CRM PRODUCT BAPI + TABLES
Hi,
Can any one help me or give me some clue from where we can find all the Product related BAPI's in the CRM ?
Also give me the names of the Product related Tables in CRM Data base.
Points will be rewarded for helpful answers.
Thanks,
Samantak.
Hi Ankan,
Thanks for your prompt reply. But it would of great help if you provide some details about the CRM Product related BAPI's and the type of BAPI's available.
I have to write BAPI Wrapper with the help of existing BAPI's.
Thanks in advance.
Samantak.
Similar Messages
-
Hi all,
Can you please let me know tables related with products(created) in CRM.
Thank you and regards,
sprHi Shailaja,
The title was DYNPRO_NOT_FOUND.
the error message was..
The current ABAP program "SAPLCOM_PRODUCT_DETAIL_UI_2 " had to be terminated because one of the statements could not be executed.This is probably due to an error in the ABAP program.
The program had to be terminated.
and ask me to check the notes related with.
"DYNPRO_NOT_FOUND" C
"SAPLCOM_PRODUCT_DETAIL_UI_2 " or "LCOM_PRODUCT_DETAIL_UI_2O02 "
"SET_ALTID_EDITABLE"
I suppose there i made mistake regading making active or inactive while saving the product.
Also I cannot run COMMPR01 transaction code to check the product.
Thank you and regards,
spr -
Hi there,
I'm trying to get the details of the product catalog based on the product ID. What i'm trying to achieve is given the product ID, I want to find which category is this product under and what is the products ABOVE this category.
Any hints and help are much appreciated. Many thanks.
Regards,
Josh!You need to find the product hierarchy in which product cat is present to see whole tree.
Search with table PRDCATREL to find the categories of product.
for categoris: Search with PRDCAT* in SE16 or SE11.
Always you can click the F1->technical info on the field in SAPGUI.
Raj -
SQVI Report for SAP CRM Product Hierarchy and its Product
Hi
How to create a SQVI report for generating a list for SAP CRM Product Hierarchy which should show the outputs->Level 1, level 2, level 3 and level 4 categories and its products?
I tried COMM_Hierarchy table and Comm_product but not able to achieve this requirement.
or Is there any chance of getting related tables so that I could try more for this requirement.
In which table both product id and its category Id can be found?
PravinThanks DJ
Is there any possibility to get a report for product hierarchy in SQVI ?
say in SAP CRM system, the product category is maintained in COMM_HIERARCHY as
Parent category Id->
Level2 Category Id->
Level 3 Category Id->
Level 4 category Id ->
Product Id's
(I understood the link between Level 4 category id and product id with your info.) but not able to achieve the requirement fully.
Is there any possiblity to achive for generateing a report? -
How to fetch data for CRM Product Master
Hi,
I'm trying to write a report on the product master in CRM.
In our current setup, we have few Ztables attached to the Product Master tabs.
The key field linking the Ztables is
field name:FRG_GUID
component type COMT_FRG_GUID
description:SET GUID
I would like to know if there is any function module which reads the product master table based on Product_ID just like 'for example 'CRM_ORDER_READ'.( which gives all the GUID's based on Business Transaction Numbers)
I need this because I'm not able to match the Fragment_guid of many DB tables to each other.
Please help.
Regards
RasheedHi Pratik,
Thank you for trying to help me. I shall explain my scenario for better undestanding.
I'm creating a Product Master Report which is linked to several Z tables.I need to fetch the details based on the price group .
The structure of one of the Z tables is as below:
Field Name Component Type
.INCLUDE COMT_FRG_KEY
CLIENT MANDT
FRG_GUID COMT_FRG_GUID
.INCLUDE COMT_PRODUCT_ADM
VALID_FROM COMT_VALID_FROM
VALID_TO COMT_VALID_TO
UPNAME COMT_UPNAME
HISTEX COMT_HISTEX
LOGSYS COMT_LOGSYS
ZZ0010 ZMODELTYPE
ZZ0011 ZMODELDESC
ZZ0012 ZMODSALEABLEAREA
ZZ0013 ZMEAUNIT
ZZ0014 ZBUILTUPAREA
ZZ0015 ZCARPETAREA
ZZ0016 ZTERRACEAREA
ZZ0017 ZGARDENAREA
ZZ0018 ZBALCONYAREA
now the only way I can get the information from this table is if I get the FRG_GUID.
Is there any way where I can get all the FRG_GUID for the PRODUCT_GUID'S.
Regards
Rasheed -
Middleware: extended Material to CRM Product, EEWB needed?
