CS5 Slideshow duration won't update to new audio clip

In a completed slideshow with "Fit slideshow to audio duration" checked (duration 00;19;32;24), I decided to replace the audio with a shorter composition (00;10;00;22). With the original audio clip cleared and the new audio clip added and the "Fit slideshow to audio duration" checked, the slide durations recalculated so that the last slide has an out point of 00;10;00;22 but the slide show duration remains "stuck" at  00;19;32;24. The end action is set to return to the menu but when the last slide goes to black (at 00;10;00;22) the slideshow keeps running with a black screen, presumably all the way to 00;19;32;24 before it hits the end action, although I haven't let it run to that point yet. I have turned "Fit slideshow to audio duration" off and back on, hoping it will recalibrate to 00;10;00;22 but the duration doesn't change. Help, please!

Try playing with these ideas:
Uncheck "Fit Slideshow to Audio Duration."  (As you probably now have it anyway.)
On the slideshow properties, basic tab, set the slide duration to zero.  What is the slideshow length now?  The length of the new audio or the old?
Or, set the slide duration to something large (I think so that the total is more than either audio length).  What is the slideshow length?
Now check "Fit slideshow/audio."  What is the length?
I got the same symptom you did (audio plays past end of slides) when the slide durations added to less than the audio length and "Fit slideshow to audio" was not checked.

Similar Messages

  • Does iTunes Connect Christmas break mean apps won't update with new folios over Christmas?

    I have 2 folios that are due to be released to my app this Christmas - both fall within the 22nd-29th window iTunes have chosen to close down.
    So even though I can publish my folios through DPS over Christmas and pre-plan my app description in iTunes accordingly - before the 22nd - will those published folios not appear in my app?
    Thanks.

    You mean updating a paid folio... don't know if that needs approving, too.
    Maybe someone else can chime in here (I have no exp in that)
    (mobil gesendet)
    Am 16.12.2011 10:05 schrieb "jamie.dunmore" <[email protected]>:
       Re: Does iTunes Connect Christmas break mean apps won't update with
    new folios over Christmas?  created by jamie.dunmore<http://forums.adobe.com/people/jamie.dunmore>in
    Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4088490#4088490>

  • My apps won't update and new apps won't download..help?

    I have ipad with retina display and my apps won't update and new apps won't download

    Is your iPad restricted?
    Check Settings > General > Restrictions

  • 3rd generation ipod touch won't update to new OS

    I have an ipod touch, 3rd generation, 64G, model no. A1318 that has given me headaches every time there is an OS update. I usually end up with an ipod that needs to be restored and then upon restore the OS is updated. This time however, nothing is working. I get different error messages (this time it was error 1602 and then upon restore it was 3194). I really want to update my ipod as I use it a lot and this is driving me nuts. This time I can not reload apps that I has previously (like ibooks) because I need the update but it won't update. Can anyone give me any helpful suggestions please. I have read other threads and YES I AM POSITIVE it is 3RD GENERATION. Thanks

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    3194
    See the actions for that error here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    iPhone Error 3194 - How to Fix iTunes Error 3194?
    Fix Error 3194 from iTunes during iPhone restore

  • Intel 82567LM won't update to newer release automaticly or manually w/x200T win7 64bit

    I'm getting the occasional bsod in win7 64 on my 7450-CTO. IT's a 0x0000007F which is sometimes the nic driver. So, I went to the regular download/support section, looked at the matrix and found that the Intel lan drivers is still listed as vista32/64 but it's five versions higher than my current version 9.52.10.1001 -  I downloaded the 64bit  package @ http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70199 , and ran it but it says it doesn't detect any applicable device. 
    I  then ran the Thinkvantage System Update. It found a number of updates (14) and applied them. Including the updated Intel Wireless (I have a 5300).  It didn't download or install the 7vrv21ww either.  It says that this driver version has a fix for BSOD..... I ran it again, and it found another wireless update (one required the other?), along with several updates for hotkeys, audio, etc.  I'm installing them though I don't have any issues with those items. 
    I went to the Device Manager and checked the properties for the Intel 82567LM and tried to get it to update the driver from that point, and was told, 'You have the best driver already installed'   
    SO my question is,  HOW do I get this to update the lan driver to the current 9.52.25.3 version? 
    TIA. 

    At the time we found that it was related to a TCPIP stack issue. 
    But at this tiem, it doesn't really matter since we can't get it to update automatically.  TVSU should detect that there are 5 later releases of the driver, all of which address some errors, including a BSOD in the latest. 
    Since there is no official branched Win7 release for the 82567LM via Lenovo they are still using the Vista 'version' according to the matrix, that someone has not updated the package information correctly  to make it download/install on the Win7 OS system and that the package itself isn't setup to detect and install on Win7 which it should do -  according to the driver matrix.
     Frankly if you were not having a problem and were used to manually searching out the drivers, you would never know that there is a updated driver.  Those who remove the Lenovo tech support stuff are not using custom drivers anyway and Intel has also had multiple updates and the latest one also has a BSOD fix; and it is for Win7 and Vista....

