CRS Script: AutoAttendant option overlapping with internal extension

I'm trying to have an AA.aef script with five options, you know something like: press 1 for Marketing, press 2 for Management, ....and press 5 for Customer Service. The problem is that the internal phone extensions start with 5xxx. Is there a way to have the fifth option on the aa menu and also allow the caller to dial the extensions directly?

you can use 5 as your option however when you are using 1-5 or the 5xxxx you do a check so you should either use 5xxxx or use one of the 5 extension on the main menu and chose a option for dial by name or extension.
selection 1 can be sub menu and any other 5 digit will be your extions.  The best practice is to seperate out the direct extension dial to a sub menu and have main menu with top options 1,,2,3....so on.
If you are good with CRS you can get direct dial and all 5 options but its bit work and lot of script work not really recommended and in long run its not worth it.
hope it helps. Please rate helpful posts.

Similar Messages

  • Overlapping of an Select-Option Field and the Extension Button.

    Hi,
    I have declared a Select-Option as follows:
    Tables:  agr_define  .
    select-options: s_role for agr_define-agr_name obligatory
                                                 no intervals .
    It is not throwing any error.
    If I execute this program, On the selection screen, I find one field where I can enter the Role and an extension button to enter multiple roles.
    But the F4 help overlaps on the Extension Button and the customer wants this overlapping to be removed, I mean this F4 help button and the Extension button should not overlap with each other.
    Can you help me acheive this.
    Thanks and Regards,
    Ishaq.

    Boss,
    You cannot avoid that overlapping.
    yes, one can change the system screen 1000.
    but, in future it will definitely create problems like if you add any extra field and if are using that code in some other server it will never get reflected.So, will you go to Screen 1000 of that server and change the screen attributes again??
    okay even i would like to find the answer for that.
    If you find the solution, do send me the real answer in this same thread.

  • I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
    Thanks,
    Shir

    sbmgrams wrote:
    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
    See here:
    Reading PhotoDeluxe PDD Files

  • MacPro 5,1 - 6 Hard Drives (with internal Superdrive)

