The port range is overlapped with rule X message - SRP521W

Hello,
I am having trouble adding a NAT port forwarding rule on my SRP521W. I get the error
The port range is overlapped with rule X, even though my port ranges are not overlapping.
I have this rule created (rule 2):
and am trying to create this rule:
I get this error
It seems to be related to the fact that both internal ports are 80, but this should not matter as the internal IP addresses are different. Can someone please explain how I should create rules to allow me to open ports to two different devices, with different IPs, using port 80?
Many thanks

Oh wow! That is an extremely old release.
I would certainly recommend upgrading straight away.
Latest release is 1.1.27 and is available via www.cisco.com/go/srp500 - follow the download software link on the right hand side.
When selecting code, follow the link for SRP520 Models (not SRP520-U)
You should find that the latest code fixes your issue (and provides more functionality).
Regards,
Andy

Similar Messages

Data Transfer Port ranges in FTPS with SSL in File Adapter

Hi,
I would appreciate if you could give me pointers reagrding the below issue.
We are on XI 3.0.
For one interface, I have to configure the FTP File adapter to pick up the files from external server.
The connection is secure and should be FTPS with SSL.
I have the certificate from the 3rd party and have it installed on our XI development server.
The change has been made in our firewall to allow the connection to the host IP and port 21 which is configured at the target party as Explicit FTPS port and they have allowed access to our Server IP in their firewall.
I have configured other FTPS connections and they worked fine but this is the only one that has been giving me so much trouble.
The error i get today is:
Error occurred while connecting to the FTP server "60.234.48.106:21": java.net.SocketException: Connection reset
Yesterday, i got the below error:
Error occurred while connecting to the FTP server "60.234.48.106:21": iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
The Vendor has suggested to get the firewall ports 21 and 28000:30000 (data transfer) to be opened.
He has also provided with the certificate passphrase additionally to the user name and password needed to make the connection.
When i tried the connection from the XI development to the vendor server, via the Telnet, it looked like it worked.
Please advice.
Regards,
Archana

>
Archana Singhai wrote:
> Hi,
> I would appreciate if you could give me pointers reagrding the below issue.
> We are on XI 3.0.
> For one interface, I have to configure the FTP File adapter to pick up the files from external server.
> The connection is secure and should be FTPS with SSL.
> I have the certificate from the 3rd party and have it installed on our XI development server.
> The change has been made in our firewall to allow the connection to the host IP and port 21 which is configured at the target party as Explicit FTPS port and they have allowed access to our Server IP in their firewall.
> I have configured other FTPS connections and they worked fine but this is the only one that has been giving me so much trouble.
> The error i get today is:
> Error occurred while connecting to the FTP server "60.234.48.106:21": java.net.SocketException: Connection reset
> Yesterday, i got the below error:
> Error occurred while connecting to the FTP server "60.234.48.106:21": iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
> The Vendor has suggested to get the firewall ports 21 and 28000:30000 (data transfer) to be opened.
> He has also provided with the certificate passphrase additionally to the user name and password needed to make the connection.
> When i tried the connection from the XI development to the vendor server, via the Telnet, it looked like it worked.
> Please advice.
> Regards,
> Archana
1. Open the port ranges. FTPS usually requires you to open ports in the range of 65024 through 65535 for Passive FTP data
connections
2. Use the CA name in the certificate. it should be same as of the host name of the FTPS server

OC4J_BPEL no port available from the port range

To All,
We could not start our BPEL Process Manager and OC4J_BPEL. We have shut down and restarted the Linux server repeatedly and re-running the IRCA. All stacks are running except the OC4J_BPEL and BPM.
We keep receiving the following message when we start the BPM:
BPEL Process Manager
OraBPEL : OC4J_BPEL no port available from the port range
OraBPEL : OC4J_BPEL - failed to start a managed process after the maximum retry limit
OC4J_BPEL
OraBPEL : OC4J_BPEL no port available from the port range
OraBPEL : OC4J_BPEL - failed to start a managed process after the maximum retry limit
Our OraBPEL is on a single HP NetServer LH6000 with Red Head AS 3.0, Oracle 10g DB and AS middle tier all in the same machine. The server was running a batch BPEL process. After running 2 hrs and process 12,000 records it was brought down by a single runtime exception. We were able to bring back the Oracle 10g AS middle tier but not the OC4J_BPEL instance. Any help would be appreciated.

