CS5 Photomerge hanging when using many files

Hello,
I have managed to work around the issue, but it's annoying nonetheless.
The basic problem is that I've started creating very wide and tall Bokeh Panoramas or 'The Brenzier Method' http://www.ryanbrenizer.com/category/brenizer-method/
From Lightroom I select the images I want and 'merge to panorama in PS'. When I use say 2 - 30 images it's fine. However when I use say 160 (ridiculous I know) it will hang when merging the files, processor usage stays on 13%, but the progress dialogue bar doesn't animate. I tried it through photomerge and 'align all layers' from the edit menu. I reduced this ridiculous amount to 60 and if I chose the 'vignette removal' option on the photomerge dialogue it will hang on this process after starting to create the panorama. If I don't do the vignette, it will create the panorama.
I know that it will depend upon the complexity of the merge, it's just annoying that it would fail whereas Microsoft ICE will complete the panorama without fail, it just may be of a lesser accuracy due to parallax.
Other than using less images and attempting to overlap correctly, is there much else that can be done?
I'm using an up to date version of CS5 64bit windows. running on a 16gb Core i7 2600k. The merged final image occupies 13gig of ram. I have the scratch disc on a spare 2tb drive with about 1.5 tb free.
Paul

Mr_Fujisawa, I just wanted to come back on here and thank you for opening my mind to the "Brenizer Method", which I had not heard of before. I've been experimenting with it today and enjoying the results! Up to now I put effort into getting everything in focus all across my panos, which are generally landscapes. It didn't dawn on me to use stitching on subjects up close.
-Noel

Similar Messages

AME watch folder - hangs when too many files

I have about 350 vob files in a watch folder, ever time I start up AME it seems to start processing them but it just starts "not responding". I noticed that it is writing files to the Media Cache folder but then just eventually stops after about a min or two. If I only put like 20 files in the folder it works ok.
Is there a way to disable the media cache files from being written? I don't know that they are necessary just for what I'm doing (i'm not previewing or anything). I don't know that it is the issue but it seems AME is hanging on the # of files and the fact that they are VOB/mpeg2. Has anybody ever experienced this?
The # of files is not a one time deal, this will be a reoccurring issue and it would be much nicer to be able to just dump all the files and be done.
I'm using CS5.5, Win 7 64bit, recent i7 Sandy Bridge proc, 16GB ram. The watch folder is on a Synology NAS connected via gigibit, maybe that is part of the problem (that it is not local). The media cache folder is on a local 2TB drive (WD Black) with plenty of room.
Any insight would be appreciated.
thanks
Ryan

The fact that the watch folder is not local to the AME machine may indeed factor in.The process is definitely more robust in a local scenario; network environments complicate matters in a number of ways. Can you run a test where you copy the same batch of files to a watch folder on the AME box?
A few other questions:
Is the "Auto-Encode Watch Folders" option enabled (at the top right of the Queue panel)? And are all 350 files getting added to the AME queue?
If Auto-Encode *is* enabled and some jobs are *not* getting added to the queue, then please try with Auto-Encode enabled.
We're not suggesting this as a workaround but just to give us more insight into where things are failing.
What are CPU and memory usage though the process, from the time you drop files into the watch folder until AME hangs? Are either getting maxed out?
How big are the VOB files? How long does it take to copy all of them into the watch folder?
I know of no way to disable the creation of media cache files.
Thanks for bringing this issue to our attention and giving us an opportunity to troubleshoot it.
Mark Mapes
Premiere Pro/AME Sr. Quality Engineer

Error when using %@ include file="/test.jsp"%&

UsingNitrox version 2.1 M3 (build 419 06022005):
with jdk version: 1.5.0_03 and Tomcat 5.5.9
This is the error :cry: when using <%@ include file="/test.jsp"%> in jsp:
Severity 2
The type java.lang.Object cannot be resolved. It is indirectly referenced from required .class files (test.jsp)
It used to work in previuos version of Nitrox. I can't use struts tiles because the tiles content is dynamic (run time) and I need it to be static (at compile time).
Have you encountered this problem? What is the fix? Nitrox bug?
I need your help please,
Alberto

