CRM - SAP ECC 6.0- How to keep creation user data

Hello gurus,
I'm working on a SAP project which scope is CRM - ECC6.0 (IS-U +SD) - BI 7.0 and we are facing an issue trying to extract from IS-U the user who created a business operation.
You have to know that process designed is :
- business operation is created in CRM (as for business partner, contract account ...) by a user A.
- business operation is replicated from CRM to IS-U
- Communication user set up is called RFCUSER.
So that every business operations created in CRM, is created in IS-U and get mentioned in user creation area : RFCUSER instead of user A.
Similarly when an business operation is modified from ISU to CRM, the modification user is RFCUSER.
This is an issue when we try to know which user has created this business operation in ISU. We must go in CRM to read data.
So I want to konw if it's possible to change the communication user (make every user a communication user. It seems to be the worst solution, or if we can change bdoc structure exchange to keep creation user data, or if a customizing exists to solve this issue).
Thanks in advance for your answers.
Jacques Toubon.

Hello
Please give me suggestions on prerequisites for upgrade.
Start with these SAP notes and the guide.
https://websmp208.sap-ag.de/~sapidb/011000358700001228732011
1566412 - Enhancement package 6 for SAP ERP 6.0: Required SWC
1496212 - EHP6 for SAP ERP 6.0 SP stacks - Release & Information Note
1598141 - SAP Enhancement Package 6 for SAP ERP 6.0:Compatible Add-ons
1.How can we decide it is one step proces or two step process?
Upgrade from EHP4 to EHP6 is a single upgrade.
Bear in mind that EHP6 needs a higher version of OS and DB.
Please check PAM for supported OS and DB for EHP6
2.can we skip shadow instance creation step??
Download the SUM guide and read the chapter "Preconfiguration Mode Planning" and the "Current Capabilities" section. Here is the SUM guide for SAP on Unix with Oracle.
https://websmp208.sap-ag.de/~sapidb/011000358700000783532011E
There are different upgrade scenarios. The section "Recommendations for Choosing the Preconfiguration Mode" explains the use of each mode and the mode you should select.
3.can we copy sum tool in /usr/sap/sid/sum??
Yes you can. But I suggest you to create a new file system called /usr/sap/SID/SUM for the upgrade purpose instead of creating a directory called SUM under /usr/sap/SID file system.
Regards
RB

Similar Messages

How to recover backup user data after a restore

I had a disk fail and could not boot. while in the restore software I was able to backup user data to a USB drive. Now that I've restored from the restore partition and got it running windows 7 home again, I don;t see how to recover the user data made with the low level software. Windows back up doesn't seem to recognise it and I can't find an HP utility to get at it.
A program saved with the .wim back up files brought up an HP restore manager application that then copied the filed to my new C drive but how do I actually get it to recover them into their appropriate places and recreate users etc.
Or, should I just consider myself lucky to still have copies of the files at all? I'll not be real happy about that because it will be a tom of work to recreate everything manually even with the files.
I'm hoping someone out there has a better solution for recovering all my user data into my new restored initial image.
thanks,
-dcb

Hello dcbrower, You may be able to use the program Universal Extractor to extract the files in the .wim file.
This is a Free program that can be found at this Link. .
Just extract the files in the wim file to a location you would like.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

ITunes installed on a new drive with music on an old drive: how to keep the music data?

I had iTunes installed on my old HDD with all my music on it. It was the drive C:\
I just installed a new SSD (now the C:\ drive) in my computer. I also installed iTunes on it. I want to leave my music on my old HDD (now the G:\ drive). I can scan with iTunes for my music on my old G:\ drive, but that means I won't have the star ratings nor the play count...
I tried to copy and paste the iTunes Library.xml from my old G:\ to my new C:\. When I opened iTunes, it had all my music and the data, but I had to locate manually every single song (in a 7000+ songs library, this is a bit of a problem).
Is there a way to edit the iTunes_library.xml file to change the path of every song in it (from C:\ to G:\) since this seems to be the issue? Or how could I keep my music on my G:\ drive and itunes on my C:\ drive while keeping my music data?
Thank you!
Specs:
Windows 7 sp1
SSD: Plextor M5P 256G

Hello papapavvv,
Thank you for providing so much information about what is going on. It sounds like you have your iTunes Library on your G:\ drive, but it sounds like iTunes is not opening iTunes Library.itl file on the external drive. Follow these steps to point iTunes to your G:\ drive:
Steps to create or choose a different iTunes Library file
If iTunes is running, quit iTunes.
If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
You should see the following screen:
Additional information
If you do not see the screen above, then you did not hold the correct key at the correct time. You may want to try again. Note that if you pinned iTunes to the Start menu programs, and open it that way, it may not work.
Once you select "Choose Library," you will need to navigate to the iTunes Library.itl file on your new external drive.
You can find the full article here:
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/ht1589
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to keep e-mail data from being removed from the hotmail server when delelted from iphone IOS5?

