CROPPING VIDEO OR PICTURES IN ADOBE PREM. ELE. 4.0

Is there a way to crop pictures or video in Adobe Premiere Elements 4.0? I need to take out some of the side of the video I shot and I'm not sure if that is possible or not. Please help!

"I see that there is a Crop Effect, but it seems like you can only use the
effect one way. I need to crop out a little bit of the sides and I'm not
sure how to do that."
Can you describe what you want to do a little better? Are you cropping all
4 sides or just the left and right? I'm assuming you don't want the black
area where you cropped off the image -- correct?
The crop effect will let you trim each edge independently, but that leaves
transparency where the edge was trimmed. If you check the zoom box in the
crop effect properties, the image will be scaled so that the image will be
the same as the original frame size. Horizontial and vertical are scaled
independently and that can distort the image if you didn't crop
proportionaly. That may be ok depending on your purpose. If you only crop
the left and right edges, zoom will be similar to what happens with your
wide screen tv when you have it set up to stretch a standard definition show
to fill the screen.
If you don't want the disproportional stretching, don't use zoom. Use
"scale" in the motion properties. That scales both directions equally. You
can either scale the original image or the image with the crop effect
applied.
Rather than scale up the image, some people simply place a background image
underneath so they don't have black space.

Similar Messages

Montage video est-ce accessible adobe première

Ou est le montage de video et est-ce accessible

http://forums.adobe.com/community/premiere?view=discussions for Premiere Pro discussions
When you go there, you need to provide a LOT more information
-PPro Information FAQ http://forums.adobe.com/message/4200840
CS5-thru-CC PPro/Encore tutorials http://forums.adobe.com/thread/1448923 may also help
Do not reply here, this Cloud forum is not about video editing
If you actually have Premiere Elements, not Premiere Pro, the forum link is...
http://forums.adobe.com/community/premiere_elements?view=discussions

Putting a border on a cropped video FCP X

hello
im using fcp x
Can anyone tell me how I can put a border on a cropped video clip?
When i do a picture in picture i would like to put a border on the cropped clip but when i use the "simple border" effect the border only shows when it is uncropped.
help?

You could give this a try. It's free. Scroll down to bottom of page for the link. (I have not tested it.)
Russ

Load .MOV into adobe première éléments

Please someone help me to Load .MOV into adobe première éléments 10?
Everything should work , new windows computer , new caméra
Olympus tg1, i Hans QuickTime Pro 7 open on the side !!!

Patrick Bourret
I found a sample video from your brand model camera and have tested it in my Premiere Elements 10 on Windows 7 64 bit.
The sample that I test
AVCHD video compression
.swot audio compression
.mov file extension wrapper format
1920 x 1080 @ 29.97 progressive frames per second
I set the Premiere Elements 10 project preset =
NTSC
DSLR
1080p
DSLR 1080p30 @ 29.97
I imported the video (saved to my computer desktop) into the project via the program's Get Media/Files and folders. What I imported had the gspot readout out as show in the following screenshot
This video on the Timeline displayed with perfect video and audio at play back in the Edit Mode monitor. No green video.
Since you are using Premiere Elements 10, I believe that we need to focus on the video card, especially if your video card is from NVIDIA. If so, the answer may be to roll back the video card driver version rather than to assure that you have the latest video card version. Please check out the following
http://forums.adobe.com/thread/1317675
We will discuss this further in the morning.
Thank you for all the helpful information supplied.
ATR
Add On...I am not sure if there is any merit in replacing QuickTime Pro with the "regular" QuickTime latest version.
http://www.apple.com/quicktime/download/

Adobe Première et Mac

Bonjour,
Je travaille avec Adobe Première sur un PC. J'aimerais acheter un Mac Book Pro pour faire des montages vidéos en déplacements. Quel modèle me conseillez-vous ?
D'avance merci

