Crystal Report Many to One Query Config error when using DataSet.ReadXML me
When I build a dataset with this method numerous relations are automatically created. I then map these fields onto crystal reports with ADO.net data connection. However when I run the report the following error occurs:
CrystalDecisions.CrystalReports.Engine.InternalException: Cannot determine the queries necessary to get data for this report.Details:
This query cannot be performed. The link order requires many to one query configuration, which is not supported. Please rearrange the links.
If I remove the links (relations) i get duplicate data on the report. Is there any way to resolve this or a patch for the error?
Hello, Mervin;
Since you are using ADO.NET dataset, is it possible to get all of the fields you need in one SQL Query outside of Crystal Reports?
If that is possible, you can use that dataset to create an XML or XSD file to use as the structure for your report.
VB
'Using the full path to the .xml file, include the schema
dataSet.WriteXml("C:\temp\test.xml", XmlWriteMode.WriteSchema)
or
dataSet.WriteXmlSchema("c:\temp\testXML.xsd")
Now create a new report with the ADO.NET(XML) connection and point to either the XML or XSD you created. XML is useful because you can view data in the report designer for final formatting of the report.
Now there is only one datasource and no linking is required in Crystal Reports. That should resolve the one to many issue.
Another useful tool is to group on the many and place all the fields normally in the detail section into that group header. Suppress the Detail and Group footer sections. The Group Header will now look like a Detail section and each distinct value will only appear once. You can group on one field or a combination (using a formula field) to get the results you need. Test this to be sure you do not miss anything you want to see.
Elaine
Similar Messages
-
The report cannot be rendered because of error when using a word template
Hello
When using a report done with a word's template I always get the same error when I try to view as HTML:
String index out of range: -1
The report is validate in word and the HTML preview is done correctly.
Any idea of what can be wrong in the BI server?
Regards and thank you in advance
José TiradoHi Jose
Thats a tough error to diagnose ...
Can you send me your template + XML data
TimdotDexteratOracledotCom -
How to bulid a Crystal report based on Bex query as source
Hi,
I have requirment where the end user wants the query in Crystal.I built a Bex query in Bex query designer.I would like to know how to create crystal report based onthe Bex query.
Thanks,Hi
The Crystal Reports are integrated with BW such that the query built in BW can be used to bulit Crystal Reports on them.
After launching the Crystal Reports, you will have and option : "Open reprt from BW" whcih will help you in opening the BW Queries and create Crystal Reports.
Also in the Menu there is an optin SAP-->Create New Report from a Query
Regards, Hyma
Edited by: Hymavathi Yanamadala on Aug 13, 2009 5:52 AM -
Developing Crystal Report from SAP BEx query
Hi,
I am trying to create an crystal report from SAP BEx query( using MDX driver). I can able to connected to BEx query and got key figures and characterstics, but not able to get calculated key figures into crystal reports.
Would likes to know how to use the calculated key figures used at BEx query level in Crystal Reports? and
Creation of complex parametes in Crystal reports on SAP data.
I really appreciate your quick reply.
Thanks in advance.
VRHi,
calculated keyfigures are shown like any other keyfigure in Crystal Reports.
ingo -
Crystal Reports and Business One Problems
Hello all
Some questions about Crystal Reports and Business One, I try run some Crystal reports developed in special but for some reason when I ussing Terminal Services this unplug, so, more strange its when the user are not administrators because when are adminstrators this problem is not present.
Some tip its welcome.
Thanks a lotHi Ricardo,
I checked the privileges point to point, even as he opened like to administration, but no response as to assign regular users, that is strange.
>I didn't undertstand these statement .What do you mean by point to point .There is only one place you have to specify was user has access to the group you have defined .As described , it is done in number 4 .(Please refer to that )
When we are talking about user -there is two user --One is superuser and regular user
If you are super user , you have to give permission to other users to only crystal report and regular user doesn't need access to Administration module <referring he opened like to administration> .
BTW , Are you familiar with crystal report administration in SAP b1 ? You can find several thread poiting towards training material in the forum
Hope this helps
Bishal
Edited by: Bishal Adhikari on Mar 2, 2009 2:43 PM -
Error when using filter on date column in interactive report
Hi,
I'm getting the following error when using the filter on a date column. None of the criteria in the filter list work. All give me the same error but when I use the filter on a column feature (in the search bar) and use ">" and "<" those work.
Can someone please help me????
" Settledate is in the last 2 years
ORA-30175: invalid type given for an argument ORA-02063: preceding line from MAINDATA "I have a similar problem . I have an interactive report based on resultset stored in a collection; since all the columns of a collection are of string datatype, I convert the columns to appropriate datatypes before its returned to the user; everything works as desired except when I try to filter on a data column , I get a ORA-01858: a non-numeric character was found where a numeric was expected .
