Laptop screen not getting locked on close lid or resume from suspend

I am using kde 4.4 rc2 atm. My laptop screen is not getting locked when I closed the lid or when laptop resumes from a suspend to ram.
It used to work correctly before I installed acpid(before that I just had the acpi client package installed.) Power Devil used to handle everything correctly.
The power devil settings already says, Lock screen on resume and I have added Lock screen as action for Lid close for performance profile.
Is there any way to fix this. I want to make laptop screen lock when I do lid close or resume from suspend/hibernate.

Suspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
Try a different graphics driver
Tweak the driver module parameters or build your own driver.
Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.

Similar Messages

Desktop visible after resume (from suspend) and before screen is locke

My desktop becomes visible for brief period (<1s) when the system resumes from suspended state. My desktop env. is XFCE4, it happens with both xscreensaver and gnome-screensaver (also with slimlock and i3lock), therefore I think it's not locker dependent. It's a major security flaw because sensitive information may be exposed (not just porn). Using both XFCE provided locking facilities (suspend/resume lock options in Power Manager and Session settings), and systemd suspend/resume hooks yields same result. I remember back then when I was using Gnome, I haven't had this issues. Does anyone have any idea how to prevent this desktop expose?

Have you tried this --> https://wiki.archlinux.org/index.php/Pm … or_suspend ?

I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

dont know what to do

HT201302 I can not get my ipod classic to transfer photos from my ipod to my pc,,,, lost my hard drive and wat to put these pics on new computer how do i do this

I can not get my ipod classic to transfer photos from my ipod to my pc

You need a third-party program like the paid PhoneView or TouchCopy. The free iFunBox may work.
BTW this is the iPod touch forum.

I updated my phone last Wed. and now I am not getting my emails pushed to my phone from yahoo. What's the problem?

I updated my phone last Wed with IOS 6 and now I am not getting my emails pushed to my phone from yahoo. any idea why or how to fix this?

you'll have to set it up as a new phone. You have no choice. If you've been using your phone as recommended, you should have little, if any, data loss.

Resume from suspend - Background & Lock Screen image corruption

I have a Dell Vostro 3700.
The OS is Arch 64 bit. I am using Nvidia-340xx and kernel 3.17.4-1.
When I resume from suspend my lock screen and wallpaper images look like static on a TV.
If the img tag doesnt post the image...here is my imgur link to what it looks like. http://imgur.com/xnftjFC
Thank you.

thiagowfx wrote:Would reloading the wallpaper solve your problem? For example, with feh. If yes, maybe you could reload it automatically every time you exit from suspend.
Reloading the wallpaper actually does do the trick. The feh method will most likely work.
i3lock && systemctl suspend
The i3lock produces the same results. Interesting lock screen btw.
I didn't have this problem until the upgrade when I had to use 'nvidia-340xx' instead off 'nvidia' for my drivers. Obviously that was quite a while ago and since then I have re-installed arch from scratch a few times and each time, it was the same issue.