realisateur2ouf wrote in French asking me why I thought Windows was better.
My reply in French...
Bonne journée.
Je n'ai jamais utilisé un ordinateur Mac, seul Windows (94, 98, XP, puis 7 et 8 64 bits). Donc, je suppose que ce n'est pas juste pour moi de faire une comparaison entre les deux si un seul des deux est représenté. D'après ce que Steve Grisetti a écrit, il a à la fois. Alors, il vient avec les mains sur l'expérience dans la comparaison.
J'ai beaucoup de versions de Photoshop Elements et Premiere Elements sur mes ordinateurs. Tous sont en marche extrêmement bien d'un point de vue des ressources (dual core, 8 Go de RAM installée, 3.And autres dans leur maison Windows. J'obtiens mon montage vidéo / exportation fait de haute qualité à un bon rythme. Donc, je suis dans un flux de travail confortable et familier.
Mais, je suis curieux de connaître l'expérience de l'ordinateur Mac, mais je n'ai pas le temps ni les fonds pour l'explorer. Quand j'entends parler Premiere Elements Mac pas compris certaines fonctionnalités de la version Windows et quand j'entends parler de toutes sortes d'événements étranges avec le système d'exploitation Mac, par exemple, zoome Timeline et d'autre part, j'hésite à y aller pour autre chose que des considérations de dépannage . Quelques fois des principes généralisées peuvent aider soit dans des environnements informatiques pour Premiere Elements montage vidéo / exportation.
Je vous souhaite un bon montage vidéo avec ce choix que vous faites. Je ne suis pas un fan de Windows 8 64 bits encore. Donc, si je devais juste de commencer, je me demande si j'irais Windows 8 64 bits ou une version de l'ordinateur Mac?
ATR..
My reply in English
Good day.
I have never used a Mac computer, only Windows (94, 98, XP, and then 7 and 8 64 bit). So, I guess it is not fair for me to make a comparison between the two when only one of the two is represented. From what Steve Grisetti has written, he has both. So he comes with hands on experience in the comparison.
I have many versions of Photoshop Elements and Premiere Elements on my computers. All are running extremely well from a resource point of view (dual core, 8 GB RAM installed, 3.2 GHz, 2 TB free hard drive space, and others) in their Windows home. I am getting my video editing/exporting done in high quality at a good pace. So, I am in a comfortable and familiar workflow.
Nonetheless, I am curious about the Mac computer experience, but I do not have the time nor funds to explore it. When I hear about Premiere Elements Mac not including certain features of the Windows version and when I hear of all sorts of strange happenings with the Mac operating system, Premiere Elements Mac zooms in Timeline and other, I am reluctant to go there for other than troubleshooting considerations. Sometimes generalized principles can help in either computer environments for Premiere Elements video editing/exporting.
I wish you good video editing with whatever choice you make. I am not a fan of Windows 8 64 bit yet. So, if I were just starting out, I wonder if I would go Windows 8 64 bit or some version of the Mac computer??
ATR

Bonjour. Quand j'ouvre Adobe première elements 12 et que je clique sur "Editeur vidéo" puis sur "Projet existant", mes projets ne s'ouvrent pas et le programme finit par se fermer.

Bonjour. Je travaille sur ma version d'essai d'Adobe première elements 12 depuis une semaine. Tout a bien fonctionner jusqu'à maintenant. J'ai mis Adobe première elements 12 sur mon bureau et ma fenêtre s'ouvre normalement. Mais maintenant, quand je clique sur "Editeur Vidéo" puis sur "Projet existant", ça bloque et mon projet ne s'ouvre pas. Adobe première elements 12 finit même par se fermer. Quelqu'un peut-il m'aider? Merci d'avance.

licancabur123
Thank you for the replies.
Right now we will not worry about the 12 to 12.1 Update. We will focus on just opening a tryout Premiere Elements 12 project.
Let us go through the list
1. At this time, can you open any new projects? Are you at the stage where you cannot open an existing project or a new one?
2. Did you look at the problem with and without the antivirus and firewall(s) disabled?
3. Did you delete the Adobe Premiere Elements Prefs file and, if that did not work, the whole 12.0 Folder in which it exists.
(See post numbered 1 in this thread for details.)
If you cannot open a new project, then we will consider
1. What video card/graphics card does your computer use? Is the card driver version up to date?
2. Are you running the program from a User Account with Administrative Privileges? Have you right clicked the desktop icon and selected
Run As Administrator to apply it?
Please let us gather the above information together. Depending on the answers we may be heading for:
uninstall, ccleaner run through, reinstall
or
3. If nothing is working, then we might consider creating a new User Account with Administrative Privileges and installing and running
Premiere Elements from there.
We will be watching for news of your progress.
Thank you.
ATR

PE8 in Windows7: cropping a still picture does not encode to dvd properly

Within PE8, the cropping top, bottom, left and right appear to be correct but when encoded to dvd, the image is either hashed on one side or not cropped at all. I have other pictures within the same project that are cropped and encode correctly. It appears that there are limits of cropping, i.e., if you crop more than 14% on a side ... the only way I could get around this is to crop the picture externally in photoshop and use this copy in the project without using the cropping feature in PE8. Any thoughts on what the problem could be??
I have a Intel i7-860 cpu with 8g ram; evga gt200 graphics card and lots of internal drive space.