M7,
I found the problem :wink: . In the java Build path having the default (ALL) is not picking up the content of the package. I had to use add multiple and include all the folders and subfolders (many L) in my packages. After that I added *.java and *.properties to select all the java files. Now it is working. I assume this is a bug in Nitrox. The default ALL should include the all the files in the path.
Thanks,
Alberto

WLS 8.1 hanging when using XA

I am having an issue with BEA 8.1 hanging when using XA. I have configured it
on several other Windows 2000 machines and not seen an issue. This particular
machine seems to hang and then give a time out error. ANy suggestions would
be appreciated. Below is the error that I am getting back and a thread dump.
java.lang.Exception: Exception while commiting Tx : Name=[EJB com.level3.ds9.business.ejb.SearchEJB.getLocations(java.lang.String,com.level3.ds9.common.L3Environment)],Xid=BEA1-001E3F8C31D9BB58DEB7(18601996),Status=Unknown,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=122,seconds left=2878,XAServerResourceInfo[lidPool]=(ServerResourceInfo[lidPool]=(state=new,assigned=none),xar=null),SCInfo[mydomain+brettjason]=(state=active),SCInfo[ds9FT+ds9server3]=(state=active),properties=({weblogic.transaction.name=[EJB
com.level3.ds9.business.ejb.SearchEJB.getLocations(java.lang.String,com.level3.ds9.common.L3Environment)]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=brettjason+10.1.44.74:7001+mydomain+t3+,
XAResources={},NonXAResources={})],CoordinatorURL=ds9server3+10.1.19.141:7001+ds9FT+t3+);
nested exception is: javax.transaction.SystemException: Timeout during commit
processing
Exception while commiting Tx : Name=[EJB com.level3.ds9.business.ejb.SearchEJB.getLocations(java.lang.String,com.level3.ds9.common.L3Environment)],Xid=BEA1-001E3F8C31D9BB58DEB7(18601996),Status=Unknown,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds
since begin=122,seconds left=2878,XAServerResourceInfo[lidPool]=(ServerResourceInfo[lidPool]=(state=new,assigned=none),xar=null),SCInfo[mydomain+brettjason]=(state=active),SCInfo[ds9FT+ds9server3]=(state=active),properties=({weblogic.transaction.name=[EJB
com.level3.ds9.business.ejb.SearchEJB.getLocations(java.lang.String,com.level3.ds9.common.L3Environment)]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=brettjason+10.1.44.74:7001+mydomain+t3+,
XAResources={},NonXAResources={})],CoordinatorURL=ds9server3+10.1.19.141:7001+ds9FT+t3+);
nested exception is: javax.transaction.SystemException: Timeout during commit
processing
"ExecuteThread: '12' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x2
770EB70 nid=0xa34 in Object.wait() [2868f000..2868fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <054801B8> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '11' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x2
76E6858 nid=0x5f8 in Object.wait() [2864f000..2864fd88]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480230> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '10' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x2
76E5C70 nid=0x670 in Object.wait() [2860f000..2860fd88]
at java.lang.Object.wait(Native Method)
- waiting on <054802A8> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <054802A8> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '9' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
6E50B0 nid=0x9c8 in Object.wait() [285cf000..285cfd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480320> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480320> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '8' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71B350 nid=0x9bc in Object.wait() [2858f000..2858fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480398> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480398> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '7' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71BC10 nid=0x7b8 in Object.wait() [2854f000..2854fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480410> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480410> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '6' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71D7D8 nid=0x848 in Object.wait() [2850f000..2850fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480488> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480488> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '5' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71C8F0 nid=0x9dc in Object.wait() [284cf000..284cfd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480500> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480500> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '4' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
71C798 nid=0x824 in Object.wait() [2848f000..2848fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480578> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480578> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '3' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
60B420 nid=0x770 in Object.wait() [2844f000..2844fd88]
at java.lang.Object.wait(Native Method)
- waiting on <054805F0> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <054805F0> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '2' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x26
F9FA10 nid=0xa64 in Object.wait() [2840f000..2840fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480668> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480668> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '1' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x27
580CC0 nid=0x8d8 in Object.wait() [283cf000..283cfd88]
at java.lang.Object.wait(Native Method)
- waiting on <054806E0> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <054806E0> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"ExecuteThread: '0' for queue: 'weblogic.kernel.Default'" daemon prio=5 tid=0x26
F8F6B0 nid=0x7a0 in Object.wait() [2838f000..2838fd88]
at java.lang.Object.wait(Native Method)
- waiting on <05480758> (a weblogic.kernel.ExecuteThread)
at java.lang.Object.wait(Object.java:426)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:145)
- locked <05480758> (a weblogic.kernel.ExecuteThread)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:164)
"Signal Dispatcher" daemon prio=10 tid=0x008B4850 nid=0x978 waiting on condition
[0..0]
"Finalizer" daemon prio=9 tid=0x008FF7F8 nid=0x73c in Object.wait() [26cff000..2
6cffd88]
at java.lang.Object.wait(Native Method)
- waiting on <052A72C8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
- locked <052A72C8> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x008FE370 nid=0xa08 in Object.wait() [26
cbf000..26cbfd88]
at java.lang.Object.wait(Native Method)
- waiting on <052A7330> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:426)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:113)
- locked <052A7330> (a java.lang.ref.Reference$Lock)
"main" prio=5 tid=0x002358F8 nid=0x8a8 in Object.wait() [6f000..6fc40]
at java.lang.Object.wait(Native Method)
- waiting on <052A7508> (a weblogic.t3.srvr.T3Srvr)
at java.lang.Object.wait(Object.java:426)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:1170)
- locked <052A7508> (a weblogic.t3.srvr.T3Srvr)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:384)
at weblogic.Server.main(Server.java:32)
"VM Thread" prio=5 tid=0x008FD138 nid=0x88c runnable
"VM Periodic Task Thread" prio=10 tid=0x008B3390 nid=0x8bc waiting on condition
"Suspend Checker Thread" prio=10 tid=0x008B3E68 nid=0x524 runnable