I changed the OC4J_BPEL port from 3201 to 3211 fix the problem. It was conflicted with the home instance that is using port 3201. However that still can not get rid of the OC4J-BPEL failed to start a managed process after the maximum retry limit.

OBI11g intallation issue - Error in validating the port range for auto port

I am using the intaller to install OBIEE 11g on my machine. When I get to step 6, I receive the error messages below. Currently I also have OBIEE 10g on my machine so the ports may be already used.
Does any one know how I can resolve this issue? I previously installed both 10g and 11g on my old laptop but I can't figure out why I'm getting these errors this time.
INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
INST-08010: Error in validating the port range for auto port allocation. At least 9 ports should be free within the range 9700-9999 for the BI System Components.
Ensure that a minimum of 9 ports are free within the range 9700-9999 for auto port allocation to work correctly for the BI System Components.

your hosts file have duplicate name that point to two different IP addresses.
10.37.29.1 test1.xyz.com
10.10.10.1 test1.xyz.com

INST-08010: Error in validating the port range for auto port allocation

Hello guys, I am using the installer to install OBIEE 11.1.7.0 on my machine. When I get to step 6, I receive the error messages below:
INST-08010: Error in validating the port range for auto port allocation. At least 2 ports should be free within the range 7000-7500 for the Adminserver and Adminserver SSL.
Ensure that a minimum of 2 ports are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and Adminserver SSL.
INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
My Operating System below:
Linux Red Hat 5.9 X86 64bit
My uname -a are below:
Linux redhat59 2.6.18-348.el5 #1 SMP Wed Nov 28 21:22:00 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
My /etc/hosts file are below:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1   localhost.localdomain localhost
10.10.80.19 redhat59
My /etc/sysconfig/network are below:
NETWORKING=yes
NETWORKING_IPV6=no
HOSTNAME=redhat59
GATEWAY=10.174.27.228
My /etc/sysconfig/iptables are below:
# Generated by iptables-save v1.3.5 on Tue Dec 3 17:01:17 2013
*filter
:INPUT ACCEPT [425:33860]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [307:40164]
COMMIT
# Completed on Tue Dec 3 17:01:17 2013
My ifconfig are below:
eth0      Link encap:Ethernet HWaddr 52:54:00:55:9B:C9
          inet addr:10.174.27.233 Bcast:10.174.27.255 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:200216 errors:0 dropped:0 overruns:0 frame:0
          TX packets:95849 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:110668992 (105.5 MiB) TX bytes:209784134 (200.0 MiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:109200 errors:0 dropped:0 overruns:0 frame:0
          TX packets:109200 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:257845896 (245.9 MiB) TX bytes:257845896 (245.9 MiB)
my /etc/sysconfig/network-scripts/ifcfg-eth0 are below:
# Virtio Network Device
DEVICE=eth0
BOOTPROTO=static
BROADCAST=10.174.27.255
HWADDR=52:54:00:55:9B:C9
IPADDR=10.174.27.233
NETMASK=255.255.255.0
NETWORK=10.174.27.0
ONBOOT=yes
Have any suggestion please?
Many Thanks
D

In setDomainEnv.sh set debugFlag=false or you can just remove it.
NodeManager is a charm after that. it can take any number of ports.
Cheers !!