    I'm throwing this out there because I searched for a long time for an EASY way to set up 6 hard drives in the MacPro case.  This is how I did it.  I'll throw some comments in at the end for anyone interested and also what I would have liked to have done differently.  (there aren't any pictures, but I'll put up links to what I used)
    Parts List:
    2.5 inch Sata II hard drive - Western Digital 160GB (Scorpio Black)
    3.5 inch Sata II hard drive - Western Digital 2 TB (Caviar Black)
    Optical Bay Mount - OWC Multi Mount - http://eshop.macsales.com/item/OWC/MM352A52MP9/
    Sata II Internal RAID PCIe Card - Vantec - http://www.amazon.com/gp/product/B004QY7M9I/ref=oh_details_o01_s00_i00
    Sata power splitter - StarTech - http://www.amazon.com/StarTech-com-PYO2SATA-Power-Splitter-Adapter/dp/B002N2EHVQ
    7pin Sata data extension cable - http://www.ebay.com/itm/120999365424?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m143 9.l2649
    1m 7pin Sata female to female cable - http://www.ebay.com/itm/221046259401?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m143 9.l2649
    Setup:
    1.  Pull your optical bay sled and install your two drives using your chosen mount.
    2.  Install your PCIe RAID card with internal Sata II ports.
    3.  Remove the power supply cable cover (I think that's what it's called; it's the plate immediately behind the optical bay sled, comes out with two screws)
    4.  If you have a hard drive installed in Bay 1, remove it from the case and out of your way.
    5.  Run your 1m Sata data female to female cable from your RAID card, under the top-most portion of your PCIe fan (do not remove the fan), and follow the bundled cables up through the divider, and in front of the optical bay doors.
    6.  Replace the power supply cable cover, being careful to route the Sata cable along with the other cables, and re-secure cover.
    7.  Connect Sata data splitter to Mac lower Sata connector.  You will have to do minor fabrication to the splitter to allow it to fit.
    8.  Connect the 7pin Sata data extension cable to Mac lower Sata connector.  You will have to do more minor fabrication to the splitter to allow it to fit.
    9.  Carefully replace your optical bay sled and begin connecting cables.  You should connect your superdrive to the Mac upper Sata connector first.  You should then connect the power splitter to both drives.  Then connect your Sata data cables to both drives.  You may have to adjust the position of the optical bay sled to adequately connect all cables.
    10.  Replace anything you removed (like your Bay 1 hard drive), and close up your tower.
    11.  If needed, install drivers for your PCIe card.
    12.  That's it, you're done.  Take note that if your RAID card does not have boot capability, you will only get boot functionality out of the drive that you connected using the data extension cable.  The drive you connected to the RAID card will only have boot capability if your card supports it.
    My present computer:
    MacPro 5,1 - Quad core Xeon 2.8GHz
    Hard drive 1, 2 - 64GB Striped RAID for Scratch Disk
    Hard drive 1, 2 - 900GB Unused (trying to convert at least half to a Windows XP drive, but that's another issue)
    Hard drive 3, 4 - 2TB Striped RAID for Main Data
    Hard drive lower - 160GB 2.5 inch Boot Drive
    Hard drive external (PCIe) - 2TB Time Machine
    Not including hard drives, we're talking about $60.  I wasn't sure if this combination of items was going to work out, so I wanted to keep the dollar total low.
    In retrospect, if I'm being totally honest, I should have just done what everyone said and used an external drive for time machine (or whatever 6th hard drive I wanted).  Here's why:  My RAID card doesn't have boot functionality, which I didn't think would matter.  I planned on using the drive connected to the RAID card for my Time Machine.  Everything works great, except I can't boot from my homemade OSX USB recovery drive and use Time Machine for a restore.  This is because the RAID card drivers aren't on it.  I could probably make a workaround, but I will just use my external clone if I ever need to do a full restore.  Had I used an external FireWire 800 enclosure in the first place, I wouldn't have had to worry about it.
    Notes about cables:
    Don't buy the cheapest ones you can find on eBay.  After fabricating my data extension cable, the L-shaped portion that the connectors lay on broke off inside my Mac's connector.  I threaded the connectors back in, but for now, the two are married with electrical tape.  Not very pretty, and a big reason why I didn't take the system apart to make pictures for the guide.
    Know what lengths you need.  I kind of guessed about lengths.  The data extension cable should preferably be the same length as the power splitter.  Unfortunately my power splitter was a little long, and my data extension cable was a little short.  This created the need to bend them excessively so that I could cram them into the little space that was left.  This caused my above issue in which one of the connectors broke.
    OWC MultiMount:
    This is what started my quest in the first place.  This product existed, so clearly there must be an answer for how to do it.  You can fit two drives in the lower bay, so you should do it, right?  I love OWC, but this mount is pretty junky.  It works, but it's not OEM styled.  The material they use (which they say is aluminum) is very flimsy.  I had to bend it back into position in several places to make the brackets line up.  There's no sound from the bracket while the machine is running, which is good.  But I was surprised at how seemingly low quality this mount was.  I would have been much happier with a machined aluminum mount with rubber grommets like the stock hard drive sleds.
    A word about which mount you get:  You will be much happier if you mount 2 2.5-inch drives in the lower bay (at least in a vertical configuration).  You'll have more space to work with, and other than price, there's no reason to stick a 3.5-inch drive in there (unless you're cheap like me).
    When all is said and done, I'm happy that I got 6 Hard drives crammed into my case.  I'll never (hopefully) outgrow my system.  I have 2TB of data storage (which I doubt I'll surpass).  I've got a boot disk that's plenty large, I've got a scratch disk that's super fast, and I've even got some additional high-speed hard drive space I'll hopefully get a Windows partition onto.  The better option though, would be to put one hard drive in that bay.  Skip all the add-ons, and get an external FireWire 800 enclosure.  Dedicate one port on the rear of the tower to it, and stash it out of sight.  It's exactly the same but easier to remove.
    Feel free to ask any questions.  I'll do my best to answer them.