Running Windows XP (even fully patched up with SP3 and latest fixes), you probably will have an increasing risk of Windows and IE being attacked. Windows XP has been getting security patches every month for over a decade. So it seems likely that people will continue to discover vulnerabilities in Windows XP that, over time, will be exploited (i.e., used in attacks).
Windows 8.1? For a good experience, you probably would be better off getting a new computer than installing 8.1 on a system that is several years old. I realize not everyone's budget permits.
What else can you do? It remains useful and important to keep your third party applications, such as Firefox, and your browser add-ons, such as Flash, up-to-date. It's also a good idea to run quality security software. And practice safe browsing habits like avoiding questionable websites and peer-to-peer networking, and being suspicious of email attachments.

LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program

Hello!
We have the following problem:
LabView (8.2) hangs when using I/O operations with traditional NI-DAQ 7.4.4 after aborting LabView program
We freshly installed LabView 8.2 (2006) and NI-DAQ 7.4.4 on a PC running Windows XP (Service Pack 3). We built a larger vi that remotely controls a traditional NI-DAQ card (AT-AO-10) on a second PC via NI-VISA 5.0.3. We were successfully running this program until a power failure caused the first computer to crash. After this crash we were unable to start the program again: LabView freezes while loading the vi. LabView itself can be started but freezes when adding I/O operations from the NI-DAQ palette to a block diagram.
We have tried to re-install NI-DAQ 7.4.4, but it did not help. We then re-installed all NI software, but still no improvement. In the end we decided to reinstall ALL software, first Windows XP, then LabView and finally NI-DAQ 7.4.4. This worked. However, after a few days of running the program we had to abort LabView via Windows Task manager and afterward we again experienced the same problem as before: LabView freezes when loading the program.
Obviously, we cannot afford to reinstall Windows every time. Are there any known Windows XP / NI-DAQ issues that might cause the freezing of LabView? We would be very grateful for any idea.
Best regards,
Matthias

Hello Sprice,
Browse the shipping examples according to “Directory Structure” and then select
DAQ to find the Traditional DAQ examples.
There a lot of examples that are written for counters (Counter >>
daq-stc.llb >> Count Edges (DAQ-STC).vi).
What kind of signals are your photons creating? Are they TTL compatible at a certain
frequency? You don’t care about overwriting
your buffer?
Respectfully,
Rob F
Test Engineer
Condition Measurements
National Instruments

How can I show additional tab rows when using many open tabs?