[ERROR]:INST-08010: Error in validating the port range for auto port allocation

I am installing OBIEE 11.1.1.7.0 on a linux x86 version. I get the below error when running the installer: [VALIDATION] [ERROR]:INST-08010: Error in validating the port range for auto port allocation. At least 2 ports should be free within the range 7000-7500 for the Adminserver and Adminserver SSL. [VALIDATION] [SUGGESTION]:Ensure that a minimum of 2 ports are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and Adminserver SSL. [VALIDATION] [ERROR]:INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [SUGGESTION]:Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [ERROR]:INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). [VALIDATION] [SUGGESTION]:Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager). installation Failed. Exiting installation due to data validation failure. Solution suggested on other post is below: your hosts file have duplicate name that point to two different IP addresses. 10.37.29.1 test1.xyz.com 10.10.10.1 test1.xyz.com But in my case, My host file has different entiries as shown below: 169.36.71.228 usl20027808.am.hedani.net usl20027808 169.36.72.9 usl2002788.am.hedani.net usl2002788 Please suggest!

In setDomainEnv.sh set debugFlag=false or you can just remove it.
NodeManager is a charm after that. it can take any number of ports.
Cheers !!

No Port Available from the port range

Hi, Im getting "no port available from the port range" for the default_group/home/default_group process when I attempt to start opmn. I changed the port no through the application server control panel, and now I cant start opmn to change it back again! Could anyone tell me how to go about changing it back please?
The error report looks like this:
There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:no port available from the port range
==================================================
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:no port available from the port range
==================================================
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:no port available from the port range
==================================================
Can anyone help?

See the Oracle Application Server Administrator's Guide. Here's a link for the 10.1.2.0.2 version of the book:
http://download-west.oracle.com/docs/cd/B14099_19/core.1012/b13995/ports.htm#i1038905
Helen

I'm unable to utilize the Port Range Forward feature

on my WRT54G. When I enter the data and click Save Settings, I'm returned to the Port Range Forward page and none of the data has been retained. Please help.

Nevermind, I configured the wirelessly connected computer to a static IP and it's working now.

I had to return my first Ipad2, and now the new won't connect to itunes. I verified I had the latest itunes, used the new cable and verified the port worked by syncing with my ipod, I reloaded 10.2.2 and restarted my PC. Still won't work - thoughts?

I had to return my first IPad2, and now the new one won't connect to iTunes. I verified I had the latest version, used the new cable and verified the port worked by syncing with my iPod, I reloaded 10.2.2 and restarted my PC. Still won't work - thoughts?

Sorry - found a couple of good threads right after posting.

Foxfire downloaded an up-date last night (10 20/2010) at 5:30 PM EDST and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM

Foxfire downloaded an up-date last night (10/20/2010) at 5:30 PM EDST when I started Firefox, and it crashed the compter on re-start with an error message... Missing or Corrupt File ... WINNT\system32\config\SYSTEM. This machine is Windows 2000 Professional on Dell computer and Foxfire 3.6 or 4 not sure computer is stuck at the error message.

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

Is the WRE54G range extender compatible with the WRT300N wireless router?

I bought a WRT300N wireless router, hoping it would give me better range than my old hub. It's pretty good, but I still have dead spots in my apartment. I'd like to buy a WRE54G range extender, but I don't know if it's compatible. Anyone try this?

i don't think that the wre54g would work with the n-router .. rather i would suggest you to setup a wap200 or wap54gp wired to the router and configured as an AP ... if it still falls short of the wireless range .. configure another one in a repeater mode ...

HT5278 iOS 5.1.1 Software Update - I have just attempted to install this update on my 3gs and at the final stage was presented with an error message of 1602 and now my phone has frozen. Yes I have tried all the usual ways to resolve this and it didn't wor

iOS 5.1.1 Software Update - just tried to update and it didn't work! Got to the final stages and was presented with error 1602! My screen now has the frozen image of the itunes logo and usb thing. Happened once before - funnily enough when doing an update back in November - I had to visit an Apple store to have the phone restored. Would appreciate any advice as I would like to avoid another trip to the apple store.

found the real problem.
In my laptop where it couldn't detect the iphone and ipad, this folder is missing:
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers
The ipad was wrongly using a microsoft driver.
I found the correct drivers in:
C:\Windows\System32\DriverStore\FileRepository\usbaapl64.inf_amd64_neutral_c111a aecb61e9a2b
Copy the contents to
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers
After that, I had to update the driver for Ipad in device manager.
Ipad was found under: "Removable Devices", as a storage device.
Once that is fixed, itunes can detect ipad, and I can restore it.
Apple should really look into ensuring that folder doesn't go missing during itunes update process.

