Can I use InDesign cs6 to open and work with PM6.5 files?
Can I use InDesign cs6 to open and work with PM6.5 files?
Lrak wrote: "It sounds like I should to that before endeavoring to transfer the manuscript?" (re-link)
It should be much easier to re-link in the Pagemaker file, as, with any luck, you can get the filenames from the Graphics Manager. After conversion to InDesign, any out-of-date linked images get their names converted to something like "image 123.jpg", and are themselves converted to an embedded low res representation of the image. Even vectored art. Pretty hard to figure them out, unless you are VERY familiar with the file, which you may be.
It may be that any cropping gets lost, too? I do prepress work, we do some set up for our customers, but most comes in pretty much ready to go, so I don't often have to did too deep into fixing such issues. On the other hand, any problem that can happen has probably crossed my desk, or it seems that way some days!
Similar Messages
-
What apple software allows me to open and work with excel files?
What Apple software allows me to open and work with Excel files?
Numbers, OpenOffice, Microsoft Office 2008 or newer, or similar products. Microsoft Office 2004 doesn't work in 10.7.
(86805) -
This is what message I get when trying to open on my Mac OS X 10.10 (The file “Record of Work Nov28-Dec11-2014.numbers” couldn’t be opened), which the same file that can be opened from my IOS 8.1 iPhone.
Seriously *** givesThe most likely reason you can't open this file is that you are using an old version of Numbers. It's easy to accidentally attempt to open your document with the previous version (V2).
In rare cases, the document can be corrupt and your only recourse is to grab a backup copy.
Jerry -
Can you use PDF Pack to open and read PDF files?
Can you use PDF Pack to open and read PDF files?
Hi Keith,
PDF Pack is a conversion tool which would convert PDF to different formats and vice versa. It cannot be used for reading PDFs.
If you want to open and read PDF file you can use Adobe Reader.
You can download Adobe Reader from below mentioned link.
Adobe Reader
let me know if you have any other questions.
Regards,
~Pranav -
How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.
how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
NO STANDARD PAGE HEADING LINE-SIZE 255.
Declaring internal tables *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
dummy(255) TYPE c,
END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
ematn(18), "Material Number.
menge(13), "Qyantity.
netpr(11), "Net Price.
werks(4), "Plant.
ebelp(5), "Item Number.
END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
lifnr(10), "Vendor A/c No.
bsart(4), "A/c Type.
bedat(8), "Date of creation of PO.
ekorg(4), "Purchasing Organisation.
ekgrp(3), "Purchasing Group.
x_data LIKE TABLE OF it_idata,
END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
Search help for file *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
START-OF-SELECTION.
To upload the data into line structure *
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = it_dummy.
Processing the data from line structure to internal tables *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
IF it_dummy-dummy+0(01) = 'H'.
v_indx = v_indx + 1.
CLEAR it_idata.
REFRESH it_idata.
CLEAR it_me21-x_data.
REFRESH it_me21-x_data.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
it_me21-bsart
it_me21-bedat
it_me21-ekorg
it_me21-ekgrp.
APPEND it_me21.
ELSEIF it_dummy-dummy+0(01) = 'L'.
SHIFT it_dummy.
SPLIT it_dummy AT v_delimit INTO it_idata-ematn
it_idata-menge
it_idata-netpr
it_idata-werks
it_idata-ebelp.
APPEND it_idata TO it_me21-x_data.
MODIFY it_me21 INDEX v_indx.
ENDIF.
ENDLOOP.
To open the group *
PERFORM open_group.
To populate the bdcdata table for header data *
LOOP AT it_me21.
v_count = v_count + 1.
REFRESH it_bdcdata.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0100',
' ' 'BDC_CURSOR' 'EKKO-LIFNR',
' ' 'BDC_OKCODE' '/00',
' ' 'EKKO-LIFNR' it_me21-lifnr,
' ' 'RM06E-BSART' it_me21-bsart,
' ' 'RM06E-BEDAT' it_me21-bedat,
' ' 'EKKO-EKORG' it_me21-ekorg,
' ' 'EKKO-EKGRP' it_me21-ekgrp,
' ' 'RM06E-LPEIN' 'T'.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
LOOP AT it_me21-x_data INTO x_idata.
CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
v_indx = v_indx + 1.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '/00'.
ENDLOOP.
PERFORM subr_bdc_table USING: 'X' 'SAPMM06E' '0120',
' ' 'BDC_CURSOR' 'RM06E-EBELP',
' ' 'BDC_OKCODE' '=BU'.
PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
End of selection event *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
WRITE :/10 text-001. "Sucess records
WRITE :/10 SY-ULINE(20).
SKIP.
IF it_sucess IS INITIAL.
WRITE :/ text-002.
ELSE.
WRITE :/ text-008, "Total number of Succesful records
35 v_ns.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_sucess.
WRITE:/4 it_sucess-lifnr,
17 it_sucess-tabix CENTERED,
30 it_sucess-sucess_rec.
ENDLOOP.
SKIP.
*-----To display the erroneous records
WRITE:/10 text-006. "Error Records
WRITE:/10 SY-ULINE(17).
SKIP.
IF it_error IS INITIAL.
WRITE:/ text-007. "No error records
ELSE.
WRITE:/ text-009, "Total number of erroneous records
35 v_ne.
SKIP.
WRITE:/ text-003, "Vendor Number
17 text-004, "Record number
30 text-005. "Message
ENDIF.
LOOP AT it_error.
WRITE:/4 it_error-lifnr,
17 it_error-tabix CENTERED,
30 it_error-error_rec.
ENDLOOP.
REFRESH it_sucess.
REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include ZMM_INCL_PURCHASEORDERKB01
DATA: it_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
sucess_rec(125),
END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
msgtyp(1) TYPE c,
lifnr LIKE ekko-lifnr,
tabix LIKE sy-tabix,
error_rec(125),
END OF it_error.
Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu. "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12). "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12). "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX. "' ' = delete session if finished
"'X' = keep session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
GROUP = SPACE. "OR USER = SPACE.
MESSAGE E613(MS).
ENDIF.
create batchinput session *
FORM OPEN_GROUP.
IF SESSION = 'X'.
SKIP.
WRITE: /(20) 'Create group'(I01), GROUP.
SKIP.
*----open batchinput group
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = GROUP
USER = sy-uname.
WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
(12) 'returncode:'(I05),
SY-SUBRC.
ENDIF.
ENDFORM. "OPEN_GROUP
end batchinput session *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
(12) 'returncode:'(I05),
SY-SUBRC.
ELSE.
IF E_GROUP_OPENED = 'X'.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: /.
WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
ENDIF.
ENDIF.
ENDFORM. "CLOSE_GROUP
Start new transaction according to parameters *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
WRITE: / 'BDC_INSERT'(I03),
TCODE,
'returncode:'(I05),
SY-SUBRC,
'RECORD:',
SY-INDEX.
