CS6 color lookup tables

Hi community,
I've quickly come to admire the new adjustment layer 'color lookup', but I feel the presets are too few.
Does anybody know where to get more presets? My own research hasn't turned up anything yet.
Thanks!

There are 3DLUTs available on the web, but good ones cost money.
I've been trying to ship more samples - but they take time to fine tune.
And in my copious spare time, I'm trying to figure out how to make a user friendly tool to create them (because no such tool exists right now :-( )

Similar Messages

Using Color Lookup Tables with cwgraph3d

Hi,
When searching old forums and other references, I can only find information regarding using color lookup tables in labview and I am using VB6.
I want to let the user to pick a given amount of colors, have this turned into a gradiant over a table of size 256, and then using the custom colormaptstyle in my 3d graph. I want to be able to change the palette in real time to change my image. Basically I want to have the color palette screen to show up all the time and that gradiant that appears on the right side(vertically) to be my new color lookup table for the image(if that makes any sense).
Thanks. Any help would be greatly appreciated.
Kevin
[email protected]

Hello Kevin,
Attached is a small VB6 example that uses the CWGraph3D's ColorMap properties. I think this will demonstrate the color lookup table capability that you're asking about, and you'll be able to use this as a building block for your own application.
David Mc.
NI Applications Engineer
Attachments:
colormap.zip ‏5 KB

What can you do with Color Lookup Tables (CLUT) and other ranges.?

Ok.... I might be repeating something.... but someone
suggested to post this as it hasn't be answered....
Anyway I'm curious on what you can do with Color Lookup
Tables (CLUT) in Fireworks.... I've been looking for details on
CLUT, but have only found information on what it's all about....
Alright, to the point, I'm kind of having some trouble on
what to do period with them....in the optimize panel in Fireworks I
saved the Palette, of all the colors I wanted (or so it seemed,
idk), and made it so it would be for a PNG 32 file... *is this
suppose to be an .act file too?*.... I then took the image to have
the colors replaced to the ones I saved in the custom color
table... so I tried loading the .act file I had saved, that had the
colors I made for the other image, but nothing happened... so I
tried doing other various types of files..... I tried doing it as a
.gif, and it work.... but the thing is I don't want it to be a
gif... and yes, it is kind of vague, but I really don't know what
to really do....
Is there only certain ways that you can load up CLUT files
into different pictures...?? I want this picture to be a .png file
too, so is there any way to save the color palette, and load them
into these type of files..?? or it can't be done with them..??
overal, I want this image to be .png files... is there any
tutorial or info on this..?? it would be quite helpful...

AarokBomB wrote:
> Is there only certain ways that you can load up CLUT
files into different
> pictures...??
Choose File > Image Preview > Options tab. Set the
format type to PNG 8,
GIF, TIFF 8, or BMP 8. Click on the small button to the right
of the
Format drop down menu to open the tab options menu. Choose
Load Palette
and browse to the .act palette you you have saved. Clock on
OK to accept
the changes and close the dialog box. The imported color
table will be
applied to the image.
Linda Rathgeber [PVII] **Adobe Community Expert-Fireworks**
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

BCG Brightness Contrast Gamma - Looking for BCG function returning color table / lookup table coded in pure G and applicable to Intensity Graph or Picture Control

Looking for BCG function returning color table / lookup table coded in
pure G and applicable to 8-bit Intensity Graph or Picture Control. Do
not want to use IMAQ Vision is this particular application. Any
help is appreciated.
Sincerely,
Don

Take a look at this color model software I put together. (Don't concern yourself much with the basic programming at this point.). The color component generator subVI is borrowed from a LabVIEW example.
First look at test_color2.vi. If you adjust the sliders of the various controls, you will see how it works. You can see that for pure B&W images, brightness, contrast, and gamma (which I think I have coded correctly) are all fairly straightforward to modify.
Now look at test_color3.vi. Here we try to adjust BCG for color images using the color model shown here where current color component clusters are carried into the BCG event cases via shift registers. You can see that once color is introduced into the image, it becomes difficult to mix the colorizing with the BCG model. And this is pretty much where I am right now.
Would be interested in comments / suggestions.
Sincerely,
Don
Attachments:
test_color2.llb ‏2251 KB

Quick Tip - Color Lookup Adjustment Layer in Photoshop CS6 | The Complete Picture with Julieanne Kost | Adobe TV

In this Quick Tip, Julieanne demonstrates the new Color Lookup Adjustment layer and walks you through how to download a template to quickly apply these new “looks” to your images. The files she references can be found here. http://adobe.ly/Ng3afA
http://adobe.ly/LiGadT

Can the Camera Calibration tech. in LR be used to keep IR raw images looking like the jogs on back of camera?

