CS3 has suddenly stopped working on my iMac

Uninstalled, reinstalled and same error. What do I do next? Is it compatibility issue with current OS?
iMac 2.7 GHz Intel Core i5, running OS X 10.9.3

Error "Licensing has stopped working" | Mac OS
Mylenium

Similar Messages

Safari has suddenly stopped working on my iMac. I can access it on my iphone and ipad.

Safari has stopped working on my iMac. The error message says: "Safaru quit unexpectedly. Click reopen to open the appication again." When I click reopen, nothing happens.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Wifi has suddenly stopped working. There is an exclamation mark which takes me to network diagnostics. This asks me for network name and password. This is different from the startup wizard which only asked for a WEP key and modem name. What to do?

My wifi has suddenly stopped working on my iMac, after working fine for almost a year. There is an exclamation mark on the wifi bars and when I click it, it takes me to a network diagnostics page. This page asks me for my username and password for the wifi, which I don't have. It is different from the WEP key and modem name, which I originally used to set up my connection. I have not experienced any problems on all my other wifi-enabled devices. Ipod touch, iPad, MacBook all work fine. What should I do?

The name is the name of the network you created on the router. The password is the WEP password. You shouldn't be using WEP at all, as it's insecure and also seems to cause connection failures. Use WPA 2 Personal. If your router doesn't support it, get a new one.

Bluetooth on my iMac has suddenly stopped working! no icon and not in the preferences anymore? tried turning off etc. can anyone help?

Bluetooth on my iMac has suddenly stopped working, no icon top right and unavailable in preferences! Tried turning off etc
Help!! Thanks

Please carefuly read and methodically follow the instructions in Apple's Troubleshooting wireless mouse and keyboard issues located by clicking http://support.apple.com/kb/ts3048

My Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. Any anwers

I receive Adobe updates on a regular basis without any problems. The other day, my Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. I can open all the other function buttons without any problems just not the most important one which is the Editor Function. Has anyone experienced this situation and knows what to do?

Did you tried uninstalling and then installing it again?
Ankush

I just brought my MacPro in for service and they replaced my hard drive. However, now my disc drive has suddenly stopped working! Is there anything I can do to fix this without having to take it back in for service, again!?

The nearest service center is 2 hours from my house and my computer isn't under warranty anymore, so I need alternative options. I'm just frustrated that my disc drive was totally fine until AFTER I took it in for service. I just paid a lot of money for a new hard drive from the apple store and now my disc drive has suddenly stopped working correctly. I tried with multiple CD's and DVD's...loading a disc, but my computer would just make a weird loading noise and then eject the discs. Now it has started fighting taking the disc, so I have stopped trying. Is there anyway to fix this problem without taking it in for service again and paying another boat load of money?
Thanks in advance for your help!

ShelbyMackenzieLynne,
when you say that your disc drive is damaged, do you mean your MacBook Pro’s hard disk drive, or do you mean its SuperDrive (the CD/DVD drive)?
When you’d updated your MacBook Pro to Mavericks, did the installation succeed, and subsequently freeze up? Or did it freeze up during the Mavericks installation?
Which version of OS X was installed on your MacBook Pro before you’d installed Mavericks?
Are you currently able to boot into the Mavericks recovery partition? To see if you can do so, hold down a Command key and the R key while starting up your MacBook Pro.

My 12 year old Canoscan 8800f has suddenly stopped working.

My 12 year old Canoscan 8800f has suddenly stopped working. When I press the power button a light comes on inside, but after a bit of whiring it goes out and the scanner switches off. Is there a solution or should I buy a new scanner?
Solved!
Go to Solution.

I would still get a new one. They aren't too expensive and they have added a lot of features such as LED bulbs and instant on.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 9, Lightroom 6

My edit page in in elements 9 has suddenly stopped working. How can I get it to the workspace?

My edit page in in elements 9 has suddenly stopped working after over a year. How can I get the workspace to open?

You can try Restoring it in iTunes. If that doesn't work you will need to get it serviced.

Adobe Photoshop CS5 extended. The liquify filter has suddenly stopped working. Help!

My liquify filter has suddenly stopped working. Any ideas?

When I open liquify, it opens as usual and I can adjust the size of the image, choose the tool and attempt to edit the image , but it does not respond. Nothing happens.

Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing

Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing happens. Now I have reinstalled windows but still with the same result. I was using the program for several months without problem until yesterday when it suddenly stopped working. Any suggestions on what to do?

same question with PS11

My Photoshop CC and also my CS6 has suddenly stopped working. I'm using Windows 7 - 64 bit.

My Photoshop CC and also my CS6 has suddenly stopped working. I'm using Windows 7 - 64 bit. I need help, does anyone know what to do?

We can't know. You have not told us what exactly the problem is. If there are any warnings, you need to provide them along with other info like the crash logs. If not you have to explain the situation in more detail. Just saying that it doesn't work anymore is not particularly useful.
Mylenium

My end call button has suddenly stopped working

I am using an iPhone 4 16GB Factory Unlocked.
My end call button has suddenly stopped working. The icons at the bottom of the screen are also accessed randomly.
i have tried everything recomended.
Updated to the iOS to the latest version 4.3.5. Did a complete reset of the set. rebooted the set several times. But so far nothing seems to work.
Any help would be highly appreciated.

The Basic Troubleshooting Steps are...
Restart... Reset... Restore from Backup... Restore as New...
If you have tried all these and are still having problems, make an appointment at your nearest Apple Store.
http://www.apple.com/support/iphone/basics/
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

The multipoint-server shell has suddenly stopped working

please help!
hi every time i open the server i am greeted by this message:
the multipoint-server shell has suddenly stopped working.
the details are as follows:
Problem Event Name     :              APPCRASH
                Application Name            :
SRCShell.exe
                Application Version         :               6.1.1600.5
                Application Timestamp :               4eb465b8
                Fault Module Name        :               Station.dll
                Fault Module Version    :               6.1.1600.5
                Fault Module Time Stamp:           4eb465b5
                Exception Code :               c0000005
                Exception Offset              :
0000000000053994
                OS Version                          :
6.1.7601.2.1.0.16.56
                Locale ID
:               13321
                Additional Information 1:             f4fb
                Additional Information 2:             f4fbb3bbd4a03087da47c581553379
                Additional Information 3:             Se3f
                Additional Information 4:
Se3fd17c819664388032530a0fae66b
what should I do? please help!!

Hi,
Please write your notebook product number (p/n), which system are you using and country of purchase.
Resource:
How to Locate the Notebook product number (p/n)
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

IPhoto 5.0.4 has suddenly stopped working. It loads the photo library and then freezes. Rebuilding the library has no effect which has about 3.5MB of data. PowerBook G4 OS 10.5.8

iPhoto 5.0.4 has suddenly stopped working. It loads the photo library and then freezes. Rebuilding the library has no effect which has about 3.5MB of data. PowerBook G4 OS 10.5.8

Create a new account (systempreferences -> accounts or Users & Groups on 10.7) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

My iPad3 has suddenly stopped working, it won't charge up and the screen is blank I have tried to reboot the device by holding the top and home buttons but I don't even get the Apple logo. any advice?

My iPad3 has suddenly stopped working, it won't charge up and the screen is blank I have tried to reboot the device by holding the top and home buttons but I don't even get the Apple logo. any advice?

Plug it into the charger/wall socket and let it charge for at least an hour. It just might start charging. If you have already tried charging it for a fair amount of time and it didn't work, try restoring the device with iTunes.
iOS: Not responding or does not turn on - Apple Support

CS3 has suddenly stopped working on my iMac

Similar Messages

Maybe you are looking for