Crystal crashes when tables are linked.

Hi, We have a Crystal Reports developer who is working with Crystal from a Citrix session. When he tries to join tables he receives a Data Execution Prevention error and Crystal terminates. What can be causing this error and how can it be fixed.
After the Citrix servers where restarted last week the error did not appear again until yesterday.

Hi,
One of potential reasons is DEP (data execution prevention) settings.
Click Start, click Run, type sysdm.cpl, and then click OK.
On the Advanced tab, under Performance, click Settings.
On the Data Execution Prevention tab, use one of the following procedures:
Click Turn on DEP for essential Windows programs and services only to select the OptIn policy.
Click Turn on DEP for all programs and services except those I select to select the OptOut policy, and then click Add to add the CRW32.exe (you have to navigate to CR 2011 executable)
Check below threads, It may help you.
http://scn.sap.com/thread/3245960
http://www.morovia.com/kb/PRB-Crystal-Reports-Crashes-Preview-Report-10079.html
--Praveen G

Similar Messages

How the tables are linked to each other in ERP and CRM?

Dear All,
Can anyone provide the info for the below query ?
"How the tables are linked to each other in ERP and CRM"
Quick response is highly appreciated.
Best Regards
Succhi

Dear Buijink ,
Thanks for the info.
Here in this table SMOFTABLES , it is giving the CRM adopter objects with R/3 tables . But my requirement is more on corresponding CRM Tables , the data fetching from R/3 tables will store in which CRM tables.To be clear the adopter objects extract the data from different R/3 tables but stores in to which tables?
Thanks in advance
Best Regards
Succhi

Why reports are fast when tables are available in local user

Dear All,
I have one report refering ws1,ws2,t1,t2 which are in user "test".
so in my qery of report i will write the query as
select a.code,b.edu,c.dept_name,d.desg_desc
from test.ws1 a,test.ws2 b,test.t1 c,test.t2 d
where a.code = b.code
and a.dept = c.dept
and a.desg = d.desg
The report is logged in by "user123" who is having select grant on all the above 4 tables.
Report runs but takes time.
But if i make the above 4 tables available in "user123" and write the query(removed user name in from clause) as
select a.code,b.edu,c.dept_name,d.desg_desc
from .ws1 a,ws2 b,.t1 c,t2 d
where a.code = b.code
and a.dept = c.dept
and a.desg = d.desg
and then report is logged in by "user123"
Report runs and takes considerably less time.
My understanding is when tables are available in current user it takes less time because it does'nt have to go to other user and search for the tables.
Is it correct or there are some other reasons for it.
Kindly advice
Best Regards,
Devendra

If the tables are owned by a user in the same database then there should be no difference in performance.

Crystal crashes when add new parameters to a stored proc in a subreport

This one has been driving me nuts so any help much appreciated...
I have a stored procedure (Oracle 9i) that is used as the datasource for a subreport (needs to be in the subreport as I need to pass multi-value parameters to the proc - something I've done in numerous other procs/reports). All of the parameters from the proc are linked to data/parameters on the main report.
The report works fine at the moment.
I need to add three new parameters to the proc with an If statement on each one to run various bits of code depending on what is passed in. This is where the trouble starts.
The proc works.
If I create a main report based on the new proc, it works.
If I create a subreport based on the proc and DON'T link it to the main report, it works.
If I create a subreport based on the proc and DO link it to the main report, Crystal crashes with no explanation (just that painful error that apologies for the inconvenience). It is not all the parameters that cause this problem - it's not even restricted to just the new parameters or even just to ones that are used in the IF statements.
This is not the first proc to do this to me - just the first one where the new functionality was too critical to strip out for now.
I have been trawling the net and trying all sorts of things for days so I am hoping someone out there has a suggestion!
Versions: Oracle 9i, Crystal Reports 11.0.0.1994

Hi Daniel,
Starting from the basics, after you've inserted the subreport don't link it yet. Edit the subreport and verify the database. Once it's verified, try linking the reports and adding a parameter.
Verify the linking you are using. I've seen where the field from the main report was passing invalid or coruupted data and caused the subreport to die a horrifying death.
Good luck,
Brian

Crystal crashes when trying to "Set Datasource Location"

Hi,
My client's Crystal app (version 9) crashes when she attempts to remap a report using the "Set datsource Location". Basically, as soon as she selects it, she gets a msg ..something like "CRw32.exe error" and the app bombs.
Any ideas on what may cause this folks ??
thx a lot,
Steve

Open the report up and Click on Database, Set Location, find ODBC in the list and connect using your DSN. Now select your DB and tables, varies so you may have just click on the OLE DB connection and the n DSN and click Update button or you may have to do this for each table also.

