Crystal Report 2008 Charting!

Hi,
I am using Crystal Report 2008 with VS2005. How to normalize the data ? for ex.
I have range of Values 7000 to 9000 for Parameter 1, Values 3000 to 45000 Parameter 2 and Values 30 to 150 Parameter 3
when I plot the graw it showing single line only, I want to see the variation for alll three parameters. Anyones help is appreciated !!
Thanks
Ramki

I have a couple of suggestions- either there is a registry entry or configuration file that I can modify to point the temp file location to a drive/folder of my choice;   or the Report Document Close() / Dispose() methods should get rid of them.  Neither works right now.  Any thoughts folks ?

Similar Messages

  • Crystal Reports 2008 Charting Component

    When attempting to create a new report using the bar chart type, I receive the following error from the report wizard:
    Crystal Reports Charting Component sscsdk80.dll could not be found
    Please re-run the installation to fix this problem.
    I have re-run the installation, selecting additional features of custom charting, and mapping and it did not solve the problem. I have tried to manually register sscsdk80.dll with regsvr32 and that fails:
    Load Library Failed. The specified module could not be found. Which must refer to a dependency (?) of that .dll since sscsdk80.dll is obviously present.
    I have tried copying sscsdk80.dll to the windows\system32 directory and manually registering with regsvr32 and that fails as well.
    Any help would be appreciated. Trying to avoid un-installing and re-installing the entire Crystal Reports 2008 application.

    We had 2 users with this error this week, both on CR2008 SP2.
    The file is located here, assuming BO/Crystal is installed to the default location: C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86
    I copied the .dll file to this location: C:\Program Files\Business Objects\common\4.0\bin
    That stopped the error coming up and the graphs are displaying correctly. Had a similar error with the keydecoder.dll which I resolved by doing the above. Re-installing SP2 fixed the keydecoder.dll error for a while but then it started re-occuring and I tried the above fix, and the error hasn't come back.
    We're on XP SP3.

  • Help Needed in Crystal Reports 2008 Charting - XY Scatter

    Hi,
    I need to create a XY Scatter plot using CRYSTAL 2008.i have to create 7 graphs of same XY Scatter plots in one single report.the 7 graphs i said because i have a Cost category object which will have 7 categories.so for each category i have to show one XY Scatter plot.
    However the data only changes between  each category. i have to use the same objects for all the 7 plotters.
    there will be a 1 dimension object and two measure objects in this.
    So how to develop the report for this requirement?
    Urgent help is needed.
    Regards,
    Kishore. .
    Edited by: NandaKishore A.V on Feb 23, 2012 8:30 AM

    hi Kishore,
    if you Insert another Group on Category, and then move your chart into the Category Group Header, does that solve the issue?
    jamie

  • Crystal Report 2008 Area Chart Data Label Problem

    Stacked Area Chart (Layer Cake) Issues:
    We would like to use a Crystal Report (2008) Stacked Area Layer Cake chart to show the workload RPD's (Sum of Resources Per Day = Y value axis) and Data_Date of the study (M,Month of study date = X value axis, using fiscal year type cycle Oct - Sept).
    Each Stacked Area represents the workload RPD's for a single project, or group of projects.
    When showing labels or series information the chart becomes overloaded and not visible to read because there is over 400 data points.
    Is there a way to break this dataset down so that values and/or labels are visible, using the crystal report options available? To suppress multiple layers and show a single label per layer?
    We tried using the Color Highlight to group and display them by group and condition. The labels and series data points are still over crowded.
    We also need to overlay the chart with the Average FC Totals from an additional Crosstab report.  Is there a way to overlay this over the 1st layer of the report?

