CS6 Beta TIMED OUT - Working with Techs for Resolve

I've been using CS6 Beta for many months. The other day, I could NOT get passed the "Continue Trial" dialog. Thus, I am unable to use the app and report bugs to Adobe. I'm working with Adobe techs to see if we can identify the problem and find a common resolve for others who are running into the same situation.
Additional information, when available, will be made here.

Thanks Marc,
We'll get back to you soon!

Similar Messages

  • Timed out error with Fp-2000 while find devices

    When I try to Find Devices in MAX (version 3.1) I get the error "The connection to a remote device timed out". With the File Transfer and the Install Software I don't have the problem. I tried to use a different Workstation, different IP Address but the problem persists. Do you have a solution?
    Vincenzo Pascariello

    Hi,
    the 2 flashes of the Status led are indicating that the software is not properly installed.
    As for the Devices not found problem, I don't think the problem has to do with MAX, FP software or LabVIEW 7.1.
    When devices are not found, generally there is a communication problem.
    This can be possibly due to 2 situations:
    1) There is a bent Pin on one of the FP-TB which is making the Fieldpoint bus not to work properly.
    2) There are network problems. One way to workaround this might be to connect to the FP-2000 using a crossover cable and link directly to the PC. This avoids any network connection problems.
    The last thing you need to take into account is that the FP-2000 module might be damaged and need repair.
    If you are unable to get to a solution, contact NI Tech Support at
    02.41.30.92.17 and ask for support with an Engineer
    Regards,
    AlessioD
    National Instruments

  • Can I use InDesign cs6 to open and work with PM6.5 files?

    Can I use InDesign cs6 to open and work with PM6.5 files?

    Lrak wrote: "It sounds like I should to that before endeavoring to transfer the manuscript?" (re-link)
    It should be much easier to re-link in the Pagemaker file, as, with any luck, you can get the filenames from the Graphics Manager.  After conversion to InDesign, any out-of-date linked images get their names converted to something like "image 123.jpg", and are themselves converted to an embedded low res representation of the image.  Even vectored art.  Pretty hard to figure them out, unless you are VERY familiar with the file, which you may be.
    It may be that any cropping gets lost, too?  I do prepress work, we do some set up for our customers, but most comes in pretty much ready to go, so I don't often have to did too deep into fixing such issues. On the other hand, any problem that can happen has probably crossed my desk, or it seems that way some days!

  • When trying to update apps an invalid apple id show up and I cannot get the apple id to update to the same id,  I have restored, restored as a new phone, I have been into the manage I am at wits end after 7 hours on hold and working with techs.

    When trying to update apps an invalid apple id show up and I cannot get the apple id to update to the same id,  I have restored, restored as a new phone, I have been into the manage I am at wits end after 7 hours on hold and working with techs.

    Finally got through to tech support and found someone who seemed to know what was going on, he walked me through and using appleid.applesupport got me to a point where i could get a new password for the apple id that kept showing up. 
    I think you were on the right trail and I want to say thanks for your help.  Much appreciated
    ccl43

  • Office OneNote 2013 working with OneDrive for Business

    M$ is going to be the death of me.
    So here's what I have Windows 8.1 Pro with Office 2013 Pro with OneDrive for Business with our own SharePoint 2013 environment running on a tablet. 
    I open this lovely OneNote Product and all it asks me is to sign into my M$ Account, I don't want to use my M$ account I want it to just open and allow me to create a new notebook...  It just asks me to sign into my M$ account.  I don't want to
    do that.
    So I got into my SharePoint document library,click New document, create onenote document, open it and OneNote prompts me to log into my M$ account.... 
    I don't want to use my M$ account, I want to use my OneDrive For Business and the SharePoint 2013 environment we've paid thousands of dollars for...
    Another funny thing I found is, OneNote 2013 for Mac, works with OneDrive for Business?!?!  On Windows?  NOPE!
    Am I missing something simple?

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Best Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

    I imported about 300 RAW images yesterday and worked with them for about an hour. iPhoto locked up on me and I rebooted. After I did the event icon for that event is now gray and it says there are no photos. I know the photos are there. Any idea how I can recover them?

    a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card --  I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

  • How to work with otool for pre check app befor submit to app

    any body  work with otool for pre check app befor submit to app.

    Searching in Google, I found these explanations :
    Timmy OTool is a graphical front end for the command line tool "OTool". It can be used to examine frameworks, applications, static libraries, plugins, and more.
    Like the two others helpers, I can't see any link with this forum theme.
    May you take care of forums deicated themes before entering one of them ?
    Yvan KOENIG (VALLAURIS, France) jeudi 16 juin 2011 16:27:11
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !
    Oops, posted too late

  • I can not get my MB Pro to recognize my cox e-mail worked with cox for about an hour and a half last night  and they said it has to be somthing in the app on the computer or the computer itself

    I can not get my MB Pro to recognize my cox e-mail worked with cox for about 1 1/2 hours they said it was the operating system or the computer we tried everything and different ways to set up but no luck

    Hello Manny1212,
    The following article provides some useful troulbeshooting steps that can help get your Mail working.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Cheers,
    Allen

  • I cannot get my Logitech webcam to work with Lync for Mac

    I cannot get my Logitech Webcam or Cinema Display facetime webcam to work with MS Lync. Lync always uses the Macbook Pro's standard webcam and does not give any options anywhere to choose between video devices. The same webcam works with GotoMeeting, Viber, Skype and Google Hangout without any problems.
    Does anyone know how I could get it working with Lync for Mac too? I have the Lync for 2011 version 14.0.7.

