CRMD_ORDER Item Details TAB one of line item setting date as 12/31/1899

Hi Experts,
We have 3 line item for order, we call it as main line, return line and replacement line item. When we select Return line item and go to Dates Tab it shows all the dates related to that.  Here Depot send the date via XML File and it is getting set as "Depot Received Date", But when some orders get cancelled as depot dosent received that order they send blank date in XML File, but it save the date as "12/31/1899 16:00" . I am not able to get how it is getting set.
Please help me regarding this, Where should i check for this?
Regards,
Poonam

Hi,
This is unfortunately not possible with standards but you may try using Badi ME_PROCESS_PO_CUST => PROCESS_ACCOUNT.
Regards

Similar Messages

  • Overwrite Tax Code in Invoice tab of PO line item

    Hi all.
    Is there any user exit through which I can Overwrite Tax Code in Invoice tab of PO line item.
    I dont think a field exit will help since I have decide the tax code value based on the line item details like plant and a/c assignment cat. and header Purchase org.
    Any help will be very much appreciated.
    Thanks in anticipation.
    Regards,
    Aditya

    Hi Aditya,
    there are three different possibilities to influence tax codes in PO - user-exit is not one of them.
    If you can assign a company code to your purchase organization, then it's possible to determinate tax code based on purchase view.
    Some say, it's possible to maintain on company codes, too.
    It's possible to assign MM-tax class to sites and account assignments. Then via tax condition a tax code can be determined.
    And you can make a condition determination based on sales tax classes, but then in a pricing user exit corresponding tax class has to be read.
    Most times I use tax code determination via tax conditions - then users don't have to maintain anything in addition.
    Regards,
    Christian

  • How to Restrict one more line item in Purchase Requisition

    Dear SAP MM Guru's
    My business Requirement is to Restrict one more line item to create in Purchase Requisition,
    Using T code : ME51N  i have  created a PR with 10 (TEN) Line item's on 20 June '14 ,
    Using T Code : ME52N  on 23 June '14 my business demands to add one more line item 11th  with different material code in Purchase Requisition .
    Now Sourcing Team is demanding  is once Purchase Requisition is created Don't allow to create one more Extra line item in same PR .
    Through an Error : " One More Line Item is not possible to ADD "
    Can i use below BAPI :
    1) BAPI_PR_CHANGE
    2) BAPI_REQUISITION_CHANGE
    Please do the Needful
    Thanks & Best Regards
    Kumar

    Hi,
    Change Screen layout for PR.
    For ME52N make Material number and Material description/short text fields to 'Only display'. By this user cannot enter new material code or direct material description to add new item.
    In this scenario check :
    1. Create new with reference to another PR by adopting details.
    2. Check with Change push button behavior within ME52N and ME53N transactions available.
    3. Consider remove ME52N authorizations from users (& Change Push button also from ME53N).

  • Transaction ME21N Screen layout Item Details TAB settings

    Hi,
    ME21N transaction some of item details TABS are invicible. Like "Delivery address tab" is invicible. I want to make it visible/changeble to enter address for ship to.
    Right now I am looking into SPRO on screen layout settings and transaction SHD0 for screen layout variant.
    But I could not able to activate/visible of this particular tab.
    Help needed to make "Item detail delivery address tab" visible/change.
    Thanks,
    Deepak.
    Edited by: KDeepak on Apr 12, 2010 2:29 PM

    Hi Deepak,
    The path is SPRO -- Materials Management- PurchasingPurchase order- Define screen layout at Document level-field selection -ME21N-Reference item data
    In field selection screen for ME21N i.e.maintain table T162 -Field selection groups .Under this on the tab of Reference data ,item you have to mainatin as an optional entry for Delivery Address.With this delivery address tab will be visible for you under ME21N trancsction.
    Regards,
    Nitin Amritkar

