While releasing Transport Request Number we are getting an error during release. This seems to be as a result of improper data feed while running of eCATT's . The dates in the all these fields have been entered as " . .0101" which is in
-
How slow is Safari for you at first boot of the day in 10.9.1?
I'm running Mavericks from an external FW800 disk. When starting up for the first time each day, Safari bounces for about 60 seconds in the dock before opening. After that, it's very quick. I have only 4 extension installed, but turning them off doe
-
What SSD For Macbook Late 2007
Hi all. As a second Mac ive just bought a second hand Macbook 2.2Ghz Core2Duo late 2007 model odd a friend for a very reasonable price. Ive already ordered some RAM to max it out as it only has the stock 1GB and 160Gb HDD. to go with the ram i would
-
How to deactive my apple account
May i known how to deactivate my apple account, then i will create new account.