I installed the new update 7.0.1. When I open the program, a small box with an error message pops up: "---------- TypeError: Components.classes[cid] is undefined."

It has an OK button. When I click it the program opens.
Why is this? How do I get rid of it?
I have tried deleting, downloading the update again, reinstalling it twice. This didn't help.

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Where is the folder on my HD with all my messages from the program: Mail?

i need to back up all my messages- inbox,sent box,outbox,etc.

You will find it in /Home/Library/Mail/. Preference file is /Home/Library/Preferences/ folder. Alternatively, you can simply export to .mbox format or use Mail's archiving function.

Problem with Port Range Forwarding WRV54G

I have configured my WRV54G to do the following, in this order, on the Port Range Forwarding page of the router:
1. Forward port 3389 to LAN Static IP x.x.x.100, a desktop PC. I have confirmed this works, a port scan shows this port is open and I can remote desktop into x.x.x.100
2. Forward port 443 to LAN Static IP x.x.x.101. I have confirmed this works, a port scan shows this port is open I can VPN to an SSL concentrator at x.x.x.101
3. Forward port 3390 to LAN Static IP x.x.x.102, a desktop PC. THIS DOES NOT WORK. A port scan shows that this port is not open. I have configured the remote desktop host at x.x.x.102 to use port 3390. Netstat shows that x.x.x.3390 is listening on this port. I can remote desktop to x.x.x.102 from inside the LAN, no problem, so it's not an issue with the PX configuration.
So, then I switched the order of the port forwarding instructions, in this order, as follows:
1. Forward port 3389 to LAN Static IP x.x.x.100, a desktop PC. I have confirmed this works, a port scan shows this port is open and I can remote desktop into x.x.x.100
2. Forward port 3390 to LAN Static IP x.x.x.102, a desktop PC. I have confirmed this
works, a port scan shows this port is open and I can remote desktop into x.x.x.102
3. Forward port 443 to LAN Static IP x.x.x.101. THIS DOES NOT WORK. Port scan shows this port is not open.
It looks like the WRV54G is only recognizing the first two entries in the Port Range Forwarding table and IGNORING the third entry. HELP??!!
I have the latest firmware installed: v2.39.2e
Anyone have a solution? Thanks in advance!
Message Edited by crescendi on 07-19-2008 11:53 AM

Are you still using the DHCP server range of x.x.x.100 through x.x.x.149 ? If so, then your problem may be that you are using illegal fixed LAN IP addresses.
With Linksys routers, any fixed LAN IP address must be outside the DHCP server range, and it cannot end in 0, 1, or 255.
I would suggest that you fix the illegal addresses, then see if that resolves your problem.
Here is the full set of rules for using fixed LAN IP addresses:
With Linksys routers, a fixed (static) LAN IP addresses must be assigned in the device that is using the address. So you need to enter the fixed address in the computer or printer, not in the router.
When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255.
Therefore any fixed LAN IP address would normally need to be in the range of
192.168.1.2 thru 192.168.1.99 or
192.168.1.150 thru 192.168.1.254
assuming you are still using the default DHCP server range.
Also, in the computer, when you set up a static LAN IP address, you would need to set the "Subnet mask" to 255.255.255.0 and the "Default Gateway" to 192.168.1.1 and "DNS server" to 192.168.1.1
It is also important that no two devices on your network be set to the same static LAN IP address.

The port range is overlapped with rule X message - SRP521W

Similar Messages

Maybe you are looking for