    Stacked Area Chart (Layer Cake) Issues:
    We would like to use a Crystal Report (2008) Stacked Area Layer Cake chart to show the workload RPD's (Sum of Resources Per Day = Y value axis) and Data_Date of the study (M,Month of study date = X value axis, using fiscal year type cycle Oct - Sept).
    Each Stacked Area represents the workload RPD's for a single project, or group of projects.
    When showing labels or series information the chart becomes overloaded and not visible to read because there is over 400 data points.
    Is there a way to break this dataset down so that values and/or labels are visible, using the crystal report options available? To suppress multiple layers and show a single label per layer?
    We tried using the Color Highlight to group and display them by group and condition. The labels and series data points are still over crowded.
    We also need to overlay the chart with the Average FC Totals from an additional Crosstab report.  Is there a way to overlay this over the 1st layer of the report?

  • Font style issue with exporting report in Crystal Reports 2008

    Hi,
    I got stuck on the below issue for a while. Please can anyone help on this?
    When I designed and executed a report in Crystal Reports 2008 on my local PC, the font style and size used in charts were exactly what I was expecting.
    However, after I exported the report to our BusinessObjects CMC and displayed it in InfoView, the font style and size in charts looked quite different from what they were in CrystalReports.
    Any ideas of how to fix this issue?
    Thanks!
    BAI

    Hi Nanda Kishore,
    This is because you do not have proper rights on Business View Manager.  Whenever you create a dynamic parameter in crystal and try to save the report on BO, it creates a Business view automatically.  Now in your case, it is unable to create a business view due to insufficient rights.
    Go in Business View Manager u2013 Repository exploreru2014You will find Dynamic Cascading Prompts folderu2014Right click on that and go in rights and add your user information and give full rights.
    Also make sure that your BO and CR designer on same version and patch level.
    Thanks,
    Sastry

  • Crystal Reports Pie Chart showing Sum 100% in Legend.  How to remove?

    I have a Pie chart which displays correctly but in the Legend is displayed the values with the correct percentages AND  the Sum showing 100%.
    I need to either remove the Sum line or be able to change the text from the report since I have to produce the report in 4 languages and the Sum always shows up in the language of the server.
    the legend looks something like;
    value1  25%
    value2  25%
    value3  75%
    Sum     100%   <------  this line must go or be changed  (e.g. in Italian as Totale)
    Running a server for each language is not an option
    There are a variable number of values so I cannot overlay a rectangle on a fixed position.  (awfull solution)
    Is there any way I can simply turn off the Summ (not the whole legend which is needed)?
    any help would be greatly appreciated.
    I am using Crystal Reports 2008
    Best Regards
    Chris Ryder

    Well  Thank you everyone for your suggestions.
    The client is very specific about the look and feel so I cannot change to not using a legend.  However,  the discussions serves to confirm that it is NOT possible which is actually just as useful.
    In Conclusion
    To restate the problem  the client has a report which can be displayed in one of four languages by choice from the end user.  The report contains a pie chart which displays the various segment names and percentages as a legend.  At the bottom of this legend appears automaticaly the word Summ in the langauge of the the 'Server Locale' (in our case german Summe) and the 100% value.
    I wished to know if it was possible to either change the language of this word (without changing the server as I do not have access) or to remove it altogether.
    The answer is NO it is not possible to remove only this word or to change it in anyway.
    Our final workaround is;
    we hide the Legend on the graph and build it as a seperate entity next to the graph.  Not ideal as everything is then done twice and we have an indirect link between the segment colours and the legend colours which is not apparent directly in the report.  But at least the client has signed off on the report.
    once again thank you for taking the time to think about the problem.
    Chris Ryder

  • Error exporting to PDF from Crystal Reports 2008

    Hi,
    We are getting following error while exporting Crystal report to the PDF and preview in IE:
    Description: Failed to export to a pdf file -- Selected exporter does not support one of the features used in this report. MyReport {DCA37817-1414-45A7-8DF9-75503B8CD0FE}.rpt
    This report having chart object as subreport, however export to Excel works fine and we could see chart fine in Excel. Any other reports without charts are exporting fine to the PDF format only this one having issue.
    Report developed with Crystal Reports 2008/SP2, server we are running this report having CRRuntime_12_0.msm merge file installed successfully. We can't install 12_2 or 12_3 downloaded from your site because of errors we are getting while setup with these merge files somehow.
    Server configuration: Windows 2008 RC2 64bit, .NET framework 3.5, project executing report compiled as x86 ASP.NET project.
    Thanks for help!
    Leonid Shprekher
    Bessemer Trust