    Have you checked this site? They are out of stock at the moment, but more should arrive soon:
    http://store.apple.com/au/browse/home/specialdeals/mac

  • Files with .ejb extension

    Hi,
    I am using the <javadoc> task in an Ant build file. I have several EJB files with th extension .ejb that I want to have included in my javadocs.
    I have the following code:
    <target name="javadoc" description="Build Java Documentation">
            <javadoc destdir="${doc.dir}">
                    <fileset dir="src">
                            <include name="**/*.ejb" />
                    </fileset>
            </javadoc>
    </target>However, when I run this I get the following error:
    [javadoc] javadoc: Illegal package name: "C:\src\com\test\ejb\CommandInputEJB.ejb"I do need the .ejb file extension for another tool to work (Ejbgen). Is there a way to get this working?
    Thanks in advance for any help!
    Arjan Huijzer

    Hi Arjun
    I'm still learning all of this myself with Ant, but looking at your script, it does not appear to be complete. I understand that you need to have certain tags included. The Ant task documentation gives good information, but in brief, in the list of parameters, the required options are indicated. Your script as a minimum, must include either '<b>sourcepath</b>', '<b>sourcepatheref</b>', or '<b>sourcefiles</b>' and you then must include '<d>destdir</b>' (which you already use).
    You can find the documentation here:
    http://ant.apache.org/manual/CoreTasks/javadoc.html
    I have never included external files such as the EJB ones you are using, but I have written my own script for generating JavaDoc HTML output. Feel free to use it if it helps.
    It uses an external file for the package list (sourcepath), called from the property:
    <i> <property name="JDOCSOURCELIST" value="JDOCSourceList.properties" /> </i>
    This is the same as the -sourcepath option of the standard JavaDoc docelt. It is formatted:
    <code>
    com.supersaus.server
    com.supersaus.server.factories
    \\\\S5\\Documentation\\com\\supersaus\\common\\Association.java
    \\\\S5\\Documentation\\com\\supersaus\\common\\CData.java
    </code>
    Other properties used in the script are:
    <code>
    <property name="JDOCDIRECTORY" value="JavaDocOutput" />
    <property name="SOURCECODEROOT" value="\\\\S5\\Documentation" />
    <property name="STYLESHEET" value="./stylesheet.css" />
    <property name="BOTTOM" value="Supersaus 2004" />
    <property name="DOCTITLE" value="Supersaus Common Files" />
    <property name="LINK" value="http://java.sun.com/j2se/1.4.2/docs/api" />
    <property name="OVERVIEW" value="doc-files\\Saus_Overview.htm" />
    </code>
    The main ant target is built up as follows:
    <code>
    <!-- Generate the JavaDoc HTML. -->
    <target name="BuildJavaDoc">
    <splash/> <!-- Add Ant progress bar -->
    <echo message="Please wait whilst the document is generated into the folder ${JDOCDIRECTORY}" />
         <!-- call javadoc -->
         <javadoc destdir="${JDOCDIRECTORY}"
         sourcePath="${SOURCECODEROOT}"
              packageList="${JDOCSOURCELIST}"
              maxmemory="180M"
              stylesheetfile="${STYLESHEET}"
              bottom="${BOTTOM}"
              Doctitle="${DOCTITLE}"
              Windowtitle="${DOCTITLE}"
              Overview="${OVERVIEW}" >
              <Link href="${LINK}"/>
         </javadoc>
    </target>
    </code>
    Hope all this helps?
    Best wishes and good luck
    Supersaus

  • ADT packaging with native extensions : permission denied error when running remote build.

