Crystal Presentation Design 20011 and conditional formatting

Does anyone know if conditional formatting is supportted. I have a some cells with conditional formatting..ie.. some of the cells turns colorblue when certain criteria is met..I'm using a listview to show the range of cells but it's not coloring the cells blue when showing the view. Do I need to use anothe component? or is there a workaround? I've tried grid and spreadsheet table as well with no luck..any ideas?

I do not think it is supported. Xcelsius does not support Macros, if you are using VBA.
Edited by: Jan Bednar on Sep 22, 2011 1:50 PM

Similar Messages

  • Exporting from SAP Crystal Presentation Design to PowerPoint

    I have been using CrystalXcelsius Standard 4.5 with Windows XP for a couple years.  My company recently migrated to Windows 7.  I've been told the new version of Xcelsius I need to purchse is SAP Crystal Presentation Design which is supposed to be compatible with the new operating system.  I like the software as it seems to be what I need to continue creating Dashboards for my group.  However, after having difficuty exporting to PowerPoint as I have done in the past for general viewing, I've stumbled upon release notes that say though this software is compatible with Windows 7 operating system, it is not compatible with the PowerPoint software within Windows 7, and I must save the exported file in PowerPoint 2003.  However, when I open the PowerPoint document after exporting, the documement initially looks blank until I click Slideshow, then I get a "Securty Alert - Marcros and ActiveX" message that says "Macros and one or more ActiveX controls have been disabled" and I have to choose either "protect me from unknown content (recommended)" or "enable content".  I've been choosing the recommended option.  Once I do so the imported dashboard appears.  My initial question is am I performing the import correctly, and if so is there a way to get around that error message?  My management presents these dashboards to others both inside and outside the company and would prefer that the error does not keep popping up.
    Thanks much!
    Leanne

    Hi,
    First of all the message you are getting is not an error its an alerts.and its quite common. this is a standard check,if you want you can bi-passions(not recommended for all applications) this alert.
    Open a power point open Power Point Options ->  Trusted center -> Trust center settings ->  Select active X settings -> Select Enable all controls => Now select macro Settings and do the same.
    And you can avoid alert message.
    Good Luck & keep posting.

  • SAP Crystal Presentation Design

    I have recently purchased and downloaded SAP Crystal Presentation Design as this appears to be the first product that works with Windows 7 and Office 2010. However, every time I try hit the small icon to 'Send to Adobe Acrobat PDF' I get the following error message - 'Adobe Acrobat 9.4 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available'. Needless to say, Windows gives no solution to this problem!!
    Has anyone else encountered this problem and, if so, did you find a solution? The only remote possibility I can think of is that I also have Adobe Acrobat 9 Pro loaded on my laptop and use it frequently but I cannot believe this would create an Application clash.

    Hi David - SAP Crystal Presentattion Design 2011 was released on the basis it worked with Windows 7 and Office 2010 - the Version is 6.0.0.0 and the Build is 14.0.0.760. I mentioned in my question that the only potential issue I could see was that I also had Adobe Acrobat Pro 9 installed but assumed that Presentation Design came with an integrated version of Adobe which ran independently to anything I had on my laptop. As a last resort I ran the 9 Pro repair tool and it appears to have fixed the problem and I can now view the Presentation Design output through Adobe! Bizarre, I know but I also recall reading somewhere that users had experienced some Office Application issues after installing versions of Adobe Acrobat. Anyway, thanks for your input but the problem appears to be resolved (at least for now!)

  • Crystal Presentation Design install failure

    When installing SAP Crystal Presentation Design, an error pops up that says Windows XP or higher applications: Outlook, Excel, Word, etc. must be pre-installed". Then it says an error has occurred and the installation stops. Anyone have a clue?

    I have the same problem with Windows Vista Ultimate 32-bit and Office 2010. I have Microsoft Office Project 2007 on same computer. Installer says you must have Office XP or Higher and then terminates.
    I am not able to use the free software or evaluate the free trial when the software will not install on a pretty typical machine.
    Is theer any update or news on this? A workaround or other correction?