Proper use of a Lookup table and adaptations for NET

Hello,
I need to create a few lookup tables and I often see the following:
create table Languages
Id int identity not null primary key (Id),
Code nvarchar (4) not null,
Description nvarchar (120) not null,
create table Posts
Id int identity not null primary key (Id),
LanguageId int not null,
Title nvarchar (400) not null,
insert into Languages (Id, Code, Description)
values (1, "en", "English");
This way I am localizing Posts with language id ...
IMHO, this is not the best scheme for Languages table because in a Lookup table the PK should be meaningful, right?
So instead I would use the following:
create table Languages
Code nvarchar (4) not null primary key (Code),
Description nvarchar (120) not null,
create table Posts
Id int identity not null primary key (Id),
LanguageCode nvarchar (4) not null,
Title nvarchar (400) not null,
insert into Languages (Code, Description)
values ("en", "English");
The NET applications usually use language code so this way I can get a Post in English without using a Join.
And with this approach I am also maintaining the database data integrity ...
This could be applied to Genders table with codes "M", "F", countries table, transaction types table (should I?), ...
However I think it is common to use int as PK in lookup tables because it is easier to map to ENUMS.
And know it is even possible to map to Flag Enums so have a Many to Many relationship in an ENUM.
That helps in NET code but in fact has limitations. A Languages table could never be mapped to a FLags Enum ...
... An flags enum can't have more than 64 items (Int64) because the keys must be a power of two.
A SOLUTION
I decided to find an approach that enforces database data integrity and still makes possible to use enums so I tried:
create table Languages
Code nvarchar (4) not null primary key (Code),
Key int not null,
Description nvarchar (120) not null,
create table Posts
Id int identity not null primary key (Id),
LanguageCode nvarchar (4) not null,
Title nvarchar (400) not null,
insert into Languages (Code, Key, Description)
values ("en", 1, "English");
With this approach I have a meaningfully Language code, I avoid joins and I can create an enum by parsing the Key:
public enum LanguageEnum {
[Code("en")
English = 1
I can even preserve the code in an attribute. Or I can switch the code and description ...
What about Flag enums? Well, I will have not Flag enums but I can have List<LanguageEnum> ...
And when using List<LanguageEnum> I do not have the limitation of 64 items ...
To me all this makes sense but would I apply it to a Roles table, or a ProductsCategory table?
In my opinion I would apply only to tables that will rarely change over time ... So:
    Languages, Countries, Genders, ... Any other example?
About the following I am not sure (They are intrinsic to the application):
   PaymentsTypes, UserRoles
And to these I wouldn't apply (They can be managed by a CMS):
   ProductsCategories, ProductsColors
What do you think about my approach for Lookup tables?
Thank You,
Miguel

>>IMHO, this is not the best scheme for Languages table because in a Lookup table the PK should be meaningful, right?<<
Not necessarily. The choice to use, or not to use, a surrogate key in a table is a preference, not a rule. There are pros and cons to either method, but I tend to agree with you. When the values are set as programming terms, I usually use a textual value
for the key. But this is nothing to get hung up over.
Bear in mind however, that this:
    create table Languages
      Id int identity not
null primary key
(Id),
      Code nvarchar (4)
not null, Description nvarchar
(120) not
null,
is not equivalent to
    create table Languages
      Code nvarchar (4)
not null primary
key (Code),
      Description nvarchar (120)
not null,
The first table needs a UNIQUE constraint on Code to make these solutions semantically the same. The first table could have the value 'Klingon' in it 20 times while the second only once.
>>However I think it is common to use int as PK in lookup tables because it is easier to map to ENUMS.<<
This was going to be my next point. For that case, I would only change the first table to not have an identity assigned key value, as it would be easier to manage at the same time and manner as the enum.
>>. A Languages table could never be mapped to a FLags Enum ...<<
You could, but I would highly suggest to avoid any values encoded in a bitwise pattern in SQL as much as possible. Rule #1 (First Normal Form) is partially to have 1 value per column. It is how the optimizer thinks, and how it works best.
My rule of thumb for lookup (or I prefer the term "domain" tables, as really all tables are there to look up values :)), is all data should be self explanatory in the database, through data if at all possible. So if you have a color column,
and it contains the color "Vermillion", and all you will ever need is the name, and you feel like it is good enough to manage in the UI, then great. But bear in mind, the beauty of a table that is there for domain purposes, is that you can then store
the R, G, and B attributes of the vermillion color (254, 73, 2 respectively, based on
http://www.colorcombos.com/colors/FE4902) and you can then use that in coding. Alternate names for the color could be introduce, etc. And if UserRoles are 1, 2, 3, and 42 (I have seen worse), then
definitely add columns. I think you are basically on the right track.
Louis
Without good requirements, my advice is only guesses. Please don't hold it against me if my answer answers my interpretation of your questions.

