CS4 Define Pattern Acting Weirdly!!! Pleas Help (with screenshot)!!!

I'm try to define a 20x20 pixel pattern for infill to create an old crt monitor effect. But Photoshop won't let me define the whole 20x20 but only allows me a 20x1 strip. (I've selected the whole image) There's also a weird "16" at the corner of the defined pattern. I've never had this issue before. Anybody know what's going on??
Thank you for your help!!!
Working in CS4, CMYK 16bit.

Well, the 16 or 32 flag is how Photoshop tells you that the pattern was defined in 16 or 32 bit/channel.
Is part of your image on different layers that aren't selected?
If you had selected the top half of your image, then you might get a single pixel (because the rest is a replication of the top row, and filling with a pattern would get the same result).

Similar Messages

Help with Screenshot on IOS 7

I need your help with my IPAD 3 and IOS 7 for "ScreenShot" helping please let me know!

Hi notdabod108
Yes, brilliant. Your recipe works well. Thank you.
This solved my problem completely.
Tim

My macbook pro 2011 charging indicator is acting weird. Help please?

A few weeks ago my on screen charging indicator started acting funny. Normally it takes my macbook around 2 hours to charge fully. However, sometimes the indicator says anywhere upwards of 4 hours. Furthermore, sometimes the indicator keeps switching back from the charging symbol to not charging. Why is this happening? Here is my power info:
Battery Information:
Model Information:
Serial Number:          D86122200J4DGDLAE
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          406
Hardware Revision:          2
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          5961
Fully Charged:          No
Charging:          Yes
Full Charge Capacity (mAh):          6430
Health Information:
Cycle Count:          341
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          1382
Voltage (mV):          12534
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          25
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          15
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
PrioritizeNetworkReachabilityOverSleep:          0
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Battery Power:
System Sleep Timer (Minutes):          20
Disk Sleep Timer (Minutes):          0
Display Sleep Timer (Minutes):          15
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
GPUSwitch:          2
Reduce Brightness:          Yes
RestartAfterKernelPanic:          157680000
Standby Delay:          4200
Standby Enabled:          0
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          85
Revision:          0x0000
Family:          0x0085
Serial Number:          0x001f9c6e
Charging:          Yes
How does it look? Could the problem be in the mag safe charger or the computer itself?
Thanks for the help.

Carolyn Samit wrote:
Try Troubleshooting the MagSafe adapter
Thanks for that link. It did provide some diagnostic tools to see if the adapter is the culprit. I don't believe mine is. My situation, MacBook Pro 8,2 - early 2011, 2.3 GHz i7. I'm experiencing, while on the adapter, after the battery charges to 100% a slow drop (while connected to the power adapter) to 98%, 97%, etc. Unplugging the adapter for a bit will again bring it back up to 100% but it again starts to drop. I don't think it's the battery - have good on battery performance (in bare bones boot - a special user with no StartUp items) I can get 5-7 hours. I suspect the power adapter - one glaring issue: I have a CAT who thought it cute to chew on the cable but I couldn't tell if it was superficial or had actually damaged the wires inside past the protective sheath. I suspect this could be the issue and have ordered a new adapter. My wife suggested coating the cable with lemon juice to make it less tempting for the cat to bite on. This isn't the first cable this cat (never caught "red handed") has chose to chew on. My Jawbone charge cable was completely severed. I took measures to make the cables less accessible but the damage had already been done to the Mag Safe Power Adapter. As I said, my monthly "battery exercise" fully charges the battery - it is this mysterious battery percentage drop that has me wondering. I read somewhere that some are blaming Mountain Lion, I'm not so quick to do so until I get the new adapter.
This post may have been better off in a new topic, but since we're talking about the Mag Safe Power Adapter I thought it would be okay here, especially since the link to the KB article gave me ideas on what to look for. The pins in the cable were all up, I presume the middle pin is different and will look different as to its height compared to the two outboard/inboard pins, yes? There was no issue with the laptop end of the connector. I did not switch out the "duck head" with the long cord though. With the cable damage issue I thought I'd wait and see. Now that I think of it I could have borrowed my wife's adapter - same MBP, almost, but should both have the 85w adapter. We'll see...
Tom

Blackberry 8520 pleas help with creating a I.D. !

I can't create a blackberry I.d. Since I gotted my blackberry I've been struggling with it!!!! Help I can't create a blackberry I.D.it keeps on saying email adres exits!
Solved!
Go to Solution.