    Actually, the question boils down to; does the framework support the fonts?
    I believe that my question re. this working in the designer was valid. The designer does not use the framework, so if it works there, it is either a framework issue or a runtime print engine issue.
    I believe if you use the code below, it will list fonts available to the framework:
    foreach(FontFamily ff in FontFamily.Families)
    System.Diagnostics.Debug.WriteLine(ff.Name);
    For more information see kbase [1198306 - Crystal Report displaying incorrect font in Microsoft Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393338333333303336%7D.do]
    Ludek

  • Using Crystal Reports 2008 standalone to edit CR basic reports?

    Can I use a stand-alone Crystal Reports 2008 to edit reports created with Crystal reports Basic for Visual Studio 2008?
    On this project I am working with other developers who don't want to install the full CR 2008 and I really need to to use full CR 2008 to be able to edit a few things in reports I can't do with CR basic in Visual Studio (like changing colors for bars in charts which you can't edit in VS).
    I also don't want to use the CR 2008 runtime for running the application, just the runtime which comes with VS 2008.
    Is it safe to edit a report in CR 2008 and then use it within Visual Studio (assuming I don't add any CR 2008 specific functions)?
    I made a test and installed CR 2008 but without installing the .NET options (however only 1.1 and 2.0 was listed I guess I need to install SP0 to get VS 2008 support anyway). I could change colors for bars etc and save it and open it again in VS 2008. VS complained about
    The full CR designer is also much better to work with so if I can use full CR 2008 without affecting my VS application that would be nice (I guess installing the .NET components would force the use of CR 2008 runtime assemblies).
    Also another question:
    When you use datasets as datasource and use the preview in VS it will use some fake data. But in CR 2008 stand-alone you don't get any data at all. Is there a way to do the same with full CR?

    Hi Magnus,
    You can use CR 2008 to edit reports but there are warnings. .NET version of CR is 10.5, based on the CR version 10 functionality. CR 2008 has much more functionality so as long as you don't add any features of CR 2008 to the reports then it should work. But it is recommended that you use the same version for functionality and 100% compatability.
    Yes you do need SP0 installed.
    You should also upgrade to CR 2008 Developer then you can use the full SDK functionality within .NET and be able to support all the latest OS platforms.
    Please post a separate question for your database question. Use one posting for each question, if not the posts tend to get messy.
    Thank you
    Don

  • Crystal Reports 2008 parameter panel

    Hello,
    I'm using Crystal Reports 2008 stand-alone application to design reports. I'm wondering is there a possibility to change information display on parameter panel?
    The problem is that I've created a parameter with option "prompt with description only" set to true. This parameter has value and description. When it's prompting for parameter everything goes fine, it prompts with description only, but in parameter panel it's only values (not descriptions) displayed. This is confusing for report users as the value is key (int type) and description is name (string that actually says something to user).
    Maybe there is something to be set in Crystal Reports Viewer component properties?
    Thanks in advance.

    Hello Gemi,
    I recommend to post this query to the [Crystal Reports Design|SAP Crystal Reports; forum.
    This forum is dedicated to topics related to the creation and design of Crystal Report documents. This includes topics such as database connectivity, parameters and parameter prompting, report formulas, record selection formulas, charting, sorting, grouping, totaling, printing, and exporting but also installation and registering.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all Crystal Reports Design queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Customize Legend in Crystal report 2008

    How do I customize the Legend in crystal report 2008. I want to change the legend text in print preview mode but I am not able to open the chart in preview mode as it is asking for a XML path but I am not using any XML file . Is there any other way to change the legend text ?
    Thanks in advance
    Sakshi

    Not clear what you are doing? Is this an application you wrote?
    Legend text is what you defined in the Group.
    Change the Group header then you have your change.
    Thank you
    Don