Thank you to Bill Hunt and Steve Grisetti for your replies.
I am using the Project Setting of HDV-720p (1280x720).
My default on the "Scale to Frame Size" is un-checked.
The two pictures in question that are 3700x2800 pixels & 4890x3400 pixels respectfully.
So both pictures used Property>Motion>Scale of 24% & 18%. They also use the Video>Effect>Crop with the Top of 22% or Bottom of 24%.
As a test, I created two separate projects:
     . project setting of HDV-720p (1280x720)
     . project setting of STD (720x480)
Each project used the same two pictures in the following scenarios:
     . picture #1 & #2 with the "scale to frame size = unchecked as well the pictures with the "scale to frame size" = checked
     . for the clips with scale to frame size = unchecked, the Property>Motion>Scale were reduced to 24% & 18%
     . for the clips with scale to frame size = checked, the Property>Motion> Scale were increased to 110%
Prior to creation of DVD output to folder all pictures in PE8 look properly scaled and cropped.
The results of the tests:
     . project setting of HDV-720p generated picture #1 with "scale to frame size" = unchecked as if no cropping was applied; picture #1 with the "scale to frame size" = checked was correctly cropped. Picture #2 with both unchecked & checked options generated okay.
     . project setting of STD (720x480) generated all pictures cropped correctly.
So, looks like the cropping effect works okay for STD but may have problems with the HDV setting when using "scale to frame size" = unchecked.
Most of my pictures are in the 3500x2600 pixel range so I will take your advice and use the "scale to frame size" = checked for the bulk of my project and use the "unchecked" option for only those that I want to pan or zoom. Also I will consider doing more intensive cropping externally (like in Photoshop) before importing into PE8.

Is there ANY way to "drop" several videos or pictures at once (like an entire folder) instead of pai

Is there ANY way to "drop" several videos or pictures at once (like an entire folder) instead of painstakingly dropping/dragging one image at a time? I just opened my Adope Premiere Elements 9 and after "working with" for 9 hours, I can't figure it out! Is there a singular CLEAR guide or video out there that teaches newbies like me how to do BASICS like this? Extremely exasperated. On verge of returning to my Windows Live Movie Maker but you all likely know how frustrating THAT is.... Please help me.

lifelearner
How long have you been working with Premiere Elements 9.0/9.0.1 and on what computer operating system?
Take a look at the Premiere Elements 9 Help PDF for starter before you invest in books and such.
http://help.adobe.com/archive/en_US/premiereelements/9/premiereelements_9_help.pdf
On to the immediate issue....
When you "Get Media" Files and Folders, be aware that you can import folders with the format supported photos/videos inside.
Then go immediately to Organize header/ and Project in row below and click on Project.
You should see your folder there.
a. You can drag it to the Timeline and have your photos/videos open on the Timeline
b. You can manage folder opening and closing with the icons at the bottom left of the Project area where you see
your imported files.
If you are at the point where you already have your Project area loaded with lots of individual imports, you can create folders
there and drag your photos/videos into different folders. But, we aware that you can drag folder or individual files
from Project onto the Timeline.
Does any of the above help? If so, I will know I am going in the right direction for what you want to know.
What is with the painstakingly dropping/dragging one image at a time? Just how many images are in this project?
We are glad for the opportunity to help.
Looking forward to your follow up.
Thanks.
ATR

When I watch a streaming HD video the picture is jittery. Could adding RAM solve the problem?

When I watch a streaming HD video the picture is jittery. Could adding RAM solve the problem?

hello ozltem, i think this is related to this bug in adobe's flash plugin: https://bugbase.adobe.com/index.cfm?event=bug&id=3223393 (apparently they are aware of the issue & can replicate it, but they are not fixing it because it doesn't have a high priority).
as a workarounf you could try if [https://support.mozilla.org/en-US/kb/flash-113-crashes#w_solution-2-downgrade-to-flash-10-3 downgrading to flash 10.3] (which is still supported) or [http://forums.adobe.com/thread/1018071#TemporaryWorkaround disabling protected mode].

Impossible de continuer un montage MAC sur PC avec adobe première pro cs6.