Hi all,
If Material in ECC contains custom fields extended by EEWB to the MARA table, and these information are needed in CRM during replication, do I need to use EEWB to extend in CRM as well? (if yes, which table to be extended for product)
Or creating new attributes to the attribute set and assign it to CRM Product's set type will do?
Kindly advise.
cheers,
ginnieHi Ginnie,
You can create a new attributes to the attribute set and assign it to CRM Product's set type. But if you want to have the information in these Zfields in ECC to pass into CRM product master fields then you need to perform the below steps.
Configuration Tables TBE24 and TPS34 in ECC must be maintained for triggering the CRM Middleware download of data from ECC to CRM. In Table TPS34 the Process CRM0_200 contains the entry for CRM Middleware download of data.
1. Activate Customer Product by maintaining table TBE24 using transaction SM30
2. Maintain the Custom product e.g. ZPROD
3. Add the function module that the OPEN_FI function module can find for a Business Transaction Event (BTE) as an alternative to a standard function module by maintaining table TPS34 using transaction SM30
4. Create Function module for mapping in ECC. For e.g. Function Module ZSEND_PROD_TO_CRM handles mapping the custom fields to be transferred to the CRM system.
5. After this you should implement the source code to do the BAPIMTCS mapping to send the data to CRM.
6. Finally, you will need to implement a BADI PRODUCT_CUSTOMER2 in CRM, method MAP_R3_TO_CRM_MATERIAL which will map all of the custom fields from ECC into the Product Master in CRM.
Hope this helps!!!
Regards,
Chandrakant -
CRM Production was stoped suddenly and ECC orders to replicate in CRM
Dear Experts,
Greetings!!!.
Recently Because of Hardware Migration, CRM Production was stoped suddenly. and the orders are raised in ECC. directly.
Eg: in CRM YOR1 sales order for same they have created ZOR1 in ECC and are working. now i need to replicatie the orders which are created in ECC .
What will be the Customising settings and Middleware settings for the Same please guide us.
Thanking you in anticipation,
Regards,
Sany.You must maintain on R/3 system the table CRMPAROLTP (in SM30). Set the following parameters:
Parameter name 1: CRM_SCENARIO
Parameter name 2: INT_CHANGE_ORDER (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
Parameter name 3: ZOR1
Parameter value 1: A (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
And on CRM side you must maintain the same parameters in table SMOFPARSFA:
Key : R3A_SALES
Parameter name 1: INT_CHANGE_ORDER (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
Parameter name 2: ZOR1
Parameter value 1: A (e.g. for activating the scenario A for ZOR1 - check what you use for YOR1)
Ensure that the scenarios are maintained consistently in both systems (CRMPAROLTP and SMOFPARSFA) to avoid errors.
Regards. -
Unable to see sales area tab in CRM production client
Dear Experts,
I established middleware connectivity between CRM 2007(001) and ECC 6.0(200) Production Clients,
i maintained following settings
Used transaction code BUSD
and select the respective role and click on BP Role -> Subheader ID
Checked the entry 'CRM001 CRM: Sales Area Data' and even i checked the consistency is ok and active in org model.
But still I am unable to see sales area tab in the BP master In the CRM production client (001) .
Plz sugest what else i have to do to rectify this problem.
Regards
V.srinivasHi Chandra
We all ready done buffering.
We have executed report HRBCI_ATTRIBUTES_BUFFER_UPDATE,
and the scenario SALE is flagged as buffered in customizing table T77OMATTSC.
But still we are not able see the sales area tab in bp master.
Note : one thing we noticed when we selected the r3 reference customers when copied sales area into crm bp by using the tcode crmc_bupa_consum we are able to see the sales area tab.
But when we trying to create new bp by using role Sold to party we are not able to see Sales area tab in bp master.
Regards
V.Srinivas -
How to do the CRM Product Master Data extraction?
Hello guys,
I have to upload the CRM Product Master Data from a CRM 6.0 system to a BI 7.0 system.
The only information that I have is the infocube in the BI for the extraction is 0CRM_PROD.
I've checked that the CRM Product table COMM_PRODUCT and found that entries in the table and the infocube don't correspond to each other exactly. I also cannot find approprite DataSource in BI or CRM system for the data transfer.
Who can telll me anything about this kind of master data extraction to BI?
Thanks in advance.
Best RegardsHi,
u tried using the generic extraction using rso2.create one datasource and give the table name comm_prod.
bye. -
HI All,
I have a small doubt... In CRM what is the table name which has Product attributes like Product status, weather it is mark for deletion/ Inactive etc...