Resuming from suspend breaks function key on laptop

I have an Asus K40IN laptop. Up until a few days ago, suspending worked perfectly. However, now when I resume from suspend, my function key no longer works. I use it for some global shortcuts like play/pause, volume up/down, brightness up/down, etc. I checked in xev, and it's actually registering no key press at all. However, if I press it twice quickly, it will start registering infinite presses of the d key (keycode 43). This also completely incapacitates the keyboard -- many keys do not do what they should. It stops if I press the actual d key once.
I'm guessing the most likely cause is a recent update. Here's my recent /var/log/pacman.log:
[2010-01-08 14:45] upgraded kernel26-firmware (2.6.32.2-2 -> 2.6.32.3-1)
[2010-01-08 14:45] >>> Updating module dependencies. Please wait ...
[2010-01-08 14:45] >>> MKINITCPIO SETUP
[2010-01-08 14:45] >>> ----------------
[2010-01-08 14:45] >>> If you use LVM2, Encrypted root or software RAID,
[2010-01-08 14:45] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2010-01-08 14:45] >>> More information about mkinitcpio setup can be found here:
[2010-01-08 14:45] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2010-01-08 14:45]
[2010-01-08 14:45] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2010-01-08 14:45] ==> Building image "default"
[2010-01-08 14:45] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2010-01-08 14:45] :: Begin build
[2010-01-08 14:45] :: Parsing hook [base]
[2010-01-08 14:45] :: Parsing hook [udev]
[2010-01-08 14:45] :: Parsing hook [autodetect]
[2010-01-08 14:45] :: Parsing hook [pata]
[2010-01-08 14:45] :: Parsing hook [scsi]
[2010-01-08 14:45] :: Parsing hook [sata]
[2010-01-08 14:45] :: Parsing hook [lvm2]
[2010-01-08 14:45] :: Parsing hook [filesystems]
[2010-01-08 14:45] :: Generating module dependencies
[2010-01-08 14:45] :: Generating image '/boot/kernel26.img'...SUCCESS
[2010-01-08 14:45] ==> SUCCESS
[2010-01-08 14:45] ==> Building image "fallback"
[2010-01-08 14:45] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2010-01-08 14:45] :: Begin build
[2010-01-08 14:45] :: Parsing hook [base]
[2010-01-08 14:45] :: Parsing hook [udev]
[2010-01-08 14:45] :: Parsing hook [pata]
[2010-01-08 14:46] :: Parsing hook [scsi]
[2010-01-08 14:46] :: Parsing hook [sata]
[2010-01-08 14:46] :: Parsing hook [lvm2]
[2010-01-08 14:46] :: Parsing hook [filesystems]
[2010-01-08 14:46] :: Generating module dependencies
[2010-01-08 14:46] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2010-01-08 14:46] ==> SUCCESS
[2010-01-08 14:46] upgraded kernel26 (2.6.32.2-2 -> 2.6.32.3-1)
[2010-01-08 14:46] upgraded zlib (1.2.3.3-3 -> 1.2.3.4-3)
[2010-01-09 03:18] synchronizing package lists
[2010-01-09 03:19] starting full system upgrade
[2010-01-09 03:44] warning: /etc/arno-iptables-firewall/firewall.conf installed as /etc/arno-iptables-firewall/firewall.conf.pacnew
[2010-01-09 03:44] upgraded arno-iptables-firewall (1.9.2g-1 -> 1.9.2h-1)
[2010-01-09 20:46] synchronizing package lists
[2010-01-09 20:47] starting full system upgrade
[2010-01-09 20:47] starting full system upgrade
[2010-01-10 03:06] synchronizing package lists
[2010-01-10 03:06] starting full system upgrade
[2010-01-10 03:08] In order to use the new nvidia module, exit Xserver and unload it manually.
[2010-01-10 03:08] upgraded nvidia (190.53-1 -> 190.53-3)
[2010-01-10 03:32] synchronizing package lists
[2010-01-10 03:32] starting full system upgrade
[2010-01-10 03:32] upgraded nvidia (190.53-3 -> 190.53-3)
[2010-01-10 16:05] synchronizing package lists
[2010-01-10 16:06] starting full system upgrade
[2010-01-10 22:50] synchronizing package lists
[2010-01-10 22:50] starting full system upgrade
[2010-01-10 22:50] starting full system upgrade
[2010-01-10 22:50] upgraded freeglut (2.4.0-4 -> 2.6.0-1)
[2010-01-10 22:51] upgraded kid3 (1.2-1 -> 1.3-1)
[2010-01-10 23:16] upgraded x264-git (20100107-1 -> 20100110-1)
[2010-01-10 23:20] upgraded ffmpeg-svn (21082-1 -> 21132-1)
[2010-01-10 23:27] upgraded mplayer-mt-git (20100107-1 -> 20100110-1)
[2010-01-10 23:39] upgraded amarok-git (20100107-1 -> 20100110-1)
[2010-01-10 23:39] upgraded depot_tools-svn (35767-1 -> 35900-1)
[2010-01-11 00:25] upgraded chromium-svn (35770-1 -> 35902-1)
[2010-01-11 02:19] installed speedcrunch (0.10.1-1)
[2010-01-11 06:01] synchronizing package lists
[2010-01-11 06:01] starting full system upgrade
[2010-01-11 15:12] synchronizing package lists
[2010-01-11 15:13] starting full system upgrade
[2010-01-11 15:14] upgraded x264-git (20100110-1 -> 20100111-1)
[2010-01-11 15:16] upgraded ffmpeg-svn (21132-1 -> 21152-1)
[2010-01-11 15:19] upgraded mplayer-mt-git (20100110-1 -> 20100111-1)
[2010-01-11 17:04] synchronizing package lists
[2010-01-11 17:04] starting full system upgrade
[2010-01-11 17:04] starting full system upgrade
[2010-01-11 17:04] upgraded qtcurve-gtk2 (1.0.0-1 -> 1.0.1-1)
[2010-01-12 15:32] synchronizing package lists
[2010-01-12 15:33] starting full system upgrade
[2010-01-12 15:33] starting full system upgrade
[2010-01-12 15:34] upgraded dhcpcd (5.1.3-1 -> 5.1.4-1)
[2010-01-12 15:34] upgraded live-media (2009.09.28-2 -> 2010.01.11-1)
[2010-01-12 15:34] upgraded strigi (0.7.0-1 -> 0.7.1-1)
Any ideas?