    Hi Team,
    We are facing the following error when running the nightly ant build script on Mac machine for our air mobile application. We are using iOS native extensions and package with ADT. This works fine when we run the build as local user in the Mac machine. Earlier we faced some issues due to headless build and we have added the <headless-server>true</headless-server> in corresponding config files (flex-config.xml, airmobile-config.xml). After that we are facing the following error, even when we run the ant build in headless mode using the following command.
    ant -Djava.awt.headless=true -f build.xml buildPackage
    When running this build as local user in the Mac build machine, we see a window opening with com.adobe.air.ADT while packaging. This is the issue when running nightly build as there is no graphics window.
    Can anybody please help how to get rid of this issue for nightly build using adt,jar?
    Here is the error from build log:
    buildiOSPackageWithNativeExtensionMac:
         [echo] Export the iOS package with Native extension for ApprovalsMobile in Mac
         [java] Exception in thread "main" java.lang.InternalError: Can't connect to window server - not enough permissions.
         [java]  at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         [java]  at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1827)
         [java]  at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1724)
         [java]  at java.lang.Runtime.loadLibrary0(Runtime.java:823)
         [java]  at java.lang.System.loadLibrary(System.java:1045)
         [java]  at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
         [java]  at java.security.AccessController.doPrivileged(Native Method)
         [java]  at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
         [java]  at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
         [java]  at java.awt.Dimension.<clinit>(Dimension.java:70)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator.validateImageUri(ApplicationDescri ptorValidator.java:183)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator20.validateElement(ApplicationDescr iptorValidator20.java:121)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator25.validateElement(ApplicationDescr iptorValidator25.java:65)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator26.validateElement(ApplicationDescr iptorValidator26.java:62)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator30.validateElement(ApplicationDescr iptorValidator30.java:52)
         [java]  at com.adobe.air.validator.ApplicationDescriptorValidator31.validateElement(ApplicationDescr iptorValidator31.java:46)
         [java]  at com.adobe.air.validator.DescriptorValidator.endElement(DescriptorValidator.java:239)
         [java]  at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.endElement(AbstractSAXParser .java:601)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XML DocumentFragmentScannerImpl.java:1782)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(XMLDocumentFragmentScannerImpl.java:2939)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImp l.java:648)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScanne rImpl.java:140)
         [java]  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDo cumentFragmentScannerImpl.java:511)
         [java]  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:808)
         [java]  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.ja va:737)
         [java]  at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
         [java]  at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java :1205)
         [java]  at com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$JAXPSAXParser.parse(SAXParserImpl.j ava:522)
         [java]  at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
         [java]  at javax.xml.parsers.SAXParser.parse(SAXParser.java:198)
         [java]  at com.adobe.air.Descriptor.validateXML(Descriptor.java:182)
         [java]  at com.adobe.air.Descriptor.<init>(Descriptor.java:56)
         [java]  at com.adobe.air.ApplicationDescriptor.<init>(ApplicationDescriptor.java:84)
         [java]  at com.adobe.air.ApplicationPackager.validateApplicationDescriptor(ApplicationPackager.java: 101)
         [java]  at com.adobe.air.ApplicationPackager.createPackage(ApplicationPackager.java:64)
         [java]  at com.adobe.air.ipa.IPAPackager.createPackage(IPAPackager.java:217)
         [java]  at com.adobe.air.ADT.parseArgsAndGo(ADT.java:557)
         [java]  at com.adobe.air.ADT.run(ADT.java:414)
         [java]  at com.adobe.air.ADT.main(ADT.java:464)
    Thanks,
    Swathi.

    Note: Before the above error that were two other errors .
    1) The build complained that the adt-bundle-linux toolchain could not be found and required that it be added to .mozconfig. This was done.
    2) The build complained that dx could not be found.
    The configure file was edited and the values $DX, $AAPT and $AIDL were all set to the adt-bundle-linux/sdk/build-tools/android-4.4 path.
    The instructions given on the Mozilla Wiki did not work right for Android and several modifications were made to move it along. But this permission error is tough to figure out.

  • IPhone Jabber client not showing internal extensions just the Alerting Name

    I have customer calling from a 7965 to his desk phone 7965 which shows both Alerting Name and Extension, he also has an iPhone/Jabber Client on WiFi (no cellular involved). The iPhone client shows the Alerting Name from the 7965 but doesn’t show the 4 digit internal extension. Is this a known issue?

    Dear Miro,
    The issue has nothing to do with the server it's the client, Lync 2013 issue with caching data and the way its reading it back from the cache.
    Work around:
    just create a new client policy using the command new-csclientpolicy with AddressBookAvailability  "WebSearch" only.
    "New-CsClientPolicy -Identity TestCsPolicy -AddressBookAvailability WebSearchOnly"
    assign the policy to your test client, delete cache folder at the client end.
    "Grant-CsClientPolicy -Identity MIRO -PolicyNameTestCsPolicy"
    "you can delete sign-in information by signing out and clicking on "delete sign-in info" then sing-in again"
    test again. it should work.
    if it didn't open contact card and check if the the client is getting the data correctly.
    yet i didn't find another fix to the issue with lync 2010 client everything works just fine without any changes.
    Regards,
    Nader Barakat

  • How to order a Macbook Pro in the USA with international english keyboard?

