Crm survey suite extractors into BW

Does anyone know whether there are some Business Content extractors for the survey data in CRM. My CRM colleagues have setup surveys using the CRM_SURVEY_SUITE transaction and it would seem to store at least some of this data in the table CRM_SVY_DB_SVS, but not all. However I cannot find any standard extractors to extract all the survey data.
There are extractors for the web survey stuff but the CRM_SURVEY_SUITE transaction does not appear to be a web survey.
Any help would be much appreciated on this.
We are using CRM 4.0 with BW 3.5
Thanks
David

Hi!
you can find survey datasources under RSA5 Root->CRM->0crm_SURVEY. these are some datasources
0SVY_ANSWER_TEXT     CRM Survey: Answers
0SVY_APPL_TEXT       CRM Survey: Applications
0SVY_DATA_1          CRM Survey: Results
0SVY_QSTNNR_TEXT     CRM Survey: Survey Header
0SVY_QUEST_TEXT      CRM Survey: Questions
0SVY_STATUS_TEXT     CRM Survey: Status of Question
0SVY_SURV_TEXT       CRM Survey: Campaign Texts
0SVY_TAROBJ_ATTR     CRM Survey: Recipient Attributes
and web survey datasources under PI_BASIS->0CA_SUR
0WS_ANSWER_TEXT    Web Survey: Reply
0WS_APPL_TEXT      Web Survey: Applications
0WS_KFIGTYP_TEXT   Web Survey: Key Figure Types
0WS_QSTNNR_TEXT    Web Survey: Questionnaire
0WS_QUEST_TEXT     Web Survey: Questions
0WS_STATUS_TEXT    Web Survey: Question Status
0WS_SURVEY_TEXT    Web Survey: Survey
0WS_TAROBJ_ATTR    Web Survey: Recipient
0WS_TAROBJ_TEXT    Web Survey: Recipient
hope it helps
with regards
ashwin

Similar Messages

CRM Survey Suite - BW extraction

Dear all,
I have created a survey in CRM survey Suite,
By which business content info providers, i can see the results of my survey?
Thanks in advance..
jmq

HI,
crm survey suite extractors into BW
Re: crm survey suite extractors into BW
Thanks
Reddy

CRM Survey Suite and Web Survey

Hi everyone,
I am new in CRM and have been assigned to investigate the possible ways to send surveyes to the customers/users.
In my investigations and readings, I have found that we coud use CRM Survy Suite or Web Survey.
Could any one please tell me what the difference is between the two?

Hello,
AFAIK only the CRM Survey Suite is fully integrated into the CRM Campaign management. I think the easiest way to send surveys to customers and users is a mail form which sends out a personalized link to the survey.To make the survey available in the internet your basis admins have to configure the SAP Web Dispatcher as I've described in my Blog <a href="/people/gregor.wolf3/blog/2005/11/07/setup-sap-web-dispatcher-with-url-filter-on-suse-linux-90">Setup SAP Web Dispatcher with URL Filter on SuSE Linux 9.0</a>.
Regards
Gregor

How to set value for radio button in sap crm survey suite

Hi ,
I created a survey in CRM Service, in which I added a question with answer as '10 Selection Button Group ('radio button'). And answer has 11 answer options (which means 11 radio buttions). Now when we test the survey, the value for the radio buttons is appearing like 'id_0050569b03091ee480a29d8ee61e953c'. But i want to set a specific value for each radion button (from 1 to 11). So, how to set value for radio button in sap crm survey suite???.
Thanks & Regards,
Seshu

Hi,
I found solution myself. Click on Goto -> Editing Mode -> Expert Mode. Now you can set value for radio button.
Regards,
Seshu

CRM Survey Suit

Try to generate URL from Survey Suit,i cant see
any value in "GetFile = ??" and "SendFile=??" This has to be in this format
Get File: CRM_SVY_BSP_xxx_yyy.XML (xxx,yyy being the current CRM system name)
Send File: CRM_SVY_BSP_xxx_yyy.XML (xxx,yyy being the current CRM system name)
Where in the BSP this has to be configured. Another question is where this XML for page is stored.
Thanks

