Cross Post:  Printers NOT Working After BootCamp - EXCEPT in XP!!!

I have sucessfully "done" the Boot Camp and all works well - on the Windows side. Everthing also works on the Mac side, except the printer! I have a HP2600N and XP "just found" it, but my MBP can't.
Any thoughts on this?
FYI: During my "Boot Camp" experience, I had to re-format and partition etc. When I re-installed OS X, I decided not to install any Printer Drivers. I only use one printer, and I knew that it had to be setup using the HP disk (I had done this prior to Boot Camp and it worked fine). I wonder if there was "something" in the Printers directory on the Install disk that was "needed".....
Thanks!
Bob

Just that Peter, I did not have any ports open for other network connections on my network. Just the Internet. I simply forgot to do this when I re-installed the OS and configured my network again.
BTW, I'm very picky and nervous, and I go all the way using mac addresses for my network. NO ONE is getting in to my LAN!!! (i hope...)
Bob
PS: I forgot how to make the little apple....

Similar Messages

  • Printers not working after upgrading from windows 8 to windows 8.1 pro 64 bit

    did the upgrade from win 8 to win 8.1 pro 64bit.
    Printers were working fine but now are not recongnised and the spooler is not starting.
    I reset the spooler on numerous occasions to no avail and ive downloade the latest drivers for the printer but no luck.
    Please assist asap.
    I have a canon lbp 2900  and a hp officejet 6500

    I cant access any printers, not even the virtual printers.
    What I would do is use ProcMon to find out why that Event entry was written.  Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable.  Since IE9 there have been new .dll  involving printing
    which have not been reflected in any of our repair tools.  However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
    unreliable techniques.   E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
    and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.)   For example.
    Robert Aldwinckle

  • Brightness Does not work after bootcamp

    Hello, I recently installed Windows 7 Ultimate x64 on my Macbook using bootcamp, I also installed the drivers for everything.When I press brightness down, the brightness doesnt go down, I see the brightness picture, but it stays on a full bar and doesn't go down. Does anyone know how to fix this? I also tried re-installing both windows and drivers and the same problem appeared.

    Try resetting your PRAM.
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound (bong) for four times.
    6. Release the keys.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

    My printers are not working after mavericks install.
    The printer just PAUSE and can't be resumed.
    What can I do to fix - PLEASE HELP!
    It is my lifeline - we are a print shop!

    Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
    Then open System Preferences > Printers & Scanners > Print
    Select your printer on the left then click -  (minus)
    Then click + (plus) to add the printer.

  • My Keyboard and touch-pad will work during post, but will not work after the os loads?

    I have a G60 and My Keyboard and touch-pad will work during post, but will not work after the os loads? Im running Windows 7, Anyone have any Ideas? I have already tried a hard reset, and safe mode???

    Try pressing the fn key and f2 to reach bios
    or
    try a usb mouse from your desktop
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • Cross Dissolve transition does not work after cutting the tails of both ends.

    I used to apply the Cross Dissolve video transition a while ago and never had any problems. My Cross Dissolve is not working for whatever reason. I usually split parts of the movie using the razor tool and cut the tail of both parts I just split, than apply the Cross Dissolve, but it does not work at all. I dont know if I am doing something wrong here, I need your help if you can help me with that. I have also tried to apply Film Dissolve but I have the same problem.
    Thank you very much!!
    Renata

    I am trying to put together a recruiting video. I was out recording a bunch of people talking about the organization, when I am working with something like this I usually try to shorten the 3 or 5 minute clip I have from one person and just connect the parts of the clip that need to be on the screen, that requires several cuts during the clip and merge the good parts together using the cross dissolve. It is very simple and I have done several times, but for whatever reason during certain parts of the clip when applied will not work. The clips are usually 1 to 3 minutes long and I need to extract the good parts making no more than 1 minute for each peson talking.
    Thanks!
    Renata

  • ExpressCard/34 not working in BootCamp Windows 7 64-bit. Apple's BIOS emulation does not give enough resources.

    MacBook Pro unibody, 15" 2009
    ExpressCard/34 (Card is by Transcend TS-RDF1, JMicron chip for SD card) is not working in BootCamp Windows 7 64-bit. Windows reports:
    "This device cannot find enough free resources that it can use. (Code 12)
    If you want to use this device, you will need to disable one of the other devices on this system."
    Other data points: Card works fine in Mac OSX, worked under Windows XP 32-bit (initially reported same problem, but works after reboot).
    Checking the forums there seems to be no actual device suggested to actually remove that would help the problem. And even if it was, the concept is ridiculous. What other device would you like to remove? Display adapter? Network adapter? No way. I use all available devices and don't want to compromise.
    It seems like BIOS emulation does not allocate enough resources to ExpressCard.
    Are others having the same problem?
    Does anyone have a fix for this?
    Is there anyone at Apple who cares to provide a solution?

