Cross linking javadoc references {@link}, etc. using netbeans

I've read the javadoc manuals and FAQ, but can't figure out how to properly speficy the directories for the -link command to javadoc
I want to use relative addresses, so other developers don't have to change their nbproject setups. When I use a hardcoded, complete file path, it works great. But the relative links fail with
javadoc: warning - Error reading file: ../fnflib/dist/javadoc/package-list
I've setup
file.reference.fnflib.javadoc=../fnflib/dist/javadoc
javadoc.additionalparam= -link ${file.reference.fnflib.javadoc}
which seems to be passing nearly what I want. The error message doesn't clearly show what the current working directory is, so its not clear how the relative naming should go.
Thanks

I believe the current working directory is the directory you're at when you run javadoc.

Similar Messages

Cross linking PDs

Hi, Is it possible to cross link Authorization Rules, Actions, Expressions, etc, across various Policy Domains statically created through the OAM console?
Say I have 2 policy domains created through OAM console (PD1 and PD2), and an Authorization Action (Action1) for my first domain PD1, is there a way of invoking that Action ("PD1.Action1") from my policy definitions of PD2, without having to create Action1 again in PD2..?

To edit a member document inside a Portfolio you have to open it (using the Open File link on the toolbar) - when it's previewing on a card you are just looking at a JPEG image.
It's all rather messy but Adobe don't allow access to the regular tools if the Portfolio mode is active, so..
Open your Portfolio
Open the file in which the link is to be created (right-click the card or use the toolbar button)
Use the Link tool to draw the active area
Select "go to a Page View" and click OK.
While the mini-dialog is active, switch back to the window with the Portfolio in it.
Open the destination file (again with the right-click or toolbar button).
Choose the page and click to fire the Link tool's mini-dialog.
Close the target file.
Save and close the source file.
Save the Portfolio.
If you're doing hundreds of links, set aside a week.

Cross linked files

What is the solution(s) to preventing files from getting cross linked for projects that use same files?

If they use the same files don't you want them to be cross-linked in the first place? Or, (more likely) do you have copies of the files for each project, and you want to make sure each project only uses the file that are within the project's folders?
You should use projects and project libraries. From the LabVIEW Help:
Use project libraries to qualify the names of VIs and other
LabVIEW files. LabVIEW identifies VIs by filename, so LabVIEW unintentionally
might load and reference a VI because the VI has the same filename as another
VI, a problem known as cross-linking. When a VI is part of a project library,
LabVIEW qualifies the VI name with the project library name to avoid
cross-linking. A qualified filename includes the filename and the owning project
library filename.
Message Edited by smercurio_fc on 09-01-2008 02:39 PM

Error with Links if using x3 primary keys

Hi Folks:
Here is the error code I'm receiving:
ORA-01422: exact fetch returns more than requested number of rows
Unable to fetch row.
Background: I am using Application Express 3.2
All of the pages I have created that rely on x2 primary keys (first_name, last_name) work fine.
I have a table that has x3 primary keys: Table is called "time_off_awards". The x3 primary keys are: last_name, first_name, approval_date.
I created a report that works properly and lists the awards for each person (each person can receive more than one award-on different dates).
I also created an edit link that works properly IF *(only if)* each individual has only one award. If the individual has more than one award then I get the error above. When I set up the link I used all three keys. The x3 PK's should uniquely identify each row, but if the same last name/first name appear more than once (that is if the person has more than one award) I get the error. I thought at first maybe it was just not reading the 3rd key/part of the link (approval_date), but it shows properly if you move your cursor over the edit link.
Here is a link to a screen pic of how I have my link set in Apex:
[http://www.wczone.com/link_settings.gif]
Here is a link to a pic of the report with some info:
[http://www.wczone.com/report_link.gif]
If needed, here is my table info:
CREATE TABLE PERSONNEL.TIME_OFF_AWARDS (
LAST_NAME VARCHAR2(40) NOT NULL,
FIRST_NAME VARCHAR2(25) NOT NULL,
APPROVAL_DATE DATE NOT NULL,
HOURS_OFF NUMBER(3),
CITATION VARCHAR2(1500),
/* Keys */
PRIMARY KEY (LAST_NAME, FIRST_NAME, APPROVAL_DATE),
/* Foreign keys */
CONSTRAINT TOA_PERSONNEL
FOREIGN KEY (LAST_NAME, FIRST_NAME)
REFERENCES PERSONNEL.MARC_PERSONNEL(LAST_NAME, FIRST_NAME)
TABLESPACE PERSONNEL;
Thanks for any help, I've tried looking at a couple of Apex books, but they didn't help much.
Matt
Edited by: user10495310 on Mar 4, 2009 8:21 AM