  • Table - Change details to SO and Line Items

    Hi Buddies
    I have an interesting question to all of u. Please give a try. Give me a surprise..
    With a Sales Order, we do the following actions - create/change/delete. Like,
    With Header:
    1) Create a New Order
    2) Change the Header details
    3) Delete a Sales Order
    With Line Item:
    1) Add a new Line Item
    2) Change the Line Item values
    3) Delete a Line Item
    Could you plz tell me where I can have the details of these changes made?
    I would like to know the Table/Field names which stores these details!
    Regards
    Stefan Jockords

    In reply to abuse report message:
    >Moderators I am not able to reply to posts or edit my query? Plz fix it.
    This thread has been locked - you cannot reply nor edit.  And you can't edit something after it's been responded to in any case.
    matt

  • Info req -- in sales order, item detail tab

    hi all,
    In sales order (VA01), Item detail tab,
    1. what is the purpose of business transaction type field?
    2. if click on the field, it will show list. so, where to create the list?

    Hi
    The purpose of that you have to go thro F1 and understand
    The possible entries for that filed is defined in IMG activity T code OVE5
    IMG--->MATERIALS MANAGEMENT->PURCHASING>FOREIGN TRADE AND CUSTOMS>BASIC DATA FOR FOREIGN TRADE-->DEFINE BUSINESS TRANSACTION TYPES AND DEFAULT VALUES
    Regards
    Raja

  • User exit for delivery tab of PO line item?

    Hi guys,
    i want to impose checking on under delivery tolerance field present under delivery tab of PO line items.
    Is there any user exit to do this??
    Appropriate solution would be rewarded/
    Regards,
    GURU

    Check Enhancement - MM06E005 - Exit EXIT_SAPMM06E_012
    OR
    Check Business Add-In ME_PROCESS_PO_CUST has method CHECK.
    -Alpesh

  • Only able to confirm one PO line item at a time

    In SRM 7.0 (Ext Classic) it seems that you can only select one PO line item at a time to confirm.  I am doing this in the portal, highligting the lines, clicking create with reference and then confirmation.  Then I get an error that says only select one line.
    I don't understand why SAP would not let you confirm more than one PO line item at the same time, you can do it in SRM 3.0.
    Please advise.
    Thanks,
    Matt

    It will actually bring in both lines eventhough you don't select them both in the portal.  However, it does seem that you can't confirm a limit and a standard line at the same time.

  • Bapi to copy the PO line item below the existing PO line item

    Hi All,
    I am new to work on BAPI, Can any one help me out,
    Requirement is to copy the PO line item below the existing PO line item (Replicate the line item for returns purpose) . So is there any bapi to do this task.
    Thanks in Advance
    Pallavi
    Moderator Message: Please employ the SAP procedures to identify the right BADIs and Exits and help yourself.
    Edited by: kishan P on Nov 16, 2010 1:56 PM

    Hi,
    What i think is you should use two BAPI one is BAPI_PO_GET_DETAIL to fetch existing details of line items and then BAPI_PO_CHANGE to create s second one.
    Nabheet

  • Multiple line item not appearing in vendor line item in FB60

    Hi
    I am posting FB60 accounting entry. I am deducting WHT on the invoice.
    For ex: Expense amount - Rs. 100000, WHT - 10000
    Hence accounting entry is posted:
    Expenses A/c.. Dr 100000
       To TDS Payable 10000
       To Vendor A.c 90000
    Now when i see vendor line item in FBL1N there is only one credit line item for Rs.90000.
    But my requirement is that, vendor line item report should include two line item:
    One for vendor credit i.e. Rs.100000 and one debit for TDS payable for Rs. 10000 and not single line item for Rs.90000
    Please let me know how can i get this. Is there any standard report for the same?