Hi guys,
where i can get the result, the answer of the survey i save in the bsp page¿? Once i fill the web survey i press the button 'send', later it appears a sucessful message, and an url of this type:
http://my.system:port/sap(bD1lcyZjPTMwMA==)/bc/bsp/sap/crm_svy_server/Result.htm?sap-params=c3Z5X2Nvb....
What is the next step? What i have to do with this? any table with the answer¿?
Regards and thanks in advance..
Mon
Edited by: Mon on Apr 3, 2008 10:51 AM

CRM Survey Suite - Validate fields with custom Java Function

Hi all,
Does anybody now how to validate the survey fields when pressing a custom button and before submitting it to the CRM database?
If I add a custom field, it appears in the html as:
<a onMouseOver='return true;' href="javascript:void(0)" onClick="return htmlbSL(this,2,'SUBMIT:SUBMIT')" class="sapBtnStd" id="CHECK_VALUES">CheckValues</a>
Which makes impossible to handle the event with a client side function defined in java script in the html code.
I've tried to setup the EXAMPLE_DYNAMIC_SURVEY, but I wasn't successful.
Any tips?
CRM5.0
Regards,
Dora

FYI
Note 945112 "Addition of Javascript validation to onSubmit event" was created.

CRM Survey Suit - Questionnaire

I created a questionnaire and then translated it into German, Spanish and French. I then activated the translations. I now need to add additional questions/answers to the survey. Is there a way to change the English version but not lose the translations? Every time I copy the survery in the original language it is losing the translations. I've tried to create a new verison but it did not create with the translations either.
Any help would be appreciated.

Hi Marianne,
I think you must use a walkthrough and when adding new answers you copy them as a new name so you can maintain the original translations, if you find any other way please send us the details.
Regards,
Pedro

CRM Survey Suite: Replace Text after submitting the survey

Hi Experts,
i have a question concering crm_survey_suite (I use surveys in web scenario). When I submit a survey I get a message like: "Your request is being processed". Actually I'd like to change this text, but I can't find the coding that is responsible for the message. Any ideas where to find it? Points will be rewarded!
Thanks & Regards,
Rainer

Hi,
The message -Your Request is being processed" is a standard SAP message and is not specific to Survey.
As per standard behaviour everytime you save some data on WebIC or request for some data to be displayed on the UI, it displays this message and after the save is complete or the data is fetched , this messages is replaced by other suitable message.
If you try to change this one it will be change at all places.
Would you still like to proceed with this
Hemant

CRM SURVEY SUITE + Dynamic Components

Hi, all !
There are a lot of useful functionality described (http://help.sap.com/saphelp_crm50/helpdata/en/2c/2ddf3ac9ecc11de10000000a11402f/frameset.htm).
But, unfortunately, a lack of knowledges HOW to realise this features. In particular, i'm interested in such features as:
-- 1. Term replacement (You can personalize surveys by adding a greeting text and the name of the recipient, for example, Hello Mr. Smith).
-- 2. Merge Java script (to check that appropriate data has been entered, this avoids inappropriate data being stored on Web sites, databases and tables).
It seems to be very useful in marketing and customer loyality investigations.
If anybody shares any information regarding above-mentioned things I will appreciate very much.
Thank you in advance.

Hi Vasil,
As far as your first query of maintaining personalized surveys is, the option available is to create a personalized mail formm which can be send to the users. While creating this mail form using the tx code CRMD_EMAIL. Here you can enter the attributes like First Name, Last Name. Also conditions are available to send separate mail forms for Mr or Miss. and you can provide your survey link for the same. Thus you can have personalized surveys conducted.
Hope this will help your understanding.
Reward Points if of any help!!!!!!
Regards,
Rekha Dadwal

CRM survey suite - Test URL - Blank Screen

Hi All,
I generated the URL for a survey but when when I try to test it gives a blank screen.
The system I am testing is a system copy of another system. In the source system the URL works fine.
I have made changes in the xml file to point to the correct host, client and port number.
Could someone please help.
Thanks
S.