  • Full licensed version of SAP Crystal Presentation Design for FREE

    Hi,
    I've received the product  keycode [u2014 C551B-81JE03S-000ZJMA-9V6C] via email after downloading the SAP Crystal Presentation Design.
    http://events.businessobjects.com/forms/Q210/present/sap/
    Anyone managed to get the free Product Keycode working?
    When I enter the keycode I'm getting the error message:
    'The keycode you entered is not valid. Please try again.'
    I've installed it on Vista Enterprise SP1
    Thanks
    Nazmul

    Yes. It supports Vista
    System Requirements
    u2022     Microsoft Office XP or Office 2003~2007 PC with 1.0 GHz processor, 1GB RAM (recommended), and 350 MB hard disk space
    u2022     Microsoft Windows XP, Server 2003, or Vista
    u2022     Microsoft Office 2003, Office XP, or Office 2007

  • Activating SAP Crystal Presentation Design

    I have downloaded SAP Crystal Presentation Design and have it installed.  It is now asking for a keycode which I have entered from my Order Details but it is not accepting it as a valid keycode.  What is the next step?  Who should be contacted for help?
    Randy

    Open a ticket by SAP support:
    http://service.sap.com/support
    Regards,
    Stratos

  • SAP Crystal Presentation Design Upgrade failure

    When installing upgrade of SAP Crystal Presentation Design I get an Internet Explorer error "unable to load frame's content".   I am using IE 8.  It hangs and will not move forward.  Any suggesstions?

    Hi,
       Try running Crystal Presentation Design (aka: Xcelsius) with the supported Internet Browser Version.
    Supported Browsers (for Xcelsius 2008 up to SP3)
     Microsoft Internet Explorer 6.0 SP2
     Microsoft Internet Explorer 7.0
     Mozilla Firefox 2.0
     Mozilla Firefox 3.0
       Else you may want to try your luck and switch on Compatibility Mode for IE8.
          http://support.microsoft.com/kb/956197
    Regards,
    Ken

  • Crystal Presentation Design - Stacked Column Charts in 2 axis

    Is it possible to create dual axis stacked column charts in Crystal Presentation design or Dashboard Design?
    Thanks.
    Stine

    Hi Stine,
    As of today we dnt have that feature in Xcelsius . In latest service pack 4( SP4 ) also this feature is not there.
    @Sri

  • Product key for SAP Crystal Presentation Design (Xcelsius) won't work

    Hi There,
    I downloaded the free copy of  SAP Crystal Presentation Design (Xcelsius), but the Product Key in the e-mail confiming registration won't work.
    Does anyone know if there is a "tech support" for this?
    Message; "The Key code you entered is not valid. Try again"
    Thanks,
    John Hawk

    The "Contact Us" in Service Market Place  works slowly but well.
    John Hawk

  • Embeddable Crystal Reports Designer Control and Visual FoxPro

    Post Author: PaulBtci
    CA Forum: Other
    Hello everyone, I have a problem adding CRXI Embeddable Crystal Reports Designer Control in the run-time. When the following line is being executed, an "Insert Object" dialog pops up. ThisForm.AddObject( "oleDesigner", "olecontrol", "CrystalReports.EmbeddableCrystalReportsDesignerCtrl" ) The control, however, is available in the list, and when selected is added to the form. The above problem does not exist when I add ActiveX ReportViewer. Can anyone help me with this issue? Any help is greatly appreciated. Thanks, Paul

    Good morning,
    I am using  "Embeddable Crystal Reports Designer Control"  Crystal Report 11 with Visual Basic 6.0.
    There is some way for disable the tab "preview the main report"? THis is including in "Embeddable Crystal Reports Designer Control"
    or
    There is some way for update the tab "preview the main report" loaded after other report? Because, the preview is not refresh.
    Thanks
    Buenos días,
    Les comento, estoy utilizando el control "Embeddable Crystal Reports Designer Control" (CRDesignerCtrl11_5) del Crystal Report 11 en un proyecto de Visual Basic 6.0
    Cuando cargo un reporte dos veces, se presenta la "vista previa de informe principal".  Sin embargo cuando vuelvo a cargar otro reporte no se actualiza la "vista previa de informe principal" sino que se queda con la información cargada anteriormente.
    Quisiera saber si existe una forma de acceder al control para actualizar la "vista previa de informe principal", ya que a pesar de dar clic derecho y elegir actualizar no toma los datos del nuevo reporte cargado.
    Y si es posible en todo caso desabilitar la "vista previa de informe principal" o hacerlo invisible para que únicamente se presente la pestaña de "Informe Principal".
    De antemano agradezco su ayuda.