    Hi friend,
    unfoortunately the system doesn't post debit for vendor in this case. You have no report to display line items that wasn't posted.
    would you like have it:
    31 - Vendor ... 10,000.00
    25 - Vendor............1,000.00 *
    40 - expense .......10,000.00
    50 - WHT ..........1,000.00
    The standard automatic WHT post directly the invoice amount to vendor account like this:
    31 - Vendor ... ...9,000.00
    40 - expense ........10,000.00
    50 - WHT ...........1,000.00
    Tell about your business process. What are you doing for ?
    regards

  • PO item with Multiple Goods receipt line items

    Hi Experts,
    When we create PO for specific vendor with one PO line item then at the time of Good receipt there are multiple GR line items. How to control those multiple GR line items as one GR item.
    Appreciated your help
    Regards
    Krishna

    Hi,
    If you did GR from PO with underdelivery qty in line items, SAP recognize it as partial delivery.
    Basically, in the standard system the underdelivery qty scenario is allowed, but not for overdelivery qty.
    If you intended to force the system to allow one line item in PO with only one line item in GR, therefor you could create program checking with development team.
    please check the link for your reference.
    http://help.sap.com/saphelp_47x200/helpdata/en/a5/63344643a211d189410000e829fbbd/frameset.htm
    regards,
    rob

  • Last line item gets changed to first line item for cs01

    HI experts,
               I have writen a BDC for Tcode cs01.
    I am facing a problem in that.If sucppose there are 4 line items,
    the first three line itmes are getting uploaded correctly but the kast line item gets changed to first line item.
    below is part of my code.
    DELETE ADJACENT DUPLICATES FROM T_MAT COMPARING MATNR.
    SORT T_MAT BY MATNR. "HEADER DATA
    SORT T_BOM BY MATNR1. "ITEM DATA
    *CLEAR : COUNTER, ITEM_NO.
    LOOP AT T_MAT INTO W_MAT.
      REFRESH GT_BDCDATA.
      CLEAR   GW_BDCDATA.
    perform bdc_dynpro      using 'SAPLCSDI' '0100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29N-STLAN'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RC29N-MATNR' W_MAT-MATNR.
                                 'lejn44001'.
    perform bdc_field       using 'RC29N-WERKS' W_MAT-PLANT.
                                 '4600'.
    perform bdc_field       using 'RC29N-STLAN' W_MAT-BOM_USAGE.
                                 '1'.
    *perform bdc_field       using 'RC29N-DATUV'
                                 '22.06.2010'.
    perform bdc_dynpro      using 'SAPLCSDI' '0110'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RC29K-BMENG'
                                  '1'.
    perform bdc_field       using 'RC29K-STLST'
                                  '1'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29K-EXSTL'.
    perform bdc_dynpro      using 'SAPLCSDI' '0111'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29K-LABOR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    LOOP AT T_BOM INTO W_BOM WHERE MATNR1 = W_MAT-MATNR.
      cnt = cnt + 1.
      CONCATENATE  '0' CNT INTO VAR.
       ADD 1 TO COUNTER.
       ITEM_NO = 10 * COUNTER.
       OVERLAY ITEM_NO WITH '0000'.
       W_BOM-ITM_NO = ITEM_NO.
    perform bdc_dynpro      using 'SAPLCSDI' '0140'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29P-POSTP(03)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
    PERFORM bdc_field USING new_mark W_BOM-BOM_COMP.
    clear new_mark.
    CONCATENATE 'RC29P-MENGE(' var ')' INTO new_mark.
    PERFORM bdc_field USING new_mark W_BOM-QTY.
    clear new_mark.
    CONCATENATE 'RC29P-POSTP(' VAR ')' INTO NEW_MARK.
    perform bdc_field USING new_mark W_BOM-ITM_CAT.
    clear new_mark.
    clear VAR.
      ENDLOOP.
    loop at T_BOM INTO W_BOM WHERE MATNR1 = W_MAT-MATNR.
    perform bdc_dynpro      using 'SAPLCSDI' '0130'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29P-POSNR'.
    perform bdc_field       using 'RC29P-POSNR' V_CNT.
                                 '0010'.
    perform bdc_field       using 'RC29P-IDNRK' W_BOM-BOM_COMP.
                                 'PURCHASECOST'.
    perform bdc_field       using 'RC29P-MENGE' W_BOM-QTY.
                                 '20'.
    perform bdc_field       using 'RC29P-MEINS'
                                  'M'.
    perform bdc_dynpro      using 'SAPLCSDI' '0131'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RC29P-POTX1'.
    perform bdc_field       using 'RC29P-SANKA'
                                  'X'.
    V_CNT = V_CNT + 10.
    ENDLOOP.
    CLEAR V_CNT.
      perform screen_data. " IS ALL ABOUT CALLING TRANSACTION......
      ENDLOOP.
    following is The input file format m providing.
    Material     Plant     BOM usage     Item No     Item Cat     BOM component     QUANTITY
    WRJN46106     4600     1     10     z     PURCHASECOST     10
    WRJN46106     4600     1     20     z     SOURCINGCOST     15
    WRJN46106     4600     1     30     z     INVRESERVE     12
    WRJN46106     4600     1     40     Z     INVRESERVE1     20
    in this the first 3 line items are coming correctly but the 4th one gets changed to
    first line item.
    e.g INVRESERVE1 changes to purchasecost.
    plz help.
    Thanks n regards,
    Ashmita singh.