  • Won't recapture with new audio setting

    when i initially captured some of my clips in FCP 4, i made the mistake of using the audio setting "mono mix".
    since then, i've upgraded to FCP 5. i've also finished the project. now, i'd like to go back and recapture the clips, setting the audio to the proper setting of 2 separate mono tracks, the way it should have been in the first place.
    i should note that "mono mix" did not result in one mixed down track; it captured two tracks of audio in a stereo pair, listed in the browser as "1V, 2A" with "1 stereo" but i suspect it mixed them in a weird way because they sound quite low and muddy.
    in any case, i've been trying to recapture with a new audio setting. however, nothing seems to work. i've tried making all the clips offline, changing their settings with "modify", then recapturing with the audio toggled to 2 mono tracks... it still comes in as "1 stereo" pair. i've tried the other way, setting the log & capture settings to 2 mono, unchecking the "use current clips settings" box... it comes in "1 stereo". i've tried trashing preferences and redoing the above. i've tried putting the clips in a different project.
    any suggestions? thanks.

    apparently when you capture in "mono mix" it captures 2 tracks, but makes them identical mixes. so you lose all the phasing and mixing from the field and wind up with two dullish tracks. to unlink them wouldn't change this.
    however, i think i figured out a way through a post on creative cow -- i exported a batch list of the offending clips and opened this in Excel. then i went in and changed the audio track column manually, to "2 Mono", then imported the batch list back into FCP. then recaptured using these new clip settings.
    seems to work! (knock on wood).

  • Java won't update - A newer version is already installed

    Hello all,
    I'm operating on a MacBook Air that i recently updated to OS X 10.9.2. Along with the update, Java 7 was installed. I need to have Java 6 Update 20 installed to use some programs on this computer for work. I've gotten the files to install that update, but when I attempt to do so I receive a message stating that I cannot install on my disk. A newer version is already installed.
    I've gone into finder > Go to Folder and deleted the Java folder after uninstalling java in the first place. This has not fixed my issue. Please advise. I'm sorry if this is in the incorrect format. I wasn't able to post to the applications group.

    Hi Christopherbronson,
    If you need to reenable Java 6 on your machine, you may find the following article helpful:
    Java for OS X 2014-001: How to re-enable the Apple-provided Java SE 6 web plug-in and Web Start features
    http://support.apple.com/kb/ht5559
    Regards,
    - Brenden

  • Ipod won't update on new computer!! please helppp

    well i recently got a new computer and decided to move all the songs form the old computer over so i did. now i need to update my ipod and for some reason when the ipod is connected it seems to work .. but then the problem comes it says updating ipod do not disconnect and about 5 second later its already done updating except the ipod did not get updated and still has the old songs i had on it.. can anyone tell me how i can solve this problem? thanks

    Try moving all of your files out of the main folder they're in... then dragging them into the iTunes library in iTunes itself.
    Then when its done processing them all, try updating again.
    they have to be in the library and (prolly) CHECKED for iTunes to sync them.

  • IPod Won't Update with New Playlists and Audio Only

    My iPod will not update new playlists that have been created or add any audio files from iTunes. Videos come over just fine. Powerbook 12" G4 with 10.4.4, iTunes 6.0.2. Latest iPod software, 0106, deleted the old iPod updates. Also, did a hard reset on the iPod.
    Under my administrator test login, playlists and songs come over fine, but I can't seem to get it to work in my regular account. Any idea what do do without reformatting my hard drive and reloading software?

    I also just started having this trouble on my 6 month old nano. I have it set to automatically update selected playlists only. I update the songs in those playlists in itunes, then I connect my ipod to my PC. The ipod and itunes say it is updating, but when done the same old songs are on the playlists in the ipod. Itunes does show the correct playlists with the update songs, they just don't seem be updating on the ipod, even though there seems to be a good connection and the ipod says it is updating when plugged into the PC. Any thoughts?

  • I can't update my I Pad 2 Apps. The App Store won't update my new Apple ID.

    I have a old I Pad 2 and all Warranty's have expired. I did a total update with My Apple Account on my computer with My I Pad 2 connected to I Tunes and I had no problems updating all my new Apple ID because I changed Communication Companies. I now have a new email address but can't update my Apps because my old Apple ID keeps showing up, asking for my password. Can some kind person help me with a good useful answer ?