Hello Shabnam,
I faced a similar problem and this is the solution after which the URL starts working is as follows:
Refer note: 857535 and do the following:
TCode: se24 -- CL_SURVEY_CATSERVER
Execute method SET_CATSERVER_ABAP
Leave parameter USER empty.
Now check the survey URL will start working.
Regards,
Khushboo
Do reward points !

CRM Survey Suit Tables

Hi Experts.
Can anybody tell me survey tables because I want to generate report for the Questioners that have been designed by using survey builder.
I am trying to design the survey reports by using Query.

CRMD_SURVEY and CRM_SVY_DB and check by SVY in SE11

CRM - survey suite - XML files - descriptions

Hi,
would it be possible to add some more documentation
to page:
http://help.sap.com/saphelp_crm40/helpdata/en/e2/5756cb769ae745aa2f5ca5ff95d63c/content.htm
about XML configuration files ?
for http, https, scenarios?
there are quite a few parameters like: ConnectorId
which are not described anywhere
and certainly it would make life
much easier if we could read something
about them
Regards,
michal

Hello Shabnam,
I faced a similar problem and this is the solution after which the URL starts working is as follows:
Refer note: 857535 and do the following:
TCode: se24 -- CL_SURVEY_CATSERVER
Execute method SET_CATSERVER_ABAP
Leave parameter USER empty.
Now check the survey URL will start working.
Regards,
Khushboo
Do reward points !

Survey Suite Results

Helloz SAP Experts,
I had created Survery using Survey Suite and i had attached the survey in the Emailer as an Attachment and i had mailed across to 2 Business partners for testing and when then cilck on "SAVE"(execute) push button i am receiving a link which is mentioned below
svyApplicationId=CRM_SURVEY_MARKETING&SurveyId=TEST_SURVEY&svySurveyId=TEST_SURVEY&svyVersion=0000000001&SchemaVersion=1&svySchemaVersion=1&svyLanguage=EN&conid=&svyValueGuid=E0B7AC3F88F6CFF1A9BC00145E7A941C&svyValueVersion=0000000001&survey%2Fresult%2Fq1%2Fa1=&onInputProcessing%28SUBMIT%29=Save
Where can track the responses. Can you please help me out in this regard.
Edited by: madhuthiurnahari on Jul 27, 2011 12:49 PM

Hi please refer to this link. You will get an answer to your query.
Survey Suit in CRM
if you need more info, you can refer to these links as well
crm survey suite extractors into BW
Survey Suite - "Evaluation" button not returning any results
Hope this helps.
rgrds,
Randhir Soni

Survey Suit in CRM

Dear SAP Guru's,
Could anyone plz help me how to go about using a Survey suit.
I have created a questionnaire in CRM_SURVEY_SUIT.
Kindly plz share any info about implementing a Survey Process.
Is there any TX. Code to call the Survey Sheet in CRM system. Plz help me with ur experience.
Regards,
Amit

