Cross client connection
hi guruji
i have prd 400,qty 300 and dev 200 client, all are on sepret server,now i want to access a 400 client from the 200 client in sort that i use 200 application server for the 400 database server it can possible and how i do this,
thanks
Nainesh Suthar
It is possible to have an ABAP program that connects to a database other than the default SAP system database - with the mechanism called Multiconnect.
See note 323151 (or also: 178949, 738371 or search for "Multiconnect.", "DBCON", "DBCO").
regards
Similar Messages
-
Error Changes to Repository or cross-client Customizing are not permitted
Hi
While creating infoset in SQ02 it is giving an error as "Changes to Repository or cross-client Customizing are not permitted"
I did change the SE06 system change options , software components modifiable.
And I also changed the objects changebility in transport connections in RSA1. But still it is giving the same error.....
Can you please let me know the solution?
ThanksI'm assuming that you're creating a custom InfoCube query, so does it give you the option of creating as a Local Object (package $TMP) or one of your custom, transportable packages? Basically it's determining whether you want this InfoSet Query to be a Local Object or if you plan on transporting it throughout the landscape.
One other thing that I wanted to point out about security. SAP_ALL doesn't necessarily mean access to anything and everything. There are cases where the Authorizations assigned to an SAP_ALL Authorization Object don't necessarily have all of the correct assigned Activity for every transaction. Security, in your case, doesn't seem to be the problem because you're getting this request to assign a package.
Edited by: Dennis Scoville on Nov 4, 2009 2:39 PM -
Hi SDN Guru,
Actualy my Customer using 3 Landscape in ECC Systems Dev,Qty, Prd. But in SAP BI using only two Landscape
Dev & Prod.
Actualy Mapping with ECC Dev to BI Dev Sys , But, Unfortunately my management asking please collect the data from ECC QTY to BI Dev.
We have only data's avilable ECC Qty, there is no data in ECC Dev.
My Question is how to collect the data in different Client (or) Cross Client.
*how to connect cross client then how to extract the data from ECC Qty to BI Dev System.
Can you please provide me solution ASAP...
Thanks in Adance Guru's.
Regards,
KumarHi,
You have to map your ECC QUA to BI Dev system.
Communication Setting between BW and R/3
Step 1: Define Logical System in R/3
Step 2: Assigning Logical System to Client
Step 3: Setting Up an RFC Destination
Step 4: Distributing Data Model
Message Types Involved in Process of Data Loading
Step 5: Generating Partner Profile
Step 6: Maintaining Message types in T-Code WE20
Cross check the system mappings in RSLOGSYSMAP table in both systems.
You can search some step by step docs in SDN.......
Regards,
Suman -
Hello,
just a question, for the first time we use the same source system (with different client) as a sandbox and development box.
When activating a datasource in RSA6 in client 120 and then go to RSA6 client 190, it is written that
Only editing of DataSources (hierarchy locked by user).
I understand that RSA6 is cross client and so, modifications to datasources also, so it makes no sens to have a sandbox and development on the same instance, because all tests from sandbox (client 190) will affect extract structure in the development client.
Can you confirm, or do you think this is a strange behavior or some customizing is missing?
ECC 6.0 Ehp4 connected to BI 7.0 Ehp1
Thanks a lot
Thibaud.You are correct that DataSources are cross-client and therefore when you activate a DataSource in your Client 120, the DataSource is immediately available in Client 190 and every other client on that same instance. Therefore, any changes made to the DataSource, including enhancement of the extraction structure and CMOD code, will affect all clients in that instance.
I can see your point that it does not make much sense that a sandbox client and development client exist on the same instance. In fact, I could say that it does not make sense for many more reasons than just BW-related areas. For example, if a user exit for a transaction process is developed in the sandbox client, it would be in the development client as well. Then, if true development is being done and unit testing is performed with the user exit developed in the sandbox, the results of that testing would be flawed because that user exit would not be transported to the next target instance (e.g. QA) along with the actual development objects, causing potential issues whilst testing in QA.