Well I still haven't been able to fix it, but here's what I've figured out:
- Some of the buttons (for example brightness adjust and turn screen off) do not have keycodes. They seem to work directly through the bios, not through the operating system. Other buttons (like volume control) do have keycodes, and do work through the OS.
- If I unload the kernel module asus_laptop, the OS-dependent buttons stop working, but the others continue to work.
- When I suspend and resume, all the buttons stop working.
- Putting asus_laptop in SUSPEND_MODULES for pm-utils does not help.
- Using s2ram from uswsusp does not help.
- After a suspend and resume (so the buttons are all broken), when I press a button twice and start getting infinite presses of d, I get the following message in dmesg:
Jan 17 10:45:53 firefly kernel: atkbd.c: Unknown key released (translated set 2, code 0xe1 on isa0060/serio0).
Jan 17 10:45:53 firefly kernel: atkbd.c: Use 'setkeycodes e061 <keycode>' to make it known.
I tried running the suggested command using a keycode for a volume button, but it didn't help. It did stop this message from coming up in dmesg for that particular button, but the other behaviors were the same.
I can't think of anything else to do to fix it. Does this mean anything to anyone?

Touchpad permanently not working after resuming from suspend

I lost touchpad and trackpoint functionality after resuming from suspend on my ThinkPad E530 (3259CTO).
Even after a complete power off (with the battery removed), the touchpad is detected but doesn't send any event, and the trackpoint is not detected.
In Windows, in the UltraNav control panel, the touchpad is marked as enabled and cannot be disabled, the trackpoint is grayed.
In Linux, I can see the difference is kernel traces when the driver is loaded.
Before : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
Now : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x0/0x0
After looking at https://gerrit.chromium.org/gerrit/#/c/31105/ and Synaptics public documentation, I was able to get more information : the device status register (F01_RMI_Data0) is 0x45, which means the touchpad is in flash programming mode since there is a firmware CRC failure.
It looks like http://code.google.com/p/chromium-os/issues/detail?id=24298, so it's probably not a Lenovo specific problem, but a bug in Synaptics firmware.
Can Lenovo provide the firmware to flash like http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X220-Touchpad-jumpy-response-when-used-with-90... which would hopefully make my touchpad working again ?
The original firmware should work, but an updated one would be better, if it avoids losing the touchpad again later.

I don't know why, but this made me think of the episode of the simpsons when home tries to get over 300 pounds so he can work from home. When he tries to dial the phone he hist all the buttons and gets a recording that says "We're sorry, you're fingers are too fat. To obtain a special dialing wand, please mash the keypad now."
BTW, sorry I can't help... but at least I am entertained easily.

Laptop screen not coming back on after closing and reopening lid.

I remember having this issue before but cannot seem to find the documentation that i used to fix this previously.
I have a Dell b120 with an intel 915 igp
When i shut the lid and reopen it, the screen remains blank. If i recall, it was something i had to set in the power management.

Upon upgrading to the 2.6.36 kernel, Lenovo S10-3 would not resume after suspend.
Adding 'intel_idle.max_cstate=0' to the kernel boot options makes it work.
Tried that because of: https://bugs.launchpad.net/bugs/634702
May work for other intel graphics cards as well.

Can't look at laptop screen without getting migraines - any ideas?

Hi all,
I used my last 15 inch macbook pro bought around 2007 for many hours every day without any problems before it recently gave up the ghost. I then purchased the latest 13 inch macbook pro model a couple of weeks ago.
However, it seems I can't look at my new laptop screen for more than about 10 minutes without my eyes feeling a bit odd and blurry and me ultimately getting a migraine and feeling sick, and having to lie down if I spend any longer than say half an hour at the computer. The obvious thing would be that the brightness is too high or low but i get the same result with differing brightness, and i've also tried increasing the zoom so text size is not too small, as obviously this is a smaller laptop than before.and it doesnt seem anywhere as bad with other laptop screens.
I've been to the doctors who don't seem to think there's anything medically wrong with me, has anyone else had similar problems with these macbook screens? did apple use a different technology on the screens recently that affected people?
Many thanks for any advice!!

A small minority of users suffer from severe eyestrain, headaches, and other adverse effects when using MBP screens. Theories vary widely about what is to blame: the LED backlighting (though all MBP screens have been backlit with LEDs since the first MBP models); the glossy screens in many models, including all 13" models; the brightness or dimness setting at which the screens are used, the small size of the type on high-resolution models, etc., etc. Most users have no problem with any of these things and are happy using their MBPs, but for some the screen is really a problem, and no one workaround or remedy seems to work for all of those who are uncomfortably affected.
There is an interminable thread here on this subject (or subjects, since it's possible that more than one thing is at work). You may want to read some of the posts in it for ideas about things to try:
https://discussions.apple.com/thread/1677617?start=0&tstart=0
Be aware that like most very long threads in these forums, this one contains some misinformation, many unsupported opinions and untested theories, some good information and reasonable test data, lots of ideas, a certain amount of useless complaining, a few flames, and lots of "I have the same problem!" posts that don't make it clear exactlly what problem they're taking about. You'll have to use your own good judgment about what to take from it.