Thank you everyone for the help and information you gave to me.
Your ideas and advice helped me to think through the issues involved.
The way i actually found to work around this issue was a little different.
What I did was the following (which may only be usable with empty tables. If its possible to create a new column with a sequence and trigger on a table that already contains data it should work also):
1. I removed the current PK's that were currently set.
2. I added a single, unique PK (that used a sequence and trigger to automatically increment) to the table as was suggested in this thread and other APEX forum threads.
3. I changed the link on the report so that it used the new PK, and also changed the PK used on the forms (under Processes - both the page rendering and page processing processes).
The Difference:
4. Next I changed the table (not by using APEX, but directly) from using the automatically generated ID as the PK, back to using the compound PK (x3 keys). I then added an constraint to make sure that the automatically generated column was unique. So now I have the compound PK that my supervisor wants us to use, and I'm able to use a unique, automatically generated key for APEX to use.
I found also that if you already have a column that uses a unique/auto-generated key you can still use it with APEX without switching keys around.
1. I added the new column to the sql in the reports source section so that the new column was searched (and then used 'hidden' so it wouldn't be displayed on the report users would see).
2. You can still add the unique key under the processes on the form that is being linked too under the Primary key tabs. If its not a PK it won't show up in the pop up which is to the right of "Item Containing Primary Key Column Value" but it can be entered manually (i.e. p23_AUTO_ID) and it will work fine. You would also need to edit your form so that the auto ID that is being passed from the report is part of the form - but hidden if desired).

When I'm on a page with many links it used to highlight or underline the link I was looking at ... so when it opened the link in a new window, I could look back and not lose my place

when I'm on a page with many links it used to highlight or underline the link I was looking at ... so when it opened the link in a new window, I could look back and not lose my place

It sounds like you have chosen a publishing template rather than a word processing template. There are two basic modes in MS Word: word processing and publishing layout. Word processing mode (and all word processing templates) have a continuous text box in the page for writing text. The publishing layout mode (and publishing templates) are documents that have text boxes placed for articles, titles, pictures, etc. Be sure to choose the word document template and you’ll get what you expect. Do not choose the word publishing document.

Set annotation flags for link annotations using JavaScript

The JavaScript for Acrobat API Reference doesn't list Link as an annotation type[1]even if it's a subtype in the PDF specification (8.4.5 Annotation Types).
I know how to get the link objects using JavaScript, but they don't have a print property, because it belongs to its mother annotation object.
Example:
I have a scanned PDF, OCRed, with two links. Acrobat's content panels shows an annotation object with two links.
>this.syncAnnotScan();
>var annots = this.getAnnots();
returns
>null
Any idea how to set the annotation flag to Print for a link annotation using JavaScript? (flag 3 aka Print is required for PDF/A)
[1] http://livedocs.adobe.com/acrobat_sdk/9/Acrobat9_HTMLHelp/JS_API_AcroJS.88.20.html

Hi,
Thanks for replying. But this example sets falshvars through the UI, and as I have mentioned I want this done from javascript in the document - I dont have the value for some of the flashvars during embedding.
(Using a EI call is my last resort, as I am not expected to make any modification to the SWF file - the SWF file, hitherto, was being hosted in a HTML where it was being passed flashvar params)

Multiple Languages for Area pages, subarea pages, links, etc

Is there a language setting that can be used to display the configured text on the area pages, subarea pages, links, etc in different languages or do I have to configure multiple language versions of my areas pages, subarea pages, links, etc?

Hi DM
As per my knowledge.
Area pages texts, Service Texts don't have Multiple Languages configurations option.
Based user logon language text will chnage dynamically.
BR
SS

How do prevent firefox from loading(going to) a website(following a link, etc...) that i never want to see again(example: choose now & click on some link in the future)?

I go to a website(link, etc...) & I never want to go there again, but sometime(anytime) later I come across some page that seems to be useful. I click on a link, and the other required links until I find that it is a waste of time & I then kind of remember having been there in the past & have wasted all this time again. This happening for many different sites over time.
How do I prevent firefox from loading(going to) all websites that I choose to go to when I have in the(distant) past decided that I never wish to return to: block websites with message saying that I blocked it?

Hello Cen.
You need to find an extension that blocks certain sites. I am certain there are many. Search over at [http://addons.mozilla.org addons.mozilla.org].
I hope you find it.
If you need help, just ask.

Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc

Worst update ever! On my Vista everything is wrong! Back button never active; If I want open pages as new tab it opens new window; FF starts with blank page instead of Google; No url address shown on status bar when I move mouse arrow on the link etc.. Please Help!

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Does Firefox has this option (which I may not know) to click on my bookmark, link, etc. where to open a new tab without doing this right-click, it is aggravating?

Hello, I would like to use Firefox as my default browser, but the reason I still use the old Netscape Navigator is that that clicking on my bookmarks Firefox is not opening new tab. Does Firefox has this option (which I may not know) to click on my bookmark, link, etc. where to open a new tab without doing this right-click, it is aggravating?

Install the addon
Open Bookmarks in New Tab 0.1.2010043001.
https://addons.mozilla.org/en-US/firefox/addon/open-bookmarks-in-new-tab/
Restart on installation.

Invalid Cross Link when trying to copy files e17

Hello I got a new hard drive and I was trying to copy all my files to it here is the dircetories
/media/multimedia/Pictures
to
/media/Pictures
Those are two different USB hard drives.
Any thoughts?
"Edit"
1. Open first hard drive /dev/sdc2 mounted on /media/multimedia/Pictures directory with enlightenment filemanager
2. select all files, right click, copy
3. Open /dev/sdd1 mounted on /media/Pictures Directory with enlightenment filemanager
4. no option in right click menu for paste, so I use ctl + v
5. "An error occurred while performing an operation"
Cannot move '/media/multimedia/Pictures/IMG_9539.JPG' to '/media/Pictures/IMG_9539.JPG'. Invailid cross link device.
Last edited by mich04 (2012-11-20 12:54:27)

This is not at all helpful. Please read http://www.catb.org/esr/faqs/smart-questions.html
and then edit your post to include the exact command(s) you used, paste the full error messages and any other details that might help people assist you.

Linker problem using version 12.4 on Linux

I am trying to use Solaris Studio 12.4 on Linux ( OpenSuse 13.2 ). I have installed the compiler and set up the PATH to its bin directory. When I compile/link a program I am receiving:
"sun.link ../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem
"/opt/oracle/solarisstudio12.4/bin/CC" -g -m64 -KPIC -o "../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem" "../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o" -Bdynamic -lrt -Bstatic -Bdynamic
CC: Warning: failed to detect system linker version, falling back to custom linker usage"
and this is followed by:a series of errors involving standard streams, standard output, and the like:
"../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `__SLIP.INIT_A()':
/opt/oracle/solarisstudio12.4/lib/compilers/CC-gcc/include/c++/4.8.2/iostream:74: undefined reference to `std::ios_base::Init::Init()'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `__SLIP.FINAL__A':
test_after_array_elem.cpp:(.text+0x28f): undefined reference to `std::ios_base::Init::~Init()'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `boost::report_errors()':
/home/suseldiener/vcs/modular-boost/libs/vmd/test//../../../boost/core/lightweight_test.hpp:133: undefined reference to `std::cerr'
/home/suseldiener/vcs/modular-boost/libs/vmd/test//../../../boost/core/lightweight_test.hpp:139: undefined reference to `std::cerr'
/home/suseldiener/vcs/modular-boost/libs/vmd/test//../../../boost/core/lightweight_test.hpp:139: undefined reference to `std::ostream::operator<<(int)'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `boost::detail::error_impl(char const*, char const*, int, char const*)':
/home/suseldiener/vcs/modular-boost/libs/vmd/test//../../../boost/core/lightweight_test.hpp:75: undefined reference to `std::cerr'
/home/suseldiener/vcs/modular-boost/libs/vmd/test//../../../boost/core/lightweight_test.hpp:75: undefined reference to `std::ostream::operator<<(int)'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `std::ostream & std::endl<char, std::char_traits<char> >(std::ostream &)':
test_after_array_elem.cpp:(.text.std::ostream & std::endl<char, std::char_traits<char> >(std::ostream &)[std::ostream & std::endl<char, std::char_traits<char> >(std::ostream &)]+0x75): undefined reference to `std::ostream::put(char)'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `std::ostream & std::operator<<<std::char_traits<char> >(std::ostream &, char const*)':
/opt/oracle/solarisstudio12.4/lib/compilers/CC-gcc/include/c++/4.8.2/ostream:536: undefined reference to `std::ostream & std::__ostream_insert<char, std::char_traits<char> >(std::ostream &, char const*, long)'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `std::ios::setstate(std::_Ios_Iostate)':
test_after_array_elem.cpp:(.text.std::ios::setstate(std::_Ios_Iostate)[std::ios::setstate(std::_Ios_Iostate)]+0x7d): undefined reference to `std::ios::clear(std::_Ios_Iostate)'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `std::ostream & std::flush<char, std::char_traits<char> >(std::ostream &)':
test_after_array_elem.cpp:(.text.std::ostream & std::flush<char, std::char_traits<char> >(std::ostream &)[std::ostream & std::flush<char, std::char_traits<char> >(std::ostream &)]+0x37): undefined reference to `std::ostream::flush()'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `std::ctype<char> const& std::__check_facet<std::ctype<char> >(std::ctype<char> const*)':
/opt/oracle/solarisstudio12.4/lib/compilers/CC-gcc/include/c++/4.8.2/bits/basic_ios.h:49: undefined reference to `std::__throw_bad_cast()'
../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem.o: In function `std::ctype<char>::widen(char) const':
/opt/oracle/solarisstudio12.4/lib/compilers/CC-gcc/include/c++/4.8.2/bits/locale_facets.h:869: undefined reference to `std::ctype<char>::_M_widen_init() const'
...failed sun.link ../../../bin.v2/libs/vmd/test/test_after_array_elem.test/sun-cxx11-12.4/debug/address-model-64/test_after_array_elem..."
This is all being done from Boost and Boost Build and the linker errors are occurring because of the run-time use of the lightweight_test component of Boost.
There is no problem using gcc directly compiling in 64-bit mode but Solaris Studio C++ 12.4 is failing.
Any ideas why it cannot find the system linker and use it, or why it is failing with the "custom linker", whatever that is, would be appreciated. If Boost Build needs some other compiler/linker option to work I can adjust that. Maybe I need to install some library for -std=c++11 mode or maybe -std=c++11 mode dopes has some sort of bug.