Firefox 22 crashes when clicking a link in a thunderbird 3.011 email

I updated to FF 22 a couple of days ago and found that when I clik on a link in a Thunderbird email FF doesn't start but immediately crashes. Safe-mode does nothing to help. If I start the browser first it seems to be ok. It is set as the default browser. The only thing that fixed my problem was reverting to FF 21.
Windows XP SP2
I've never had issues with FF so this is a new thing. I've tried reinstalling FF 22 and upgraded Thunderbird. It didn't help either.

We're sorry to hear that your Firefox is crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
#Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
#In that text field, enter %APPDATA% and press Enter. An explorer window should open.
#From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
#Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
#Open the most recent 5 files with a text editor and copy the IDs.
#Paste each ID with '''bp-''' into the reply window on the forums.
Thanks in advance!
You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

Crystal Crashes when exporting to PDF

Hi Experts,
Crystal reports crashes when exporting a report to PDF. I am using Crystal Reports for SAP Business One, what could be causing this..is it a patch level problem ?

Hi,
Please check this thread http://scn.sap.com/thread/3303863.
What is your B1 version and PL?
Thanks & Regards,
Nagarajan

When will Apple resolve the FCPX Crashes when Effects are added to a clip in timeline.

I have tried every route to get answers from Apple regarding system crashes when applying an Effect to a clip in the timeline. I am now getting more aware from posts in all sorts of Forum / Communities that this is causing VERY MANY users a problem.
It would only take 30 seconds for Apple to post a statement to let their users know what they intend or are doing to resolve together with an estimated fix time.
Come on Apple please SAY something at least.
F. Jackson

Here we go - I have another thread that I started the other day, but thought I'd continue this here. I just did an extensive test. Fred, you may be on to something here. I'm beginning to think some of this is only happening if you are:
(a) running the Trial version
(b) Motion is NOT installed
(c) and it may be that the 10.0.1 update has created this problem, although surely Tom and Andy are running that update...
...or some combination of the above. Anyway...
New iMac i5 quad-core 12mb RAM - new machine with total stock config - only Apple software except for Office 2011.
FCP X Trial version, Motion is not installed
I've tried a variety of clips, but to eliminate variables, for this test I just used clips from a Canon 60D. They were imported from the card and converted to ProRes by FCP X.
Again, these crashes only relate to using the Inspector with certain Effects. If the Inspector is closed, I can apply these Effects and they play back flawlessly. However, once I've applied them and selected the clip, clicking the Inspector button causes an immediate Quit of FCP. And, if the Inspector is already open, just applying the Effect to any clip causes an immediate Quit.
These are the Effects that cause the crash (for me) by category:
Blur - Radial, Zoom
Distortion - Earthquake, Fisheye, Fun House, Glass Block, Mirror, Scrape, Water Pane
Keying - Image Mask
Lighting - Highlights, Side Lights, Spot
Looks - amazingly enough, all work except for Glory
Stylize - Censor, Halftone, Line Screen, Photo Recall, Pixellate, Vignette
Tiling - Kaleidoscope, Kaleidotile, Perspective Tile (but strangely just plain "Tile" DOES work)
So, this is approximately half of the supplied Effects. Interestingly, there is not a single category in which ALL of them work, nor one in which NONE of them work. And, by the way, doing this gave me a chance to check out every Effect - wow are there some cool ones I can't wait to work with. And, I got into this routine of highlight clip, make sure Inspector was open, double-click Effect, if no crash just CMD-z and repeat. I threw a lot of changes at it in quick succession and it handled it beautifully, except for the list above.
There is also a third party free effect from Alex4D called Smooth Move. It looks fantastic! It allows Ken Burns-like scaling which somewhat alleviates the weird animation that results if you scale and move at the same time with keyframes, BUT it allows the flexibility to NOT have the move span the entire clip like Ken Burns does. Oops, sorry, that Effect ALSO crashes the Inspector, so I can't access the controls. And, to keep this test pristine, I didn't try the Alex4D Effect on this test iMac, just on my Mac Pro on a clean system install.
Now, if Apple said (or says later) oh, wait, in the Trial version some of the Effects are not adjustable, but they are flawless in the paid version, I'd be fine with that. And, if you guys with the paid version and/or Motion installed say it works fine for you, I believe you :-). It's just that several of us were excited to get the Trial. I've been using FCP since 2003 and LOVE this new version. But, until you figure out that you can't use the Inspector with half of the Effects if you are using the Trial version, it just seems like the thing is unusable and crashes constantly - because it does.
Now that I know this, I don't think I've had a SINGLE crash otherwise - even on my "wrong" install on my MacPro with FCP7 and FCPX both on the boot drive.
David

