CS-MARS Issue - Custom queries/reports are not displaying any data

I am trying to produce a report to identify which clients are TFTPing traffic to a particular host and then quantify the amount of data being transmitted. These statistics should be available via the Netflow data being exported to the CS-MARS System. However, the queries continuely produce nil results.

These release notes are for use with the Cisco Security Monitoring, Analysis, and Response System (CS-MARS), Version 4.1.1 running on either a Local Controller or on a Global Controller.
http://www.cisco.com/en/US/products/ps6241/prod_release_note09186a0080504531.html

Similar Messages

ReportViewer control used with a remote report does not display any data.

Hi there,
I have this .rdl report that runs just fine on our reporting server (I can see that when I try to run the report by accessing its URL in a browser). However, when I run it in my Windows-based application, I do not see any data. My report has two input parameters
and it needs to impersonate the caller's identity because the database uses Windows Authentication.
Here is the code I use:
var reportViewer = new ReportViewer();
// Set Processing Mode
reportViewer.ProcessingMode = ProcessingMode.Remote;
// Set report server and report path
reportViewer.ServerReport.ReportServerUrl = new Uri("http://MySsrsServer/reportserver");
reportViewer.ServerReport.ReportPath = "/Reports/MyReport";
// set the credentials
reportViewer.ServerReport.ReportServerCredentials.ImpersonationUser = WindowsIdentity.GetCurrent();
// create report parameters and set them in the report
var param1 = new ReportParameter("First_Param", "Some string");
var param2 = new ReportParameter("Second_Param", "Some other string");
reportViewer.ServerReport.SetParameters(new ReportParameter[] { param1, param2 });
using (var reportForm = new ReportForm(reportViewer))
reportForm.ShowDialog();
The ReportForm is just a regular Form that has a member of type ReportViewer. In the class' constructor, I assign the member:
public ReportForm(ReportViewer reportViewer)
InitializeComponent();
try
this.reportViewer = reportViewer;
reportViewer.SetDisplayMode(DisplayMode.PrintLayout);
reportViewer.Dock = DockStyle.Fill;
reportViewer.ZoomMode = ZoomMode.Percent;
reportViewer.ZoomPercent = 100;
reportViewer.RefreshReport();
catch (Exception exception)
MessageBox.Show(exception.Message);
Using database level tracing, we were able to confirm that the two Stored Procedures used by the report are called and they return correct and valid records. However, in the form nothing shows up:
Any suggestions?
TIA,
Ed

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

ACS Report - User_Usage_Logon - not returing any data and the report never finishes

Hi,
i'm trying to run the User Usage report, but not getting any data output.
i tried to open the report in the report builder to check the query,, but the query is in XML format and i'm not able to figure out the actual query that pulls out the data.
i need help on the below :
1. way to check , if the ACS database , does actually have any data.
2. to pull out the actual query from the XML data.
thanks,
Sameer

Hi,
As we only have one report experienced this timeout issue. Given this situation, we can try the following steps to narrow down the issue:
1.Run the report directly through SSRS report manager URL to test if we still get this issue.
2.If yes, increase the timeout limitation for this single report.
3.As for further investigation, we can enable SSRS verbose logging by referring to the following steps:
Enabling verbose log in Reporting Services Instance :
To enable the verbose logging for the Reporting Services instance you have to follow below steps.
Go to location
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\bin
Find the ReportingServicesService.exe.config
file, make a copy first, and then open it in editor and change the below configuration.
<system.diagnostics>
    <switches>
      <add name="DefaultTraceSwitch" value="4" />
    </switches>
  </system.diagnostics>
  <RStrace>
    <add name="FileName" value="ReportServerService_" />
    <add name="FileSizeLimitMb" value="32" />
    <add name="KeepFilesForDays" value="14" />
    <add name="Prefix" value="appdomain, tid, time" />
    <add name="TraceListeners" value="file" />
    <add name="TraceFileMode" value="unique" />
    <add name="HttpTraceFileName" value="ReportServerService_HTTP_" />
    <add name="HttpTraceSwitches" value="date,time, clientip,username,serverip,serverport,host,method,uristem,uriquery,protocolstatus,bytesreceived,timetaken,protocolversion,useragent,cookiereceived,cookiesent,referrer"
/>
    <add name="Components" value="all:4,reportrendering:4,http:4" />
  </RStrace>
You have to restart the Reporting Services from Reporting Services configuration manager.
4.After enable the verbose logging, reproduce this issue again by running the report, record the timestamp when we start the report, when the error popped up.
5.Then check SSRS log files at the following path, in the file which contain the issue time, check if there is any error message.
C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\LogFiles
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected].