In the many years that I've been working on SAP (R3/ECC, BW/BI, GTS, etc), the organizations that I have worked for have always had the sandbox as a separate, significantly smaller, instance from the development instance. Sanbox environments are supposed to be just that, a playground where there are no rules. Once you introduce that type of open availability to the development environment of a productive system, you are introducing a boat load of potential issues. -
ConfigMgr Clients connection over direct access.
My test client machine is running Windows 8.1 and connecting to network through Direct Access. I am running SCCM 2012 R2 on Windows Server 2012.
Test Machine: NYWIN8
SCCM Server: SCCM01
Domain: demo.local
I would like to understand how configmgr handles clients connecting through direct access. What all functionality is available for such clients?
On my client machine is see following errors:
FSPSTATEMESSAGE.LOG
Failed in WinHttpSendRequest API, ErrorCode = 0x2ee7
[CCMHTTP] ERROR: URL=HTTP://SCCM01.demo.local/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=12007, Text=ERROR_WINHTTP_NAME_NOT_RESOLVED
POLICYAGENT.LOG
Policy
http://SCCM01.demo.local/SMS_MP/.sms_pol?WRC10000.SHA256:BE60C5A54E508758261E6EDAE80AB21576A214309B9E1E19EE1D5A96C4508EC4 is not available.
DATATRANSFERSERVICE.LOG
DTS job {E6FAADEE-F22E-4E89-92EE-C2D9C10C3056} BITS job {9C444FAB-FD3C-4A6B-B8A4-81DA159E4E45} failed to download source file
http://SCCM01.demo.local:80/SMS_MP/.sms_pol?WRC10000.SHA256:BE60C5A54E508758261E6EDAE80AB21576A214309B9E1E19EE1D5A96C4508EC4 to destination C:\Windows\CCM\Temp\{C9AA0DDC-BD37-442D-A00E-EE7404D47C12}.tmp with error 0x80190194
DTS job {E6FAADEE-F22E-4E89-92EE-C2D9C10C3056} BITS job {9C444FAB-FD3C-4A6B-B8A4-81DA159E4E45} partially completed 0/1 with error 0x80190194 context 5
Software Catalog Update Endpoint
Failed to open portal registry key 'Software\Policies\Microsoft\CCM'. maybe haven't been created yet. Error 0x80070002
WEDMTRACE.LOG
No CCM Identification blob
CAS.LOG
The number of discovered DPs(including Branch DP and Multicast) is 0
SMSCLIUI.LOG
Failed to set DNSSuffix value to the registry.
Are there any issues due to connecting using direct access?When I try to deploy any software (7-ZIP or Notepad++) to this client I get following error:
The software change returned error code 0x87D00607(-2016410105).
I can deploy same software fine to other machines connecting on LAN.
Server Logs:
Portlctl
PORTALWEB's previous status was 0 (0 = Online, 1 = Failed, 4 = Undefined)
PORTALWEBs http check returned hr=0, bFailed=0
awbsctl
AWEBSVCs http check returned hr=0, bFailed=0
AWEBSVC's previous status was 0 (0 = Online, 1 = Failed, 4 = Undefined)
Client Logs:
CAS
The number of discovered DPs(including Branch DP and Multicast) is 0
CCMEVAL
Client's current MP is http://SCCM01.DEMO.local and is accessible
ClientLocation
Current AD forest name is Demo.local, domain name is Demo.local
Domain joined client is in Intranet
Rotating assigned management point, new management point [1] is: SCCM01.demo.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>
Assigned MP changed from <SCCM01.demo.local> to <SCCM01.demo.local>.
ContentTransferManager
No data since 11/13/2013
CTM job {F6085C09-4C39-489E-A6F6-2C268398B7F2} successfully processed download completion.