  • Crystal Report 2008 SP3 and BO XI 3.1 conflict

    Hi every body,
    We have a BOE system:
    BO XI 3.1
    Oracle db 10g
    All running successful and can create some types of WebI report.
    But we also want reports with Crystal Report.
    1> So we install Crystal Report 2008 SP3 (without knowing the conflict error between BO XI 3.1 and Crystal Report 2008 SP3 and overwrite some .dll file). After installing, we can not create WebI report any more. And a error message box display: "DBDriver failed to load: C:\Program File\Business Objects\BusinessObjects ENterprise12.0\win32_x86\dataAccess\connectionServer\dbd_oci.dll ".
    2> We uninstall Crystal Report SP3. But this is not the solution. Still error because of missing .dll files.
    3> We open BO XI 3.1 setup and repair BO XI 3.1. Even we uninstall BO XI 3.1, delete all of its components and delete in regedit key. We install BO XI 3.1 again. Now we have full .dll file, not missing them any more. But when we open universe and click on Table browser, cannot fetching any tables.
    We set rights for Oracle DB user again. But still error: cannot fetching.
    4> We searched the solution for this problem on the internet. But not worked, no answer.
    Can somebody help me bring back the BOE system state again ? pls   :"<
    T______T

    Hi Paul,
    I hope I read your question right!
    Yes, It is possible to run XIR2 and 3.1 on the same server although it's not recommended by BO. You will need to make sure they are both pointing to different CMS databases and different FRS repositories, like you already mentioned you will need to specify different ports for the CMS db and Tomcat.
    Why not uninstall Business Objects XI R2 in your BO development environment or a spare server (if you have one), and do a clean install of XI 3.1 SP3.
    Tip: If you were already having performance issues with your XI R2 environment, I would seriously consider upgrading the hardware. XI 3.1 needs a bit more RAM and CPU than XI R2
    Regards
    Rim Geurts

  • Error while dynamically setting logo image in Crystal Report 2008

    Hi,
    We have embedded Crystal Report 2008 JRC in our web application which is an Enterprise Archive (EAR) deployed on WebSphere Application Server.
    The RPT files bundulled in the archive displays a logo which is dynamicalli picked up by the RPT files from a configured location. Due to this the Report generation crashes when travesed to the sub reports/ groups within RPT. We have observed that this problem never occures if the logo is hard coded within the RPT files.
    The report crashing causes another big problem, it crashes the Applciation Server too. This is major concern to us and we need a resolution to this problem.
    Thanks in advance
    Alok Potdar