Every time I delete any hotmail messages from my i-phone it is deleted from my hotmail account on the web. Any sugestions how to keep this data on the server and deleting it from iphone?

Yes, (but I don't know why you would want to do it this way...). Set up hotmail on your iPhone as a POP3 account.
Go to Settings > Mail Cont, Cal > Add Account > Add Other > Add Mail...
Fill the details in and as for the server info, use this website

Is there any Data Mapping document Between S&OP ( model that uses supply planning operator ) and SAP ECC that I will help the client in Data Mapping activity.

Hello All,
Is there any Data Mapping document Between S&OP ( model that uses supply planning operator ) and SAP ECC that I will help in Data Mapping activity.
Thanks,
Mownesh

There are standard templates in HCI data sources.
e.g. 1) Customer Master data template is SOP_MD_CustomerMaster for extracting master data from SAP ECC and load it to S&OP
KNVP is the table for customer in ECC from that you can select the fields as required
KUNNR for customer Number
ADRNR for Address
List of a few commonly used table names of ECC:
Product Related:
MARA – Material Master (MATNR)
MARC – Material Master with Plant Data (MATNR, WERKS)
MARD – Material Master with Storage Location Data (MATNR, LGORT, WERKS)
MAKT – Material Master Material Descriptions (MATNR, MATKL)
MBEW – Material Valuation Data (MATNR, BWTAR)
MVKE – Material Master : Sales related Data
MDKP, MDTB – MRP related Data( Header, Item)
MCHA, MCHB – Material Batches (Header, Item) (MATNR, WERKS, LGORT, CHARG)
Vendor/Supplier related:
LFA1 – vendor data (LIFNR)
LFB1 -- Company Code Segment : Vendor Data(LIFNR, BUKRS)
LFC1 -- FI Related Vendor Data (LIFNR, BELNR)
LFM1 – Pur. Orgn. Related Vendor Data (LIFNR, EKORG)
PReq/PO, BOM Related:
EBAN – Pur. Req. Data( BANFN, BNFPO, BADAT, MATNR)
EINA – Purchase Info. Record(General Data)(INFNR, MATNR, LIFNR)
EINE – Purchase Info. Record (pur. Orgn. Data) (INFNR, EKORG)
ELBK, ELBN, ELBP – Vendor Evaluation Related Data
EKKO – PO Data (Header) (EBELN, BSTYP, BSART)
EKPO – PO Data (Item) (EBELN, EBELP, MATNR)
Pur. Req., RFQ and PO are differentiated by Doc Type (BSTYP) in EKKO table.
For RFQ it is ‘A’ and for PO it is ‘F’
MKPF – GRN Data (Header) (EBELN, BLDAT, BUDAT, XBLNR, BKTXT)
MSEG – GRN Data(Item) MBLNR, BWART, LIFNR, MATNR, EBELN)
Apart from this there are lot of tables which begin with ‘M’ & ‘E’, but we
use the following very often.
EQUK – Quota (Header)(QUNUM, MATNR)
EQUP – Quota (Item) (QUNUM, QUPOS, LIFNR)
EKBE – PO History Data (EBELN, EBELP, BELNR, BLDAT, MATNR, VGABE)
EKBZ – PO History with Delivery Costs(EBELN, BELNR, LIFNR, XBLNR)
EKET – Schedule lines data of a PO(EBELN, EINDT, SLFDT)
EKES – Vendor Confirmations Data (EBELN, EBTYP, EINDT, XBLNR)
T163F – Confirmation Texts (EBTYP, EBTXT)
T156 – Movement Types (BWARE)
T024 – Purchasing Groups
T024E – Purchase Organizations
T163 – Item Category’s in Purchasing Documents(PSTYP)
T149D – Valuation Types
T134 – Material Types
FVLK – Delivery Types
STKO, STPO – BOM(Bill Of Material) related Data (Header & Item)
STPU, STPN, STST, STZU – BOM Related Tables
RKPF, RBKP, RSEG (Header & Item) – MM – FI Related Data
KONO, KONH – Pricing data
T006 – Basic Unit Of Measurements
Customer/Sales Order Related:
VBAK : Sales Document(Header Data) (VBELN)