ELSE.
REFRESH it_MESSTAB.
CALL TRANSACTION TCODE USING it_BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO it_MESSTAB.
L_SUBRC = SY-SUBRC.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
ENDIF.
Message handling for Call Transaction *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
IF E_GROUP_OPENED = ' '.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = E_GROUP
USER = sy-uname
KEEP = E_KEEP.
E_GROUP_OPENED = 'X'.
ENDIF.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE
TABLES
DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM. "BDC_TRANSACTION
Form subr_bdc_table *
text
-->P_0220 text *
-->P_0221 text *
-->P_0222 text *
FORM subr_bdc_table USING VALUE(P_0220) TYPE ANY
VALUE(P_0221) TYPE ANY
VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
CLEAR it_bdcdata.
it_bdcdata-fnam = P_0221.
it_bdcdata-fval = P_0222.
APPEND it_bdcdata.
ELSE.
it_bdcdata-dynbegin = P_0220.
it_bdcdata-program = P_0221.
it_bdcdata-dynpro = P_0222.
APPEND it_bdcdata.
ENDIF.
ENDFORM. " subr_bdc_table
Form subr_mess_hand *
text *
-->P_G_MESS text *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = it_messtab-msgid
LANG = it_messtab-msgspra
NO = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
MSG = P_G_MESS
EXCEPTIONS
OTHERS = 0.
CASE it_messtab-msgtyp.
when 'E'.
it_error-error_rec = P_G_MESS.
it_error-lifnr = it_me21-lifnr.
it_error-tabix = v_count.
APPEND IT_ERROR.
when 'S'.
it_sucess-sucess_rec = P_G_MESS.
it_sucess-lifnr = it_me21-lifnr.
it_sucess-tabix = v_count.
APPEND IT_SUCESS.
endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM. " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b> -
Can I use CC on my desktop and laptop with an individual membership?
Can I use CC on my desktop and laptop with an individual membership?
Hi arskhach ,
Welcome to Adobe Forums.
Yes, you can install and activate Creative Cloud desktop applications on two computers (desktop / laptop) , regardless of operating system.
Please reply for any assistance.
Thanks -
I did the recent update on my ipad 7.0.4 and now it keeps freezing up and can not use it. Tried reboot and works for a second then freezes right up again. Anyone else have this issue or know a fix?
Madmonkey,
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
Gaylefromnewhope,
Seems like you tried this all ready and it didn't help.
Next might be to reset all settings.
Settings > General > Reset > Reset all Settings
Note that when you do this you will not lose data but you will have to enter all passwords again.
If that doesn't help you might tries a restore of your iPad using iTunes on the computer you normall sync with. Do a backup and save all data first. Or
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. -
How can I get Indesign CS6 to open JPG/PNG files?
I recently purchased Indesign CS6. When I went to import a PNG, it failed to recognize it. I then tried a JPG to no avail. The exact error message reads as follows:
"Cannot open the file "photo.png". Adobe Indesign May not support the file format, a plug-in that supports the file format may be missing, or the file may be in another application."
How could the plug-ins be missing? Wouldn't these be installed with Indesign? Any advice as to how to proceed?.
Thanks in advance.You need to use the file>place command.
This is very, very basic and I'd respectfully suggest that you take a step back and learn a bit about the program. This link will get you a free one week trial of Lynda.com where you'll find some fabulous video training: http://bit.ly/RS0GXs
Bob -
Can I use InDesign Ver 3.0 and the PM plug in pack with Vista?
I am a long time Pagemaker user and am still using PM6.5 I needed a new computer and of course, it is the Vista OS. I have an original version of InDesign CS (Ver 3.0) with the Pagemaker plug in pack. I never learned to use it cause I was so used to 6.5. Anyway, I installed the InDesign on my new Vista computer but it won't install the PageMaker plug in pack. Says that the OS doesn't support the installation. Can anybody tell me if there is a fix for this or how I can get this to work. InDesign seems to hard and I have thousands of old PM6.5 files I need to use. Thanks!
OK well im using vista 64 bit ...and everything the so called community experts say means i should not be able to install this Adobe indesigne CS Page Maker edition....and its Page maker Plug-In pack
But I did with little complication.
..... installed the Adobe indesigne CS
.....it says you must install the Page maker Plug-In pack
.....so i started the plugin cd said this operating system is not supported
"work around below"
so i did explore cd and went into the Adobe Page maker Plug-In pack Directory on the CD
and i right Click Setup
Select properties
now select second tab at tob COMPATIBILITY
check run this program in compatibility mode for:
then make sure drop down says Windows XP SP2
then hit ok
then and i right Click Setup And select run as adminstrator
hit allow if it prompts you and go thru the normal setup like you would with XP had no issues here works great........
Hope this helps : )
ps doing same for most xp programs makes them run like they are in XP -
Just installed trial version of InDesign CS6. It never completes initialization. Help!
We need system specs and install logs
Mylenium -
Can iDVD 09 open and work with an iDVD project i made in 06?
I am bringing over my iMovie 06 and iDVD projects over to new mac with iDVD 09. I took out iMovie 09 and resinstalled 06HD. The iMovie 06 files now open ok, but not the iDVD 06 projects, when I try to open them with iDVD 09. Should I remove iDVD 09 and install iDVD 06.
I heard that iMovie 06 files will import ok into iDVD 09, but now assuming that the iDVD 06 projects themselves will not open in the newer program.i uninstalled iDVD 09 and installed iDVD 06 to see if I could open the G4's old iDVD projects.
Error message says iDVD 06 will not work with this OS. What gives? Apparently iMovie HD06 will work, as far as I can tell, with just a few tests.
What CAN I DO HERE to bring over my iDVD 06 projects so I can work them on Snow Leopard?
Luckily the dvd projects are not many and not complex. But there are so many issues with all of this. I might as well have a computer that knows only Chinese characters. I got the new mac so my video work wouldnt clog up on the old G4. But this is beyond clog. This is cement, stuck at the starting gate. -
Can I use my apple wireless mouse and keyboard with my Mac Mini and Windows PC?
Hello, I recently dug up a windows PC computer for side projects, and I was able to get by using my wireless apple keyboard and mouse for my Mac mini, and then using a usb mouse for my PC, I want to eliminate the usb keyboard and mouse and just use the bluetooth keyboard. Both computers are usually on all the time, and the windows PC uses a bluetooth adapter. I can get my keyboard and mouse to work on both, but I have to sync them to whatever system I would like everytime I want to use it. Is there any solution that when I choose the Mac Mini my keyboard and mouse will work for the Mac mini, and when I choose my windows pc, the keyboard will only be used on windows without having to resync?
To my knowledge, no.
Barry -
Can I use my iPad in France and Italy with the proper adapter?
I'm going to Europe in five months and trying to prepare. Can I use my iPad there with the proper adapter? I know my iPhone needs the proper SIM card so I'm curious about my iPad.