Adobe Encore CS6 crashes when using dynamic link

I'm trying to use encore for the first time to create a wedding DVD. I'm trying to use the dynamic link feature from premiere pro but whenever I use it (I've tried intiating it from both premiere and encore) it crashes. When starting it from premiere it crashes right away but using it from encore it crashes when I want to create a new timeline from the sequence. Is there a way to stop this from happening? Also I don't really want to have to render the premiere pro file since it's quite large but if I have to I will. Thank you

I filmed it from a HD camera.
I tried to dynamic link a much shorter clip but yet the same thing happened from both programs. I even tried to make a timeline from in Encore with nothing in it and it crashed.
EDIT: I redownloaded premiere pro with encore and it seems to work now. Thank you for all your help though. Much appreciated.
Message was edited by: Nery21

Crystal crashes when using print or page setup

I am using Crystal Reports 2008 on Windows VISTA Business OS (32 Bit). Crystal crashes everytime I hit the page setup or print. Any suggestions would be helpful. I am trying to setup a landscape report but cannot even get into the page settings.
Randy Williams

Hi,
Please try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Now try again.
Regards,
Shweta

Mail Crashes when attachments are added

My mail application on my intel core iMac has just started crashing when I try to attatch a document.
Any one any Ideas?
iMac / eMac / Mac book pro/ intel core imac Mac OS X (10.4.4) Airport Extreme / Express / Belkin 54g PCMA card
iMac / eMac / Dell Laptop Mac OS X (10.4.4) Airport Extreme / Express / Belkin 54g PCMA card

OK. Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.
Also, try using a different method to connect to Internet, if possible, or connecting the computer to Internet as directly as possible, i.e. bypassing any routers that might be present, using an ethernet cable instead of wireless, etc., and see whether that makes a difference.
You may also want to take a look at the following thread, in case some of the suggestions provided there work for you:
Mail keeps hanging

CR2011 Crashes when trying to link tables

Every time I create a new report in CR2011 and try to link tables from my iSeries Access ODBC, CR2011 freezes for about 5 seconds and shuts down. I can create new reports using different databases like csv, xlsx, dbf, and mdb and it wont crash. If I use the iSeries ODBC with just 1 table and no linking, it wont crash.
The same ODBC works just fine with CRXI.
I can create a report with CRXI that has linked tables using the iSeries Access ODBC and save it. When I try to open it with CR2011, it works just fine. You can navaigate thru the different tables and modify the report without CR2011 crashing.
Event log:
Faulting application name: crw32.exe, version: 14.0.0.760, time stamp: 0x4d688f61
Faulting module name: ntdll.dll, version: 6.1.7600.16695, time stamp: 0x4cc7ab86
Exception code: 0xc0150014
Fault offset: 0x000845df
Faulting process id: 0x2d0
Faulting application start time: 0x01cc54600afd9a32
Faulting application path: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 81d30c82-c053-11e0-9e8e-70f39514a63b
I am running Windows 7 Professional
Core i5 650 @ 3.20 GHz
8.00 GB RAM
64-bit
I've done a sfc /scannow and no errors are reported.