How can I show additional tab rows when using many open tabs?

What method (code) did you use to get the Tab bar displaying in the space used for the Navigation Toolbar (location bar)?
The Tab bar should be displayed above the Navigation Toolbar.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Excel Hangs when saving a file

Hi
When saving a file (CTRL+S) excel hangs, no error or anything.
This happens on Windows 8 PRO, on Win7 no problem at all.
Tried on EXCEL 2010 and EXCEL 2013 Customer Preview.
Checking the file after the app crash shows no file exists however 2 files exist instead:
*.TMP file
*.[NOTHING] file
The *.TMP is the new file i just saved, if I change it to *.XLSX it works fine, no curroption.
This was done saving on DESKTOP.
Since file was saved I assumed there is some kind of permission error so I changed the directory permission for "C:\Users\MYUSER\DESKTOP" to "EVERYONE".
With this setup excel saves without a problem....
I guess EXCEL tries to save under a different user which has no permission but why no error?
Any ideas?

Hi,
Check to see whether the user you logged on to the system has the permission to the file.
Also, check to see whether the following link is helpful:
http://support.microsoft.com/kb/271513
http://support.microsoft.com/kb/313937
And, based on my research, hang when saving the file also maybe caused by a printer installation.
Check to see the following link:
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/04/12/excel-hangs-or-becomes-unresponsive-when-saving-or-closing-a-workbook.aspx
Jaynet Zhang
TechNet Community Support

My 64Bit Adobe CS6 hangs when loading a file

My Windows 7 Adobe CS6 v13.0.1 x64 hangs when loading a file. However the CS6 v13.0.1 x32 application runs correctly. Do I need to re-install Adobe CS6 Upgarde?

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

3?'s: Message today warning lack of memory when using Word (files in Documents) something about "idisc not working" 2. Message week ago "Files not being backed up to Time Capsule"; 3. When using Mac Mail I'm prompted for password but none work TKS - J

3 ?'s:
1 Message today warning lack of memory when using Word (files in Documents) something about "idisc not working"
2. Message week ago "Files not being backed up to Time Capsule";
3. When using Mac Mail I'm prompted for password but none work
Thanks - J

Thanks Allan for your quick response to my amateur questions.
Allan:     I'm running version Mac OS X Version 10.6.8     PS Processor is 2.4 GHz Intel core 15
Memory 4 gb 1067   MHz DDr3 TN And @ 1983-2011 Apple Inc.
I just "Updated Software" as prompted.
Thanks for helping me!    - John Garrett
PS.
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro6,2
Processor Name:          Intel Core i5
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MBP61.0057.B0C
SMC Version (system):          1.58f17
Serial Number (system):          W8*****AGU
Hardware UUID:          *****
Sudden Motion Sensor:
State:          Enabled
<Edited By Host>

Camera is hanging when using with flash

Hi Lenovo Team,
In lenovo vibe x2, camera is hanging when using with flash.Getting "Lenovo snapit isnt responding" error and screen hanged for sometime.after that when tried to open camera "Cannt cannot to camera " error is coming till when restart the phone.
Even tried Factory reset and software update.
Please provide the solution for the above issue.
Thanks,

Hi vijayprabhu,
I just tested the X2 however am not having the issue. I set flash to always on then took a picture using SnapIt however its fine.
Please check if you have the latest firmware S125.
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

PS CS5.1 crashes when using file open but not with bridge or "open as smart object"

I'm using a Mac with Snow Leopard and Photoshop CS5.1 Extended
When i try to open a file largen than ~50MB with double click in finder or with file>open in PS, the program loads the psd and shows it, then 2-3 seconds later PS crashes. If the psd is under ~50MB everything is fine.
If i open it with file>open as smart object or via the mini bridge, everything is fine, and i can work with it.
How can this be fixed?

