CS3 preset settings? Please help

Hi I'm not to sure whats happening, but in CS3 the footage I load, everycouple seconds the pixels will turn red. I think it might be a preset setting
but with CS5 I use the canon preset and it works fine. Here's what it looks like http://screenjel.ly/ACTyILGO5Sg
Thanks
Andrew

Andrew,
Normally, a red Frame indicates a Frame that was dropped during Capture. To maintain sync, PrPro adds a red Frame.
What camera are you doing the Capture from, and how is it hooked to the computer?
If you are NOT doing a Capture, then something else is afoot, and more info would be useful.
Good luck,
Hunt

Similar Messages

  • Im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

    I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI.  I have the most success with the following operations in this order:
    1)  Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
    2)  Plug the mini displayport end of your new super-cable to the computer.
    3)  Plug the HDMI end into your TV.
    4)  Switch inputs on your TV to the proper input.
    5)  If still nothing on the TV, try a different HDMI port on your TV.
    Hopefully this helps!  Good luck.

  • Hey , this is Satvir and my personal hotspot option is missing in my ipad settings please help it's urgent , please tell me what should I do

    my personal hotspot option is missing from the settings  , please help me out
    <Email Edited by Host>

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it.

  • CS3 Installation Problem, please help!

    Hi there ive been trying to install Photoshop CS3 and having great difficulty, it will only install the shared components and nothing else, Ive gone through all the tutorials on the Adobe help pages and still not had any luck, I've tried looking through the log and the only thing I could come across is the following:
    [    5028] Sat Apr 11 00:41:19 2009 ERROR
    Default installation language not valid, falling back to first supported language.
    [    5028] Sat Apr 11 00:41:19 2009 DEBUG
    couldn't find any info on the error code or anything, ive uploaded my installation log here:
    http://www.2shared.com/file/5313464/86af2f33/Adobe_Photoshop_CS3_10.html
    please help! I am using windows Vista but not sure if its 32 or 64

    just tried that and still does not want to work, really just does not want to install for some reason!
    I did try this and it wouldnt let me allow inhertible permissions to the admin on Solution 11 of this: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401401 this part here:
    Select both "Allow inheritable permissions from parent to propagate to this object" and "Reset permissions on all child objects and enable propagation of inheritable permissions," on the Permissions tab.
    Click OK in the "Advanced Security Settings" dialog box. Windows will now reset the permissions for each child object to correspond with its parent.
    If you can't change permissions or rename that key, then contact Microsoft or your hardware vendor for assistance.
    not sure if that has something to do with it?
    appart from that i'm completly out of ideas, very frustrating as i have been trying for days to get this to install! any more suggestions are welcome

  • Standard widescreen sequence settings - PLEASE HELP!

    Hi,
    I've been trying for weeks to figure out the proper sequence settings / easy setup settings for videos that will ulitimately end up as STANDARD 16x9 footage.
    Is there a direct 16 x 9 standard widescreen setting?
    What I've been trying to do is to make a standard widescreen picture video slideshow that will end up being burned via idvd. But for the life of me I cant figure it out?!?!?
    PLEASE HELP! Your assistance will be greatly appreciated!
    Thanks!!!
    PS
    I do have Fianl Cut Studio Pro 2 studio.

    "Standard" 16:9 is anamorphic.
    Import your footage into FCP using a 16:9 preset, edit it and export it using 'current settings'.
    Open up DVD Studio Pro and import the footage making sure to check the box that tells the program the material is 16:9.
    x

  • I cannot access my ipnoe due to i get a notification saying Not Enouhh Storage and i cannot get out of it or go to settings please help what can i do to fix this problem?

    I cannot acces my IPhone due to i get a notification saying that i dont have enough storage and i need to back it up with ICloud but it wont let me click close or settings there for i cannot recieve calls or acces my email or text messages. I even tried turning off the power but it wont let me do anything please help !

    If the iPhone won't Restart you should be able to Reset it. Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    For the future (in case you don't' know), go to Settings > iCloud > Storage & Backup > Manage Storage, and choose your Device under the Backups list.
    Under the Backup Options turn off anything you don't care about (being backed up, that is). This will let you reduce the backup size so that it fits in iCloud again. You can also delete the current backup here.
    You should also check Settings > General > Usage and look at how much data each app is storing. Identify problem apps and go clean out unwanted files.
    Great resource as well http://support.apple.com/kb/HT5262
    Hope this helps!

  • Wont let me into itunes store due to network settings, please help!

    I previously had no problems with the store and have regularly purchased from it. Since going wireless I can no longer get in and now when I try through modem it doesn't work either.
    I have flushed the DNS settings as advised, but, no joy. If anyone has any ideas please help me.

    Try these;
    1 - http://docs.info.apple.com/article.html?artnum=302182
    2 - http://docs.info.apple.com/article.html?artnum=304082
    3 - http://docs.info.apple.com/article.html?artnum=93434
    4 - Check the firewall on your broadband router/modem.

  • Lost CS3 serial number, please help

    I'm behind the times but I have been using CS3 for quite some time and only installed the trial of Creative Cloud a couple of days ago, but for some reason when I try to use CS3, which I'm quite happy with, I no longer have the serial number installed and I can't find my disc for the number. Please help.