    Hello and thank you for your time. First of all my former Apple ID was my old email address and that was closed because I changed internet companies. Next I had my new internet company email address that I had to put into my AppleI Pad 2 settings, to receive all mail etc. That's why I had to use the new email address for my Apple ID. Then the problem with the I Tunes Store. I never used Apps that had to be purchased and I never purchased anything from any Apple I Tunes Stores. I guess I will try like you suggested and close all apps and then re update them onto my new email address. If that doesn't work, then I will wait until I purchase my new I Pad because Apple have told me that they will fix this I Pad 2 for me and I can do with it as I please. Again I thank you sincerely for your kindness in taking time to give me advice, I really appreciate it.

  • Iphone won't update to new 8.0 operating system

    MY iphone 4 says that it has the latest version operating system but it doesn't.
    I have tried:
    deleting apps so as to have enough space.
    syncing the phone.
    updating through i-tunes.
    I am trying to update to the new 8.0 operating system. Ideas?

    You cannot update iPhone 4 to IOS 8. The highest you can update iPhone 4 is IOS 7.1.2.
    If you want IOS8 you need iPhone 4s or later.

  • Nokia N86 won't update to newer version.

    Hey guys.
    I'm on software version 11.043, and I know update 20.115 is out, yet trying various updating methods, I'm told there's no new version, and I'm unable to update.
    How do I fix this?

    Sadly there is no way to "fix" this without voiding the phone´s warranty (matters that can´t be discussed here)...
    What turns out if you have a look at the link below? 
    http://europe.nokia.com/get-support-and-software/download-software/device-software-update/can-i-upda...
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • I pad APPs won't update or new ones won't load since IOS 8

    Since  IOS 8 my IPad 2 will not update APPs or allow new APPs to be loaded...it just freezes and doesn't load. This was never a problem with IOS 7

    Take offany automatic downloads you have. If any are spinning tap them to delete the download process. Power down and restart your device, then tap to download each app ... manually ... and don't have more than two going at the same time.

  • TS3988 Can someone please help me?   I have an Iphone 5 and Love it except for one thing. I changed  email address from yahoo to Gmail and updated it on my Apple ID at Apple.  Apple recognizes and accepts this change but Icloud won't update the new email

    I have an Iphone 5 and Love it.  Except for one thing;  I recently changed from ymail email account to a gmail account. I updated it on the
    Apple/ Itunes site and it does accept the change.  I can still access the APP store and Itunes. 
    However, sometimes I get a pop up box from Apple showing the old email address and asking me to sign in..... I hit cancel and move on.   But, now Icloud keeps popping up promting me to sign in and it shows the old email which I don't have anymore.... I tried signing in with the old info to clear it off screen of my phone but, it doesn't allow and I hit cancel and it goes away. only to appear later again....  This is so frustrating and annoying.    Is there any way to get the Icloud to update the email address with my Apple ID log in info--without having to delete stuff or lose things on my phone? 
    Please help?  
    Dia

    Thank you for replying.    Yes I deleted the old email address..   

  • "Browse File/Music" won't update with new songs?

    Anytime I go into my blog and attempt to upload a song I have, I click "browse" and then select Music from the files list. Everything is all up-to-date EXCEPT the music section. It hasn't updated for a long time, I've restarted, updated software, ect.
    Any suggestions?

    I also just started having this trouble on my 6 month old nano. I have it set to automatically update selected playlists only. I update the songs in those playlists in itunes, then I connect my ipod to my PC. The ipod and itunes say it is updating, but when done the same old songs are on the playlists in the ipod. Itunes does show the correct playlists with the update songs, they just don't seem be updating on the ipod, even though there seems to be a good connection and the ipod says it is updating when plugged into the PC. Any thoughts?

Maybe you are looking for

  • How do I use two Ipods with my Itunes?

    I just bought an additional Ipod. How can I get songs just for this ipod? When I connect it, is it going to download my music to the new one? I want to have two separate files. Please help.

  • Bpm process registration with osb

    Hello I have sucessfully registered my bpm process with an osb instance and when i check osb console it shows it under projects.It only has a business service in it and i wish to check what is its wsdl of the registered service, can anyone please gui

  • What is better to use?

    Hi all, 1) request.getSession(true) or request.getSession(false), I know the different and yet what is the best to use? 2) In every jsp page of my application I use session = request.getSession(false/true). (Depends on the first answer), are this ok?

  • Trackpad & USB port

    My trackpad on my macbook pro is highly unresponsive.  To circumvent this problem, I tried using a USB wired mouse but it wasn't long until my cursor (while using the mouse) started moving uncontrollably.  Anyone have any idea what the problem may be

  • How many macs can i upgrade to mountain lion if i used the free upgrade program

    I recently bought a macbook air and received the free upgrade to mountain lion. Will i be able to just simply go to my app store account on another macbook (macbook pro snow leopard) and upgrade that to mountain lion as well?