SQL error when I execute a Bex report

Dear All,
I have a customer exit for an important BeX report. When the report runs, it throws me the below error.
"ORA-01795: maximum number of expressions in a list is 1000"
I understand this error and I refered note 568768 after going through the earlier forums. Everyone is suggesting to ask the Basis people to increase the tablespace and empty some filesystem and all. The Basis team at my end had a thorough check of the system and told that there is no such problem. Below is my customer exit ---:
WHEN 'EMPL_OP1'.
 IF i_step = 2.
 READ TABLE I_T_VAR_RANGE INTO loc_var_range WITH KEY VNAM = 'EDT_RFI'.
 select /BIC/CPS_EDATE /BIC/CPS_EFSQ /BIC/CPS_EMPL /BIC/CPS_EMPST
 from /BIC/ACPS_JOB00 into table it_job
 where /BIC/CPS_EDATE <= loc_var_range-low.
 LOOP AT it_job INTO wa_job.
 CLEAR l_s_range.
 l_s_range-low = wa_job-/BIC/CPS_EMPL.
 l_s_range-sign = 'I'.
 l_s_range-opt = 'EQ'.
 APPEND l_s_range TO e_t_range.
 clear:wa_job.
 ENDLOOP.
 refresh it_job.
 ENDIF.
The problem is occuring only in the line "APPEND l_s_range TO e_t_range" and there are no errors before that. That is - when 'e_t_range' is getting displayed. I never faced this problem for other reports and I am surprised why it is showing only records less than 1000. If my result set contains 1000 or greater records, it is giving the above dump. Guide me to optimise the code. I am sure someone might have faced this issue and were able to solve it.
Cheers........!!!!!
Srinivas

Hi,
Check this Note 996017 - More than 1000 entries in Selection.
Regards
Pcrao.

Similar Messages

SQL Error 58004. Executed SQL Statement

Hi experts, we working with SAP-MAM 3.0 database DB2E Version 9.1.2 , when I try install the MAM30 show me this message.
Please, Can i reinstall the DB2E application for fix this error, or there are other solution?
u2022 Excepción al tratar el métodoSMARTSYNC : com.sap.ip.me.spi.persist.IPersistenceException: char processor: SQL Error 58004. Executed SQL statement: [INSERT INTO M8_PROPERTIES("KEY","VALUE") values ('KEY_INCONSISTENT_DATA','X')] : char processor: SQL Error 58004. Executed SQL statement: [INSERT INTO M8_PROPERTIES("KEY","VALUE") values ('KEY_INCONSISTENT_DATA','X')]
u2022 java.lang.RuntimeException: SQLState:58004, error code:-1 : SQLState:58004, error code:-1
u2022

Moved thread to DB6 forum.

Error ODS activation - sql error when accessing a table.

Hi,
sometimes occurs an error by activation ODS. I have proces chain and when is loaded second packet an error occurs. In monitor>>
-RSMPC 128, datapacket 3 is wrong, with status number 9
-RSMPC 131
-RSDRO 108 - communcation error (sql error when accessing a table)
In sm21>
-sql error when accessing a table
-The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
either caught nor passed along using a RAISING clause, in the procedure "UPDATE_ATAB" "(FORM)"
Since the caller of the procedure could not have expected this exception
 to occur, the running program was terminated.
The reason for the exception is:
The database system recognized that your last operation on the database
would have led to a deadlock.
Therefore, your transaction was rolled back
to avoid this.
ORACLE always terminates any transaction that would result in deadlock.
The other transactions involved in this potential deadlock
are not affected by the termination.
I have BW 3.5.
Thank You very much.

There are a few different scenarios that I can think of where this might come up that all involve what might resulting in parallel (concurrent)processes:
Loading packets in parallel - that is there are X number of processes loading packets concurrently. This could be set in your IMG settings system wide or in the InfoPackage for just this datasource. You seem to indicate that you don't have this.
Database parallel processing - RSAMDIN - ORA_PARALLEL_DEGREE ( there was a different RSADMIN parm for older versions - forget what SP the change came with).
You have multiple InfoPackages for the datasource, each loading what should be a different range of data, and they run atthe same time.
You could be loading from two different datasources to the ODS at the same time.
If any of these are true, I would look at bumping the INITRANS setting up. Your DBA will probably need to do this for table and its indices. There is a Note - 831234 that allows you to create a parameter in RSADMIN that will specify a INITRANS value (e.g. 20) rather than using the default. The ODS would need to be activated to pick this new setting up for the table to be altered.
You could also look at the Processing settings for the InfoPackage and change to PSA first, then target to see if that helps.
Or if you are loading from two different datasources at the same time, you might adjust your schedule so that doesn't happen.
Pizzaman