I turned on debug mode and am copying the output here , column c009 which is aliased to 'C' is the one that I am trying to apply the filter on
select
ROWID as apxws_row_pk,
"C001",
"C002",
"C003",
"C004",
"C005",
"C006",
"C007",
"C008",
"CHECKOUTTIMESTAMP",
"C010",
"C011",
"TO_NUMBER(C012)",
"TO_NUMBER(C013)",
"TO_NUMBER(C014)",
"C015",
"C016",
"C017",
"TO_NUMBER(C018)",
"C",
count(*) over () as apxws_row_cnt
from (
select * from (
Select c001,c002,c003,c004,c005,c006,c007,c008,to_date(c009,'dd-MON-yy HH24.MI') checkouttimestamp,
cast(to_date(c009,'dd-MON-yy HH24.MI') as timestamp) c,
--TO_TIMESTAMP(c009,'dd-MON-yy HH24.MI') c1 ,
trunc(to_date(c009,'dd-MON-yy HH24.MI')) checkoutdate,
c010,c011,to_number(c012),to_number(c013), to_number(c014),c015,c016,c017,to_number(c018) from apex_collections where collection_name = 'IR_BOOKSALES'
) r
where ("C" between systimestamp - ((1/24) :APXWS_EXPR_1) and systimestamp)*
) r where rownum <= to_number(:APXWS_MAX_ROW_CNT)
order by ROWID
0.04: IR binding: ":APXWS_EXPR_1"="APXWS_EXPR_1" value="1"
0.04: IR binding: ":APXWS_MAX_ROW_CNT"="APXWS_MAX_ROW_CNT" value="2000"
ORA-01858: a non-numeric character was found where a numeric was expected
I have tried to convert c009 to date, timestamp and timestamp with time zone datatypes ; they all return the same error ,but all 3 datatypes work fine with systimestamp when I run them in sqlplus. Any help would be appreciated. -
LabVIEW PDA reports COREDLL.DLL error when using Call Library Function Node
I'm trying to build a LV PDA app that calls an external DLL file built using embedded visual C. When configuring the Call Library Function node I select the stub DLL, configure the I/O parameters and select OK. When the configuration dialog closes I get the following error:
LabVIEW: LabVIEW.exe - Unable to Locate Component
This application has failed to start because COREDLL.DLL was not found. Re-installing the application may fix this problem.
I do not get this error when using the configuration dialog in the example VIs.
Any suggestions as to the cause and/or the solution?
Thanks,
RyanHello -
When you create a PDA VI that calls a DLL, you must include the .c or .lib file that corresponds to the DLL. Take a look at these documents:
LabVIEW PDA Module Build Errors with VIs that Call DLLs
Why Do I Receive Errors When Calling a C++ DLL from a Call Library Node Using the LabVIEW PDA Module...
How To Call External Code in LabVIEW PDA for Palm OS
H
ow To Call External Code in LabVIEW PDA for Pocket PC
Hope this helps!
S Vences
Applications Engineer
National Instruments -
Query Designer crashes when using 0CALWEK
Hi all
I have come accross an error when using the query designer in BI 7.0. If i try to restrict on 0CALWEEK the Query Designer first tells me there are errors but none show, then tells me there are no values for 0CALWEEK and finally crashes saying
"An unhandled exception has occurred in your application."
"Object reference not set to an instance of an object."
After this the desiger freezes and must be exited.
On occasions an RFC error shows on the botton of the design view suggesting a check of the RFC logs, however nothing appears in the RFC log.
Any assistance would be very much appreciated.
With Thanks
GarethAnil
Generating in RSRT does not fix the problem.
Checking the query designer shows no errors, however once we get the crash after attempting to restrict on 0CALWEEK it is not possible to use the check button (since the whole of query designer freezes).
This is happenning on our development system (the only one on which we are currently creating queries) and on all PCs.
The note, unfortunately, refers to an issue when using gui 7.X, however we are using 640 so it should not be a .net framework issue however i am asking my BASIS team to do some testing on that.
Many thanks for your suggestion though.
Any other ideas?
Regards
Gareth -
FSG Error when using segment override
Hi,
I have the following error when using segment override :
General Ledger: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RGRARG module: Financial Statement Generator
+---------------------------------------------------------------------------+
Current system time is 26-APR-2012 11:17:22
+---------------------------------------------------------------------------+
Starting Program RGRARG.