Make sure you submit your crash report as it helps us track and resolve code for crashing issues.
Submitting Crash Reports: http://adobe.ly/gNJWVY
If you post one of you crash reports here?
Location of Crash Reports:
Users/<your user name>/Library/Logs/CrashReporter

Dreamweaver hangs when using double slash file includes?

When I use Dreamweaver CS6 for Web Development I experience problems when using code with double slashes, like the following:
<script src="//ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js"></script>
Everytime I try and edit the page Dreamweaver will hang maybe 30 to 60 seconds, I believe its trying to locate the include locally which will always fail.
I have turned dynamic discovery off but it still happens, is there a fix for this issue?

Silver89 wrote:
My question is why does Dreamweaver hang and why can we not prevent that from happening?
To be completely honest, it hangs because DW isn't programmed to handle it the way we'd all like. As far as keeping it from happening, you "could" develop with the http there. I would suggest using a php include to add the link into your <head> section as the http version during development. That way, when you go live with it, you only need to change it once for the entire site. It's not the best solution, but it should do the trick and get DW to behave, until Adobe fixes the problem.
You can help bump this issue up in the list of bug fixes by adding your voice here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Illustrator hangs when saving .ai files with linked or embedded images

Hi,
Currently I have a huge problem with Adobe Illustrator. When I place an image file inside an Illustrator document, the program freezes for about 45 seconds when saving. In the beginning I though it was just because my image file was too big, but that wasn't the case.
To test what's going on I created a new document, drew a few lines and saved. No problem, Illustrator saved immediately. Then I placed a bigger image and suddenly Illustrator hang when saving. I repeated this with a very small GIF of just a few kB and again, Illustrator hang for nearly a minute when saving the image. I tried embedding the image instead of linking it, but I still got the same results.
Then I turned of the visibility of the image object by clicking on the little eye symbol in front of the image object and suddenly Illustrator was able to save quickly again. The next thing I wanted to try was turning off compression and PDF compatibility, but then I noticed that Illustrator is actually hanging BEFORE writing the file to disk. When I hit "Save as" Illustrator asked me where to save the new file and then after clicking "Save" it hang (showing "(Not Responding)" in the title bar). About 45 seconds later the save options dialog came up and when I clicked "OK" it saved the file immediately.
Does anybody know what the problem might be? I'm using Illustrator CS5 on Windows 7 x64. The computer is a notebook with 8GB RAM and a switchable graphics card. I tried this on both the integrated Intel graphics unit and on the much more powerful AMD chip. The hard driver I'm saving to is the local hard drive (no network drive etc.).
This is a more or less fresh installation (I haven't used Illustrator before on this notebook) and I can't remember that I had the same problem on my workstation where I used it inside a virtual machine (which doesn't exist anymore).

Yeah, I know that changing the mode results in different colors. I just switched back and forth to check out what's going on.
For CMYK I'm using ECI profiles which are common in Europe and for RGB the normal Adobe RGB 1998 profile. The profiles are synced between all Creative Suite products. I tried sRGB and some of the default profiles which shipped with CS5 but it produces the same result. I also deleted my whole Illustrator profile but without success.
My graphics card doesn't have any updates. But it would be very unlikely anyway that both drivers for both cards had the same issue. If it has something to do with my graphics cards it's more likely the switchable graphics in general.

Application hangs when using ProcessStartInfo and Process.WaitForExit.