Standard screen not getting displayed in a zcopied prg

Hi Freinds,
(In sap4.7 ) I had copied QA32 into a ZQA32 and had added some validation checks before user Chooses Defects Button,,this ZQA32 works till that point fine but when the Defects button is chosen,,it gives a call to Tcode QA11 ,with the initial screen fields filled up,,
in the normal processing of QA32 when QA11 is called,,it is also filled up with some intial values carried from previous Tcode QA32 and after User presses execute button in QA11 intial screen ,further a screen(200) with 3 radio buttons pops up,,
my ZAQ32 is failing at this point though the line of code where the screen is called (call screen 200 ...) is reached with no variations in values of any of the variables in comparison with when it is called from QA 32,
the screen 200 is not getting displayed if i reach QA11 thru ZQA32,,,
Though it is ALSO calling QA11 and hence the program control is tranferred to QA11, but still the screen is not geting displayed,plz tell me where i went wrong??
Thanks in advance

Hi Sri lakshmi ,
You should debug the code starting from call to QA11 and check if will the conditions are met for call of pop up screen.
This will give you an idea, as what is exactly required for this pop up to appear.
Hope this helps you.

Custom fields in Source of Supply screen - not getting saved

Hello Experts,
There is a requirement to create 2 customizing fields on Souce of Supply (SOS) screen of Shopping Cart in SRM7.0 and has to be updated in the Backend system (PR,PO etc).
I have created CUST1 and CUST2 in the standard include - INCL_EEW_PD_PARTNER_CSF (Customer Enhancements to Partner in Doc.) which is being used in the structure /SAPSRM/S_CLL_WD_SUPPLIER (CLL structure for SOS).
But while creating Shopping cart, these customizing fields are not getting saved and not transfered to backend.
NOTE:
1. I refered SAP Note - 672960 , but it has no information abt SOS enhancement.
2. I have enhanced the backed system accordingly to show these 2 customizing fields in PR and PO.
3. Webdynpro component for SOS screen is - /SAPSRM/WDC_DODC_SC_I_SOS, and the structure used is /SAPSRM/S_CLL_WD_SUPPLIER.
Awaiting the correct answer from you all
Thanks and Regards,
Prabhu

Hello All,
I'm facing exact same problem.
Steps followed:
1. Configuration from SPRO
Supplier Relationship Management -> SRM Server -> Cross-Application Basic Settings -> Extension and Field Control -> Configure Customer Fields -> Define Customer fields on item Level -> Append for Customer Fields on Shopping Cart Item
2. Add new fields in Webdynpro: /SAPSRM/WDC_DODC_SC_I_SOS
View:V_DODC_SC_I_VENDOR
Still i'm not able to get proper results.
Please help.
Thanks in advance.
Yogesh

HT1267 i no longer have aphone service with att,so is possible to update my firmware and not get locked

i had the service with atta while ago,however, i never upgraded it to the new software bec ,i still use like i pod,now whenever iwant todownload sth.
it tells you need to update your version of software,however, im scared if ido my i phone would be locked
i guess my question now is it ok to update without fear that my i phone get locked ? thank you

Yes, if it's not officially unlocked by ATT&T. Updating will lock it back to ATT&T.

How can I use CS4 on 2 computers and not get locked out

I have CS4 on 1 computer and plan to install it on a 2nd computer. If I send work from computer 1 to computer 2, can I work on it on computer 2 and then return to computer 1 and work on it? In the past I have had trouble getting locked out when I have tried to work on the same webpage on 2 computers. I use IE 7 & 8, firefox, and HX pro. Note, I would not be working on the 2 computers at the same time.
Adobe help has advised me not to try what I've described above, but isn't this what Contribute should be able to do?
Thanks for your help.

You're welcome. '
WiFI and Bluetooth are automatically trurned off when enabling airplane mode - you have to turn them back on to use them.
WiFi and Blue tooth do NOT involve any carrier roaming charges. You may have to pay for lockal WiFi hotspot, but that has nothing to do with your carrier charges.

Change request save pop up screen not getting

Hi,
After upgrading BW 7.3 sp09, we are trying to save one query to another query name in query designer but we are not getting change request pop up screen to save perticular request and package.
Please provide your input ASAP.
Thanks,
Manjunatha.

Use tcode scc4 and check the following settings ................
Also have a look at this
http://scn.sap.com/community/business-explorer/blog/2013/11/14/how-to-create-bex-transport-request

Laptop screen not getting locked on close lid or resume from suspend

Similar Messages

Maybe you are looking for