What color space are the Color Lookup presets meant for?

I've noticed that if I convert the same image to multiple color spaces and apply a 3D LUT with the new Color Lookup adjustment, the result is noticeably different. From experimenting, it seems that the lookup tables operate on whatever RGB value is given to them no matter what color space. Is there a certain color space these were optimized for? For instance, would a certain color space give me a more authentic 2-strip look than another because of the space they were sampled in? And if I create my own 3D LUTs, would I have to create a separate one for each color space in order to get a consistent look in all spaces?

So do you know what color space was used to create the presets that are there, such as 2-strip and 3-strip? Even though they don't know about color spaces, the different gammas on the input cause the look to come out different in all colorspaces, so it stands to reason that whatever color space the calculations and/or sampling was done in is closest to what was intended while the others are rough approximations. For things like "warming" it doesn't matter, but for ones that simulate actual films I'm curious to know, especially since the 2-strip ones looks a little different than when you just copy the green channel into the blue and green channels as described on all the websites.

Accessing lookup table from XSL stylesheet

HI Gentlemen,
Given two XMLTYPE tables: a Master and a Lookup. The Lookup table consists merely of {key, value} pairs. I am about to display Master table contents--subtrees selected from one big XMLTYPE column. The display process is governed by an appropriate XSL stylesheet. Master table elements have data only in their attributes. For example: <time U="2"/> which means that the value of the Unit attribute is 2, meaning "Minute" according to the Lookup table.
My question is: Does anybody of you know a fast and safe method to SELECT from the Master AND Lookup (inner join, as in a pure relational environment), thereby REPLACING the key value with its MEANING (textual interpretation). This would be extremely important as numeric codes do not have meaning to the user. User-friendly behavior requires that all important information be displayed at once. (Note that I have nothing against modifying my stylesheet to query the Lookup table as well, if no straightforward master-detail querying technique exists.)
Please give me an idea if you have.
Thank you in advance, kind regards:
Miklos HERBOLY