Hi Amit,
I am giving the example how to create questionnaire with Survey Suite for Activities, repeat the same according to your object
Defining Questionnaires
Use
The questionnaire in the activity is based on the survey. A survey is created in the Survey Suite. This is a tool for managing surveys, opinion polls and questionnaires. The surveys can be found in the left area of the Suite. The surveys for each application are found in the corresponding folders in the tree.
For an overview of the available surveys for the relevant application, open the folder for that application.
To display the content of a survey, double-click the survey you wish to see. The content is displayed on the right hand side of the screen.
If a translation has been created for a survey, and is available, the symbol next to the survey in the tree is the symbol for the "Translate" function.
It is possible to copy an existing survey. In this way, you make savings by reusing questionnaires in the same or similar survey projects.
Procedure
To carry out the activity, choose one of the following navigation options:
Transaction Code CRM_SURVEY_SUITE
IMG Menu Customer Relationship Management  Transactions  Settings for Activities  Questionnaires  Define Questionnaires
General Settings for the Questionnaire:
1. Enter the transaction code CRM_SURVEY_SUITE to start the Survey Cockpit.
The Overview of Surveys screen appears.
2. In the list of applications choose the component ACTIVITY.
a. Press button Create (F5) to create a new questionnaire.
b. If you have already assigned a survey to the component, you can choose button Change (F6) to maintain it.
c. If you are copying an existing survey from another application, select the survey, choose the button Copy (F7), assign your newly created survey to application ACTIVITY and rename the survey.
You can edit your questionnaire in the Survey Builder that is opened for case a. and b.
A template is generated for a newly created survey. It already contains a survey title and a section with a question/answer and pushbuttons to send or reset the filled out questionnaire.
3. You can maintain survey attributes (CTRL + F12) to make central settings for your questionnaire.
The system opens a dialog box in which you can decide, for example, whether the survey can still be changed after sending or for which scenarios is it valid.
Create Survey Elements:
1. In the upper left screen area, select the hierarchy node in the structure view of the questionnaire.
2. Choose Insert Section to create a group of individual questions that belong together as regards subject.
The system displays detailed information for the section in the lower left screen area.
3. In the Text field enter a name that is to appear as the title of the question group in the survey.
4. Select the new section and choose Insert Question to define your questions. The system displays entry fields in which you can enter the question text, ID (is visible in expert mode) and the rating factor.
A question consists of the attributes question text, Id, and rating factor, which you must maintain and also of as many answers as required.
A unique Id must be assigned to each question. This Id is necessary for the later evaluation of the completed survey. The system gives you a suggestion for a unique Id, but you can overwrite this.
With the rating factor, you can control the quantitative evaluation of the survey. The higher the rating factor, the greater the weighting of the question in the evaluation. In the evaluation, the calculation is made by multiplying the rating factor of each question by the rating of the selected answer.
5. Select your question and choose Insert Answer to pre-define your answers. The system displays entry fields.
An answer consists of answer attributes and answer options. According to the answer category, the answer can contain one or more answer options. For input fields and text areas, only one answer option per answer is allowed, for radio buttons, check- boxes and list boxes, as many answer options as required are possible.
A unique Id (is visible in expert mode) must be assigned to every answer. This Id is necessary for the later evaluation of the completed survey. The system will give you a suggestion for a unique Id, but you can overwrite this.
You can also determine whether the text is placed to the left or the right of the input element and whether the answer should be in display format only and therefore unchangeable.
For input fields and text areas, you must also specify the size.
If necessary, select one of the answer options as a default value that is already selected when you open the questionnaire.
6. Add other questions/answers that you want to ask in this section or create new sections with questions/answers.
The system updates the status of the questionnaire in the structure view and in the preview every time as soon as you confirm your entries.
7. To change the attributes of a survey element you created, you have to double-click on it in the structure view.
8. Choose Save.
You can run a test for the created survey (CTRL + F8).
9. Go back (F3) and activate your survey (CTRL + F1).
After creating the questionnaire you got to create an URL for this, If you wish to use it in E-Mails. Pleas refer to the following two links to Create an URL
https://www.sdn.sap.com/irj/sdn/profile?userid=3527467
Re: CRM Survey Suit
As per my Knowledge there is no Specific config guide for this
Reward points if it helps
Murali

XSLT transformation error when importing target group in CRM Survey cockpit

Hi,
I created a target group using the segment builder and exported that to a local file. Then when creating a survey using CRM survey cockpit (tcode: SURVEY) and trying to import the same target group from the local file; I get an error :
"Error when applying a XSLT transformation"
System Response
Data transformation cannot be executed. Application functions that depend on the transformation cannot be executed
I tried various file formats : RTF, TXT, XLS, HTML but still I get the same error. Export to XML option is neither available while exporting from segment builder nor while importing into Survey cockpit. The target group is not empty.
Are there any settings to be maintained to resolve the error ?????
Dhaval.

Hi Suhel,
Thanks for the response... as far as my understanding goes, the crm survey suite can be used for maintaining questoinnaires that are transaction specific. also the functionality of question tables and rows is not available in the survey suite but is available in the survey cockpit (tcode: SURVEY).
However the same does not allow me to refer to the target groups created using the segment builder.... Is there a way I can use the target group created through the segment builder in the survey cockpit ????
Dhaval.

Crm survey suite extractors into BW

Similar Messages

Maybe you are looking for