Yes. You need a wall plug adater for the countries you will be travelling to.
Post iPad 2 iPads work worldwide. Read the specifications.
http://www.apple.com/ipad/specs/
http://www.apple.com/ipad/LTE/ -
Procedure failed while using bulk collect into clause and works with cursor
hi all,
I am using "BULK collect into" clause in my procedure and it is failing after 21 minutes and gives the error "end of file communication channel".
after this error comes when i tried to connect database it is giving following error.
ORA -01034 - Oracle not available.
ORA- 27101 - shared memory realm does not exist.
svr4- error :2 : No such file or directory.
when i use cursor instead of BULK COLLECT INTO clause it is running successful.
Following code is working with cursor.
procedure work_kiosk_full(an_jobid in number ,ac_sqlcode out varchar2 ,ac_sqlerrm out varchar2) is
ld_curr_time Date;
cursor cur_work_kiosk is
select distinct jt.jt_id AS jt_id,
NVL ((ROUND ((jt_date_completed - jt_date_requested) * 24, 2)
0
) AS actual_hrs_to_complete,
NVL ((ROUND ((jt_date_responded - jt_date_requested) * 24, 2)
0
) AS actual_hrs_to_respond,
peo1.peo_name AS agent_name,
peo1.peo_user_name AS asagent_soe_id,
le.lglent_desc AS ap_system,
' ' AS assign_work_request_comment,
DECODE (jt.jt_bill_id,
138802, 'CLIENT BILLABLE',
138803, 'CONTRACTED',
138804, 'INTERNAL BILLABLE',
NULL, ' '
) AS billable,
bl.bldg_name_cc AS building, bl.bldg_id_ls AS building_id,
DECODE (bl.bldg_active_cc,
'Y', 'ACTIVE',
'INACTIVE'
) AS building_status,
DECODE (jt.jt_wrk_cause_id,
141521, 'STANDARD WEAR AND TEAR',
141522, 'NEGLIGENCE',
141523, 'ACCIDENTAL',
141524, 'MECHANICAL MALFUNCTION',
141525, 'OVERSIGHT',
141526, 'VANDAL',
141527, 'STANDARD',
141528, 'PROJECT WORK',
6058229, 'TEST',
NULL, ' '
) AS cause_type,
' ' AS comments, peo3.peo_name AS completed_by,
jt.jt_requestor_email AS contact_email,
jt.jt_requestor_name_first
|| ' '
|| jt.jt_requestor_name_last AS contact_name,
jt.jt_requestor_phone AS contact_phone,
cc.cstctrcd_apcode AS corp_code,
cc.cstctrcd_code AS cost_center,
jt.jt_date_closed AS date_closed,
jt.jt_date_completed AS date_completed,
jt.jt_date_requested AS date_requested,
jt.jt_date_responded AS date_responded,
jt.jt_date_response_ecd AS date_response_ecd,
jt.jt_date_scheduled AS date_scheduled,
DECODE (jt.jt_def_id,
139949, 'WTG VENDOR RESPONSE',
139950, 'WAITING ON PARTS',
139951, 'LABOR AVAILABILITY',
139952, 'DEFERRED- HI PRI WORK',
139953, 'WTG APPROVAL',
139954, 'FUNDING REQUIRED',
139955, 'ACCESS DENIED',
139956, 'WTG MATERIAL',
NULL, ' '
) AS deferral_reason,
jt.jt_description AS description,
jt.jt_date_resched_ecd AS ecd,
fmg.facility_manager AS facility_manager,
fl.floors_text AS FLOOR, gl.genled_desc AS general_ledger,
' ' AS kiosk_date_requested, ' ' AS kiosk_dispatch_confirmed,
' ' AS kiosk_dispatched,
eqp.equip_customer_code AS linked_equipment_alias,
eqp.equip_id AS linked_equipment_id,
eqp.equip_text AS linked_equipment_name,
DECODE (jt_originator_type_id,
1000, 'PROJECT MOVE REQUEST',
138834, 'CUSTOMER INITIATED CORRECTION',
138835, 'CUSTOMER INITIATED REQUEST',
138836, 'CORRECTIVE MAINTENANCE',
138837, 'CONFERENCE ROOM BOOKING',
138838, 'PROJECT INITIATED REQUEST',
138839, 'PLANNED PREVENTIVE MAINTENANCE',
138840, 'SELF INITATED REQUEST',
NULL, ' '
) AS originator_type,
' ' AS payment_terms, priority_text AS priority_code,
swoty.sworktype_text AS problem_type,
prop.property_name_cc AS property,
jt.jt_cost_quote_total AS quote_total,
par.levels_name AS region,
DECODE (jt.jt_repdef_id,
141534, 'ADJUSTED SETTING',
141535, 'TRAINING FOR END',
141536, 'NEW REQUEST',
141537, 'NO REPAIR REQUIR',
141538, 'REPLACED PARTS',
141539, 'REPLACE EQUIPMEN',
1000699, 'NEW REQUEST',
NULL, ' '
) AS repair_definitions,
jt.jt_repairdesc AS repair_description,
jt.jt_requestor AS requestor, ' ' AS requestor_cost_center,
jt.jt_requestor_email AS requestor_email,
jt.jt_requestor_name_first AS requestor_name,
jt.jt_requestor_phone AS requestor_phone,
' ' AS response_time, rm.room_name_cc AS room,
p1.peo_provider_code1 AS service_provider,
p1.peo_address_1 AS service_provider_address,
peocity.city_text service_provider_city,
p1.peo_provider_code1 AS service_provider_code,
peocity.city_country_name AS service_provider_country,
peocur.currency_text AS service_provider_currency,