    See here:
    Find your serial number quickly

  • Wifi option is greyed out and wont fix after restoring to factory settings--PLEASE HELP!!!

    my wifi option is "greyed out" therefore it doesnt allow me to connect to the internet. Ive restored it to factory settings, its still greyed out. Please, please, please help me out here.

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • Since I got my iPhone 4 when I send mail on my ipad it goes to people's spam files. I must have done something wrong to settings please help.

    Since I got my iPhone 4 2 days ago whenever I send mail from my ipad1 it goes to everyone's spam files please help. I'm sure I did something to the settings I just can't figure out on which device and how to fix it.

    You might need to send your iPhone back in to Apple, go to an apple store, or get a new iPhone unfortunately. I personally would go to an Apple Genius at the Apple Store. They're really good.

  • Blackberry Curve 8330 (Facebook Push Notificati​on Settings) Please Help

    I have a BB Curve 8330. I received a warranty replacment two days ago. I installed the Facebook application and I am not receiving push notifications to the Facebook App on the Blackberry.
    The thing is, I used to receive push notifications to the FB App on my original 8330 Phone. I looked at all my Settings on Facebook.com, And Installed Facebook App for Blackberry.
    Could anyone please help me out? My Friend has a BOLD and he was receiving notifications instantly to his Facebook App on his BB Bold, while I was not. And we even compared settings and they matched, I am getting e-mail notifications to my account so I am receiving the notifications, just not thru the Facebook App on the phone......what gives?
    I did a Hard reset, and reinstalled my Facebook Application to the phone.
    HELP Please!
    I figured it out. The email address associated with my facebook was not setup on the Blackberry. Facebook e-mails my acocunt then that pushes to the Facebook App on the Phone.
    Message Edited by bbuserct on 07-31-2009 10:30 PM

    I'm having the exact same problem!

  • WAP and MMS settings, please help.

    I just bought a new phone after spending years with very basic ones (I have a history of breaking things and don't really trust myself with decent ones yet)Bought one that was locked to tesco, got it unlocked and then found out that 02 don't have the settings for it. Typical.I've looked at a few other forums and nothing has worked so far, it is a samsung C3530. I would really appreciate any suggestions.Btw I am useless with technology, please help!

    Make sure you have opened your browser and found options / settings / advance and set your browser to use your new manually installed settings as the default. You should be able to get most devices running with just the apn, username and password (payandgo.o2.co.uk payandgo password). If you are still having issues, just book an appointment with your local O2 guru, I am sure they will be able to get you up and running. Good luck and hopefully you will be up and running shortly.

  • Display Settings -  please help.

    I've read all the posts on this and nothing has helped so here I go...
    I have a 13 inch Macbook Core 2 with OSX.
    I have a Acer 19"W LCD display attached using a MINI-DVI to VGA Adapter.
    The monitor's native display is 1400x900. I can get only 1400x1050.
    I'd sell my first born just to be able to scream at this thing and say "1400x900!!! I own you!"
    Someone please help me. If I spend another hour on this I'm buying a PC, and fixing the wobble in my kitchen table with my Macbook.
    Thanks.

    The display is supposed to send information about supported resolutions to the computer through the display connector. Not all displays send correct data. SwitchResX or DisplayConfigX will force the computer to the resolution you want, even if it didn't get correct information from the display. Read the instructions carefully, so you don't get the computer stuck at an invalid resolution.

  • Email Settings- PLEASE HELP!!!?

    Hi,
    Could someone please help me?
    I have my bb email linked to my work email and everytime i change my password on my work pc my bb prompts me to update my password which i usually do with no problems, but now i have a problem updating it in the email setup application, an error message comes up that says it is unable to connect to the applications server. What could be the problem here?

    cherrie, Greetings, and welcome to the BlackBerry.com Support Forums.
    Try a simple reboot on your BlackBerry and see if that helps after the reboot to connect.  With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Vdroop settings please help!

    hi, I'm new to the forum.
    I have a problem with the motherboard MSI P67A-GD65 + Core i5 2500K.Posiada VDroop a very large, it makes no difference whether it is high or low, the processor is clocked at 4.7 GHz with 1.39V vCore Bios, in Idle is 1.39V, the load jumps to 1.43V even though the setting is Low VDroop.
    Bios v1.8B6 uploaded the latest on each other is the same.
    No option to offset as in the Asus motherboard, the processor is idle, and gets the same V as in stress.
    Please help to eliminate the phenomenon of large Vdroop
    Yours

    Quote
    Please help to eliminate the phenomenon of large Vdroop
    Since this is a user to user forum, it is requested that you open a ticket with MSI Tech Support detailing your concerns.
    Quote
    the processor is idle, and gets the same V as in stress.
    In the 'upper end' OC speeds, even with power saving features enabled, my Eclipse Plus's & BB Xpwr's do that as well. No resolution as far as I know of, but also worth asking them about that as well.

  • HT4623 I am unable to see the software update link under settings.please help

    I am unable to see the software update link under settings.please help

    Unless you are already using iOS 5, you have to connect to your itunes (on your computer) by cable, and will not have the update option in your iPhone's settings.

Maybe you are looking for