    Does anybody know how can I order on the US Apple Online Store a new (2011) Macbook Pro with international English keyboard?
    I don't see any possibility for that on the online store's webpage. I tried to contact an expert with the online chat support, but the link does not appears for me.
    Thanks for your help in advance!

    Kappy wrote:
    No. The US store does not provide anything but US or Spanish (I think) keyboards. You have to order from the UK store to get an English keyboard.
    The current options available online are U.S. English, Western Spanish, French or Japanese keyboards. You might try calling 1-800-MYAPPLE to speak to someone. It's possible you might be able to get something else as a BTO option.

  • How to create a Business Partner with internal number assignment

    Hello,
    We are using a CRM 7.0 system. We want to create a new Business Partner using LSMW. We chose IDoc basic type CRMXIF_PARTNER_SAVE_M03 to perform it. We want to create it with internal number assignment (we don't have BP ID or BP GUID). Unfortunatelly, when we leave PARTNER_NO and PARTNER_GUID fields empty, we get an error message that we should supply at least BP ID or BP GUID. So what values should we enter in order to create a BP with internal number assignment?
    Please put attention that we also don't want to enter any alternative external number because we don't want the end user to see after in the WebUI.
    Thanks in advance,
    Sergey Kozyrev

    Hello,
    Standard CRM PC UI application offers three options when you push 'New' button: 'Person', 'Organization' and 'Group' (combobox appears). In your case, 'Person' should be selected.
    p.s. If you don't see combobox mentioned above, it could be security issue.
    Kirill

  • HT4642 how do I save with file extensions in 09.

    Numbers 08 had a check box to save a file with the extension (it didn't always work when saving to pdf) but 09 doesn't save the file with the extension (.numbers) by default and doesn't have an option to save .pdf when saving as a pdf. Is there a way to change this or is it not necessary? I'm worried that some clients with older versions may not be able to open the file without the extension.

    Hello blinkless,
    Numbers is capable of exporting to a variety of different formats (each with the appropriate extension).
    Export in PDF, Excel, CSV, or Numbers ’09 file formats
    Choose File > Export To > [file format] (from the File menu at the top of your computer screen).
    Save a spreadsheet in another format
    http://help.apple.com/numbers/mac/3.2/#/tan886afc61b
    Cheers,
    Allen

  • DO NOT import images with no extension

    If you import import images with no extension (I have lots of those from Mac OS 9 days) by reference and then consolidate them with the Move option you will encounter a serious problem (at least with Aperture 1.5.1. on an Intel Mac).
    If you quit Aperture and launch it again, the thumbnails for those images will show as being referenced and broken. But another part of Aperture believes that they are in the library. The result is that your images ARE in the library, but are unaccessible to Aperture.
    You can repair this by fixing the contents of the apfile and renaming the image file, but it is a major pain to do this on a large scale.
    Here is the problem I encountered:
    http://homepage.mac.com/bagelturf/files/dbe9ea5dec3f703abb4efece1249d894-682.htm l
    And here is the solution:
    http://homepage.mac.com/bagelturf/files/8a3a218630e2b36136612e19b4495ba6-683.htm l

    Which version?
    This is not my experience in 1.5.1: files without extensions are silently ignored, no? That's annoying enough!
    Unfortunately, I have a lot of Genuine Fractals files that can't even be catalogued, let alone viewed. I have to keep using Portfolio, which deals with GF files just fine.

  • Trying to create MPEG-2 with .mpg extension

    A client requires an MPEG-2 file with .mpg extension, less than 10 Mbps bit rate, twin channel mono audio.
    Can I create this in compressor from a .mov?
    If I choose multiplexed audio and then manually change the extension from m2t to mpg will this work? (the client will playback in a solid state mpeg player)
    Also - I am working in PAL and they require a 1024x576 pixel file: when I select 16x9, will this give the correct setting (assuming my source material is anamorphic)?