DataTransfer
DTS job {B227AB6E-6D0F-4709-B8C6-AA8B66CBBE2D} BITS job {AE61D01C-E251-45FA-8B2C-2E22DDD91016} failed to download source file
http://SCCM01.demo.local:80/SMS_MP/.sms_pol?WRC10000.SHA256:BE60C5A54E508758261E6EDAE80AB21576A214309B9E1E19EE1D5A96C4508EC4 to destination C:\Windows\CCM\Temp\{22619283-47B1-445A-9262-C1FA54AD0F64}.tmp with error 0x80190194
DTS job {B227AB6E-6D0F-4709-B8C6-AA8B66CBBE2D} BITS job {AE61D01C-E251-45FA-8B2C-2E22DDD91016} partially completed 0/1 with error 0x80190194 context 5
Filebits
BranchCache Is Not Enabled
Failed to check PeerDistribution status. NOT able to do branch cache.
FSPSTATEMESSAGE
Failed in WinHttpSendRequest API, ErrorCode = 0x2ee7
[CCMHTTP] ERROR: URL=HTTP://SCCM01.demo.local/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=12007, Text=ERROR_WINHTTP_NAME_NOT_RESOLVED
Successfully sent location services HTTP failure message.
InternetProxy
Failed to get proxy for url 'HTTP://SCCM01.demo.local/SMS_FSP/.sms_fsp'. Error 0x87d00215
InventoryAgent
Inventory: 9 Collection Task(s) failed.
SCCLIENT
Event maps to notification type = Application Enforcement Failed (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at EventWatcher_EventArrived)
SMSCLIUI
Failed to set DNSSuffix value to the registry.
IPCONFIG /ALL from CLIENT:
Windows IP Configuration
Host Name . . . . . . . . . . . . : NYWIN8
Primary Dns Suffix . . . . . . . : demo.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : demo.local
System Quarantine State . . . . . : Not Restricted
Ethernet adapter vEthernet (Internal):
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #3
Physical Address. . . . . . . . . : 00-15-5D-01-0B-07
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d3f:4e51:c648:7b26%26(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.123.38(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 872420701
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-EA-A9-CE-E0-DB-55-D2-5E-59
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter vEthernet (External):
Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
Physical Address. . . . . . . . . : 84-A6-C8-AF-03-DE
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::9cb5:5132:1f47:e7c6%24(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.5(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Thursday, January 2, 2014 1:27:53 PM
Lease Expires . . . . . . . . . . : Saturday, January 4, 2014 12:27:55 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 730113736
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-EA-A9-CE-E0-DB-55-D2-5E-59
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Local Area Connection* 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 84-A6-C8-AF-03-DF
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Bluetooth Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 84-A6-C8-AF-03-E2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Ethernet:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : E0-DB-55-D2-5E-59
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.home:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter iphttpsinterface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : iphttpsinterface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819(Preferred)
Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:c598:7f17:e286:369d(Preferred)
Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10(Preferred)
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 369098752
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-EA-A9-CE-E0-DB-55-D2-5E-59
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.{DC7D2C63-1506-49EC-A40F-AA4E56DE4001}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes -
Remote access VPN clients connected to Internet from VPN
Greetings,
I need to let remote VPN clients to connect to Internet from the same ASA VPN server
" client connects to ASA through VPN tunnel from outside interface then access Internet from the same ASA from outside interface again
thanksyou'll need to configure 'same-security-traffic permit intra-interface' on the ASA .
Also, need to setup the corresponding nat statements for your clients pool range.
i.e.
global (outside) 1 interface
nat (outside) 1 access-list anyconnectacl
where anyconnectacl is the pool for your clients:
access-list anyconnectacl permit ip 172.16.1.0 255.255.255.0 any -
regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you
Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen -
How to make the client connect to the server at the command prompt?
I found this code on IBM's website, it was a training session on servers and clients using java.