How to execute BW-Bex reports from SRM

Hi
Anyone know if there is an easy way of execute BW Bex reports directly from the SRM interface? Or is the easiest way to have the users start the Analyzer seperatly.
We are running:
SRM 4.0 (webb interface)
BW 3.5
Thanks and regards
Pontus

Hi
Thanks for your reply.
I can run that TC from the BW but not from SRM. It just says that TC does not exist in SRM.
Best Regards
Pontus

[Windows] file.url throw error when application executable in root directory

Here is the bugbase ticked: Bug#3940278 - [Windows] file.url throw error when application executable in root directory
If you launch AIR application packaged as bundle from root directory and try to get url property of any file you get IllegalOperationError.
No matter what file url property you try to get.
It's a big problem when you distribute your application on CD disks or flash drive.
I'd like to ask everyone affected by this issue to take a minute and vote for the following bug.
Thanks.

I checked all deployment descriptions and there are no references to t3://localhost:7001. Few months back, I had the complete clustering setup working on 2 machines and now when I deploy my application on same configuration, it fails with t3://localhost:7001 unreachable error. I created a new cluster configuration on one machine with 2 managed server and it deploys fine. Can not figure out what has changed ?

Error when i execute the webservice /SAPAPO/SDM_PARCRTRC

hi,
I am getting this error when i execute the webservice /SAPAPO/SDM_PARCRTRC for product availability. please tell me where am i going wrong ..... ? wat parameters are missing ? how to interpret this error?
An error has occurred. Maybe the request is not accepted by the server:
XML Serialization Error. Object content does not correspond to Schema restrictions of type [http://sap.com/xi/APO/Global][/wsdl:definitions/wsdl:types/xsd:schema[3]/xsd:complexType[3]/xsd:simpleContent/xsd:extension/xsd:attribute[1]/xsd:simpleType].
Quick response will be appreciated

hi,
due to the bad formatting of your posting it is hard to read. you might consider to use the code tag to enhance readability. moreover, 'executing a webservice' is a bit a vague description of what you do. are you consuming this service with any client program and this is throwing the exception or are you testing the webservice with any 3rd party tool and this is a server error returned to you?
anyway, I think you ttry to consume that service from within ABAP and the error message says a lot despite of its bad readability:
The client ist serializing a message (creating it from parameters) and is provided some argument for a parameter which doesn't conform to the WSDL. E.g. the WSDL declares some parameter to be an integer and between 0 and 100 and you try to supply it the value 234. THis would most probably result in your erromessage. or the WSDL says integer and you provided it a string (e.g. like 'foo' or '234').
anton

Thiis error when I execute RSA3 on ECC. Any hints?

Hi Experts,
can you help me figure out how to fix this problem:
I am on an IDES system used by many for training. I am execute rsa3 and enter any of these datasources:
0fi_gl_4 or 2lis_11_vascl
and I get the following ABAP screen; any way to get the data extraction going?
Thiis error when I execute RSA3 on ECC. u2018----
screen -
(2) ABAP DEBUGGER CONTROLS SESSION 2(EXCLUSSIVE)
method IF_EX_RSU5_SAPI_BADI~DATA_TRANSFORM.
field-symbols: <wa_ZOXID30163> type ZOXID30163.
break-point.
case i_datasource.
 when 'ZMARA_DS'.
 loop at c_T_DATA assigning <wa_ZOXID30163>.
 <wa_ZOXID30163>-zztest = '123'.
 endloop.
endcase.
endmethod.
u2018----
Thanks

Hi,
Looking at the code it seems like there is no error but someone has put explicit Break point in the code, now you have two options,
1) Once you get the above screen just press F8 and let the extractor proceed. But everytime this will be manual process.
2) Remove the Break-point statement from the code.
As you said it is asking for Access Key, then get your developer key generated on service.sap.com or contact to your basis team.
Regards,
Durgesh.

Oracle warehouse builder error when I execute any mapping

oracle warehouse builder error when I execute any mapping:
I have installed OWB successfuly, It still no longer working correctly: it executed all the mappings, but it suddenly becomes incapable to execute any mappings in any project. It validates successfuly the mappings but in the execution it show the message :
" ora-06550 : ligne1 colonne19..."
please help me to correct this error.
thank you.