    Hello.
    Please download the latest Windows 8 drivers from our website.  You can visit the following link to download the drivers:
    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx410#Dr...
    If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."

    When I update apple driver, a pop-up error message "The folder you specified doesn't contain a compatible driver for your device. If the foldre contains a driver, make sure it is designed to work with Windows for x64-based systems."

    Hi,
    Please also check Event Viewer if it identify this problem.
    In addition, also check Device Manager, if similar driver already installed, try to uninstall them and reinstall new driver again for test.
    Roger Lu
    TechNet Community Support

  • HT4972 hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it for example i have a ipad 1st and i dont know whats is the latest version of ios for this device thanks

    hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it. for example i have a ipad 1st and i dont know whats is the latest version of ios for this device

    Google "iOS versions" and read the first match (Wikipedia)........

  • AIR SDK 17 (BETA) is not working with Flash CS6

    Hi,
    The latest AIR SDK 17 is not working with Flash CS6.
    I tried to publish and install an iOS app to my connected device via USB but I always get an error "Check if iTunes is installed".
    The latest stable AIR SDK 16 is working fine, and yes, iTunes is installed on my PC.
    DETAILS:
    - Flash CS6
    - AIR SDK 17
    - System: Windows 8,1
    - iPodTouch with iOS 8.1
    REPRODUCE:
    Open new AIR iOS template and publish/install it to a USB connected iOS 8.1 device.
    Anyone else got that error?

    I was getting this intermittently.   Not a super problem.   A remove and install in iTunes gets it loaded (after you tell ITunes where it is).

  • How do I fix problems with iTunes Store timing out when I search for music?

    So, I downloaded iOS 7 not too long ago. However, when I tried to do a search on the iTunes Store app, it keeps timing out (it also stalls when I attempt view a song list on a specific album. My phone has no cosmetic or liquid damage, and. I have already performed a soft reset on the phone. Does anybody have a solution, or is this just a bug in the new software that needs to be fixed?

    Also having problems connecting to the App Store without it timing out.

  • Setup is timing out when running install for M175 on Win XP Pro

    This is a new problem that has come up since I changed  my WEP code on my WiFi and am now trying to edit it for my printer to continue operating wirelessly. theis setup has been working for almost three years.
    I've tried running setup (4.0.2.6223) with USB or Wireless configuration and in every case it times out (Fatal Error:  An install operation took too long to...). I've reviewed the HP blogs and tried many of the solutions with no luck. I am logged in as administrator and have changed spooling to manual in services. I have tried to turn off all services and hide the MS stuff in msconfig but I get an access error. I also believe that Universal Printing services is on but don't know where to disable it.
    I have done tech for the last 25 years and have had literally hundreds of HP products. This proble has brought me to my knees.
    I hope you can help
    Thanks
    Ron Joyal

    Thanks for letting me know that information RonJoyal. Sorry to hear that you are still unable to install the software, you are also having the same issue with a second computer.
    I believe with the USB install the Universal driver is the default driver being installed which is causing this issue.
    Please follow the steps provided below:
    Remove the drivers first from the Print Server Properties. How to Locate Print Server Properties for Windows 7. On the Driver tab, highlight and remove the printer. Remove the Laserjet and any Universal drivers.
    Run the uninstall again to remove all the files that previously installed.
    Run the install again. After connecting the USB, immediately follow this document please, to update the driver. The driver is probably defaulting to the Universal driver which is causing the software to time out. Then the install should continue through. A Fatal Error Displays During Software Installation.
    Are you doing this installation remotely?
    If you are still running into issues, then connect the Ethernet cable from the printer to the router, temporarily.
    Run the install to see if the drivers will fully install by this connection. 
    Follow these steps to configure the wireless now.
    Wait about a minute, print the configuration page to see if you get a IP address. 
    Printing a Configuration Report.
    Then type the IP address into Internet Explorer's address bar to bring up the printer's web page. Select the networking tab, wireless on the left hand side. Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings. 
    Then disconnect the Ethernet cable.
    Wait for few minutes and you should get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page. Just to make sure it is still on the network.
    Then flip the port with the new IP address. 
    Go to start, devices and printers, right click the printer and left click printer properties, select the ports tab.
    Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
    Type in the proper IP address for the printer.
    Make sure the printer is online.
    Test the printer.
    Let me know the results.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Keynote remote app no longer working with keynote for ipad

    noticed after upgrading that the keynote remote does not pair with keynote for the ipad.  Any suggestion on a resolution or anyone else experiencing this issue?

    I didn't realize until I went to a class to lecture in front of a couple hundred students that what worked on Friday no longer worked on Monday.  (I upgraded to iOS 5 over the weekend.)  My iPad with lecture slides was plugged in 25 feet away.  I finally recruited a student to tap the iPad screen when I needed the next slide.  A nightmare.  What is usually slick and seamless was a wreck. 
    Here's my deal.  My remote app works fine at home where my iPod Touch and iPad are on the same wifi network.  At school they're on different networks for some reason.  Bluetooth doesn't work anywhere.  So Apple needs to find this bug and fix it.  I can't believe whoever is responsible for this didn't test this out before they released iOS 5.  Sheesh. 

Maybe you are looking for