HI odie,
Here is the stuff you requested. I admit, it is fairly abundant, but you will see the structure and the main points. Some of the elements are multiple-occurrence, hence the XMLTABLE() solution was no good because of the large number of generated rows. The stylesheet would be ideal to display embedded "nested collections".
Please let me know if you have anything for me.
Thanks, regards
Miklos
HERE ARE THE XMLTYPE MASTER TABLE CONTENTS. TABLE IS NON-SCHEMA-BASED.
=====================================================================
SQL> select * from z;
XML_DOCUMENT
<?xml version="1.0" encoding="WINDOWS-1252"?>
<?xml-stylesheet type="text/xsl" href="file://c:/XSL/ziffer.xsl"?>
<ehd:ehd xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="urn:ehd/go/001" xmlns:ehd="urn:ehd/001" ehd_versio
n="1.20">
<ehd:header>
<ehd:id EX="E7F454A3-0F6E-460e-A495-BBBBBBBBBBB3" RT="1.2.276.0.76.3.1.1"/>
<ehd:version_nbr V="1"/>
<ehd:document_type_cd V="851"/>
<ehd:service_tmr V="2006-07-01..2007-12-31"/>
<ehd:origination_dttm V="2006-05-03"/>
<ehd:provider>
<ehd:provider.type_cd V="KV" S="1.2.276.0.76.5.104" SV="1.0"/>
<ehd:person>
<ehd:id EX="3223" RT="2.3.5.3.T.e.s.t" RTV="1.10"/>
<ehd:person_name>
<ehd:nm>
<ehd:GIV V="Hans"/>
<ehd:PFX V="von"/>
<ehd:FAM V="Mustermann"/>
</ehd:nm>
</ehd:person_name>
<ehd:organization.nm V="KV Hessen"/>
<ehd:addr>
<ehd:STR V="Ottostr."/>
<ehd:HNR V="12"/>
<ehd:ZIP V="50859"/>
<ehd:CTY V="Köln"/>
</ehd:addr>
<ehd:telecom V="tel:030-4005-2121 begin_of_the_skype_highlighting 030-4005-2121 end_of_the_skype_highlighting begin_of_the_skype_highlighting 030-4005-2121 end_of_the_skype_highlighting"/>
</ehd:person>
<ehd:organization>
<ehd:id EX="46" RT="1.2.276.0.76.5.233"/>
</ehd:organization>
</ehd:provider>
<ehd:interface>
<ehd:id EX="SDEBM" RT="1.2.276.0.76.5.109" RTV="1.0"/>
<ehd:interface.nm V="Gebührenordnungsstammdatei / Satzart 851"/>
<ehd:version V="01.30"/>
</ehd:interface>
</ehd:header>
<ehd:body>
<gnr_liste>
<gnr V="01700V" USE="46" USE-DOMAIN="1.2.276.0.76.5.233" VT="2006-05-03">
<allgemein>
<gueltigkeit>
<service_tmr V="2006-07-01.."/>
<effective_tmr V="2006-07-01.."/>
</gueltigkeit>
<legende>
<kap_bez V="1.7" DN="Gesundheits- und Früherkennungsuntersuchungen, Mutterschaftsvorsorge, Empfängnisregelun
g und Schwangerschaftsabbruch (vormals Sonstige Hilfen)">
<bereich V="II" DN="Arztgruppenübergreifende allgemeine Leistungen"/>
<kapitel V="1" DN="Allgemeine Leistungen"/>
<abschnitt V="7" DN="Gesundheits- und Früherkennungsuntersuchungen, Mutterschaftsvorsorge, Empfängnisregel
ung und Schwangerschaftsabbruch (vormals Sonstige Hilfen)"/>
</kap_bez>
<kurztext V="Grundpauschale für Fachärzte für Laboratoriumsmedizin u.a."/>
<langtext V="Grundpauschale für Fachärzte für Laboratoriumsmedizin, Mikrobiologie und Infektionsepidemiologi
e, Transfusionsmedizin und ermächtigte Fachwissenschaftler der Medizin für die Erbringung von Laborleistungen gemäß den
Richtlinien des Gemeinsamen Bundesausschusses über die ärztliche Betreuung während der Schwangerschaft und nach der En
tb indung (Mutterschafts-Richtlinien) und/oder der Richtlinien des Gemeinsamen Bundesausschusses zur Empfängnisregelung
und zum Schwangerschaftsabbruch bei Probeneinsendung, "/>
<quittungstext V="Grundpauschale für Fachärzte für Laboratoriumsmedizin u.a."/>
</legende>
<anmerkungen_liste>
<anmerkung V="Die Leistung nach der Nr. 01100 ist nicht berechnungsfähig, wenn Sprechstunden vor 07:00 Uhr o
der nach 19:00 Uhr stattfinden oder Patienten zu diesen Zeiten bestellt werden."/>