Make sure that there is no primary key or index on this table who exceed the limit.
For more information see
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_wm2.htm#105677

Error When I Executed RFC "SLD_NUC"

Hi Experts,
Iam Getting the Error When I Executed the RFC " SLD_NUC" As Follows
"program SLD_NUC not registered"
Here I Entered Gateway Host As My Host Name And Gateway Service As sapgw00
Please Let me Know the Solution
Points will be given
Regards
Khanna

Hi Anji,
I saw the Gateway Host And Gateway Service in Transaction code "SMGW" By Going to Goto >>Parameters>>Display.
This Gateway Host And Gateway Service Information I Entered in "SLD_NUC" RFC in SM59.
But the Same Error is Coming
Please Let me Know
Regards
Khanna

Error while connecting executing a webi report from Bex query.

hi all,
i need to create one webi report fron Bex query based on sab BW.
But when I execute the query its shows "Unspecified error invoking method or accessing property "on change DocID"".
i didnt get this msg.
please help

Hi Mohit Gupta,
Degrade the java version to java 7 update 45 and also degrade the java security level to low from medium. Also delete the java temporary files and also clear your IE browser cache as well.
This solved the issue for me.
Thanks,
Chaitanya Krishna

Active X Error when running web checkout/web reports

Hi,
I am installing BO Planning X1.5 against a SQL Server database.
However, I am getting an Active X error when trying to launch web checkout/web reports.
I get to the log on page and then get the error message:
"There was an error initializing the ActiveX client"
Do you know why this would be? (I am able to get to the web checkout/web reports from the server, however not on any client machine)
Thanks.

Hi Ravi,
from Note 917950:
Test Standard Web Template in BI (both directions)
This test will check the ABAP to Java and Java to ABAP communication. Additionally, this check will ensure that the new Java-based BEx Web runtime is working.
1. Run Report RS_TEMPLATE_MAINTAIN_70
2. Enter Template ID 0ANALYSIS_PATTERN
3. Choose Program / Execute
4. Choose Analyse / Validate
5. Choose Analyse / Execute in Debug Mode
A Web Browser is opened and you have to logon to the Portal. Finally, an empty Analysis Pattern (without data) should appear.
Error messages during executing Web Template
If only a blank screen or message "Access Denied" appears, see note 872043.
If message "Error while loading the Web template "0ANALYSIS_PATTERN" (return value "5")" appears, activate Content (see topic Additional Information below).
--> I think you have to activate the Content....
Activate Web Template of BI Content
Please perform the following steps to activate a Web Template of BI Content:
1. Logon to BI System
2. Start transaction Data Warehouse Workbench (transaction code RSA1)
3. Choose register Business Content (left pane)
4. Select Object Types
5. Expand BEx Web Template in tree (middle pane)
6. Double click on Select Objects
7. Choose 0ANALYSIS_PATTERN (or any other Web Template of the BI Content)
8. Object will be transferred to right pane
9. Press button Install / Install to activate the Web Template
Now, you can execute the activated Web Template.
Links:
"0ANALYSIS_PATTERN"
Re: template 0ANALYSIS_PATTERN returns errors
Error loading template 0ANALYSIS_PATTERN while broadacasting through WAD
917950 - SAP NetWeaver 2004s: Setting Up BEx Web
[SAP NetWeaver Setting Up BEx Web|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ca6de811-0c01-0010-43b2-c64584eef943]
Re: Question about Bex Web Setup
Regards
Andreas

Using SSRS local mode, receive invalid token error when trying to export the report when running in worker thread

We're using ASP.net with .Net 4, developing with Visual Studio 2012. We use SSRS 2012sp1 with local reports, so exporting the report ourselves instead of using a reportviewer control (and not using the SQL Reporting service). The reports are
executing fine when we export the report in the main thread, but if we spawn a worker thread and run a report there we receive the following error when calling Render():
Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
We only receive this when running a report that uses expressions on a separate thread. I've tried running the application pool under all the default built-in accounts (NetworkService, etc), and under admin user accounts to no avail.
This didn't occur with the previous version of our application which used .net 3.5.