  • In need of assistance using checkbox and conditional formats

    Hello,
    I'm trying to set up a command to meet the following:
    When I opt to use a checkbox format in say cell "G2" - I would like to setup a conditional format along the lines of...
    =IF G2 is TRUE (i.e. checked), then change the color of cell "A2" to some color.
    Can anyone help me with the line command for this?

    L.
    Seems like it should be easy, doesn't it? There are options to doing this, but none are exactly obvious. The problem for you is that conditional formatting is based on the content of the cell being formatted, not some other cell. A typical use is to, say, bold content over a certain limit, or make the display of a zero value invisible.
    In Numbers08, you have only a couple of options:
    Use an IF-test to alter your content, or use an overlay table or tables. The solution you pick will depend on whether the content was calculated or input directly. If the content was input from the keyboard, that's the most difficult situation since there is no equation to modify.
    So, do you want to change the color of the Text, or the Fill, of cell A2? And, how important is this formatting to you? If it involves extra columns or tables and a lot of fussing around, do you still think you need it?
    Jerry

  • IDisk and conditional formatting

    I've been using conditional formatting to add color to cells for specific events. It's great and allows me to assess data at a glance. Recently, I decided it would be nice to have this data available to me on my iPhone, through iDisk. However, when I copy the file over, open it up on the iPhone, no conditional formatting is apparent.
    Is this just a no-go?
    I realize I can do 1 of two things to fix it: 1) apply the color manually (not a valid choice, really) or 2) save it as a PDF, which retains the color.
    Why I would like to keep it in Numbers is because I really like the tabs for different pages at the top on the iPhone screen. Loading the file as a PDF it seems rather laggy, since it loads all the pages on the same screen.
    Thanks in advance.

    Hi,
    you may use guided navigation to drill to a custom request.
    In the request which has the time level prior to day in time hierarchy, click on 'add navigation' button and select the request which has the day level.
    Build a request with day and sales columns. Edit the formula for sales measure and put for example: case when day = 'monday' then null else sales end.
    Regards,
    Monica Bocchio

  • EVDRE and Conditional Formating

    Hello guys,
    Here is a strange one. We have built an EVDRE for 5 products over 12 months which expands to Column BS
    We find that if we exand it for 2 months the conditional formatting expands correctly but for 12 months the conditional formatting just not expand and just stays in the primary expansion cell. The conditional formatting is blank elsewhere.
    Any ideas?? Help much appreciated.
    We are on Version 7.0 SP4 for MS and using SQL 2008.
    Edited by: GFS on May 4, 2010 3:44 PM

    I don't know any issue regarding EVDRE + conditional formating for Excel 2007.
    Any way I suggets to open a ticket into support because they will do a search for similar problems.
    Usually these kind of issue are related to Excel not really to BPC.
    The Excel 2007 is treating the events into other order than Excel 2003.
    If you are using Custom Macro into your report I suggest to review these Macros.
    Kind Regards
    Sorin Radulescu

  • Can be use SAP Crystal Presentation Design 2011 in Windows 8 and Microsoft Office 2013?

    I had problems in converting a design to a presentation in Power Point, but I have no problems in Word and PDF, why?

    Hi Marco,
    Please repost to the BI Dashboards space.
    -Abhilash

  • Hierarchies and conditional formatting

    Hi all
    I have a specific requirement that, based on a values of one column (let's assume 'day'), the fact data based on another column (let's assume, fact is the sales, and dim hierarcy is time), shall be displayed or not.
    Being more clear, an example: if the day is monday for a specific row, starting from year in the report, clicking to drill to the day (minimum level), the fact (sales) shall not be displayed (or displayed as null), however, if the day is something else for the row, the fact should be displayed. This behaviour is required only at the minimum level of hierarchy, all other levels should sum up all records and show the fact (month and year levels).
    I am not sure whether I can express myself clearly, I need help to solve this.
    Thanks a lot!

    Hi,
    you may use guided navigation to drill to a custom request.
    In the request which has the time level prior to day in time hierarchy, click on 'add navigation' button and select the request which has the day level.
    Build a request with day and sales columns. Edit the formula for sales measure and put for example: case when day = 'monday' then null else sales end.
    Regards,
    Monica Bocchio

Maybe you are looking for