    Hi Suneel,
    I hardly can't believe that. There must be an mistake by your own in the smartform itself. Would you please share some screens or better, the smartform-XML itself. You can pass out everything else and just share the table and a dataset to try this.
    I'm pretty sure that there is something wrong with the settings or even the loop itself. I never faced a problem like that or even heared about such things.
    I would love to have a look inside.
    Before you share it, create a new one with just the table inside and try it with the same data. Perhaps it is just of to much folders or something like that, so the generating comes in trouble.
    Regards
    Florian

  • How to add the line item text in the Ledger line item report

    Hi SAP Gurus,
    I having one requirement from the user. He wants the line item text which we will enter in FB60/FB70/FB50 has to be shown in the Ledger line item report. Right now this field is not available. Is there any possible we can make this line item text in the ledger line item report i.e. FBL1N/FBL3N/FBL5N?
    advance thanks for the help.
    Regards,
    Deva.

    Hi,
    You can do the below to get this. (You can change the names of the function modules as per your wish/ organization naming convention):-
    Step 1:-
    Create function module Z_GET_SGTXT as below:-
    Import:-
    BELNR LIKE BKPF-BELNR
    BUKRS LIKE BKPF-BUKRS
    BUZEI LIKE BSEG-BUZEI
    GJAHR LIKE BKPF-GJAHR
    Export:-
    PRCTR LIKE BSEG-SGTXT
    FUNCTION Z_GET_SGTXT.
    ""Local Interface:
    *" IMPORTING
    *" VALUE(BELNR) LIKE BKPF-BELNR
    *" VALUE(BUKRS) LIKE BKPF-BUKRS
    *" VALUE(BUZEI) LIKE BSEG-BUZEI
    *" VALUE(GJAHR) LIKE BKPF-GJAHR
    *" EXPORTING
    *" VALUE(SGTXT) LIKE BSEG-SGTXT
    SELECT SINGLE SGTXT FROM BSEG INTO SGTXT WHERE GJAHR = GJAHR
    AND BELNR = BELNR
    AND BUKRS = BUKRS
    AND BUZEI = BUZEI.
    ENDFUNCTION.
    Step 2:-
    Then create the Function Modules as below:-
    Z_LINE_ITEMS_GET_SGTXT (Copy of SAMPLE_INTERFACE_00001650)
    FUNCTION Module Z_LINE_ITEMS_GET_SGTXT.
    ""Local Interface:
    *" IMPORTING
    *" VALUE(I_POSTAB) LIKE RFPOS STRUCTURE RFPOS
    *" EXPORTING
    *" VALUE(E_POSTAB) LIKE RFPOS STRUCTURE RFPOS
    Initialize Output by using the following line
    E_POSTAB = I_POSTAB.
    E_POSTAB = I_POSTAB. "<-- important
    CALL FUNCTION 'Z_GET_SGTXT'
    EXPORTING
    BELNR = I_POSTAB-BELNR
    BUKRS = I_POSTAB-BUKRS
    BUZEI = I_POSTAB-BUZEI
    GJAHR = I_POSTAB-GJAHR
    IMPORTING
    SGTXT = E_POSTAB-SGTXT
    EXCEPTIONS
    OTHERS = 1.
    ENDFUNCTION.
    Step3:-
    Transaction FIBF:-
    Settings -> Products -> of a Customer
    SGTXT Text in Line Item Display Active
    Settings -> P/S Module -> of a Customer
    00001650 SGTXT Z_LINE_ITEMS_GET_SGTXT
    Step 4:-
    Create the layout for FBL*N with display of the TEXT.
    Regards,
    Gaurav