p1.peo_name AS service_provider_description,
p1.peo_dispatch_method AS serv_prov_dispatc_hmethod,
p1.peo_rate_double AS serv_prov_double_time_rate,
p1.peo_email AS service_provider_email,
p1.peo_emergency_phone AS serv_prov_emergency_phone,
p1.peo_fax AS service_provider_fax_number,
p1.peo_home_phone AS service_provider_home_phone,
p1.peo_rate_hourly AS service_provider_hourly_rate,
p1.peo_title AS service_provider_job_title,
p1.peo_method_id AS service_provider_method,
p1.peo_cell_phone AS service_provider_mobile_phone,
p1.peo_pager AS service_provider_pager,
p1.peo_rate_differential AS service_provider_rates,
p1.peo_rate_differential AS ser_prov_shift_differential,
peocity.city_state_prov_text AS serv_prov_state_province,
DECODE (p1.peo_active,
'Y', 'ACTIVE',
'INACTIVE'
) AS service_provider_status,
p1.peo_url AS serv_prov_web_site_address,
p1.peo_phone AS service_provider_work_phone,
p1.peo_postal_code AS serv_prov_zip_postal_code, ' ' AS shift,
' ' AS skill,
DECODE (jt.jt_bigstatus_id,
138813, 'NEW',
138814, 'PENDING',
138815, 'OPEN',
138816, 'COMPLETED',
138817, 'CLOSED',
138818, 'CANCELLED',
NULL, ' '
) AS status,
lev.levels_name AS subregion, ' ' AS trade,
p1.peo_ls_interface_code1 AS vendor_id,
p1.peo_fax AS vendor_purchasing_fax,
p1.peo_vendor_site_code AS vendor_sitecode,
jt.jt_id AS vendor_ticket, p1.peo_name AS vendor_companyname,
jt.jt_requestor_vip AS vip, wo.wo_id AS work_order_no,
jt.jt_id AS work_request,
jt.jt_class_id AS work_request_class,
woty.worktype_text AS work_type, ' ' AS wr_cost,
jt.jt_description AS wr_description,
' ' AS wr_dispatch_method,
DECODE (jt.jt_bigstatus_id,
138813, 'NEW',
138814, 'PENDING',
138815, 'OPEN',
138816, 'COMPLETED',
138817, 'CLOSED',
138818, 'CANCELLED',
NULL, ' '
) AS wr_status,
ctry.country_name AS country
FROM citi.jobticket jt,
citi.property prop,
citi.bldg bl,
citi.bldg_levels bldglvl,
citi.LEVELS lev,
citi.LEVELS par,
(SELECT crstools.stragg (peo_name) facility_manager,
bldgcon_bldg_id
FROM citi.bldg_contacts, citi.people
WHERE bldgcon_peo_id = peo_id
AND bldgcon_contype_id IN (40181, 10142)
GROUP BY bldgcon_bldg_id) fmg,
citi.floors fl,
citi.room rm,
citi.general_ledger gl,
citi.legal_entity le,
citi.cost_center_codes cc,
citi.equipment eqp,
citi.worktype woty,
citi.subworktype swoty,
citi.work_order wo,
citi.jt_workers jtwo,
citi.priority,
citi.country ctry,
citi.people p1,
citi.people peo3,
citi.people peo1,
citi.city peocity,
citi.currency peocur
WHERE jt.jt_bldg_id = bl.bldg_id
AND bl.bldg_id = bldglvl.bldg_levels_bldg_id
AND bldglvl.bldg_levels_levels_id = lev.levels_id
AND lev.levels_parent = par.levels_id(+)
AND prop.property_id = bl.bldg_property_id
AND bl.bldg_active_ls <> 'N'
AND jt.jt_floors_id = fl.floors_id(+)
AND jt.jt_room_id = rm.room_id(+)
AND jt.jt_bldg_id = fmg.bldgcon_bldg_id(+)
AND jt.jt_genled_id = gl.genled_id(+)
AND gl.genled_lglent_id = le.lglent_id(+)
AND jt.jt_cstctrcd_id = cc.cstctrcd_id(+)
AND jt.jt_equip_id = eqp.equip_id(+)
AND jt.jt_id = jtwo.jtw_jt_id(+)
AND jt.jt_worktype_id = woty.worktype_id(+)
AND jt.jt_sworktype_id = swoty.sworktype_id(+)
AND jt.jt_wo_id = wo.wo_id
AND jt.jt_priority_id = priority_id(+)
--AND jt.jt_date_requested >= ADD_MONTHS (SYSDATE, -12)
AND jt.jt_last_update >= ADD_MONTHS (ld_curr_time, -12)
AND bl.bldg_country_id = ctry.country_id
AND jtwo.jtw_peo_id = p1.peo_id(+)
AND p1.peo_city_id = peocity.city_id(+)
AND jt.jt_completed_by_peo_id = peo3.peo_id(+)
AND p1.peo_rate_currency_id = peocur.currency_id(+)
AND jt.jt_agent_peo_id = peo1.peo_id(+);
BEGIN
execute immediate 'truncate table crstools.drt_bom_work_kiosk';
select sysdate into ld_curr_time from dual;
FOR cur_rec in cur_work_kiosk LOOP
IF MOD(cur_work_kiosk%rowcount,10000 ) = 0 then
COMMIT;
END IF;
INSERT INTO crstools.drt_bom_work_kiosk
( JT_ID
,ACTUAL_HRS_TO_COMPLETE
,ACTUAL_HRS_TO_RESPOND
,AGENT_NAME
,ASAGENT_SOE_ID
,AP_SYSTEM
,ASSIGN_WORK_REQUEST_COMMENT
,BILLABLE
,BUILDING
,BUILDING_ID
,BUILDING_STATUS
,CAUSE_TYPE
,COMMENTS
,COMPLETED_BY
,CONTACT_EMAIL
,CONTACT_NAME
,CONTACT_PHONE
,CORP_CODE
,COST_CENTER
,DATE_CLOSED
,DATE_COMPLETED
,DATE_REQUESTED
,DATE_RESPONDED
,DATE_RESPONSE_ECD
,DATE_SCHEDULED
,DEFERRAL_REASON
,DESCRIPTION
,ECD
,FACILITY_MANAGER
,FLOOR
,GENERAL_LEDGER
,KIOSK_DATE_REQUESTED
,KIOSK_DISPATCH_CONFIRMED
,KIOSK_DISPATCHED