Jason, I will post the Resolution here (correct me if any steps are no clear):
CRLogger Log files shows:
2011-8-15-12-26-53        4084      .\connect.cpp    2027      SQLDriverConnect succeeded: DSN = ********, User ID = ********, Password = ******** 10
2011-8-15-12-27-17        4084      .\odbcerror.cpp                63          Error: message = [IBM][System i Access ODBC Driver]Statement violates access rule: Connection is set to read only., sqlstate = 42000, native code = 30186        1
2011-8-15-12-27-17        4084      .\odbcerror.cpp                63          Error: message = [IBM][System i Access ODBC Driver]Statement violates access rule: Connection is set to read only., sqlstate = 42000, native code = 30186        1
It means permission issue.
The following registry key resolved the problem:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\Database\ODBC\
"AccessMode" as a Reg_DWORD 0x00000000 (0)
Here are the steps:
1. Go to Registry Editor (Click Start > Run > type regedit > OK)
2. Navigate to :
for 64 bit machine
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\Database
For 32 bit machine
HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\Database
3. Right click the Database registry key > select New > Key > name the key ODBC
4. Right click the ODBC key > select New > DWord value > name it AccessMode
5. Make sure the value is default: 0x00000000 (0)
6. Restart the Crystal Reports and try again.
Thanks to Product developers,
Vitaly

Crystal Crashing when many users

Hello,
I am having an issue with the code below:
            try
                crystalReport.Load(rptFilePath);
            catch (Exception ex)
                return("Error Loading Crystal RPT File (" + rptFilePath + "): " + ex.Message);
It works fine usually, but when I get many users trying to run a report at same time I get an Exception:
"Load report failed".
Furthermore once I get this exception it looks like no other users can run reports (as if the report component crashed).
I have to either reboot IIS or wait some time and it looks like the Crystal Component recovers on it's own.
I was warned that by using this free Crystal VS Component, I can only have max of 4 concurrent users calling it at the same time.
Is that the correct number about 4???
So I understand it is giving errors under heavy usage.
But it seems that t is also crashing after the first heavy usage and then no longer works after that.
Is there a way to make it recover without rebooting IIS or waiting a long time?
Thanks,
Yury

Hey Ludek,
Thank you for your response!
As far as:
2) You are launching too many Print Jobs (see below)
All my reports DO NOT have any Subreports. They just have Groups & Detail(s).
Output as PDF or Excel. So I do not think that it is issue, right?
1) You are not using .Close and .Dispose on the report objects once you are done with them.
I AM NOT using .Close and .Dispose so this sounds like the issue.
Please see my simple code below.
So do I just add 2 more lines at end?
            crystalReport.Close();
            crystalReport.Dispose();
Is that it or there something else I should be doing?
Thanks,
Yury
CODE
            ReportDocument crystalReport;
            string rptFilePath = System.Web.HttpContext.Current.Server.MapPath("~/Crystal/" + rptFileName);
            MemoryStream mStream;
            crystalReport = new ReportDocument();
            crystalReport.Load(rptFilePath);
            crystalReport.SetDataSource(DS.Tables[0]);
            mStream = (MemoryStream)crystalReport.ExportToStream(ExportFormatType.PortableDocFormat);

Firefox crashes when hitting certain links from my online banking page. the signature ID for my crash report is:memcpy | netssort.dll@0x2aef

Firefox is running fine on most all pages. But when I am logged into my online banking page and try to go to certain links, firefox will crash. I have run a scan with antivir virus protection and made sure I have the most recent firefox browser. Any help is appreciated.

Thank you for clearing that up. I have another idea. There is a feature called accelerated scrolling in Firefox, however there are also modules that might be associated with malware. Options > Advanced > General > Smooth scrolling (uncheck this to test)
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one. Windows 8 has antivirus [http://www.microsoft.com/security/pc-security/windows8.aspx#antivirus built-in] already.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Report crashes when table having lots of columns and rows, please help

Hi, Everyone,
Our system is Apex 4.0.2 with Oracle 11GR2 and Oracle HTTP server in the middle.
We have a very simple report drawing data from a table with 46 columns ( no binary data) , when the maximun rows is 500, everything is fine; but if I increase the maximum rows to 500000, it crashes repeatedly. We are doing third party database integration , our goal is using Apex simple reports with CSV exporting capability to export tables into text files which can be imported by other databases. I know there are other ways to export table into CSV file, but APEX report seems very easy to use, best of all, non programmers can use it too....
Our experience shows that: if the table has few columns, like 10 columns, we can use report to dump large number of rows like 200000, but we can't use APEX report for table with lots of columns. the HTTP server log doesn't show any meaningful information. ( we use the Apex Utilities like UNLOAD data with the same crash result).
Any suggestions are greatly appreciated.

"Disk cannot be read from or written to" error syncing iPod in iTunes.

Crystal crashes when tables are linked.

Similar Messages

Maybe you are looking for