VBAP : Sales Document(Item Data) (VBELN, POSNR, MATNR, ARKTX, CHARG)
Enquiry, Quotation, Sales Order are differentiated based on Doc.
Type(VBTYP Field) in VBAK, VBAP Tables for Enquiry VBTYP = A, for Quotation ‘B’ & for Order it is ‘C’.)
LIKP : Delivery Table(Header Data) (VBELN, LFART, KUNNR, WADAT, INCOL)
LIPS : Delivery Table(Item Data)(VBELN, POSNR, WERKS, LGORT, MATNR, VGBEL)
(LIPS – VBGELN = VBAK- VBELN, LIPS-VGPOS = VBAP-POSNR)
VTTK : Shipment Table(Header Data) (TKNUM)
VTTP : Shipment Table (Item Data)(TKNUM, TPNUM, VBELN)
(VTTP – VBELN = LIKP – VBELN)
VBRK : Billing Table(Header Data) (VBELN, FKART, BELNF)
VBRP : Billing Table(Item Data) (VBELN, POSNR, FKIMG, NEWR, VGBEL, VGPOS)
(VERP – AUBEL = VBAK- VBELN, VBRP – VBEL = LIKP – VBELN)
Apart from these tables there are lot of other tables which starts with ‘V’, but we use the
following tables frequently.
VBUK: All Sales Documents status & Admn. Data(Header) (VBELN, VBTYP)
VBTYP = ‘C’ (Sales Order) VBTYP = ‘L’(Delivery) VBTYP = ‘M’(Invoice)
VBUP: Sales Documents status & Admin. Data(Item) (VBELN, POSNR)
VBEP : Sales Document Schedule Lines Data (VBELN, POSNR, EDATU, WMENG)
VBKD: To get sales related Business data like Payment terms etc.(VBELN, ZTERM)
VBFA: Sales Document flow data(VBELV, VBELN, POSNV, VBTYP)
VBPA: Partner functions Data(VBELN, PARVW, KUNNR, LIFNR)
TVLKT: Delivery Type: Texts(LFART, VTEXT)
KNA1, KNB1, KNC1 : Customer Master Data and Other Partner’s Data(KUNNR,
NAME1,LAND1)
KNVK: Customer Master Contact Person(PARNR, KUNNR)
KNVV: Customer Master Sales Data.
LFA1, LFB1, LFC1: Vendor Master Data(To get Transporter data)(LIFNR, NAME1, ORT01)
MARA, MARC, MARD : Material Master Data(Basic, Plant, St. Location Views)
TVKO: Sales Organizations(VKORG)
TVKOV: Distribution Channels(VTWEG)
TVTA: Divisions(SPART)
TVKBZ: Sales Office(VKBUR)
TVBVK: Sales Group(VKGRP)
T077D: Customer Account Group(KTOKD)
T001W: Plants(WERKS)
T001L: Storage Locations(LGORT)
TWLAD: To get address of Storage Location and Plant(LGORT, ADRNR)
TVAU: Sales Document (Order) Types
KONV: Condition Types (pricing) (KNUMV, KSCHL, KWETR)
T685T: Condition Types Texts.
ADRC: To get Addresses of Partners
VBBE, VBBS: Sales Requirements Data
VBKA: Sales Activities Data
VBPV: Sales Document Product Proposal
Based on the functionality you can search ECC table names and fields
Hope this information is helpful for you.
Thanks and Regards,
Anjali

How to fetch Portal Users data ? (Including Mapping details)

Hi all,
I want to retrieve Portal users data with the detail of its mapping (i.e. if the user is mapped or not with backend user? and if yes, to which backend user?).
Thanks,
Tejas

Thanks for the reply Nadav.
But what I want is the complete list of all the users, the reason being there are more than 2000 users on Portal and going for this one by one mapping checking is not really feasible time and effort wise.
So is there any way how can I get the users data from UME or LDAP? as I have both kinds of users.
Please guide.
Thanks and Regards.
Tejas

How to transfer microsoft user data to computer

I went into best buy and they backed up all my info on a disc and i put the disc in and i have retrieved some of my stuff but cant figure out how to get the "microsoft user data" back on my computer which is all microsoft word power point, office etc how do i do this?