,LINKED_EQUIPMENT_ALIAS
,LINKED_EQUIPMENT_ID
,LINKED_EQUIPMENT_NAME
,ORIGINATOR_TYPE
,PAYMENT_TERMS
,PRIORITY_CODE
,PROBLEM_TYPE
,PROPERTY
,QUOTE_TOTAL
,REGION
,REPAIR_DEFINITIONS
,REPAIR_DESCRIPTION
,REQUESTOR
,REQUESTOR_COST_CENTER
,REQUESTOR_EMAIL
,REQUESTOR_NAME
,REQUESTOR_PHONE
,RESPONSE_TIME
,ROOM
,SERVICE_PROVIDER
,SERVICE_PROVIDER_ADDRESS
,SERVICE_PROVIDER_CITY
,SERVICE_PROVIDER_CODE
,SERVICE_PROVIDER_COUNTRY
,SERVICE_PROVIDER_CURRENCY
,SERVICE_PROVIDER_DESCRIPTION
,SERV_PROV_DISPATC_HMETHOD
,SERV_PROV_DOUBLE_TIME_RATE
,SERVICE_PROVIDER_EMAIL
,SERV_PROV_EMERGENCY_PHONE
,SERVICE_PROVIDER_FAX_NUMBER
,SERVICE_PROVIDER_HOME_PHONE
,SERVICE_PROVIDER_HOURLY_RATE
,SERVICE_PROVIDER_JOB_TITLE
,SERVICE_PROVIDER_METHOD
,SERVICE_PROVIDER_MOBILE_PHONE
,SERVICE_PROVIDER_PAGER
,SERVICE_PROVIDER_RATES
,SER_PROV_SHIFT_DIFFERENTIAL
,SERV_PROV_STATE_PROVINCE
,SERVICE_PROVIDER_STATUS
,SERV_PROV_WEB_SITE_ADDRESS
,SERVICE_PROVIDER_WORK_PHONE
,SERV_PROV_ZIP_POSTAL_CODE
,SHIFT
,SKILL
,STATUS
,SUBREGION
,TRADE
,VENDOR_ID
,VENDOR_PURCHASING_FAX
,VENDOR_SITECODE
,VENDOR_TICKET
,VENDOR_COMPANYNAME
,VIP
,WORK_ORDER_NO
,WORK_REQUEST
,WORK_REQUEST_CLASS
,WORK_TYPE
,WR_COST
,WR_DESCRIPTION
,WR_DISPATCH_METHOD
,WR_STATUS
,COUNTRY
,CREATE_DATE
VALUES
(cur_rec.jt_id
,cur_rec.ACTUAL_HRS_TO_COMPLETE
,cur_rec.ACTUAL_HRS_TO_RESPOND
,cur_rec.AGENT_NAME
,cur_rec.ASAGENT_SOE_ID
,cur_rec.AP_SYSTEM
,cur_rec.ASSIGN_WORK_REQUEST_COMMENT
,cur_rec.BILLABLE
,cur_rec.BUILDING
,cur_rec.BUILDING_ID
,cur_rec.BUILDING_STATUS
,cur_rec.CAUSE_TYPE
,cur_rec.COMMENTS
,cur_rec.COMPLETED_BY
,cur_rec.CONTACT_EMAIL
,cur_rec.CONTACT_NAME
,cur_rec.CONTACT_PHONE
,cur_rec.CORP_CODE
,cur_rec.COST_CENTER
,cur_rec.DATE_CLOSED
,cur_rec.DATE_COMPLETED
,cur_rec.DATE_REQUESTED
,cur_rec.DATE_RESPONDED
,cur_rec.DATE_RESPONSE_ECD
,cur_rec.DATE_SCHEDULED
,cur_rec.DEFERRAL_REASON
,cur_rec.DESCRIPTION
,cur_rec.ECD
,cur_rec.FACILITY_MANAGER
,cur_rec.FLOOR
,cur_rec.GENERAL_LEDGER
,cur_rec.KIOSK_DATE_REQUESTED
,cur_rec.KIOSK_DISPATCH_CONFIRMED
,cur_rec.KIOSK_DISPATCHED
,cur_rec.LINKED_EQUIPMENT_ALIAS
,cur_rec.LINKED_EQUIPMENT_ID
,cur_rec.LINKED_EQUIPMENT_NAME
,cur_rec.ORIGINATOR_TYPE
,cur_rec.PAYMENT_TERMS
,cur_rec.PRIORITY_CODE
,cur_rec.PROBLEM_TYPE
,cur_rec.PROPERTY
,cur_rec.QUOTE_TOTAL
,cur_rec.REGION
,cur_rec.REPAIR_DEFINITIONS
,cur_rec.REPAIR_DESCRIPTION
,cur_rec.REQUESTOR
,cur_rec.REQUESTOR_COST_CENTER
,cur_rec.REQUESTOR_EMAIL
,cur_rec.REQUESTOR_NAME
,cur_rec.REQUESTOR_PHONE
,cur_rec.RESPONSE_TIME
,cur_rec.ROOM
,cur_rec.SERVICE_PROVIDER
,cur_rec.SERVICE_PROVIDER_ADDRESS
,cur_rec.SERVICE_PROVIDER_CITY
,cur_rec.SERVICE_PROVIDER_CODE
,cur_rec.SERVICE_PROVIDER_COUNTRY
,cur_rec.SERVICE_PROVIDER_CURRENCY
,cur_rec.SERVICE_PROVIDER_DESCRIPTION
,cur_rec.SERV_PROV_DISPATC_HMETHOD
,cur_rec.SERV_PROV_DOUBLE_TIME_RATE
,cur_rec.SERVICE_PROVIDER_EMAIL
,cur_rec.SERV_PROV_EMERGENCY_PHONE
,cur_rec.SERVICE_PROVIDER_FAX_NUMBER
,cur_rec.SERVICE_PROVIDER_HOME_PHONE
,cur_rec.SERVICE_PROVIDER_HOURLY_RATE
,cur_rec.SERVICE_PROVIDER_JOB_TITLE
,cur_rec.SERVICE_PROVIDER_METHOD
,cur_rec.SERVICE_PROVIDER_MOBILE_PHONE
,cur_rec.SERVICE_PROVIDER_PAGER
,cur_rec.SERVICE_PROVIDER_RATES
,cur_rec.SER_PROV_SHIFT_DIFFERENTIAL
,cur_rec.SERV_PROV_STATE_PROVINCE
,cur_rec.SERVICE_PROVIDER_STATUS
,cur_rec.SERV_PROV_WEB_SITE_ADDRESS
,cur_rec.SERVICE_PROVIDER_WORK_PHONE
,cur_rec.SERV_PROV_ZIP_POSTAL_CODE
,cur_rec.SHIFT
,cur_rec.SKILL
,cur_rec.STATUS
,cur_rec.SUBREGION
,cur_rec.TRADE
,cur_rec.VENDOR_ID
,cur_rec.VENDOR_PURCHASING_FAX
,cur_rec.VENDOR_SITECODE
,cur_rec.VENDOR_TICKET
,cur_rec.VENDOR_COMPANYNAME
,cur_rec.VIP
,cur_rec.WORK_ORDER_NO
,cur_rec.WORK_REQUEST
,cur_rec.WORK_REQUEST_CLASS
,cur_rec.WORK_TYPE
,cur_rec.WR_COST
,cur_rec.WR_DESCRIPTION
,cur_rec.WR_DISPATCH_METHOD
,cur_rec.WR_STATUS
,cur_rec.COUNTRY
,ld_curr_time
END LOOP;
COMMIT;
exception
when others then
rollback;
dbms_output.put_line('SQLCODE :'||sqlcode ||' Error :'||sqlerrm);
end work_kiosk_full;
Note : total record inserted 849000.
The same code does not work with bulk collect into caluse.
Please help me out why this is happening.
Thanks & regards
shyam~Shyam,
I agree with Billy.
Why are you not using an INSERT..SELECT ?
Also, what are you trying to achieve by
- incremental commits?
- copying data from one table to another (using expensive I/O)?
- using dynamic DML?