> undefined reference to `std::ios_base::Init::~Init()'
It looks like you link with different -library/-std set of options compared to those that you compiled with.
> CC -g -m64 -o test *.o -Bdynamic -lrt -Bstatic -Bdynamic
This link line uses default settings, which is -library=Cstd for Studio 12.4.
And since you use Boost most likely you compile with -library=stlport4 or with -std=c++03, which implies -library=stdcpp (gcc STL).
Otherwise you would most likely get compilation failures (since -library=Cstd is a rather outdated STL).
You should use pretty much the same set of options when you compile and when you link.
Verify your build configuration (CXXFLAGS/LDFLAGS whatever).
regards,
Fedor.

Problem with defaultCommand - buttons, links, etc not working

Hi,
I've used the defaultCommand attribute on a number of pages in an application, and have noticed a serious problem :
After hitting enter, if no navigation occurs (i.e. only PPR), nothing on the page works anymore - no buttons, links, etc.
Is this a known issue? If so, is there a way to fix this?
Also, if an inputTextField has a f:validateLongRange tag, and the user enters an invalid value (i.e. text, or something out of range), when enter is pressed the entire page disappears, and I'm left with only the validator's error message. I know I could work around this by performing my own validation, but that is less than ideal.
Any help would be greatly appreciated. Thanks
Message was edited by:
lturner

Hi,
it does reproduce and I filed a bug. The work around is not to use the "defaultCommand" property as it works when e.g clicking onto the button
Frank

How to cross link/sync cells, where you can change either

Simple setup: I have a table with 2 columns:
Column A shows prices in EUR, column B shows prices in USD. How can I cross link/sync both cells, where you can change either?
So if I would change the EUR price (cell A1), it would update the USD price (cell B1). But it should also be possible to change the USD price (cell B1), and then the EUR price (cell A1) would update.

Here is a simple set of formulas
Column B = where you enter the cost in Euros or dollars. Cells formatted as automatic. When entering dollars, precede it with a dollar sign. When entering Euros, leave off the dollar sign or use the Euro symbol.
Column C = the conversion rate EUR/USD. I used the entire column for this but you could refer to a single cell that has the conversion rate.
Column D = formatted as US Dollars =IF(LEFT(B,1)="$",B,B/C)
Column E = formatted as Euros =IF(LEFT(B,1)="$",B*C,B)

Hiding closable cross link in UI Tab Shell?

Hi,
I am currently using Build JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660. I have created tabs in my application using tabs(page fragments .jsff). I want to programatically control the visibility of my closable cross link of tab(right top corner one) from inside the backing bean of tab(page fragment). How to do that? Please provide me some sample code for the same.
Thanks,
Vik

Hi Vik,
could you get this answer for Fusion UI shell Tab closeable event?
Regards
Jam

Cross linking javadoc references {@link}, etc. using netbeans

Similar Messages

Maybe you are looking for