Thanks in advance
AbhinavHi,
The Status for CRM Products are available in the CRM_JEST table.
However, you cannot directly retrieve it.
You need to have the Product_guid from the comm_product table.
Using this Guid, you need to extract the STATUS_GUID from the COMM_PR_FRG_ROD table. You will get multiple GUIDS. To refine your search further, you need to pass on the SALES_ORG and DISTR_CHAN information. This will lead you to a single STATUS_GUID.
Use this Status GUID in the CRM_JEST table in the OBJNR field and you can get the status of the CRM Product.
Hope this helps. -
Transfer material type DIEN in ECC system to CRM product type Service
Hi Experts,
I have a requirement to transfer material type DIEN in ECC system to CRM product type Service.
How can we do this?Hi Viswanath,
I dont think its possible to replicate material type DIEN from ECC to CRM Service Product.
Service Products need to created in CRM, from here transfer to ERP. To transfer service product from CRM to ECC, you need to enable upload for Service Product in SPRO.
Customer Relationship Management -->
Master Data -->
Products -->
Settings for Product Type -->
Allow Upload for a Product Type.
Now here select the check box for product type 02(service).
To send product from CRM to ECC, open the product you need to send it to ECC in COMMPR01.
Go To -> Transfer to ERP. Here give the ECCRFC Destination and mapping material type.
//Bhanu -
In which screen the Profit Center field can be seen in SAP CRM Product Master?
Hi SAP Experts,
Please provide your valuable inputs on the below request:
1) Do we have profit center field in SAP CRM Product Master?If yes then in which screen can we see?
2) At the moment we are not using the profit center field in either of the systems(ECC and SAP CRM) in Material, we want to use this then how to go ahead to have this field in CRM.
3) If we add the profit center value in material master in ECC under general and plant data view then how this value will be replicated into SAP CRM , delta load or initial load?
We are using SAP ECC 6.0 and SAP CRM 7.1 systems.
Appreciated for your inputs at the earliest.
Best Regards,
SVHi,
Substitution Rule :-
Prerequisite :
1. WBS Level (PRPS-STUFE) = ' 3 ' AND Statistical Indicator (PRPS-XSTAT) = ' X '
Substitute
1. Profit centre (PRPS-PRCTR) - ' '
Hope this will clear you...
Regards,
Hari -
Determine of Tax Code for Country/Product Category - Table handling
Dear Experts,
in SRM 7.0, CS, i am facing the following requirement regarding tax codes:
We have users from different countries using SRM. These different countries have different tax codes that are to be used for legal reasons.
My question is, how i can achieve a system behaviour, by which in the shopping cart, the correct tax codes gets selected automatically, based on the country of the user, who is creating the shopping cart.
Question 1:
Is it correct to assume, that this requirement can be achieved by maintaining the "Determine of Tax Code for Country/Product Category" - Table?
Q2:
What is the purpose of the 1st column of the above mentioned table, "Domestic/International Indicator"? Can it be left blank?
Q3:
Is it possible to fill in the values for the field "Country" BUT to leave the field "Category ID" empty???The reason for asking it, that otherwise several hundreds entries would have to be maintaind manaully...
Q4:
From where in the shopping cart or ppoma settings is the system fetching the Country code, in order to be able to use it in the table? Is there any specific attribute maintenance that has to be taken care of, so the above mentioned table can be used (e.g. delivery address, including the country information)?
Thank you very much for your help in understanding the topic.Hi
Here are my responses to your questions:
Question 1:
Is it correct to assume, that this requirement can be achieved by maintaining the "Determine of Tax Code for Country/Product Category" - Table?
Answer - If you have a requirement where different countries have different tax codes, then you do need this confiugration. Otherwise Configuraiton in Enter Tax Code are sufficient.
Q2:
What is the purpose of the 1st column of the above mentioned table, "Domestic/International Indicator"? Can it be left blank?
Answer - Sometimes you have different codes for International and Domestic purchases for a product Category. IN those situations you can select Domestic/International field to differentiate btw tax codes. Otherwise this field can be left blank
Q3:
Is it possible to fill in the values for the field "Country" BUT to leave the field "Category ID" empty???The reason for asking it, that otherwise several hundreds entries would have to be maintaind manaully...
Answer - No, if you enter country, then Category Id field is mandatory. You may enter * in case you dont have multiple backend systems. otherwise you will ve to ve individual entries for each category and backend system.