Most of these approaches are typically wrong - and not recommended for scalable and performant Oracle applications.I could see you using a CURSOR FOR LOOP if you were changing the data being inserted in such a way that you couldn't encapsulate the changes in a query, but you are doing a straight insert into the table from your Cursor. A much more efficient way would be to use the following modifications I made to your code example:
PROCEDURE WORK_KIOSK_FULL(AN_JOBID IN NUMBER,
AC_SQLCODE OUT VARCHAR2,
AC_SQLERRM OUT VARCHAR2) IS
BEGIN
EXECUTE IMMEDIATE 'truncate table crstools.drt_bom_work_kiosk';
/* Note: The APPEND hint forces a Direct Path INSERT (see Link below code sample) and is combined with the NOLOGGING Hint */
/* To dramtically increase performance. The Direct Path INSERT inserts records above the High-Water Mark on the table. */
INSERT /*+ APPEND NOLOGGING */ INTO CRSTOOLS.DRT_BOM_WORK_KIOSK
(JT_ID
,ACTUAL_HRS_TO_COMPLETE
,ACTUAL_HRS_TO_RESPOND
,AGENT_NAME
,ASAGENT_SOE_ID
,AP_SYSTEM
-- ,ASSIGN_WORK_REQUEST_COMMENT /* I commented out this COLUMN because it doesn't make sense to me to insert */
,BILLABLE /* a couple of space characters into a table. If the intent is to leave the column NULL */
,BUILDING /* don't include it in your INSERT statement and it will be NULL. If there is a valid reason */
,BUILDING_ID /* for inserting the spaces, then remove the "line comments" from the insert and select statments */
,BUILDING_STATUS
,CAUSE_TYPE
-- ,COMMENTS
,COMPLETED_BY
,CONTACT_EMAIL
,CONTACT_NAME
,CONTACT_PHONE
,CORP_CODE
,COST_CENTER
,DATE_CLOSED
,DATE_COMPLETED
,DATE_REQUESTED
,DATE_RESPONDED
,DATE_RESPONSE_ECD
,DATE_SCHEDULED
,DEFERRAL_REASON
,DESCRIPTION
,ECD
,FACILITY_MANAGER
,FLOOR
,GENERAL_LEDGER
-- ,KIOSK_DATE_REQUESTED
-- ,KIOSK_DISPATCH_CONFIRMED
-- ,KIOSK_DISPATCHED
,LINKED_EQUIPMENT_ALIAS
,LINKED_EQUIPMENT_ID
,LINKED_EQUIPMENT_NAME
,ORIGINATOR_TYPE
-- ,PAYMENT_TERMS
,PRIORITY_CODE
,PROBLEM_TYPE
,PROPERTY
,QUOTE_TOTAL
,REGION
,REPAIR_DEFINITIONS
,REPAIR_DESCRIPTION
,REQUESTOR
-- ,REQUESTOR_COST_CENTER
,REQUESTOR_EMAIL
,REQUESTOR_NAME
,REQUESTOR_PHONE
-- ,RESPONSE_TIME
,ROOM
,SERVICE_PROVIDER
,SERVICE_PROVIDER_ADDRESS
,SERVICE_PROVIDER_CITY
,SERVICE_PROVIDER_CODE
,SERVICE_PROVIDER_COUNTRY
,SERVICE_PROVIDER_CURRENCY
,SERVICE_PROVIDER_DESCRIPTION
,SERV_PROV_DISPATC_HMETHOD
,SERV_PROV_DOUBLE_TIME_RATE
,SERVICE_PROVIDER_EMAIL
,SERV_PROV_EMERGENCY_PHONE
,SERVICE_PROVIDER_FAX_NUMBER
,SERVICE_PROVIDER_HOME_PHONE
,SERVICE_PROVIDER_HOURLY_RATE
,SERVICE_PROVIDER_JOB_TITLE
,SERVICE_PROVIDER_METHOD
,SERVICE_PROVIDER_MOBILE_PHONE
,SERVICE_PROVIDER_PAGER
,SERVICE_PROVIDER_RATES
,SER_PROV_SHIFT_DIFFERENTIAL
,SERV_PROV_STATE_PROVINCE
,SERVICE_PROVIDER_STATUS
,SERV_PROV_WEB_SITE_ADDRESS
,SERVICE_PROVIDER_WORK_PHONE
,SERV_PROV_ZIP_POSTAL_CODE
-- ,SHIFT
-- ,SKILL
,STATUS
,SUBREGION
-- ,TRADE
,VENDOR_ID
,VENDOR_PURCHASING_FAX
,VENDOR_SITECODE
,VENDOR_TICKET
,VENDOR_COMPANYNAME
,VIP
,WORK_ORDER_NO
,WORK_REQUEST
,WORK_REQUEST_CLASS
,WORK_TYPE
-- ,WR_COST
,WR_DESCRIPTION
-- ,WR_DISPATCH_METHOD
,WR_STATUS
,COUNTRY
,CREATE_DATE
VALUES
(SELECT DISTINCT
JT.JT_ID AS JT_ID
,NVL((ROUND((JT_DATE_COMPLETED - JT_DATE_REQUESTED) * 24,2)),0) AS ACTUAL_HRS_TO_COMPLETE
,NVL((ROUND((JT_DATE_RESPONDED - JT_DATE_REQUESTED) * 24,2)),0) AS ACTUAL_HRS_TO_RESPOND
,PEO1.PEO_NAME AS AGENT_NAME
,PEO1.PEO_USER_NAME AS ASAGENT_SOE_ID
,LE.LGLENT_DESC AS AP_SYSTEM
-- ,' ' AS ASSIGN_WORK_REQUEST_COMMENT
,DECODE(JT.JT_BILL_ID,138802,'CLIENT BILLABLE'
,138803,'CONTRACTED'
,138804,'INTERNAL BILLABLE',NULL,' ') AS BILLABLE
,BL.BLDG_NAME_CC AS BUILDING
,BL.BLDG_ID_LS AS BUILDING_ID
,DECODE(BL.BLDG_ACTIVE_CC, 'Y', 'ACTIVE', 'INACTIVE') AS BUILDING_STATUS
,DECODE(JT.JT_WRK_CAUSE_ID,141521,'STANDARD WEAR AND TEAR'
,141522,'NEGLIGENCE'
,141523,'ACCIDENTAL'
,141524,'MECHANICAL MALFUNCTION'
,141525,'OVERSIGHT'
,141526,'VANDAL'
,141527,'STANDARD'
,141528,'PROJECT WORK'
,6058229,'TEST',NULL,' ') AS CAUSE_TYPE
-- ,' ' AS COMMENTS
,PEO3.PEO_NAME AS COMPLETED_BY
,JT.JT_REQUESTOR_EMAIL AS CONTACT_EMAIL
,JT.JT_REQUESTOR_NAME_FIRST || ' ' ||JT.JT_REQUESTOR_NAME_LAST AS CONTACT_NAME
,JT.JT_REQUESTOR_PHONE AS CONTACT_PHONE