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

S_ALR_87013611 is not displaying any data for GL

Hi,
THe report S_ALR_87013611 is not displaying any data for GL. How to go about this
Regards
SM

Hi,
S_alr_87013611 is a report where we can see the planned and actual costs in cost elements in cost center wise for a specific controlling are for a given period.
Please check if your GL accounts are assigned with the cost elements in FS00.
If not create them.
You can assing all cost elements to many GL at a time using
OKb2_ Give the range and the cost element for each range eg, expenses range - cost element 1, incomeange _Cost element as 11 etc.
OKb3 _Create the batch input session
SM30_ Run the batch input session created
Also please check if you have given the cost center group costt senter range while you entered the ranges in the selection screen in this report.
Similarly please check the cost elements and cost elements group also.
Thanks,
Shilpa.

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

Some reports are not displayed -- JInitiator 1.3.17 to JRE 1.6.43

We have our Medical Suite developed using Oracle Forms 10gR1(9.0.4) version.As we came to know that JInitiator is no more supported from Oracle and it has many problems Windows 7 64 bit esp.., with IE (9.0) recently we have migrated the Client PC's from JInitiator 1.3.17 to JRE 1.6.43.
Unfortunately when we print the reports, some of the reports are being displayed and the other reports are not being displayed ( No action upon on clicking print button).
But when we revert back to JInitiator all the reports are working fine without any change in IE configuration. So can someone give me the probable cause for this behaviour.
Edited by: Chaitu on Mar 17, 2013 8:57 AM

Chaitu wrote:
If the parameter are written in multiple lines using concatenation then there is no problem, but some places we made the DESTYPE OR CACHE OR DESFORMAT in different lines and it is working fine when we used Jinitiator 1.3.17.
Once we changed to JRE, it stopped working maybe because the command cannot be issued to browser since it is incomplete.
Is 10.1.2.3 a stand alone patchset given by Oracle for migrating 10g R1 to 10g R2 or there are some other patches given before this patchset(10.1.2.3).
I am asking this because most of the times, Oracle releases a patch in sequential order and they should be installed in the same order.
For example In order to install Enterprise Manager 10g Grid Control Release 5 (10.2.0.5), we must have 10.2.0.1.0 (10.2.0.2.0 for Windows) release up and running. So I was not sure whether this patch can be installed alone without any other combinations directly. Please enlighten me if you can.
Hi Chaitu,
patchset(10.1.2.3) is applicable for the following releases only:
Oracle Application Server 10g Release 2 (10.1.2.0.0)
Oracle Application Server 10g Release 2 Standard Edition One (10.1.2.0.1)
Oracle Application Server 10g Release 2 (10.1.2.0.2)
Oracle Application Server Forms and Reports Services (10.1.2.0.2)
Oracle Application Server Portal 10g Release 2 (10.1.4)
Oracle Application Server Portal 10g Release 2 Patch Set 2 (10.1.4.1)
Oracle Developer Suite 10g (10.1.2.0.2)
Oracle Business Intelligence 10g Release 2 (10.1.2)
Oracle Business Intelligence 10g Release 2 (10.1.2.0.2)
Oracle Business Intelligence Tools 10g Release 2 (10.1.2)
Oracle Business Intelligence Tools 10g Release 2 (10.1.2.0.2)
Oracle Business Intelligence Tools 10g (10.1.2.0.2) that shipped as part of Oracle Developer Suite 10g Release 2 (10.1.2)
OracleAS 10g Release 2 Patch Set 1 (10.1.2.1.0)
OracleAS 10g Release 2 Patch Set 2 (10.1.2.2.0)
Hope this helps
Hamid
* batter discuss at {forum:id=82} forum.

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

Appraisal iview is not displaying any data

Hi gurus,
We are using MSS 1.0 ,ECC 6.0 and ep 7 .
We are having some problem with the appraisal iview in MSS general information.The employee has data in the back end but in portal it is showing as no data available.Are there any settings to be made to display the appraisals.
Please it's very urgent.