I've looked on different threads about this, but all of them uses the Process.RedirectStandardOutput = True, which I don't.
I'm trying to open a process (console application, not made by me) to make it compile a special .acs file to a .o file. The structure is simple, the only argument is the file you want to compile.
But on certain files my application hangs when trying to open the process. Here's my code:
Dim p As New Process
Dim ps As New ProcessStartInfo
ps.Arguments = SavePath 'Path example: "C:\Program Files (x86)\Zandronum\File.acs"
ps.FileName = Path.Combine(System.AppDomain.CurrentDomain.BaseDirectory(), "Script Compilers\Zandronum\acc.exe")
ps.CreateNoWindow = False
ps.ErrorDialog = False
ps.UseShellExecute = True
ps.WindowStyle = ProcessWindowStyle.Hidden
ps.WorkingDirectory = Path.GetDirectoryName(SavePath)
Dim ErrorCaptured As Boolean = False
Try
p = Process.Start(ps)
Catch ex As Exception
ErrorCaptured = True
End Try
If ErrorCaptured = False Then
p.WaitForExit()
End If
If ErrorCaptured = True Then
Exit Sub
End If
Thanks!
//Visual Vincent
EDIT:
For starting the process I use pretty much the same code that another guy made in C#. And his code is working perfectly...
// Setup process info
processinfo = new ProcessStartInfo();
processinfo.Arguments = args;
processinfo.FileName = Path.Combine(this.tempdir.FullName, info.ProgramFile);
processinfo.CreateNoWindow = false;
processinfo.ErrorDialog = false;
processinfo.UseShellExecute = true;
processinfo.WindowStyle = ProcessWindowStyle.Hidden;
processinfo.WorkingDirectory = this.workingdir;
try
process = Process.Start(processinfo);
catch(Exception e)
// Unable to start the compiler
General.ShowErrorMessage("Unable to start the compiler (" + info.Name + "). " + e.GetType().Name + ": " + e.Message, MessageBoxButtons.OK);
return false;
// Wait for compiler to complete
process.WaitForExit();
I hope your day has been better than yesterday, but that it's worse than tomorrow...
Please mark as answer if I solved your problem. :)

Hi,
Have you compared the FileNames and Arguments of ones that work and ones that don`t? Is there any difference in them such as the ones that work do not contain blank spaces in the FileName or arguments and the ones that do work don`t contain blank spaces
in them? If you find that to be the problem then you need to add Quotes to the beginning and end of the FileName or Arguments.
My first guess is the Arguments needs the Quotes like this because, i see blank spaces in your example of the Arguments.
ps.Arguments = Chr(34) & SavePath & Chr(34)
If you say it can`t be done then i`ll try it
This actually made it. I had forgotten that blank spaces makes it a new argument, silly me. I don't use process arguments that often. ;)
Thanks alot!
I hope your day has been better than yesterday, but that it's worse than tomorrow...
Please mark as answer if I solved your problem. :)

Time Capsule reboots when accessing many files

Dear other Mac users,
My TC is showing a weird behavior since yesterdy. I got my TC on tuesday of this this week and immediatly started uploading all data from an old HDD to the TC after I setup the TC according to my needs with the airport utility.
I'm using accounts to access TC's HDD and all my media files (music, pictures, ...) are in separate folders within the "shared" folder that can be accessed by all accounts.
I tried to import all pictures into my picasa lib what worked fine. Then I imported all music files into my iTunes library and this worked fine for a subset of my music libary on the TC (didn't import all at once).
Yesterdy (thursday) I tried to add all other music files I left out during the initial iTunes import and after a while my TC went to a yellow/orange light and all services (networking, internet, harddrive, printer) went offline. The TC seems to crash and reboot itself. After esimated 30 secs everything is back up and running.
This behavior got even more extrem now. Picasa worked fine at first but now crashes more frequently. Seems with every thumbnail update or access on a number of files the TC crashes and reboots.
Same with iTunes as soon as I try to import a number of music files from the TC iTunes hangs and the TC reboots.
Interestingly, accessing only one file by f.i. browsing with the finder and opening it solely, everything works fine and I can watch videos or open picures (even big videos are played perfectly).
How comes that access to many files on my TC causes a reboot?
-Michael

UPDATE: I checked the data on the TC drive more intensively and here is my final opinion about that whole problem:
- There are several files that got corrupted (no idea how that happened, apple probably didn't do a good job here)
- All other files can be accessed perfectly, the corrupted files can't be read and cause a TC crash+reboot
- Corruption might be solvable by running a HFS repair (fsck_hfs)
Does anyone know if theres a chance to run a HFS repair on the TC.
Is any drive repair software on the TC firmware?
Can the drive be accessed directly (instead of using AFP) f.i via iSCSI?
Any help here?
regards

CS5 Photomerge hanging when using many files

Similar Messages

Maybe you are looking for