    It is not a driver problem, but a problem in the BIOS emulated by bootcamp on some (not all) MBP models. So unless Apple fixes it in bootcamp, there is no real solution. And obviously, Apple doesn't care. They are dropping the Expresscard slot anyway.
    Unfortunately, this poster seems right: http://forums.macrumors.com/showthread.php?t=912259 :
    The 2008/2009 Macbook Pros don't allow to use the ExpressCard slot because of EFI/Bootcamp errors (Windows Vista/7 cannot allocate an IRQ to the slot). You don't need any drivers for using an ExpressCard slot on Windows, you only need the drivers for the corresponding card you are using.
    Bootcamped XP allowed to use the slot, but you could not use hot-plugging.
    And from the Sonnet site ( http://www.sonnettech.com/product/tempo_sata_express34.html ) :
    Tempo SATA ExpressCard/34 not supported under Windows 7 or Windows Vista when running on unibody MacBook Pro computers. The problem is caused by the MacBook Pro's BIOS emulation, which doesn't allocate enough resources to support certain kinds of Expresscard/34 devices, such as a SATA controller, in these operating systems.
    (added link to Sonnet's explanation)

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • Card slot does not work after update (14/10/2011)

    Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
    MacBook Pro 13 OS ver. 10.6.8

    Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

  • Flash player does not work after I installed it

    Flash player does not work after I installed it

    I'm using Mac Osx and my browser is Safari
    Date: Wed, 5 Feb 2014 00:41:29 -0800
    From: [email protected]
    To: [email protected]
    Subject: Flash player does not work after I installed
        Re: Flash player does not work after I installed it
        created by Mike M in Installing Flash Player - View the full discussion
    This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
    What OS are you using?
    http://mmonlinedesigns.com/images/os.png
    What browser?
    http://mmonlinedesigns.com/images/browsers.png
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Installing Flash Player at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • HP SimplePass Reader Does not Work after Sleep

    I have only had my laptop for a week - the fingerprint reader stopped working 2 days after I bought it. I have tried everything: removing and re-installing various drivers and software, stopping and starting Credentials Manager, unchecking the box that allows the computer to turn the reader off to save power, etc.
    I have gotten it to the point where it functions when the computer is logged in, but not after sleep. It works once if you restart the computer, but after waking it from sleep it does not initialize. (no light or anything) However, if you "lock" the desktop from the start menu, the reader will log it in again. (without closing the lid or putting it to sleep)
    Simple Pass version 6.0 (latest downloaded from HP.com)
    Envy Dv6 7229wm
    Windows 8 64-bit
    Thanks

    Hello hawvi,
    I see that you are having problems with the fingerprint reader not working after returning from sleep mode. I would like to help with this issue but I need some information.
    Can you provide the full model and product number of the computer? Here is a link that shows how to find that information.
    What operating system are you using?
    How long have you had the problem?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7

    Hello need help on weird happenings to my keyboard..
    Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
    All keys on keyboard is working and touchpad is also working.
    But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
    what do you think is the problem??
    Hardware Issue? or Driver Issue?
    please help thank you..

    Hello @MysticDragon ,
    Welcome to the HP Forums!
    I understand some of the keys on your keyboard are not working after installing Windows 7.
    I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
    Try this:
    1. Click Start.
    2. Click Control Panel.
    3. Click Clock, Language, and Region.
    4. Click Region and Language.
    5. Click the Keyboards and Languages tab.
    6. Click Change keyboards...
    7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
    8. Click on any other keyboards in the Installed services list.
    9. Click Remove.
    10. Repeat for all other non-English (United States) keyboards.
    You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
    Let me know if this works!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Web Service is not working after Upgrade SAP EHP6

    Hi ,
    Recently we upgraded SAP ECC 6.0 to EHP 6.
    We have a custom web service which is consumed in  .NET Application to get the Sold To from Sales Order.
    the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
    When I tested the Service in WS Navigator in SAP, it is working fine.
    We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
    But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
    Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
    we did the below steps.
    Regenerated the configuration
    Re imported the Certificates
    Activated the service in SICF.
    Please let me know if anybody have same problem or if any steps we are  missing.
    thanks.
    Uma

    after changing the .NET Application , Service is working fine.

  • Microsoft Excel 2013 add-in not working after update

    I have originally posted this question at answers.microsoft.com and have been re-directed to post here. (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/microsoft-excel-2013-add-in-not-working-after/298aff03-c90a-4a2a-b67b-07b6f3c7648c)
    We are an organization with over 200 users and are currently using Microsoft Office 2013 (Click-to-run install via Office 365 portal), we have noticed that in Excel when we apply the monthly Office update, the add-in (e.g. Analysis Toolpak) would stop working
    with the following error message displayed.
    I tried updating from 15.0.4631.1004 to 15.0.4641.1003,
    15.0.4641.1003 to 15.0.4649.1004, they all gave the same results.
    I have checked the captioned file path and it is indeed missing, I think the update mechanism messed up the add-in somehow, a full re-install would fix it as quick or online repair is not doing the trick.  This is not the only add-in it is affecting
    as there are some 3rd party add-ins are affected as well.
    Please advise how we can fix this without needing to re-install Microsoft Office.  Thank you!

    I don't have 365 or C2R so I can't address your main question, so just a few thoughts which may not be applicable in your setup.
    Check the addin manager to see if your addins are listed and ticked. If listed (ticked or not) check the registry to see where the location is written, if ticked look here
    HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Excel\Options
    and look for keys named OPENx, where x is the order number the addin is loaded
    if not "ticked" instead of \Options look in \Add-in-Manager
    With a VBA macro or in the VBE's immediate window return
    Application.LibraryPath 
    Assuming you found a listing in the registry do the paths match, if not look in the .LibraryPath to see if the addins got unloaded there into the subfolder \Analysis
    If you find the file(s) try un-installing and reinstalling the addins, but browse to the actual folder don't simply tick. If you can't find the files, copy them (from a different system) to the folder indicated by .LibraryPath. In the addin manager uninstall
    them if installed, close the manager, open it again and the addins should be listed, tick to re-install.
    You say your other addins don't work, I wonder if some mixup has occurred with what Excel thinks is the default path, but note for other addins the default addins path is returned by app.UserLibraryPath
    Are you using a Chinese system?

Maybe you are looking for