Arguments are:
0 RGRARG - RGRARG
1 username/password - username/password
2 0 - 0
3 Y - Y
4 Data Access Set ID - 1030
5 Chart of Accounts Id - 101
6 ADHOC Prefix - FSG-ADHOC-
7 Industry - C
8 Flex Code Id - GLLE
9 Default Ledger ID -
10 Report ID - 1011
11 Row Set ID - 3461
12 Column Set ID - 1018
13 Period of Interest - SEP-11
14 Unit of Measure ID - IDR
15 Rounding Option - C
16 Override Values - ----DIV3---000000
17 Content Set ID -
18 Row Order ID -
19 Report Display Set ID -
20 Output Option - R
21 Exceptions Flag - N
22 Miniumum Display Level -
23 Effective Date -
24 Parameter Set ID - 1011
25 Maximum Page Length - 58
26 Sub-Request Run ID - -998
27 Application Shortname - SQLGL
Message level is: Normal
rgrini() 26-APR-2012 11:17:22 rgrini.build_per_arr:
Query for period set name from GL_ACCESS_SETS
SELECT period_set_name
FROM GL_ACCESS_SETS
WHERE access_set_id = 1030
rgrini.build_per_arr:
period set name from GL_ACCESS_SETS:
ACCOUNTING
rgrini.build_per_arr:
Query for period names from GL_PERIODS
SELECT period_name,
to_number(to_char(end_date,'YYYYMMDD'))
FROM GL_PERIODS
WHERE period_set_name = :p_value
ORDER BY NLSSORT(period_name,'NLS_SORT=BINARY') ASC
control->report_id = 1011
control->row_set_id = 3461
control->column_set_id = 1018
control->row_order_id = 0
control->content_set_id = 0
control->display_set_id = 0
control->parameter_set_id = 1011
control->resp_lvl = 0
control->round_option = C
control->output_option = R
control->excp = FALSE
control->sub_req_run_id = -998
control->appl_id = 101
control->id_flex_code = GLLE
control->ldg_val_set_id = 1010673
control->ledger_id = 0
control->ledger_name =
control->ledger_currency =
control->access_set_id = 1030
control->security_segnum = 0
control->per_cnt = 162
control->runtime_currency = IDR
control->resp_id = 50386
control->resp_appl_id = 101
control->enforce_security = TRUE
control->sec_rules = NULL
control->reduced_ranges = NULL
control->num_reduced_ranges = 0
control->max_char_width = 1
control->total_num_cols = 0
control->page = NULL
<< rgrini() 26-APR-2012 11:17:22
rgranl() 26-APR-2012 11:17:22Current date and time: Thu Apr 26 11:17:22 2012
rgrgsa() 26-APR-2012 11:17:22
<< rgrgsa() 26-APR-2012 11:17:22
rgrdrs() 26-APR-2012 11:17:22req_id_str =
809694
rgrdpg.rgrdpg: Unable to read value for profile option RG_DEBUG_ON..
rgrprt.rgrprt: Defaulting value for profile option RG_DEBUG_ON to FALSE..
rgrgas() 26-APR-2012 11:17:22 Entering code to get axis set 1018
<< rgrgas() 26-APR-2012 11:17:22
rgrgas() 26-APR-2012 11:17:22 Entering code to get axis set 3461
<< rgrgas() 26-APR-2012 11:17:23
rgrgrp() 26-APR-2012 11:17:23
<< rgrgrp() 26-APR-2012 11:17:23
COA Structure :
Segment: LEDGER_SEGMENT : Ledger
Segment: SEGMENT1 : COMPANY
Segment: SEGMENT2 : ACCOUNT
Segment: SEGMENT3 : PRODUCT
Segment: SEGMENT4 : DIVISION
Segment: SEGMENT5 : DEPOT
Segment: SEGMENT6 : COST CENTER
Segment: SEGMENT7 : FUTURE
Segment value security is enforced for Financial Statement Generator reporting.
rgrrsr() 26-APR-2012 11:17:23
rgrrsf() 26-APR-2012 11:17:23
<< rgrrsf() 26-APR-2012 11:17:23
<< rgrcrl() 26-APR-2012 11:17:23
<< rgrrsr() 26-APR-2012 11:17:23
rgrpsr() 26-APR-2012 11:17:23The COMPANY segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All COMPANY values will be processed.
The ACCOUNT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All ACCOUNT values will be processed.
The PRODUCT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All PRODUCT values will be processed.
The DIVISION segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All DIVISION values will be processed.
The DEPOT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All DEPOT values will be processed.
The COST CENTER segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All COST CENTER values will be processed.
The FUTURE segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set. All FUTURE values will be processed.
<< rgrpsr() 26-APR-2012 11:17:23
rgrdrs.rgrdrs: Getting value for profile option EXPAND_PARENT_VALUE equal No.