Bonjour,
Alors voilà, j'ai un problème vraiment embêtant.
J'ai commencé, et même bien avancé, un montage vidéo sur un iMac avec adobe première pro cs6. J'ai transféré la TOTALITE des fichiers de mon projet sur mon PC. Lorsque j'ouvre mon dossier projet en .prproj, le logiciel démarre, mais un message d'érreur s'affiche: "ce projet contenait une séquence impossible à ouvrir. Aucun fichier de préconfiguration de prévisualisation de séquence ou codec n'est associé à ce type de séquence."
Je pense que cela vient des codecs, car TOUT les fichiers sont présents dans mon PC, mais je ne sais pas comment télécharger les éventuels codecs manquant. Si vous avez des idées pour résoudre mon problème, elles seront les bienvenues :-)
Merci à tous de votre future aide
crazy_J

Bonjour,
Alors, oui le Mac et le PC ont la même version d'adobe.
Ensuite, les fichiers vidéos sont en .MTS tournée avec une "SONY NXCAM NEX-EA50E" ( http://images.slashcam.de/news/NEX-AG50-seite_gross-10066_PIC1.jpg ).
Enfin, je suis un débutant sur ce logiciel, je ne sais absolument pas ce que sont les fichiers de prévisualisations.
Ce que j'ai fais exactement:
J'ai créé un dossier sur le mac dans lequel j'ai TOUT enregistré (Projet, Rushes, etc...) et je l'ai entièrement copié sur un disque dur externe avant de le mettre dans mon PC.
Je viens de me rendre compte qu'il y a un fichier " Adobe Premiere Pro Preview Files " et dedans il y a plein de clip video chacun suivit d'un fichier XMP et tous s'appellent "Rendered - ********************* "
Voila j'ai essayé de répondre à tes questions avec précisions,
Merci beaucoup de ton aide !

I'm trying to download netflix aand it keeps telling me not emough space to delete videos or pictures but i have no videos and have only 60 pictures. any help?

I'm trying to download netflixs to my ipad but it keeps telling me to delete videos or pictures. I have no videos and have 60 pictures. I need some help.

What may be taking up your iPad's memory may be not photos or videos, but rather music and apps. Music itself should not be that much of a problem but if you have a very large library it will obviously take lots of space. Your iPad tells you to delete photos or videos because you can delete them from the iPad directly, but you cannot delete music until you sync to iTunes. You may also want to try deleting some apps such as games; these usually take lots of space (up to 1GB each). These apps will sync back to your iPad when you have access to a computer once you have freed up enough memory on your iPad.
Hope this helps.

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document "Tina-19.jpg" could not be opened. Photoshop cannot open files in the "Adobe Photoshop JPEG file" format. What does this mean? I have opened my phot

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the “Adobe Photoshop JPEG file” format.
What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my pictures

JoeLib wrote:
You type way faster than me Gene.
Well, not necessarily in this case.
According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
Gene's post: Dec 29, 2014 5:54 PM
Joe's post: Dec 29, 2014 8:57 PM

How can I burn dvds of videos and pictures on my iphone?

I have a PC and would like to find out how I can burn a cd with video and pictures taken with my iPhone. Also, will the video be in HD on the disc that I create? Thanks!

You will need to have those files available for the process on your computer because this is a task which cannot be accomplished from the iPhone. You will need a disk burning utility on your computer (Roxio's software comes to mind as a possibility). The quality of the output is entirely dependent upon the nature of the original files and the capabilities of the software application. They can be written as a data disk or, in the case of the video, written as a movie so long as it is an unprotected file (from your own capture, for example). This entire operation has to be worked through on your computer. There is a minimal degree to which you can edit your captured video in the iPhone (3GS or 4) but it does not compare to the scope that would be available to you in a proper editing application on the computer.

Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the online.

Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the only one.

Use the search feature and type in Flash and there are like thousands of posts on this.
You seem to think you are addressing Apple with your post. This is a user forum and we are all users just like you.

How d you convert video to flv in adobe media encoder cc 2014

Hello,
I am trying to convert a video flv format using adobe media encoder cc 2014. i can convert itto almost anything but that and I need it so that I can import to a scene in between animated scenes... Any suggestions?
Thanks for our time,
Gary

removal of FLV and F4V export features from Adobe Media Encoder

CROPPING VIDEO OR PICTURES IN ADOBE PREM. ELE. 4.0

Similar Messages

Maybe you are looking for