As mentioned, we are not using the Reportviewer control, we are rendering locally. Not certain if that would make a difference.
Also, I had tried using all the built-in accounts. Just for kicks I changed it to LocalSystem again, then reset IIS (see image below). I then tried to export the report in a worker thread and received the same error.
Here is the text from the exception:
Microsoft.Reporting.WebForms.LocalProcessingException: An error occurred during local report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.ProcessLoadingExprHostException(ObjectType assemblyHolderObjectType, Exception e, ProcessingErrorCode errorCode)
at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.LoadCompiledCode(IExpressionHostAssemblyHolder expressionHostAssemblyHolder, Boolean includeParameters, Boolean parametersOnly, ObjectModelImpl reportObjectModel, ReportRuntimeSetup runtimeSetup)
at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(Boolean includeParameters, Boolean parametersOnly)
at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(ParameterInfoCollection parameters)
at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.CreateReportInstance(OnDemandProcessingContext odpContext, OnDemandMetadata odpMetadata, ReportSnapshot reportSnapshot, Merge& odpMerge)
at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.Execute(OnDemandProcessingContext& odpContext)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReportOdpInitial.ProcessReport(ProcessingErrorContext errorContext, ExecutionLogContext executionLogContext, UserProfileState& userProfileState)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReport.Execute(IRenderingExtension newRenderer)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension newRenderer, DateTime executionTimeStamp, ProcessingContext pc, RenderingContext rc, IChunkFactory yukonCompiledDefinition)
at Microsoft.Reporting.LocalService.CreateSnapshotAndRender(ReportProcessing repProc, IRenderingExtension renderer, ProcessingContext pc, RenderingContext rc, SubreportCallbackHandler subreportHandler, ParameterInfoCollection parameters, DatasourceCredentialsCollection credentials)
at Microsoft.Reporting.LocalService.Render(String format, String deviceInfo, String paginationMode, Boolean allowInternalRenderers, IEnumerable dataSources, CreateAndRegisterStream createStreamCallback)
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
--- End of inner exception stack trace ---
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WebForms.LocalReport.Render(String format, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WebForms.Report.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams, String area)
at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams)

How to troubleshoot SQL error when copying cube

I was successful in creating Info Package and running it to copy data frin cube 1 to cube2. However, I get an error when
Running the package. My source cube has 1.9 million rows. However, Info Package only loaded 30,120 records. Looking in monitor logs, it shows me following error stack:
System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
SQL Error 0
Unknown error in SQL Interface
Errors in source system
When I click on long text button for Unknown error in SQL interface:
The SQL interface of the application server (DBSL) has reported an unknown error. This error can be caused by:
- Overflows when aggregated data is read from the database in ABAP. If this occurs, the definition for the corresponding key figure must be changed.
- Internal errors
It seems to be some kind of Overflow error. Is there any way to get more information on the cause
Of this erroru2026.
THANKS A LOT.

I tried SM50, it shows me all processes, but I still cannot figure how to set developer trace. Following is detailed information on what I am doing in copy of cubes and errors I am getting:
Subject: Troubleshoot Copy of Cubes
I have tried to copy several cubes on my BI 7.0 and all of them same error, so I am wondering whether I am doing something fundamentally wrong.
                System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
                SQL Error 0
                Unknown error in SQL Interface
                Errors in source system
After error occurs I get following message in mail:
          The error occurred in Extractor.
           Refer to the error message.
                 Procedure
             How you remove the error depends on the error message.
                 Note
          If the source system is a Client Workstation, then it            is possible that the file that you wanted to load was being edited
at the time of the data request. Make sure that the file is in
the specified directory, that it is not being processed at the
I looked in SM21, system logs, whenever error occurs, I see the u201C
Database selection with invalid cursor &5&5
The database interface was called by a cursor (in a FETCH or CLOSE cursor operation) that is not flagged as opened. This can occur if a COMMIT or ROLLBACK was executed within a SELECT loop (which closes all opened cursors), followed by another attempt to access the cursor (for example, the next time the loop is executed).
I DO NOT UNDERSTAND WHEN I AM COPYING FROM CUBE, WHY SAP BW will generate u201Cinvalid cursoru201D message. Not sure whether it is normal, i.e., not a real error,
My cube copying (from cube 1 to cube 2) is a straightforward procedure:
a.     Select Copy from Cube 1 and create Cube 2.
b.     Create Export Data Source from Cube 1 Menu.
c.     From Cube 2 menu, Create Update rules, In update rules select DataSource as 8Cube1.
d.     Create an Info Package for 8Cube1 under Infosource/DataSource and then run the package.
Certain no of records e.g.. 3248 or so get loaded and then the error messages are generated, why?
Really appreciate any help. I tried SM37, does not give any clue. I also Tried SM50, it shows me the process, but I still cannot figure how to generate developer trace.
Since behavior is same for several cubes I tried, something else also needs to be done, I do not know what???