    Since the client asks for MPEG-2 with .mpg extension, I guess they really mean .mpeg as gogiangigo mentions. In other words, they want an MPEG-2 Program Stream.
    Compressor 3 User Manual: page 60:
    • m2t: Represents MPEG-2 transport stream.
    • mpeg: Represents MPEG-2 program stream.
    Compressor 3 User Manual: page 183:
    About Elementary, Transport, and Program Streams
    There are three common MPEG-2 stream types that are used to deliver MPEG-2 encoded video:
    • Elementary streams: These streams contain only one MPEG-2 content channel and no audio. Elementary streams are required if you intend to use your MPEG-2 encoded video as a DVD Studio Pro asset.
    • Transport streams: These streams can contain several MPEG-2 content channels and associated audio. All the channels are multiplexed together, allowing the receiver to choose which to play back. Compressor supports creating single-channel transport streams that can optionally include associated audio. Transport streams can also recover from interruptions during playback, making them ideally suited for broadcast and streaming applications where noise or network congestion can lead to interruptions.
    • Program streams: These streams contain only one MPEG-2 content channel and its associated audio. Program streams require an error-free delivery method and are primarily used for storage or processing within a computer. By default, the Compressor MPEG-2 encoder creates elementary MPEG-2 steams. You can configure the MPEG-2 encoder to create transport or program streams and choose whether they should include audio in the Extras tab. See “Extras Tab” on page 197 for more information.
    Note: All the Stream Usage settings except Generic output elementary streams. If you select any of the other Stream Usage settings and then configure the output to be either a transport or program stream, the Stream Usage changes to Generic. See “Stream Usage” on page 185 for more information.

  • The port range is overlapped with rule X message - SRP521W

    Hello,
    I am having trouble adding a NAT port forwarding rule on my SRP521W. I get the error
    The port range is overlapped with rule X, even though my port ranges are not overlapping.
    I have this rule created (rule 2):
    and am trying to create this rule:
    I get this error
    It seems to be related to the fact that both internal ports are 80, but this should not matter as the internal IP addresses are different. Can someone please explain how I should create rules to allow me to open ports to two different devices, with different IPs, using port 80?
    Many thanks

    Oh wow!  That is an extremely old release.
    I would certainly recommend upgrading straight away.
    Latest release is 1.1.27 and is available via www.cisco.com/go/srp500 - follow the download software link on the right hand side.
    When selecting code, follow the link for SRP520 Models (not SRP520-U)
    You should find that the latest code fixes your issue (and provides more functionality).
    Regards,
    Andy

  • Receiver file with 2 extensions

    Hi,
    I had once come across a blog for placing the file in the FTP folder with 2 extensions (say .txt and .xml).
    Not able to find it now, can any one help me in finding the same? or say how can it be done.
    PS: I do not need michael's blog of sender and receiver file name as the same one.
    Neither am I trying to write a script and do it at the OS level.
    Regards,
    Vishal
    Edited by: V Vishal Prabhakar on Aug 27, 2008 4:19 PM

    Hi check this blog
    Rename Attachment Adapter Module
    thanks
    hemant

  • Logo Overlaps with Data when viewed in HTML mode

    Hi,
    My report looks weird when I view the report in HTML mode i.e., my report logo overlaps with the report Row headers but when i view the same report in Java Applet mode report looks good and also when I export the report it looks good.
    I tried deleting the logo & adding a new logo & I even changed the settings of the logo & also I cleared cache of my browser, etc. I tired many options but nothing seems to work. Only couple of reports have this kind of issue & rest other reports looks good.
    Did anyone faced this kind of issue before? Is it a tool bug?
    FYI, I am using BO 4.0 SP5.
    FYI, I have created Logo by creating a blank cell in the Header of the report., then right click on blank cell and select “Format Cell”. In the formal Format Cell window click on Appearance and click on Radio Button “Image from URL” then type boimg://reportimage.jpg
    Thanks & Regards.
    Naveen.

    See if one of these program will kick it out of recovery mode:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Next, restore the the iPod and see if you can get any data off the restored iPod
    via How to perform iPad recovery for photos, videos
      Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official

Maybe you are looking for