,CC.CSTCTRCD_APCODE AS CORP_CODE
,CC.CSTCTRCD_CODE AS COST_CENTER
,JT.JT_DATE_CLOSED AS DATE_CLOSED
,JT.JT_DATE_COMPLETED AS DATE_COMPLETED
,JT.JT_DATE_REQUESTED AS DATE_REQUESTED
,JT.JT_DATE_RESPONDED AS DATE_RESPONDED
,JT.JT_DATE_RESPONSE_ECD AS DATE_RESPONSE_ECD
,JT.JT_DATE_SCHEDULED AS DATE_SCHEDULED
,DECODE(JT.JT_DEF_ID,139949,'WTG VENDOR RESPONSE'
,139950,'WAITING ON PARTS'
,139951,'LABOR AVAILABILITY'
,139952,'DEFERRED- HI PRI WORK'
,139953,'WTG APPROVAL'
,139954,'FUNDING REQUIRED'
,139955,'ACCESS DENIED'
,139956,'WTG MATERIAL',NULL,' ') AS DEFERRAL_REASON
,JT.JT_DESCRIPTION AS DESCRIPTION
,JT.JT_DATE_RESCHED_ECD AS ECD
,FMG.FACILITY_MANAGER AS FACILITY_MANAGER
,FL.FLOORS_TEXT AS FLOOR
,GL.GENLED_DESC AS GENERAL_LEDGER
-- ,' ' AS KIOSK_DATE_REQUESTED
-- ,' ' AS KIOSK_DISPATCH_CONFIRMED
-- ,' ' AS KIOSK_DISPATCHED
,EQP.EQUIP_CUSTOMER_CODE AS LINKED_EQUIPMENT_ALIAS
,EQP.EQUIP_ID AS LINKED_EQUIPMENT_ID
,EQP.EQUIP_TEXT AS LINKED_EQUIPMENT_NAME
,DECODE(JT_ORIGINATOR_TYPE_ID,1000,'PROJECT MOVE REQUEST'
,138834,'CUSTOMER INITIATED CORRECTION'
,138835,'CUSTOMER INITIATED REQUEST'
,138836,'CORRECTIVE MAINTENANCE'
,138837,'CONFERENCE ROOM BOOKING'
,138838,'PROJECT INITIATED REQUEST'
,138839,'PLANNED PREVENTIVE MAINTENANCE'
,138840,'SELF INITATED REQUEST',NULL,' ') AS ORIGINATOR_TYPE
-- ,' ' AS PAYMENT_TERMS
,PRIORITY_TEXT AS PRIORITY_CODE
,SWOTY.SWORKTYPE_TEXT AS PROBLEM_TYPE
,PROP.PROPERTY_NAME_CC AS PROPERTY
,JT.JT_COST_QUOTE_TOTAL AS QUOTE_TOTAL
,PAR.LEVELS_NAME AS REGION
,DECODE(JT.JT_REPDEF_ID,141534,'ADJUSTED SETTING'
,141535,'TRAINING FOR END'
,141536,'NEW REQUEST'
,141537,'NO REPAIR REQUIR'
,141538,'REPLACED PARTS'
,141539,'REPLACE EQUIPMEN'
,1000699,'NEW REQUEST',NULL,' ') AS REPAIR_DEFINITIONS
,JT.JT_REPAIRDESC AS REPAIR_DESCRIPTION
,JT.JT_REQUESTOR AS REQUESTOR
-- ,' ' AS REQUESTOR_COST_CENTER
,JT.JT_REQUESTOR_EMAIL AS REQUESTOR_EMAIL
,JT.JT_REQUESTOR_NAME_FIRST AS REQUESTOR_NAME
,JT.JT_REQUESTOR_PHONE AS REQUESTOR_PHONE
-- ,' ' AS RESPONSE_TIME
,RM.ROOM_NAME_CC AS ROOM
,P1.PEO_PROVIDER_CODE1 AS SERVICE_PROVIDER
,P1.PEO_ADDRESS_1 AS SERVICE_PROVIDER_ADDRESS
,PEOCITY.CITY_TEXT SERVICE_PROVIDER_CITY
,P1.PEO_PROVIDER_CODE1 AS SERVICE_PROVIDER_CODE
,PEOCITY.CITY_COUNTRY_NAME AS SERVICE_PROVIDER_COUNTRY
,PEOCUR.CURRENCY_TEXT AS SERVICE_PROVIDER_CURRENCY
,P1.PEO_NAME AS SERVICE_PROVIDER_DESCRIPTION
,P1.PEO_DISPATCH_METHOD AS SERV_PROV_DISPATC_HMETHOD
,P1.PEO_RATE_DOUBLE AS SERV_PROV_DOUBLE_TIME_RATE
,P1.PEO_EMAIL AS SERVICE_PROVIDER_EMAIL
,P1.PEO_EMERGENCY_PHONE AS SERV_PROV_EMERGENCY_PHONE
,P1.PEO_FAX AS SERVICE_PROVIDER_FAX_NUMBER
,P1.PEO_HOME_PHONE AS SERVICE_PROVIDER_HOME_PHONE
,P1.PEO_RATE_HOURLY AS SERVICE_PROVIDER_HOURLY_RATE
,P1.PEO_TITLE AS SERVICE_PROVIDER_JOB_TITLE
,P1.PEO_METHOD_ID AS SERVICE_PROVIDER_METHOD
,P1.PEO_CELL_PHONE AS SERVICE_PROVIDER_MOBILE_PHONE
,P1.PEO_PAGER AS SERVICE_PROVIDER_PAGER
,P1.PEO_RATE_DIFFERENTIAL AS SERVICE_PROVIDER_RATES
,P1.PEO_RATE_DIFFERENTIAL AS SER_PROV_SHIFT_DIFFERENTIAL
,PEOCITY.CITY_STATE_PROV_TEXT AS SERV_PROV_STATE_PROVINCE
,DECODE(P1.PEO_ACTIVE, 'Y', 'ACTIVE', 'INACTIVE') AS SERVICE_PROVIDER_STATUS
,P1.PEO_URL AS SERV_PROV_WEB_SITE_ADDRESS
,P1.PEO_PHONE AS SERVICE_PROVIDER_WORK_PHONE
,P1.PEO_POSTAL_CODE AS SERV_PROV_ZIP_POSTAL_CODE
-- ,' ' AS SHIFT
-- ,' ' AS SKILL
,DECODE(JT.JT_BIGSTATUS_ID,138813,'NEW'
,138814,'PENDING'
,138815,'OPEN'
,138816,'COMPLETED'
,138817,'CLOSED'
,138818,'CANCELLED',NULL,' ') AS STATUS
,LEV.LEVELS_NAME AS SUBREGION
-- ,' ' AS TRADE
,P1.PEO_LS_INTERFACE_CODE1 AS VENDOR_ID
,P1.PEO_FAX AS VENDOR_PURCHASING_FAX
,P1.PEO_VENDOR_SITE_CODE AS VENDOR_SITECODE
,JT.JT_ID AS VENDOR_TICKET
,P1.PEO_NAME AS VENDOR_COMPANYNAME
,JT.JT_REQUESTOR_VIP AS VIP
,WO.WO_ID AS WORK_ORDER_NO
,JT.JT_ID AS WORK_REQUEST
,JT.JT_CLASS_ID AS WORK_REQUEST_CLASS
,WOTY.WORKTYPE_TEXT AS WORK_TYPE
-- ,' ' AS WR_COST
,JT.JT_DESCRIPTION AS WR_DESCRIPTION
-- ,' ' AS WR_DISPATCH_METHOD
,DECODE(JT.JT_BIGSTATUS_ID,138813,'NEW'
,138814,'PENDING'
,138815,'OPEN'
,138816,'COMPLETED'
,138817,'CLOSED'
,138818,'CANCELLED',NULL,' ') AS WR_STATUS
,CTRY.COUNTRY_NAME AS COUNTRY
,SYSDATE --LD_CURR_TIME