Receiving SQL Error: INTERNAL_ERROR while executing the query

Dear All,
I am receiving the below error while executing a query.
SQL Error: INTERNAL_ERROR
Diagnosis
The database system registered an SQL error. As available, the error number and a description are included in the short text. Possible causes for SQL errors include:
Overflow of database objects such as buffers, temporary tablespaces, rollback segments or data containers/tablespaces.
->These problems can generally be eliminated by system administrators.
Missing generated database objects such as tables or views based on inconsistent or inactive InfoCubes or InfoObjects. Examples of this include the view of the fact table for an InfoCube or the attribute SID table (X/Y table) of a characteristic.
-> These problems can generally be eliminated by a BW administrator.
SQL requests with incorrect content.
-> Problems of this type are generally programming errors.
System Response
Procedure
Contact your system administrator.
Procedure for System Administration
If there is no error description, look for one in the reference from the database producer.
Decide on the correct category for the SQL error and check if it can be eliminated. Generally the error can also be found in the syslog (transaction sm21). From there, transactions sm51 and sm50, the developer's trace log of the work process can be determined and the erroneous statement can be viewed in the log. This procedure is described in SAP Note 568768.
Notification Number DBMAN 257
I verified the table spaces and also done RSRV Repair of InfoObjects and InfoCubes and didnt find any error. But I am receiving this error for one particular month and remaining months are executing fine. Any ideas why i am receiving this error.
Regards
Ravi Y

OSS Note 1305568:
Symptom
A data mart query that
you want to execute within a data transfer process (DTP), for example, terminates with the
SQL error -1013 "Too many order columns".
The following is displayed in the monitor log of the data transfer process:
Error while extracting from source xxxxxx (type InfoProvider)
Message number RSBK 242
Exception CX_SQL_EXCEPTION occurred (program:
CL_SQL_STATEMENT==============CP, include:
CL_SQL_STATEMENT==============CM004, line: 32).
Message number RS_EXCEPTION 000
SQL error: POS(3306) Too many order columns
Message number DBMAN 257
Error reading the data of InfoProvider xxxxxx
Message number DBMAN 305
You have already implemented Note 1065380.
Other terms
CX_SQL_EXCEPTION, message number, RS_EXCEPTION 000, DBMAN 257, RSBK 242,
RS_EXCEPTION 000
Reason and Prerequisites
The MaxDB internal limit of 4016 bytes or 128 fields for GROUP BY columns was exceeded.
Solution
When you implement these corrections, no aggregation is performed for the data (GROUP BY) if the limits of the MaxDB database have been exceeded.
The limit values for the aggregation bahavior can also be manually reduced if there are problems with the default values.
Two RSADMIN parameters are provided for this.
MAXDB_MAX_GROUP_BY_FLDS is the maximum number of GROUP BY fields. The default value is 128.
MAXDB_MAX_GROUP_BY_LEN is the maximum total length of the GROUP BY fields. The default value is 4000.
SAP NetWeaver BI 7.00
Import Support Package 21 for SAP NetWeaver BI 7. 00 (SAPKW70021) into your BI system. The Support Package is available when Note 1270629"SAPBINews NW 7.00 BI Support Package 21", which describes this Support Package in more detail, is released for customers.

BW Server Error when running Query in BEx Analyzer

Hi All,
We are currently trying to run a custom Consolidation query in Bex Analyzer but coming across this error below.
We are on BI 7.0 (SAP NetWeaver 2004s), BEx Analyzer 2004s Release, Support Pack 9, Patch 4, Revision 372.
This error message is only occuring for certain custom consolidation queries and not all and does not occur for standard queries.
Does anyone have any advice?
Cheers,
Wiki
ERROR MESSAGE
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program CL_RSR_RRK0_SELECTION and form COLLECT_CHAFIX-02-(see long...)
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

Hi Wiki,
I am running into this error also. You marked the question as answered, did you apply the notes or did you find any alternate solutions?
Thanks,
Vedant

SQL error when I execute a Bex report

Similar Messages

Maybe you are looking for