PERF0005: Oracle error detected in get_def_ldgs - ORA-01403: no data found
<x get_def_ldgs() 26-APR-2012 11:17:24
<x get_def_ldgs() 26-APR-2012 11:17:24
rgrgax() 26-APR-2012 11:17:24 rgrgax:get_axes
Starting axis query.
rgumsg:
fdnwsc() is used by default
rgrgax.get_conts - Prepare:
ORA-00936: missing expression
Current date and time: Thu Apr 26 11:17:24 2012
Entered sauulc with code 1 from line 3333 of file rg/lib/rgrgax.c.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
0I have followed the following notes but it didn't help me
R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found Common Issues [ID 1368691.1]
Generating a FSG Report Application Does Not Find Profile Values for RG_LOGFILE_DETAIL_LEVEL and EXPAND_PARENT_VALUE [ID 165339.1]
does anyone know how to solved the problem ??
please advise
thxI have followed the following notes but it didn't help me
R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found Common Issues [ID 1368691.1]
Generating a FSG Report Application Does Not Find Profile Values for RG_LOGFILE_DETAIL_LEVEL and EXPAND_PARENT_VALUE [ID 165339.1]
does anyone know how to solved the problem ??If none of the docs help, please log a SR.
Thanks,
Hussein -
Getting Compilation error when used SET or MULTISET operator on nested tabl
Dear All,
I am getting Compilation error when used SET or MULTISET operator on nested tables inside a procedure.
This is working fine in other DB installations of 10g but does not work in another 10g DB.
it says "wrong number of parameter or datatype used in SET"
Can any one suggest what went wrong here?
Thanks in advance.Can any one suggest what went wrong here?Only if you would post the query and Oracle versions on both databases.
Besides, this forum deals with issues in Oracle product installation. So post this query in SQL PL/SQL forum for better response. -
Photoshop CS4 "Program Error" when using Text tool
Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
ThanksThats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
Thanks -
Error when using PPR in the OA page developed.
HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block. -
Getting an error when using adobe photoshop CC, "Could not move the data because of a program error". Any idea on what this means?
Have no idea of what you were even doing in Photoshop my crystal ball is out for repairs so I can not see.
-
Multivalue error when using the previous() function
I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur -
UDESEncrypt Errors when using the JAVA engine (NW IDM 7.0)
Folks,
I'm seeing an error when I use the uDESEncrypt function with the Java Engine in NW IDM SP2 Patch 3.
The error I am getting is:
runFunctionsInString($FUNCTION.encrPWD()$$) got exception
org.mozilla.javascript.EvaluatorException: uDESEncrypt: Key should be exactly 24 bytes long.
The code calling it is:
// Main function: encrPWD
function encrPWD(Par){
//Example calling DSE internal function
//UserFunc.uStop("Terminated by user");
key = "C:\Program Files\SAP\IdM\Workflow\configs\KEY\keys.ini";
OutString = UserFunc.uDESEncrypt(key, Par);
return OutString;
I have also seen this error when using Patch 4.
Interestingly enough, the error does not occur when using the Windows Engine. Anyone else seeing this?
Thanks,
MattHi Matthew,
Try to replace the '\' with '
key = "C:
Program Files
SAP
IdM
Workflow
configs
KEY
keys.ini";
Alternative approaches,
1) setting key empty and it will look into %DSE_HOME%\KEY\key.ini
which should be C:\Program Files\SAP\IdM\Identity Center\Key\key.ini on default installation path.
2) or setting the key to something like = 6D5A2AF59B1CDD7F9592484F178331C891537A3F9B91D362
a 24 byte key...
Also when using DES you should ensure that in Identity Center underneath Options/General
you have encryption algorithm set to 3DES.
Normally if you intend to use this for password provisioning in IC you would also
on the identity store (for instance 'Enterprise people') underneath 'password policy' check
of for 'enable password provisioning.'
By doing so the MX_ENCRYPTED_PASSWORD with be set when operating through
workflow (3DES encryption version of the MX_PASSWORD) which allows you to obtain password
when provisioning to other target systems...
Maybe you are looking for
-
Error message:render error while running sales and reports
r message:render error while running sales and reports. how do you fix it?
-
How do i get itunes to recognize my new iphone
I just purchased iPhone 4. I activated it online using AT&T. However, when I connected to iTunes, it was not recognized. I followed the steps on the troubleshooting page, but none of the steps worked. Has anyone else experienced this? If so, how w
-
People stop hearing me but I can hear them!
Hi, I hope someone can help me with this. I have had my BB for about 8 months and for the last two months for some reason during phone calls people stop being able to hear me. I can hear them perfectly but they can't hear me at all. It is usually af
-
Download error 15. Please help.
I am running a Macbook Pro, Vers 10.7.5 Every time I try to download a CC App, it stops with an error at 42%. Exit code: 15 - 0 fatal error(s), 2 error(s) ERROR: ASU has quit unexpectedly. ERROR: Media DB Error : 18 I have looked at many similar dis
-
PO release strategy - blocking item
Hi SAPers, I've put a PO release strategies on quantities and prices, my problem is that when i have many items in the PO, i don't see which one is blocking !! do someone know about a way to identify easily (for users) the blocking item, or even a wa