    FULL Stack Trace is as follows. We have not pasted in our earlier post...............
    3XMTHREADINFO      "WebContainer : 4" (TID:0x16AAE100, sys_thread_t:0x14B1F114, state:R, native ID:0x000015F4) prio=5
    4XESTACKTRACE          at sun/awt/color/CMM.cmmLoadProfile(Native Method)
    4XESTACKTRACE          at java/awt/color/ICC_Profile.getInstance(ICC_Profile.java:784)
    4XESTACKTRACE          at com/sun/imageio/plugins/jpeg/JPEGImageReader.setImageData(JPEGImageReader.java:630)
    4XESTACKTRACE          at com/sun/imageio/plugins/jpeg/JPEGImageReader.readImageHeader(Native Method)
    4XESTACKTRACE          at com/sun/imageio/plugins/jpeg/JPEGImageReader.readNativeHeader(JPEGImageReader.java:588)
    4XESTACKTRACE          at com/sun/imageio/plugins/jpeg/JPEGImageReader.checkTablesOnly(JPEGImageReader.java:343)
    4XESTACKTRACE          at com/sun/imageio/plugins/jpeg/JPEGImageReader.gotoImage(JPEGImageReader.java:465)
    4XESTACKTRACE          at com/sun/imageio/plugins/jpeg/JPEGImageReader.getImageMetadata(JPEGImageReader.java:885)
    4XESTACKTRACE          at com/crystaldecisions/reports/common/image/ImageUtils.a(SourceFile:896)
    4XESTACKTRACE          at com/crystaldecisions/reports/common/image/ImageUtils.if(SourceFile:873)
    4XESTACKTRACE          at com/crystaldecisions/reports/common/JavaImage.do(SourceFile:183)
    4XESTACKTRACE          at com/crystaldecisions/reports/common/CrystalImage.createImage(SourceFile:50)
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/FormattedOleObject.new(SourceFile:101)
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/FormattedOleObject.<init>(SourceFile:71)
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/FormattedReportObject.a(SourceFile:148(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/w.for(SourceFile:105(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/aa.a(SourceFile:64(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ObjectFormatter.a(SourceFile:428(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ObjectFormatter.a(SourceFile:250(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/u.a(SourceFile:887(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/u.e(SourceFile:784(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/u.for(SourceFile:242(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/aa.a(SourceFile:64(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ObjectFormatter.a(SourceFile:243(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ObjectFormatter.a(SourceFile:210(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/v.a(SourceFile:185(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/v.a(SourceFile:230(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.for(SourceFile:359(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.for(SourceFile:133(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ColumnFormatter.for(SourceFile:120(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/aa.a(SourceFile:64(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.a(SourceFile:503(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.a(SourceFile:452(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.a(SourceFile:369(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ah.a(SourceFile:70(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ReportColumnFormatter.a(SourceFile:86(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/paginator/SinglePageFormatter.a(SourceFile:332(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.for(SourceFile:359(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ai.for(SourceFile:133(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/ColumnFormatter.for(SourceFile:120(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/paginator/SinglePageFormatter.for(SourceFile:177)
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/objectformatter/aa.a(SourceFile:64(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/paginator/PageFormatter.do(SourceFile:727)
    4XESTACKTRACE          at com/crystaldecisions/reports/formatter/formatter/paginator/PageFormatter.formatPage(SourceFile:226)
    4XESTACKTRACE          at com/businessobjects/reports/sdk/requesthandler/ReportViewingRequestHandler.byte(SourceFile:219)