<anmerkung V="Im Rahmen der unvorhergesehenen Inanspruchnahme des Vertragsarztes ist die Leistung nach der N
r. 01100 auch dann nur einmal berechnungsfähig, wenn es sich um eine Gruppenbehandlung handelt."/>
<anmerkung V="Die Leistung nach der Nr. 01100 ist ausschließlich bei kurativer Behandlung berechnungsfähig."
/>
</anmerkungen_liste>
<leistungsinhalt>
<komplex V="OBLIGAT">
<leistung V="Persönlicher Arzt-Patienten-Kontakt im organisierten Not(fall)dienst"/>
</komplex>
<komplex V="FAKULTATIV">
<leistung V="Beratung und Behandlung bis zu 10 Minuten Dauer,"/>
<leistung V="2...Beratung und Behandlung bis zu 10 Minuten Dauer,"/>
<leistung V="3...Beratung und Behandlung bis zu 10 Minuten Dauer,"/>
</komplex>
<komplex V="FAKULTATIV">
<leistung V="In Anhang 1 aufgeführte Leistungen,"/>
</komplex>
</leistungsinhalt>
<bewertung_liste>
<bewertung V="5595" U="1" U-DOMAIN="1.2.276.0.76.5.236">
<leistungserbringerart V="1" S="1.2.276.0.76.5.234" SV="1.02"/>
<leistung_typ V="GL"/>
</bewertung>
<bewertung V="2797.5" U="1" U-DOMAIN="1.2.276.0.76.5.236">
<leistungserbringerart V="2" S="1.2.276.0.76.5.234" SV="1.02"/>
<leistung_typ V="GL"/>
</bewertung>
</bewertung_liste>
<zeitbedarf_liste>
<zeit V="21" U="2" U-DOMAIN="1.2.276.0.76.5.238">
<leistung_typ V="AL"/>
</zeit>
</zeitbedarf_liste>
<pruefzeit V="1" U="2" U-DOMAIN="1.2.276.0.76.5.238">
<zeitprofilart V="3" S="1.2.276.0.76.5.228" SV="1.00"/>
</pruefzeit>
<rlv V="0" S="1.2.276.0.76.5.241" SV="1.00"/>
<leistungsgruppe V="10" S="1.2.276.0.76.5.227" SV="1.00"/>
</allgemein>
<bedingung>
<fachgruppe_liste V="true">
<versorgungsbereich V="2" S="1.2.276.0.76.5.237" SV="1.01">
<fachgruppe V="110" S="1.2.276.0.76.5.114" SV="1.00"/>
<fachgruppe V="111" S="1.2.276.0.76.5.114" SV="1.00"/>
<fachgruppe V="112" S="1.2.276.0.76.5.114" SV="1.00"/>
<fachgruppe V="303" S="1.2.276.0.76.5.114" SV="1.00"/>
<fachgruppe V="357" S="1.2.276.0.76.5.114" SV="1.00"/>
<fachgruppe V="501" S="1.2.276.0.76.5.114" SV="1.00"/>
<fachgruppe V="532" S="1.2.276.0.76.5.114" SV="1.00"/>
</versorgungsbereich>
</fachgruppe_liste>
<anzahlbedingung_liste>
<bezugsraum V="1" U="7" U-DOMAIN="1.2.276.0.76.5.226">
<anzahl V="1"/>
</bezugsraum>
</anzahlbedingung_liste>
<abr_best V="je Behandlungsfall mit Auftragsleistung(en) der Abschnitte 1.7.4 und/oder 1.7.5"/>
</bedingung>
<regel>
<ausschluss_liste>
<bezugsraum V="1" U="7" U-DOMAIN="1.2.276.0.76.5.226">
<gnr_liste V="false">
<gnr V="12220" DN="Grundpauschale für Fachärzte für Laboratoriumsmedizin u.a."/>
<gnr V="12225" DN="Grundpauschale für Vertragsärzte aus nicht in der Nr. 12220 aufgeführten Arztgruppen
bei Probeneinsendung"/>
</gnr_liste>
</bezugsraum>
</ausschluss_liste>
</regel>
<kv V="46" S="1.2.276.0.76.5.233" SV="1.01">
<kennzeichen>
<arztpraxis V="1"/>
</kennzeichen>
<kv_bewertung_liste>
<kv_bewertung V="100" U="1" U-DOMAIN="1.2.276.0.76.5.236">
<leistungserbringerart V="2" S="1.2.276.0.76.5.234" SV="1.02"/>
</kv_bewertung>
<kv_bewertung V="150" U="1" U-DOMAIN="1.2.276.0.76.5.236">
<leistungserbringerart V="1" S="1.2.276.0.76.5.234" SV="1.02"/>
</kv_bewertung>
</kv_bewertung_liste>
</kv>
<vdx>
<gkv_kontenart_liste>
<gkv_kontenart V="530" S="1.2.276.0.76.5.258"/>
<gkv_kontenart V="463" S="1.2.276.0.76.5.258"/>
</gkv_kontenart_liste>
</vdx>
</gnr>
</gnr_liste>
</ehd:body>
</ehd:ehd>
1 Zeile wurde ausgewählt.
SQL> spool off
==========================
HERE IS THE XQUERY COMMAND
==========================
<?xml version="1.0" encoding='windows-1252'?>