FROM CITI.JOBTICKET JT,
CITI.PROPERTY PROP,
CITI.BLDG BL,
CITI.BLDG_LEVELS BLDGLVL,
CITI.LEVELS LEV,
CITI.LEVELS PAR,
(SELECT CRSTOOLS.STRAGG(PEO_NAME) FACILITY_MANAGER,
BLDGCON_BLDG_ID
FROM CITI.BLDG_CONTACTS, CITI.PEOPLE
WHERE BLDGCON_PEO_ID = PEO_ID
AND BLDGCON_CONTYPE_ID IN (40181, 10142)
GROUP BY BLDGCON_BLDG_ID) FMG,
CITI.FLOORS FL,
CITI.ROOM RM,
CITI.GENERAL_LEDGER GL,
CITI.LEGAL_ENTITY LE,
CITI.COST_CENTER_CODES CC,
CITI.EQUIPMENT EQP,
CITI.WORKTYPE WOTY,
CITI.SUBWORKTYPE SWOTY,
CITI.WORK_ORDER WO,
CITI.JT_WORKERS JTWO,
CITI.PRIORITY,
CITI.COUNTRY CTRY,
CITI.PEOPLE P1,
CITI.PEOPLE PEO3,
CITI.PEOPLE PEO1,
CITI.CITY PEOCITY,
CITI.CURRENCY PEOCUR
WHERE JT.JT_BLDG_ID = BL.BLDG_ID
AND BL.BLDG_ID = BLDGLVL.BLDG_LEVELS_BLDG_ID
AND BLDGLVL.BLDG_LEVELS_LEVELS_ID = LEV.LEVELS_ID
AND LEV.LEVELS_PARENT = PAR.LEVELS_ID(+)
AND PROP.PROPERTY_ID = BL.BLDG_PROPERTY_ID
AND BL.BLDG_ACTIVE_LS = 'N'
AND JT.JT_FLOORS_ID = FL.FLOORS_ID(+)
AND JT.JT_ROOM_ID = RM.ROOM_ID(+)
AND JT.JT_BLDG_ID = FMG.BLDGCON_BLDG_ID(+)
AND JT.JT_GENLED_ID = GL.GENLED_ID(+)
AND GL.GENLED_LGLENT_ID = LE.LGLENT_ID(+)
AND JT.JT_CSTCTRCD_ID = CC.CSTCTRCD_ID(+)
AND JT.JT_EQUIP_ID = EQP.EQUIP_ID(+)
AND JT.JT_ID = JTWO.JTW_JT_ID(+)
AND JT.JT_WORKTYPE_ID = WOTY.WORKTYPE_ID(+)
AND JT.JT_SWORKTYPE_ID = SWOTY.SWORKTYPE_ID(+)
AND JT.JT_WO_ID = WO.WO_ID
AND JT.JT_PRIORITY_ID = PRIORITY_ID(+)
--AND jt.jt_date_requested >= ADD_MONTHS (SYSDATE, -12)
AND JT.JT_LAST_UPDATE >= ADD_MONTHS(LD_CURR_TIME, -12)
AND BL.BLDG_COUNTRY_ID = CTRY.COUNTRY_ID
AND JTWO.JTW_PEO_ID = P1.PEO_ID(+)
AND P1.PEO_CITY_ID = PEOCITY.CITY_ID(+)
AND JT.JT_COMPLETED_BY_PEO_ID = PEO3.PEO_ID(+)
AND P1.PEO_RATE_CURRENCY_ID = PEOCUR.CURRENCY_ID(+)
AND JT.JT_AGENT_PEO_ID = PEO1.PEO_ID(+)
COMMIT;
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
DBMS_OUTPUT.PUT_LINE('SQLCODE :' || SQLCODE || ' Error :' || SQLERRM);
END WORK_KIOSK_FULL;Here's the link for infor on the [Oracle Direct-Path INSERT |http://download.oracle.com/docs/cd/B10501_01/server.920/a96524/c21dlins.htm#10778].
Also, if you are truly intent on using a CURSOR FOR LOOP with the BULK COLLECT, I suggest you read Steven Feuerstein's article [PL/SQL Practices: On BULK COLLECT |http://www.oracle.com/technology/oramag/oracle/08-mar/o28plsql.html].
Hope this helps.
Craig...
If my response or the response of another was helpful, please mark it accordingly -
Can I use BPEL 10.1.2 to work with Content DB 10.2
Hello Everybody,
I am using Application Server Control 10.1.2 and BPEL PM 10.1.2 and Content DB 10.2.
will there be any difference in steps compare the viewlet provided for the BPEL PM 10.1.3 and Content DB 10.2.
http://www.oracle.com/technology/products/contentdb/dev/viewlet/index.html
any suggestion is really appreciated.
Thanks
KrrishIt should work with 32 bit Outlook 2010
Maybe you are looking for
-
Mail app on OSX crashes when I do something on iPhone mail app
So whenever I have Mail.app open on my mac(which I would do all the time), and I see a new mail on my iphone (same mail.app) and I try to archive, reply, delete or whatever to do, the app on My Mac crashes. Straight after I do ANYTHING on my iphone .
-
How to install SAPGUI for windows, SAPGUI for Java and SAPGUI for HTML in Portal?
-
My pictures are there but i can't see them.
I went on iphoto to put on some picutres from my digital camera and the pics went on the computer fine but as i was editing the pics iphoto began to work really really slow. so i restarted and went back on but it's was still really really slow. now b
-
5.1 appears to have broken the relationship function in contacts
5.1 appears to have broken the relationship function in contacts on the iPhone 4s. You no long have "relationships" as a field to add to the contact. I'm limited to 3 only. Worked in 5.0. Anyone else see this?
-
Make Composite image from layer data instead from merged data section...
I am working on parsing the psd file and saving the data as per doc of photoshop 6. I need to make an image from the layer data alone with different combinations of layers selected, visible etc... and not using the merged data section in the file. Ca