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter.do(SourceFile:1909(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter.if(SourceFile:661(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter.a(SourceFile:167(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter$2.a(SourceFile:529(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter$2.call(SourceFile(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/reports/common/ThreadGuard.syncExecute(SourceFile:95(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter.for(SourceFile:525(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter.int(SourceFile:424(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/reports/sdk/JRCCommunicationAdapter.request(SourceFile:352(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/sdk/erom/jrc/a.a(SourceFile:54(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/sdk/erom/jrc/a.execute(SourceFile:67(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/proxy/remoteagent/RemoteAgent$a.execute(SourceFile:716(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/proxy/remoteagent/CommunicationChannel.a(SourceFile:117(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/proxy/remoteagent/RemoteAgent.a(SourceFile:537(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/sdk/occa/report/application/ds.a(SourceFile:186(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/sdk/occa/report/application/ReportSource.a(SourceFile(Compiled Code))
    4XESTACKTRACE          at com/crystaldecisions/sdk/occa/report/application/ReportSource.getPage(SourceFile:767)
    4XESTACKTRACE          at com/crystaldecisions/sdk/occa/report/application/AdvancedReportSource.getPage(SourceFile:324)
    4XESTACKTRACE          at com/crystaldecisions/reports/reportengineinterface/JPEReportSource.getPage(SourceFile:149)
    4XESTACKTRACE          at com/businessobjects/report/web/event/s.a(SourceFile:158)
    4XESTACKTRACE          at com/businessobjects/report/web/event/s.a(SourceFile:127)
    4XESTACKTRACE          at com/businessobjects/report/web/event/bt.a(SourceFile:47)
    4XESTACKTRACE          at com/businessobjects/report/web/event/bw.broadcast(SourceFile:93(Compiled Code))
    4XESTACKTRACE          at com/businessobjects/report/web/event/am.a(SourceFile:53)
    4XESTACKTRACE          at com/businessobjects/report/web/a/t.if(SourceFile:2104)
    4XESTACKTRACE          at com/businessobjects/report/web/e.a(SourceFile:300)
    4XESTACKTRACE          at com/businessobjects/report/web/e.a(SourceFile:202)
    4XESTACKTRACE          at com/businessobjects/report/web/e.a(SourceFile:135)
    4XESTACKTRACE          at com/crystaldecisions/report/web/ServerControl.a(SourceFile:607)
    4XESTACKTRACE          at com/crystaldecisions/report/web/ServerControl.processHttpRequest(SourceFile:342)
    4XESTACKTRACE          at com/ibm/_jsp/_CrystalReportViewer._jspService(_CrystalReportViewer.java:107)
    4XESTACKTRACE          at com/ibm/ws/jsp/runtime/HttpJspBase.service(HttpJspBase.java:87)
    4XESTACKTRACE          at javax/servlet/http/HttpServlet.service(HttpServlet.java:856(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/webcontainer/servlet/ServletWrapper.service(ServletWrapper.java:1143(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/webcontainer/servlet/ServletWrapper.handleRequest(ServletWrapper.java:591(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/wswebcontainer/servlet/ServletWrapper.handleRequest(ServletWrapper.java:481(Compiled Code))
    4XESTACKTRACE          at com/ibm/wsspi/webcontainer/servlet/GenericServletWrapper.handleRequest(GenericServletWrapper.java:122)
    4XESTACKTRACE          at com/ibm/ws/jsp/webcontainerext/AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:226)
    4XESTACKTRACE          at com/ibm/ws/webcontainer/servlet/CacheServletWrapper.handleRequest(CacheServletWrapper.java:90(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/webcontainer/WebContainer.handleRequest(WebContainer.java:748(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/wswebcontainer/WebContainer.handleRequest(WebContainer.java:1466(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/webcontainer/channel/WCChannelLink.ready(WCChannelLink.java:119(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/http/channel/inbound/impl/HttpInboundLink.handleDiscrimination(HttpInboundLink.java:458(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/http/channel/inbound/impl/HttpInboundLink.handleNewInformation(HttpInboundLink.java:387(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/http/channel/inbound/impl/HttpICLReadCallback.complete(HttpICLReadCallback.java:102(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/tcp/channel/impl/AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165(Compiled Code))
    4XESTACKTRACE          at com/ibm/io/async/AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217(Compiled Code))
    4XESTACKTRACE          at com/ibm/io/async/AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:143(Compiled Code))
    4XESTACKTRACE          at com/ibm/io/async/AsyncFuture.completed(AsyncFuture.java:136(Compiled Code))
    4XESTACKTRACE          at com/ibm/io/async/ResultHandler.complete(ResultHandler.java:196(Compiled Code))
    4XESTACKTRACE          at com/ibm/io/async/ResultHandler.runEventProcessingLoop(ResultHandler.java:751(Compiled Code))
    4XESTACKTRACE          at com/ibm/io/async/ResultHandler$2.run(ResultHandler.java:881(Compiled Code))
    4XESTACKTRACE          at com/ibm/ws/util/ThreadPool$Worker.run(ThreadPool.java:1473(Compiled Code))
    NULL          
    1XMTHDINFO     All Thread Details
    NULL           -
    NULL