The code compiles fine and the server seems to start up properly when I use java Server 5000. I think whats happening is the server is running and listening for a connection on port 5000.
When I try to run the client I get the following error.
Exception in thread "main" java.lang.NoSuchMethodError: main
I see a start() method but no main. As far as I know, applications should all have main, it seems as if the person who wrote this kinda confused applets with application. Not that I would really know what happened.
If you have time, could you tell me if there's an easy fix for this? I would love to have this client/server working if it isn't too much trouble. As I have looked all over the net for a free client/server applet that will actually let me see the java code and none of the free ones do allow getting to their source.
Most of them allow you to customize them somewhat but also have built in advertising that can't be removed.
This is the closest I have come to finding one that lets me look under the hood. But alas it doesn't work out of the box and I don't know what to do to fix it.
Heres the code: Server:
import java.io.*;
import java.net.*;
import java.util.*;
public class Server
// The ServerSocket we'll use for accepting new connections
private ServerSocket ss;
// A mapping from sockets to DataOutputStreams. This will
// help us avoid having to create a DataOutputStream each time
// we want to write to a stream.
private Hashtable outputStreams = new Hashtable();
// Constructor and while-accept loop all in one.
public Server( int port ) throws IOException {
// All we have to do is listen
listen( port );
private void listen( int port ) throws IOException {
// Create the ServerSocket
ss = new ServerSocket( port );
// Tell the world we're ready to go
System.out.println( "Listening on "+ss );
// Keep accepting connections forever
while (true) {
// Grab the next incoming connection
Socket s = ss.accept();
// Tell the world we've got it
System.out.println( "Connection from "+s );
// Create a DataOutputStream for writing data to the
// other side
DataOutputStream dout = new DataOutputStream( s.getOutputStream() );
// Save this stream so we don't need to make it again
outputStreams.put( s, dout );
// Create a new thread for this connection, and then forget
// about it
new ServerThread( this, s );
// Get an enumeration of all the OutputStreams, one for each client
// connected to us
Enumeration getOutputStreams() {
return outputStreams.elements();
// Send a message to all clients (utility routine)
void sendToAll( String message ) {
// We synchronize on this because another thread might be
// calling removeConnection() and this would screw us up
// as we tried to walk through the list
synchronized( outputStreams ) {
// For each client ...
for (Enumeration e = getOutputStreams(); e.hasMoreElements(); ) {
// ... get the output stream ...
DataOutputStream dout = (DataOutputStream)e.nextElement();
// ... and send the message
try {
dout.writeUTF( message );
} catch( IOException ie ) { System.out.println( ie ); }
// Remove a socket, and it's corresponding output stream, from our
// list. This is usually called by a connection thread that has
// discovered that the connectin to the client is dead.
void removeConnection( Socket s ) {
// Synchronize so we don't mess up sendToAll() while it walks
// down the list of all output streamsa
synchronized( outputStreams ) {
// Tell the world
System.out.println( "Removing connection to "+s );
// Remove it from our hashtable/list
outputStreams.remove( s );
// Make sure it's closed
try {
s.close();
} catch( IOException ie ) {
System.out.println( "Error closing "+s );
ie.printStackTrace();
// Main routine
// Usage: java Server <port>
static public void main( String args[] ) throws Exception {
// Get the port # from the command line
int port = Integer.parseInt( args[0] );
// Create a Server object, which will automatically begin
// accepting connections.
new Server( port );
}CLIENT:
import java.io.*;
import java.net.*;
public class ServerThread extends Thread
// The Server that spawned us
private Server server;
// The Socket connected to our client
private Socket socket;
// Constructor.
public ServerThread( Server server, Socket socket ) {
// Save the parameters
this.server = server;
this.socket = socket;
// Start up the thread
start();
// This runs in a separate thread when start() is called in the
// constructor.
public void run() {
try {
// Create a DataInputStream for communication; the client
// is using a DataOutputStream to write to us
DataInputStream din = new DataInputStream( socket.getInputStream() );
// Over and over, forever ...
while (true) {
// ... read the next message ...