Q4:
From where in the shopping cart or ppoma settings is the system fetching the Country code, in order to be able to use it in the table? Is there any specific attribute maintenance that has to be taken care of, so the above mentioned table can be used (e.g. delivery address, including the country information)?
Answer - It is picked up from the address of the user where is will receive goods. and Domestic/International will be decided based on Vendor address with reference to thta address.
I hope my responses clarify your doubts.
Regards
Virender Singh -
How to populate multiple entries to Bapi Table
Hi all,
How to populate multiple entries to Bapi Table.....
Here is the code(in component controller)
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
int size = wdContext.nodeApplicants().size();
for(int i = 0 ; i < size ; i++)
String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
if(isselected == "true")
com.models.veteranpoint.Zrecr_Aplno appid = new
com.models.veteranpoint.Zrecr_Aplno();
appid.setAppl_Number(wdContext.nodeApplicants().
getApplicantsElementAt(i).getAppl_Number());
request.addApplicants(appid);
I want to pass the selected input field to bapi..
Please tel me where i pass the input field...
Please correct my code...
Thanks & regards
Mathi sHi,
Steps to insert multiple entries to BAPI table.
1.Create an instance for BAPI input
2.Bind the instance to the Node of the BAPI input
3.Create instance of the Structure(BAPI table) to which input has to be added.
4.Set the input values to the Structure instance.
5.Add the instance to the BAPI input.
6.Execute
From the given example,I assume Z_Recr_Apply_Point_Input is the BAPI Input and com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno as Structure
Step 1:
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
Step 2:
<b>wdContext.nodeZ_Recr_Apply_Point_Input.bind(request);</b>
Steps 3 & 4:
int size = wdContext.nodeApplicants().size();
for(int i = 0 ; i < size ; i++)
String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
if(isselected == "true")
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno appid = new
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno();
appid.setAppl_Number(wdContext.nodeApplicants().
getApplicantsElementAt(i).getAppl_Number());
<b>wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().addRecr_Aplno(appid);</b>
Step 5:
<b>wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().execute();</b>
Regards,
Viji Priya -
Hello CRM Experts,
We have assigned survey to Transaction ( Activities , Lead , Opportuninity ) . Transaction is being created and Questionnaire ( Survey ) is filled . Then Transaction is saved . Transaction ID is generated . We want name of the Table in which survey Results (answers) are store.
As we get the tables for Questions of surveys.
We not able to find the tables where all surveys Results (i.e may filled by Business Partners,Users etc) are store.
Please suggest.
Regards.
Anup.HI Anup,
The list of all tables used in surverys are as follows
CRM_SVY_DB_MT CRM Surveys: Media Type
CRM_SVY_DB_MTT CRM Surveys: Media Types (Text Table)
CRM_SVY_DB_S CRM Surveys: Survey
CRM_SVY_DB_SA Survey Applications
CRM_SVY_DB_SAD CRM Surveys: Survey Application Descripti
CRM_SVY_DB_SD CRM Surveys: Survey Description
CRM_SVY_DB_SET CRM Surveys: Text Table for CRM_SVY_DB_SE
CRM_SVY_DB_SEV CRM Surveys: Input Help Table for Function
CRM_SVY_DB_SFA CRM Surveys: Survey File Access
CRM_SVY_DB_SP CRM Surveys: Generic Survey Attributes
CRM_SVY_DB_SSC CRM Surveys: Survey Schema
CRM_SVY_DB_ST CRM Surveys: Survey Template
CRM_SVY_DB_STS CRM Surveys: Survey Transformation Select
CRM_SVY_DB_SV CRM Surveys: Assessable Survey Values
CRM_SVY_DB_SVS CRM Surveys: Survey Values
CRM_SVY_DB_SVT CRM Surveys: Survey Value Template
Thanks
Abishek
Maybe you are looking for
-
Hi i'm trying to build my first web site using Dreamweaver MX. Could anyone please point me in the right direction
-
Re: Does Pick Up at store by friend really need the physical credit card used?
Hi, i want to pay with credit card from Argentina and a friend will pick up at the Miami's Store. It's posible?
-
I need Firefox to provide an update to resolve the bookmark problem. I tried some of the tips to no avail. firefox is the expert. Please do what is necessary.
-
How can I decrease my font size in mail? I have it set to small and yet it is enormous, letters running into one another. I have rebooted and more. Something is over riding my setting. Any suggestions?
-
Photos, pictures not loading
Using Apple's photo app many pictures are not loading, also showing grey in preview. When closing by two finger movement they shortly show up and are visible after second opening. Movies however not. It appears especially with pictures taken by ipad,