I am using below code but it doesnot display any data, Please let me know what I am doing wrong
                Dim PLT
As New ADODB.Connection
Dim MyRecSet As New ADODB.Recordset
Set PLT = New ADODB.Connection
                PLT.ConnectionString
= "xyz"
                PLT.Open
Set MyRecSet = New ADODB.Recordset
Set MyRecSet = PLT.Execute("SELECT * FROM Action_item")
If Not MyRecSet Is
Nothing Then
If MyRecSet.State Then
                MyRecSet.Close
End If
End If
             MyRecSet.CursorLocation
= adUseClient
             Set DataGrid1.DataSource
= MyRecSet
             DataGrid1.Refresh
Hi,
Based on the title of this thread and these lines like the following one which is not supported in vb.net.
Set MyRecSet = New ADODB.Recordset
I am afraid that issues related to VB6 are not supported in these forums any more, you could check
Where to post your VB 6 questions
You could consider posting this issue in these forums below:
These forums do not support Visual Basic 6, however there are many third-party support sites that do. If you have a VB6-related question please visit these popular forums:
VB Forums
VB City
Thanks for your understanding.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Some reports are not displayed in Windows Vista and IE9

Hi,
as the title says, I had a problem with Windows Vista.
I'm using CR2008, VS2008, and .NET 3.5 to develop web form.
So, in every computer (WXP, W7) with IE9 works fine, but in Win Vista, some reports are displaying in a wrong way.
You can see a screenshot here
http://dl.dropbox.com/u/27544299/bad%20cr.PNG
SP2 installed.
Any suggestion??
Thanks.

CR 2008 SP2 does not support IE 9.
Upgrade to [CR 2008 SP5.|http://www.sdn.sap.com/irj/boc/support?rid=/webcontent/uuid/10e38d93-7f07-2d10-beae-e739182f8ada]
- Bhushan.

LSO_CHECK_BOOKING custom error messages are not displayed

Hi,
Good day! I am currently experiencing some problems displaying custom error messages from BADI LSO_CHECK_BOOKING. I have implemented this Badi and is appending error messages in CT_MESSAGE_TAB however when the message is displayed in portal, the custom message is not displayed. Instead, SAP displays a predefined error "Error When Creating Prebooking with the data entered..."
Is there a way for me to display my custom error message instead of the predefined SAP message?
Thanks a lot.
Cheers,
James

Hi James,
You have not mentioned, which portal you are using. Please see below, that there are differences in the learning and the admin portal:
Learning Portal:
The framework of the existing design of the Learning Portal does not
allow customer specific error messages to be displayed in the portal.
Only a generic message will be displayed when prebooking in the learning
portal if the BADI LSO_CHECK_BOOKING returns an error. The design of the
application does not expect to raise an exception from the BADI. If the
BADI processing is assumed to be unsuccessful, the messages filled by
the BADI will be ignored and a general error message will be displayed
in the portal.
So this is basically a design limitation.
Administrator Portal:
Have you tried e.g. the following notes?
SAP Note 1806593 Admin Portal: Message is not displayed while prebooking
SAP Note 1575238 LSO: BADI LSO_CHECK_BOOKING does not show warning messages
Regards,
Agnes

Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Thanks
SAP BW

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Report does not display some data

Hi,
Using:
- Crystal Reports 2008 SP3 as development platform.
- Visual Studio 2008 to launch the crystal report.
- SQL Server 2005 SP3 as database
Crystal Report:
- rpt file has been set up for a couple of months, working fine uptill last friday
- dataset comes from a SQL Server stored procedure with some parameters. Executing this stored procedure with these parameters, returns the correct result set
- showing the report using the Crystal Reports Viewer, some fields remain blank since the beginning of this week. Why does the report does not show all the data that is in the result set of the stored procedure ?
Any idea for a solution ?
Any idea to debug such strange behaviour ?
Thanks a lot for any help.

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

Views not displaying any data

Hi,
We are experiencing a strange issue with views in production server.
Views created off of one query is not working where it is displaying "NO Data Available" ,
When the view is executed we fill in the company code and date and leve the remaining 10 selections with out filling, and we are getting "No Applicable data" ,but there is data for that selection.
When we go and try to refresh the variable screen it is filled with date in all selections which are not date fields, and that is causing the problem. " Not sure why the date is filled in all the selections"
Views on different query are working fine.
But the views on same repot are working fine in Development server. But not in Production. We didnt make any changes to that query. We also regenerated the query.We have bounce the java server. We have retransported the query and nothing worked.
We are on SAP BI 7.0 SP 22
Please suggest
Thanks,
Kiran
Edited by: Kumar on Aug 17, 2010 4:04 PM
Edited by: Kumar on Aug 17, 2010 4:13 PM

Amer,
Thank you for your reply, based on your suggestion i have been trying to look for the OSS note untill now there is no success.
I will still look for the note.
Just in case if any one come across this oss note please let me know.
Thanks,
Kiran

CS-MARS Issue - Custom queries/reports are not displaying any data

Similar Messages

Maybe you are looking for