String message = din.readUTF();
// ... tell the world ...
System.out.println( "Sending "+message );
// ... and have the server send it to all clients
server.sendToAll( message );
} catch( EOFException ie ) {
// This doesn't need an error message
} catch( IOException ie ) {
// This does; tell the world!
ie.printStackTrace();
} finally {
// The connection is closed for one reason or another,
// so have the server dealing with it
server.removeConnection( socket );
}Thanks for your time.CLIENT:
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.net.*;
public class Client extends Panel implements Runnable
// Components for the visual display of the chat windows
private TextField tf = new TextField();
private TextArea ta = new TextArea();
// The socket connecting us to the server
private Socket socket;
// The streams we communicate to the server; these come
// from the socket
private DataOutputStream dout;
private DataInputStream din;
// Constructor
public Client( String host, int port ) {
// Set up the screen
setLayout( new BorderLayout() );
add( "North", tf );
add( "Center", ta );
// We want to receive messages when someone types a line
// and hits return, using an anonymous class as
// a callback
tf.addActionListener( new ActionListener() {
public void actionPerformed( ActionEvent e ) {
processMessage( e.getActionCommand() );
// Connect to the server
try {
// Initiate the connection
socket = new Socket( host, port );
// We got a connection! Tell the world
System.out.println( "connected to "+socket );
// Let's grab the streams and create DataInput/Output streams
// from them
din = new DataInputStream( socket.getInputStream() );
dout = new DataOutputStream( socket.getOutputStream() );
// Start a background thread for receiving messages
new Thread( this ).start();
} catch( IOException ie ) { System.out.println( ie ); }
// Gets called when the user types something
private void processMessage( String message ) {
try {
// Send it to the server
dout.writeUTF( message );
// Clear out text input field
tf.setText( "" );
} catch( IOException ie ) { System.out.println( ie ); }
// Background thread runs this: show messages from other window
public void run() {
try {
// Receive messages one-by-one, forever
while (true) {
// Get the next message
String message = din.readUTF();
// Print it to our text window
ta.append( message+"\n" );
} catch( IOException ie ) { System.out.println( ie ); }
import java.applet.*;
import java.awt.*;
import java.io.*;
import java.net.*;
public class ClientApplet extends Applet
public void init() {
String host = getParameter( "192.168.1.47" );
int port = Integer.parseInt( getParameter( "5000" ) );
setLayout( new BorderLayout() );
add( "Center", new Client( host, port ) );
}Sorry about that. Now when I run an html file with this applet I just get the x in the corner.
Thanks for looking. -
How to disable Cross client Table Access
Hi All,
i have created a Sand box client and i have set its cross client object value to
"No Changes to repository and cross client customizing objs"
but still users are able to run transactions like SR13 which are cross client tables
please helpHI Zeeshan,
Once u run the Tcode like SR13, the users would be able to enter the Tcode and have a new entry varinat created..but during SAVE the system would sure prompt the message... " Changes to Repository or cross-client Customizing are not allowed. Please press DISPLAY or CANCEL" ..
so the changes would not be saved hence forth and have to be cancelled out..
hope this is what u have been looking for..
Br,
Sri
Award points for helpful answers -
How to create cross-client variant?
Hi Experters:
Can someone tell me how create cross-client variant in ECC6.0?
in 4.6, we can define the client or define cross-client transaction variant,
how to create cross-client variant in ECC6.0?
Regareds,Hi,
In se93 there is a check box cross-client .
The Cross-client switch identifies which transaction variants are cross-client and which are client-specific. If the switch is set, the transaction variant is cross-client. If the switch is not set, the transaction variant is client-specific.