Drag the Microsoft User Data folder into the /Home/Documents/ folder.

How to manually migrate user data under Mountain Lion?

I want to manually migrate my user data from a cloned back-up to my iMac after a clean install of Mountain Lion. I do not want to use Migration Assistant because of the probabily of re-importing some of the problems I'm trying to fix. (This is at the tail end of a long trouble shooting process trying to fix a very very slow computer aftere a ML upgrade from Lion. Clean install of ML is a last resort)
There used to be an excellent list by Kappy (I think) on this sort of migration under earlier systems and from PPC to Intel. But that link seems to have been taken down.
We plan to reinstall all software from scratch after the clean install, so that is not an issue. And I know how to move the normal files in documents, music and the like. I am most concerned about are:
• Making sure I move the right files/folders in the Library related to Apple apps like iTunes, iPhoto, Address Book, Calendar, iWork apps, iPhone backups, etc. plus system/network settings.
• Are there other specific files/folders necessary due to iCloud that are new to Mountain Lion that need moved?
• How to do this in a way that ensures that all permissions will be OK under the new user?
The goal is a new fresh user on a clean fresh ML install that is identical to the current user in name, function and above all, permissions.
Can anyone provide a list of the main files/folders necessary to transfer ideally along the lines of Kappy's earlier and excellent guide?
Thanks for any help!!
~Roger

So long as you use iCloud for Mail, Contacts and Calendars, run software update(s) after installing each app, they will build new preference files for themselves. iTunes will back up the phone too. System settings are likely to change. I found the firewall off and energy saver preferences default. Trackpad options for tap to click and drag lock may change.
Some of the updates are quite large so it takes a few hours and you need any purchase key codes handy for re-registration of software.

How does firefox guarantee User data privacy and protection?

As I understand Firfox Sync Service will store user data on its personal servers, i have 2 doubts then -
1: If a user stores his passwords to Firfox server and there is a security breach on that server and User's private data has gone to wrong hands then who would take responsibility of such incidence?
How secure is the server that firfox uses in general !!
2: Once this data store grows in size, Firfox would have to use better and reliable technology, that comes with a cost tag, so would Firfox start charging those users who have no idea of this right now?

With only the password it is impossible to read the data that is on the servers since the data is encrypted. The data is encrypted on your computer before it is sent to the Mozilla servers, and if downloading the data from Mozilla it is decrypted on your computer. To encrypt and decrypt the data the secret phrase is required, and that is on your computer.
As far as I am aware Firefox sync will always be free.

Integrating with SAP CRM / SAP ECC apps with SMP 3.0

Hi All,
I have some questions for integrating SAP ERP / SAP CRM applications with SMP 3.0, what my questions is
1) I want integrate SAP ERP / SAP CRM apps with SMP 3.0 from scratch. (which are available in the SAP Portal)
2) For that what are all the per-requisites, after integration is done if application want required any changes then how to update that app.
3) Provided SAP ERP / SAP CRM applications are all available executable only, is there any source are available for all theat apps.
Some of SAP ERP applications SAP ERP Customer Order Entry, SAP ERP Order Status, SAP ERP Quality Issue, SAP Employee Lookup and etc.. and
Some of SAP CRM applications SAP CRM SALES, SAP CRM SERVICE MANAGER, SAP Customer and Contacts, SAP Customer Briefing, SAP Customer Financial Fact Sheet, SAP Customer Loyalty, SAP Direct Store Delivery and etc... which are all available in the SAP Portal.
Please help me on the same.
Thank & Regards,
Ranjith Lingala
+91-9985241328