Hello !
Complete the following to create a BlackBerry ID:
Note: We recommend using an email address that can be accessed through a desktop browser to keep record of the account notification emails.
From a PC, go to www.blackberry.com/blackberryid and click the link to Register for a BBID.
Review the BlackBerry ID Terms and Conditions, then click I Agreeto continue.
Complete the required fields on the BlackBerry ID sign-up page, then click Save.
Note: The Screen Name is a unique display name used to provide a way to identify the BlackBerry user's presence in various BlackBerry products and services without revealing any personal information. (Ex. When writing a review for an application in BlackBerry® App World)
Note: The Username is the BlackBerry ID accounts login name as well as the accounts associated email address.
Note: When creating a BlackBerry ID, the account password can not match either the recovery question or recovery answer.
A confirmation message will be displayed advising that the BlackBerry ID has been created successfully, click OKto continue. This will also send a confirmation email to the email address used for the accounts Username.
As part of the BlackBerry ID creation process an email will be sent asking to validate the email address used as the BlackBerry ID Username. To validate the email address click the link within the email message and when prompted enter the BlackBerry ID password
Note: The link within the validation email will expire after a 24 hour period. Please be sure to click on the validation link before the link expires. If the validation email in step 5 does not arrive in the email inbox please be sure it has not been blocked by a local or Internet Service Provider SPAM or junk filter.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest there time on this Message anymore.
Thanks.

NetBeans acting weird; A list with different components

Hi,
I'm writing an application that is using swing components and have some questions (my IDE is NetBeans 6.1):
1. I have some forms with JTextFields, JButtons and JLabels. I have a very annoying problem in the NetBeans, that sometimes if I change the location of one of the components in the form (in the design view), for example a JTextField, the entire form changes its look - buttons are moving, labels are dissappearing etc.
Why is that? Is it a bug in the IDE?
2. I have written kind of a IM application and I have a list of users, some are online and some are offline.
I want the list to show me the online users in a different way that the offline users (for example - online users are colored in green and offline users are in red, or maybe a small icon next to the user's name).
How can I do it? At the moment I'm using a JList (and don't distinguish visually between offline and online users).
Thanks a lot!

You may get a decent answer here, but odds are that you will have better luck if you post this in some netbeans forum or mail list.
Oh, and I doubt that you've run into a NetBeans bug. The relative probability of you finding something that the creators have not vs you simply not using it correctly are orders of magnitude apart. This is not to insult you, as if I were in a similar situation, the odds would be the same for me. I know that I'm not anywhere near as smart as the creators of this complex app.

Pleas help with my music files and folders on an external drive

A while back, I thought I had a virus on my C drive and was advised to by an external hard drive to move all my important files and folders to. As an inexperienced computer guy, this eventually led to a problem. I have many folders that shouldn't have been moved, main folders that were broken up, duplicates of songs, some song files that are empty, etc. This doesn't just apply to iTunes folders, it includes all the computer's music folders.
Can you please help me reorganize and delete duplicates (C and external drives)? Is there a quick way to search for song files that will not work? Is there a way to wipe out all iTunes files and start over without losing the songs bought via itunes?

Welcome to the Apple Discussions. I think you're in the wrong forum. This is the iDVD forum. If I read your question correctly you probably want the iTunes for Windows forum.
OT

Weird Problem- Help With Logic Loops

Hi all,
I've been using Logic Express 8 for about 2 years and I've got a pretty good handle on things. However I keep having this small little problem and usually restarting the software fixes it, but not this time.
My problem is this: I'm trying to make some beats using software instruments. So I click on "Drums and Percussion" then "Ultrabeat" then choose my drum kit. I start punching in my beats but Logic is playing some Apple Loop on top of it! Theres no notes on the track and yet it still plays this random beat! I can adjust the tempo and the beat adjusts to it.
The problem is there is nothing there. Its a blank track, but this beat keeps playing.
I used to just restart the program when it happened and it usually took care of it, however it won't fix it this time.
I know it's probably some check box I don't have clicked or something but if someone could help me out, I'd be very appreciative.
Thanks,
Josh

Ah yes!
Thank you JG99!!!
I forgot to go into the Ultrabeat menu, and turn off the "example beat" that they give you. I knew it was some checkbox that I didn't unclick or click.
Thank you sir, you are a gentleman and a scholar.

Pleas help with rounding decimal field

I have a totals field that is summing several fields. I wish to have this totals field provide a rounded sum. I've tried setting the trailing digits to 0 but it will not round up, only round down. I have a display pattern for the field of num{($z,zzz,zz9.99)} . Example 162.59 is displaying 162.00 in total field instead of 163.00. Is there something I'm missing or am I missunderstanding how a decimal field works?
code in "calculate" event:
var test=xfa.form.topmostSubform.personnel_page.person_1.salary_cost1.rawValue+
xfa.form.topmostSubform.personnel_page.person_2.salary_cost2.rawValue+
xfa.form.topmostSubform.personnel_page.person_3.salary_cost3.rawValue+
xfa.form.topmostSubform.personnel_page.person_4.salary_cost4.rawValue+
xfa.form.topmostSubform.personnel_page.person_5.salary_cost5.rawValue+
xfa.form.topmostSubform.personnel_page.person_6.salary_cost6.rawValue+
xfa.form.topmostSubform.personnel_page.person_7.salary_cost7.rawValue+
xfa.form.topmostSubform.personnel_page.person_8.salary_cost8.rawValue+
xfa.form.topmostSubform.personnel_page.person_9.salary_cost9.rawValue+
xfa.form.topmostSubform.personnel_page.person_10.salary_cost10.rawValue;
//this rounds the value upon exit of field
var result = MATH.round(test.value);
this.value = result;