A client-specific transaction variant can only exist in the client where it was created. The field contents of the transaction variant only have to be available in the particular client. A cross-client transaction variant is available in the system regardless of which client is currently active. The field contents of the transaction variant have to be available in all clients.
http://****************/Tutorials/ABAP/TransactionVariant/Create.htm -
Is there a way to force which wifi network and proxy clients connect to from WGM?
is there a way to force which wifi network and proxy clients connect to from WGM?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
How to create a cross-client table maintenance dialog?
Hello everybody,
I have a client specific table (mandt is the first key field) that should be maintained cross-client: In the table maintenance dialog, I want to change/create/insert values belonging to clients other than the current logon client. Can I do this with a generated maintenace dialog? If yes, how?
Thank you for your help, regards, Kathrin!Hi Kathrin,
I think you can't, you must create your own dialog maintenance program.
They are some program to copy data from client to others .. but never seen any dialog cross client. (or remove the mandt in your key).
Regards
Frédéric -
OATS: Error Creating datasource client connection
Hi All
When i try to add montiors in the OATS controller machine i am getting the following error .
Error while creating datasource client connection.
i am trying to monitor a linux machine. I am able to ping that machine from controller.
when i tried to do
plink.exe username@hostname i am getting the following error ...
FATAL error : Network error : Connection timed out..
Can anyone please help me on this??
ThanksI'm not sure if this is the same problem but the following thread may help (mentioning the ports that may need opening on your firewalls)...
Re: What are the various ports used by OLT?
oracle.port.rmi=4444
oracle.port.http=8088
oracle.port.empstart=9001
oracle.port.uil2=7071
oracle.port.dataCollector=7073
oracle.port.webservice=8083
oracle.port.jndi.rmi=1098
oracle.port.jndi=1099
oracle.port.https=8433
* 9001 (Agent Comunication Port)
* 1099 (Datacollector Comunication Port)
* 8088 (for running OpenScript scripts) -
Internal outlook client connectivity in exchange 2010 when coexist with exchange 2013
Hi all ,
on my side i would like to clarify few queries.
Say for instance i am coexisting exchange 2010 with exchange 2013 .Unfortunately if all of my exchange 2013 servers goes down .
Q1 .On that time will the internal outlook users having their mailboxes on exchange 2010 can be able to connect mailboxes without any issues ? In case if they face any issues what kind of issues will they be? Because why i am asking is we should have pointed
the autodiscover service to exchange 2013 during coexistence.
When an user closes and reopens the outlook after whole exchange 2013 environment failure ,outlook will first query the autodiscover service for the profile changes to get it updated on users outlook profile.In such case autodiscover service will not be
reachable and i wanted to know will that affects the internal client connectivity for outlook users having their mailboxes on exchange 2010.
Q2. Apart from outlook internal users connectivity ,what kind of exchange services(i.e owa,active sync,pop,external OA and imap) will get affected when whole exchange 2013 environment goes down during coexistence ?
I have read the below mentioned statement on this awesome blog but still i wanted to clarify with you all on my scenario.
http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx<o:p></o:p>
Internal Outlook Connectivity
For internal Outlook clients using RPC/TCP connectivity whose mailboxes exist on Exchange 2010, they will still connect to the Exchange 2010 RPC Client Access array endpoint.
For internal Outlook clients using RPC/TCP connectivity whose mailboxes exist on Exchange 2007, they will still connect directly to the Exchange 2007 Mailbox server instance hosting the mailbox.
Please share me your suggestions and that would help me a lot .
Regards
S.NithyanandhamHi Winnie Liang ,
Thanks a lot for your reply.
Scenario 1 : for internal outlook connectivity
We have below settings for exchange 2010 autodiscover.
mail.domain.com - will be the namespace for internal autodiscover URI for all the exchange 2010 cas serves
We are going to have below settings for exchange 2013 autodiscover.
mail.domain.com - will be the namespace for internal autodiscover URI for all the exchange 2013 cas serves
During coexistence mail.domain.com will be pointed to exchange 2013 cas servers . I mean to say if we try to resolve the mail.domain.com it will get resolved in to the exchange 2013 cas servers.