  • Not able to get the tables in crystal report 2008

    Hi,
    I am using crystal report 2008 and trying to connect MS SQL using OLE DB (ADO) connection. After giving all DB credentials data base tables are not appearing in the connection. how to get the tables for selection in crystal report 2008.
    Regards,
    Sree

    In the CR Designer, select the connection and press the right mouse button. Select Options in the context menu and check if there is an entry in the Table name fiel. Maybe you have a placeholder there that does not match the names of the tables in the database. Just remove it, close the window by pressing OK and refresh the connection browser (press F5). Unfold the connection again and check if you can see the tables now.
    Regards,
    Stratos

  • Exporting Options in Crystal Reports 2008

    I am using Crystal Reports 2008 to make my report for my users.   I am also programming a viewer in vb 2005 so the users can view the report without changing it.  In the viewer I need to be able to export to excel or pdf or any other format.  I want the user to be able to specify where and how to export the report.  However when they press on the export button it is giving a save as dialog box, which, while it gives options to save as excel or pdf, it does not give the options such as to application, or to file, which are there in the full crystal report product. 
    My form gets the report name, sets up the data source and then displays it in a
    CrystalReportViewer object. 
    CrystalViewer.ReportSource = MyReportDocument
            CrystalViewer.DisplayToolbar = True
            CrystalViewer.ShowRefreshButton = False
            CrystalViewer.DisplayStatusBar = True
            CrystalViewer.EnableDrillDown = True
            CrystalViewer.EnableRefresh = False
            CrystalViewer.EnableToolTips = True
            CrystalViewer.ShowExportButton = True
    The export button is there, it just does not give all of the options that I would have expected.  I see there are ways to programatically use the options, however the export dialog box that appears in crystal reports 2008 would be useful to the user here.  Is there a way to make that box show up.  Perhaps it should be and I am doing something wrong.  I am very new to .net and crystal 2008, we used to use crystal 8.0 with vb6 for a viewer.  In that version the export dialog box showed up correctly.  Thank you for your help.  Also, if i am posting this in the wrong forum area please let me know so i can post it where it should be.

    You are doing things the correct way, unfortunately the export dialog is very basic.  If you want this extra functionality, you will have to code it yourself.

  • Two problmes between  Crystal Reports 2008 and Bex Query

    Hi Gurus.
    I have two problems with Crystal Reports 2008 when It obtains data from a Bex Query (SAP MDX query connection).
    1)     I have defined some Parameters Fields using the follow options:
    Type: String
    List of Values: Dynamic
    Value Options Level1:
                         Show on (Viewer) Panel :Editable
                          Prompt text: <text>
                          Sort Order: Ascending by value
                          Prompt With description Only : False
                          Optional Prompt: True
                          Allow multiple values: True
                          Allow discrete values: True
                          Allow range values: False
    When I execute the report with the client of Crystal Reports 2008 (the developer tool), in the initial screen shows a list box where I can select the values from the left box and add it to the left box (as a usually filter). When the number of options (LOV) is more than  the maximum of the system, I have a input box bellow the list box, where I can insert any value (manually) and a button to insert it into the left box. When I publish the Report in the infoview, this filter is modified and the input box where I can introduce manually values is not showed and I can insert only the values showed in the list box, it causes that I can`t select a lot of values that is in the master data of SAP BW, because they arenu2019t listed in the list box.
    There is any option to ability this option in the infoview.
    2)     My Bex query, have a date filter with variable in the restricted key figures, when I execute a Crystal Reports, the infoview (and the Crystal Reports 2008 designer) ask me 2 times the same date, first only the date and second the date and the rest of parameters (introduced in the report of Crystal Reports).
    Why I need insert the date 2 times? How can I modify the Crystal Report for ask me only one time all the parameters?.
    Thanks.

    Hi Abhilash.
    Thank you for your information.
    1) Yes, the parameters are created in the Crystal Reports designer. I have created the parameters in the Crystal Report because I use the same Bex Query to create some Crystal Report, in other case, I will need create some Bex Query.
    2)The Bex query has the date filters and I have created some filters in Crystal Reports designer, the date filter from the Bex query is created automatically in the Crystal Report Designer but I don't use it, I haven't created it anytime. I use my filters only in the record selection. The date filters from the Bex query is showed as Static, and I can`t delete it, if I modify the parameter to dynamic or static with values, at first step ask me again static without values and the second step of the report execution ask me the parameter as I have defined in Crystal Reports Designer, my parameters fields are dynamic. A lot of reports have subreport, but I have created one of them without subreport (to trial) and the Crystal Reports ask me the date filters at first execution, and when I insert the date filters, in the second step, ask me the date filters again and my parameters fields again.
    Thank you again.

Maybe you are looking for