In FormCalc you have a function which do just what you are looking for..
Ceil(162.59)
Put it in a messageBox and see the output..
form1.#subform[0].Button1::click - (FormCalc, client)
$host.messageBox(Ceil(162.59));
OR
You can use the Ceil function of the MATH object in Java Script.
form1.#subform[0].Button1::click - (JavaScript, client)
xfa.host.messageBox("" + Math.ceil(162.59));
Thanks
Srini

Help with Spry, acting weird in Mac Os 10.5 10.6, 10.7 and Ios Devices

I use Dreamweaver CS4 for designing our school website. The url is http://www.stpiusxschool.org
The menu bar on the left is built with a Spry Asset, it is to expand to different choices on some of the lines. The issue started about a month ago, if I click on the first item that should expand out (Parent Resources) it will not expand out, then I choose the second one (Student Resources) it expands out, I go back to Parent Resources and it will expand....this happen on Mac 10.5 and Ios Devices (Ipad, and Iphone)
On Mac 10.6 menu bars will never expand out.
I have tried many things, I have ran the Spry Updater and uploaded those files. I have built a page outside of my site, it appears to work ok, then copied that Spry Asset folder into the site, no luck.
I have built a second spry on a test page within the site, and tried it out, it doesn't seem to work correct either. It can be accessed off the main page mentioned above, scroll to the bottom and click on test, that is just what it is a test page.
School is starting soon and this site is used a lot for resources during the day.
I have called Adobe and got no where with them but that even took hours.
If someone could help me out that would be awesome.
By the way, I know nothing about coding itself.
Thanks

You have got two problems
The menu is acting weird in Mac as well as on PC
The menu does not behave in IOS devices
The solutions
Add the DOCTYPE Declaration to your document(s)
Replace the current SpryMenuBar for an IOS friendly MenuBar
1. You can add the HTML5 document type as follows, making sure that there are no blank lines before <!DOCTYPE HTML>
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>St Pius X School des moines iowa</title>
The title already existsin your document. I put it there so that it is easier to see where the rest goes.
2. There is a Spry Menu Bar 2.0 available here http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=2141544
Gramps

Hi ya'll, I'm having problems with patterns. Error 519, what's going on?? URGENT!!! Can't seem to fill layers with user defined patterns

I've never had this problem before, I noticed improvements a few days ago regarding pattern tool but the last few days I've been unable to fill layers with a user defined pattern. This is one of the main reasons I use photoshop and it's giving me a headache!!! I have to turn in some patterns by monday and this is not working, please fix it!!

First a clarification: You are NOT addressing Adobe here in these user forums.
BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Photoshop CS4: Cursors disappear and UI acts weird when fullscreen + UI hidden...

Photoshop CS4 11.0.1
Windows 7 x64
NVIDIA driver 196.21 [GEFORCE GTX 260]
Cursors disappear and UI acts weird when in fullscreen mode with UI hidden [ex: using tab key]. However, it can be brought back to normal by toggling the UI back on. Can this be fixed?

Submit a bug report to Nvidia.

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

I'm going to guess videos buffer for a while also...
Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
To close apps: Double click home button, swipe up to close the apps.
To solve internet problem, contact your provider. Basic internet is not enough for video games and movies. Your router may be old and slow.

HT201441 Thank you for help but I can't remember my Email can I actevate it with out the apple ID pleas help me

Thank you for help but I can't remember my Email can I actevate it with out the apple ID pleas help me

Welcome to the Apple Community.
Sorry but without your previous Apple ID and password you cannot unlock your device.

How can I contact Adobe support to get help with deactivating my cs4 license on a computer that I cannot access anymore?

My mac laptop recently went kaput. So I got a new one and I restored my most recent time machine backup to it. The restore went well, but I am not unable to open my cs4 programs.
When I try, I get a message that says "Licensing for this product has stopped working..." and it gives an error code 150:30
I have tried looking for solutions myself, but nothing that I have seen on the forums has been able to resolve the issue. As far as I can tell, I think that I have to reinstall my master collection and reactivate it, however, in order to do that, I think that I will need to deactivate my old version, that is installed on my dead laptop.
So, I need help with a couple things.
1. I need to get in touch with adobe support in order to get my license deactivated. But the new adobe support system just basically sends me to the forums without providing any way to get in touch with an actually adobe support person directly.
2. I think that I will need a link to download my install media because my original media came on a series of disks, but my new laptop does not have a disk drive.
Thanks in advance for your help.
Cheers,
James

Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html
OLDER previous versions http://www.adobe.com/downloads/other-downloads.html

CS4 Define Pattern Acting Weirdly!!! Pleas Help (with screenshot)!!!

Similar Messages

Maybe you are looking for