So on such case if anything happened wrong to the new environment or else if entire environment goes down .Do we face any issues while outlook users connect to existing mailboxes in exchange 2010 ?
Because why i am asking is ,on the below mentioned article i have read all the autodiscover request will go via exchange 2013 cas servers during coexistence.That means all the existing mailboxes in exchange 2010 will also have to query exchange 2013 cas
servers for autodiscover request.During the whole exchange 2013 environemnt failure whenever the user tries to close and open outlook .Outlook will first queries the autodiscover service for any changes happened on that particular mailbox and it will try to
get it updated on user profile.
http://blogs.technet.com/b/exchange/archive/2014/03/12/client-connectivity-in-an-exchange-2013-coexistence-environment.aspx
Would it be possible to make the exchange 2010 mailbox users to query only the scp points which belongs to the exchange 2010 cas servers for autodiscover request ?
Scenario 2: For exchange services
mail.domain.com - will be the namespace for all the exchange 2010 services (i.e owa,activesync,external outlook anywhere,pop,imap)
mail.domain.com - will be the namespace for all the exchange 2013 services (i.e owa,activesync,external outlook anywhere,pop,imap)
What about the above services will it get affected during whole exchange 2013 environment failure ?
Note : We are not facing this issue , i hope everything goes well in my environment while doing coexistence i am just asking this question on my own interest?
Regards
S.Nithyanandham
Thanks S.Nithyanandham -
How to get clients connected in WMS on windows server 2008 with c# coding
Sorry to bother anyone about this question.
Can anyone knows how to retrieve amount of client connection to Windows Media Server in real time same as WMS does on server console by c# programming ?
I got logfiles of WMS in system32 directory for details but it must be off-line of all connections which will able to get those informations for doing anything,but in this case I want real time client connection
at online when a client connects to WMS that I will get amout of that client also.
I have tried to search Windows Media Service SDK to develop this on my Windows 7 OS,but I did not find that really.
Can anyone knows this,please ?
Regards,
BigBermHi SYaGCi,
Denis is right this is actually documented in the Supported Platforms Documentation:
"Windows 7 and Windows Server 2008 R2 are new platform support additions in Service Pack 3 which are only available for support on the SP3 full release install of SAP BusinessObjects Enterprise. The SP3 patch only release of SAP BusinessObjects Enterprise does not provide support for these two new platforms."
Kind regards,
John
Maybe you are looking for
-
F110 not usting XBLNR??
Hi all, I have a problem. When I execute automatic payment (F110) then the XBLENR field or the 'Reference' is not copyed to the reconciliation bank account. This results with inability to close the items automatically when the bank account statement
-
Problem with BW query/Structure in Xcelsius
I Build a universe based on a BW Query with structure. I created an excel/live office file of this universe and data are correctly returned. But when using the live office imported in Xcelsius and click on preview with the option of refresh on load
-
No sound out of left on speakers
There is no sound out of the left on speakers on my iPhone 4s. I didn't upgrade to IOs 6. It's still IOs 5.1.1 When using earbud it works L & R. I made sure Mono Audio is Off and the slider is centered betweel L & R. Maybe a problem on left speaker?
-
Does SDDM have Journaling/History/Logging functionality?
Does Data Modeler have some kind of Journaling/History/Logging functionality that will generate DDL for journaling/history/logging tables and triggers? Regards, Marc de Oliveira
-
Issues Solves - Firmware Downgrade, iMac & AppleTV Losing Airport
Thanks to this forum. Just wanted to re-iterate these issues that were solved. Sometimes things are just so simple you overlook them. To downgrade your AEBS firmware, just go to manual setup, and when you hold your mouse over VERSION, you can select