Hi All,
I have some questions for integrating SAP ERP / SAP CRM applications with SMP 3.0, what my questions is
1) I want integrate SAP ERP / SAP CRM apps with SMP 3.0 from scratch. (which are available in the SAP Portal)
2) For that what are all the per-requisites, after integration is done if application want required any changes then how to update that app.
3) Provided SAP ERP / SAP CRM applications are all available executable only, is there any source are available for all theat apps.
Some of SAP ERP applications SAP ERP Customer Order Entry, SAP ERP Order Status, SAP ERP Quality Issue, SAP Employee Lookup and etc.. and
Some of SAP CRM applications SAP CRM SALES, SAP CRM SERVICE MANAGER, SAP Customer and Contacts, SAP Customer Briefing, SAP Customer Financial Fact Sheet, SAP Customer Loyalty, SAP Direct Store Delivery and etc... which are all available in the SAP Portal.
Please help me on the same.
Thank & Regards,
Ranjith Lingala
+91-9985241328

How to keep the real data if number length bigger than 15 in excel format

i have a bank card number column in report, the data type is varchar , and the data is always number , the length is bigger than 15, now if i download the report as excel format, this column's data will alwasys change to something like "5.41321E+17", and due to this, i just format this column to custom=0, but all data will change the last number to "0" like "460025198509180000", this is what i do not wanted.
how to solve this problem? thanks in advance
Kaymo
Edited by: user10740102 on Jun 11, 2009 1:23 AM

it's because Excel is thinking that it's a number....try changing the formula for the column from Table.ColumnName to the following
'"'||Table.ColumnName||'"' (or use CONCAT - it's the same)
This will show quotes and when you download to excel - it'll drop the quotes and keep the number

I need to reinstall the LinuxO.S. on the main Sync Computer, how to keep safe the data and transfer them on the new installation?

Simply I need to reinstall the Linux O.S. on the main FIrefox Sync computer, changing distro.
I would like if it is possible to recreate the same Main configuration on the new Firefox installation without loosing all the stored Sync data and keep synchronized all the others PCs.
How can I do that?
Thanks
Marinerdrums

Yes, Firefox SYNC keeps your data in Firefox Server, and copy in your system
For more
*https://support.mozilla.org/en-US/kb/how-do-i-manage-my-firefox-sync-account
*https://support.mozilla.org/en-US/kb/firefox-sync-take-your-bookmarks-and-tabs-with-you
*https://support.mozilla.org/en-US/kb/how-do-i-set-up-firefox-sync

How to keep 2 users seperate

Hi all
Both me and the missus now have ipods but it is proving a chore manually sorting out the albums for each other
when either ipod is connected the same library comes up, so if i only want to add some songs to mine i have to then copy them manually to my ipod again before i sync it
Is there any way to have 2 seperate accounts which are totally seperate? i.e. tracks and playlista re not available to both of us so i can just put evrything into the library and sync it
Message was edited by: dale_moseley19

When the iPods belong to different people, there are basically three ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library
b) Creating Multiple Libraries in a single user account
c) Creating multiple user accounts.
Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
Sharing a Library and/or User Account
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish): Loading songs onto iPod automatically - Windows
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
Loading the iPod shuffle differs slightly but it can still be used with the others, for details have a look at this page: Loading songs onto iPod shuffle - Windows
Multiple Libraries
It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Option key (or Shift key in Windows) when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library: Using multiple iTunes libraries -Windows
Separate User Accounts
Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out. You can read about Windows user accounts here: Using Windows XP User Accounts

How to keep Firefox profile data on SD card?

My Sony Xperia ZR is running out of internal memory. One of the culprits happens to be Firefox which seems to be occupying around 350+ MB of space.
I have a separate SD card and wish to either move Firefox completely to it or at least move the profile data to it so that it frees up space.
How do I do it?

How to override this security setting?
I am not that concerned about security. I would rather have some usable free space in my internal memory.
This will be felt very badly in devices with low internal memory.

How to keep up to date with Sun Application Server 9.1

Hi All: I'm just starting out deciding between Tomcat and Sun Application Server 9.1. Is there a patch number on SunSolve so I can keep the product up to date with any fixes?
Any comments on which way to go for this for .war applications that do not have EJBs?
Thanks,
Rich

Hello,
recently I upgraded from Sun AppServer 9.1 U1 to U2. I downloaded Glassfish V2 U2, what is equivalent to AppServer 9.1 U2. Installing this download there is an option to upgrade the domain of an existing installation of the AppServer.
This worked pretty well.
Bernd

CRM - SAP ECC 6.0- How to keep creation user data

Similar Messages

Maybe you are looking for