  • WH  tax line items cleared along with Other line items Message no:8I701

    hI guru,
    When i run J1INCHLN  System givem the error is : Withholding tax line items cleared along with other line items, message no:8I701
    Pleas any one give solution ..
    I also cheked as respective g/l for tds IN FBL3N . All line items are opend.
    Also cheked all selection parameter in J1INCHLN  and FBL3N .is same .
    Why the sys behaviour like this .
    Thanks is andvance
    Milind

    HI,
    he error is occuring in this part of the
    unction Module J_1IEWT_CHALLAN_UPDATE
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    LOOP AT p_t_ausz1.
    Select the cleared line item from bseg table.
       SELECT SINGLE * FROM bseg INTO  p_bseg_tab
                WHERE bukrs = p_t_ausz1-bukrs
                AND   belnr = p_t_ausz1-belnr
                AND   gjahr = p_t_ausz1-gjahr
                AND   buzei = p_t_ausz1-buzei
                AND   ktosl = 'WIT'
                AND   qsskz NE space .
       IF sy-subrc <> 0.
    This is not an ewt clearing transaction relevant for challan update.
         p_no_with_clear = 'X'.
         EXIT.
       ELSE.
         APPEND p_bseg_tab.
       ENDIF.
    ENDLOOP.
    Even if one line item chosen is not of withholding tax entry, system
    should exit by error message.
    DESCRIBE TABLE p_bseg_tab LINES  p_bseg_lines.
    DESCRIBE TABLE p_t_ausz1  LINES  p_with_lines.
       IF p_bseg_lines > 0.
    At least one entry is found in bseg table for challan update.    IF p_with_lines NE p_bseg_lines.
    At least one line chosen by the user is not for challan updation.
          MESSAGE e701(8i).
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>.
    This is a clear case,that you are trying to post some documents
    which does not match with the selection parameters.
    I feel the above problem could be due to some document/s (open items of
    the earlier years)are incorrect which is causing the reported problem.
    Kindly run the challan update program for smaller date range so that you
    can find the faulty document.
    Hope this solves your query.
    Reg
    Madhu M

  • Disable e-mail  field  when line item created by copying another line item

    Hi All,
    I need your help. Actually our user wants to create a line item by copying existing line item in shopping cart. While doing so the requirement is the e-mail address field remains disable after the line item is copied. Please guide me how to do it. Please feel free to ask me any further questions.
    Regards
    Praveen Ghosh

    Hi Zaid,
    Thank you for your response.  Assets are not my area so I’m not sure if I missed a transaction or step in the process.   I tested this out by doing the following steps:
    Created AUC Asset class with line item checked
    Assigned PM Order type as non-investment with no investment profile and created order number
    Created a main asset number 
    Created an AUC sub asset number to step 3
    Created settlement rule to sub asset number on order
    Posted costs to order
    Settled from order to AUC with transaction KO88
    Created distribution rules for asset with transaction AIAB
    Settled from sub asset to main asset number with transaction AIBU
    When I settled from the sub to the main asset number in step 9, I found I lost the line item detail.  Is there another configuration setting I need to make to allow me to see the line item detail when I use AIBU?
    Thank you,

Maybe you are looking for