<page xmlns:xsql="urn:oracle-xsql" connection="gksconnection">
<xsql:query xmlns:xsql="urn:oracle-xsql">
SELECT XMLQuery('xquery version "1.0";
declare namespace n1="urn:ehd/001";
declare namespace n2="urn:ehd/go/001";
let $i := /n1:ehd/n1:body/n2:gnr_liste/n2:gnr
where $i[@n2:V = "01700V"]
return $i'
PASSING xml_document
RETURNING CONTENT)
FROM z
</xsql:query>
</page>
======================
HERE IS THE STYLESHEET - relevant part only
======================
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ehd="urn:ehd/001" xmlns:pe="urn:ehd/go/001">
<xsl:output method="html"/>
<xsl:template match="pe:gnr">
<html>
<head>
<title>EBM Ziffer</title>
<style type="text/css">
table
border-collapse:collapse;
table, td, th
border:1px solid black;
</style>
</head>
<body style="font-family:verdana;color:black">
<h2><xsl:text>Ziffer: </xsl:text>
<xsl:value-of select="@V"/>
</h2>
<table border="1">
<tr>
<td><xsl:text>KV</xsl:text></td>
<td><xsl:value-of select="@USE"/></td>
</tr>
<tr>
<td><xsl:text>Gültigkeit</xsl:text></td>
<td><xsl:value-of select="pe:allgemein/pe:gueltigkeit/pe:service_tmr/@V"/></td>
</tr>
<tr>
<td><xsl:text>Bezeichnung Kapitel</xsl:text></td>
<td><xsl:value-of select="pe:allgemein/pe:legende/pe:kap_bez/@V"/>
<xsl:text> </xsl:text>
<xsl:value-of select="pe:allgemein/pe:legende/pe:kap_bez/@DN"/></td>
</tr>
<tr>
<td><xsl:text>Bereich</xsl:text></td>
<td><xsl:value-of select="pe:allgemein/pe:legende/pe:kap_bez/pe:bereich/@V"/>
<xsl:text> </xsl:text>
<xsl:value-of select="pe:allgemein/pe:legende/pe:kap_bez/pe:bereich/@DN"/></td>
</tr>
<tr>
<td><xsl:text>Kapitel</xsl:text></td>
<td><xsl:value-of select="pe:allgemein/pe:legende/pe:kap_bez/pe:kapitel/@V"/>
<xsl:text> </xsl:text>
<xsl:value-of select="pe:allgemein/pe:legende/pe:kap_bez/pe:kapitel/@DN"/></td>
</tr>
<tr>
<td><xsl:text>Abschnitt</xsl:text></td>
<td><xsl:value-of select="pe:allgemein/pe:legende/pe:kap_bez/pe:abschnitt/@DN"/></td>
</tr>
<tr>
<td><xsl:text>Unterabschnitt</xsl:text></td>
<td><xsl:value-of select="pe:allgemein/pe:legende/pe:kap_bez/pe:uabschnitt/@DN"/></td>
</tr>
<tr>
<td><xsl:text>Block</xsl:text></td>
<td><xsl:value-of select="pe:allgemein/pe:legende/pe:kap_bez/pe:block/@DN"/></td>
</tr>
<tr>
<td><xsl:text>Kurztext</xsl:text></td>
<td><xsl:value-of select="pe:allgemein/pe:legende/pe:kurztext/@V"/></td>
</tr>
<tr>
<td><xsl:text>Langtext</xsl:text></td>
<td><xsl:value-of select="pe:allgemein/pe:legende/pe:langtext/@V"/></td>
</tr>
<tr>
<td><xsl:text>Langtext (Fortsetzung)</xsl:text></td>
<td><xsl:value-of select="pe:allgemein/pe:legende/pe:langtext_continued/@V"/></td>
</tr>
<tr>
<td><xsl:text>Quittungstext</xsl:text></td>
<td><xsl:value-of select="pe:allgemein/pe:legende/pe:quittungstext/@V"/></td>
</tr>
</table>

<h4><xsl:text>Anmerkungen</xsl:text></h4>
<table border="1">
<xsl:for-each select="pe:allgemein/pe:anmerkungen_liste/pe:anmerkung">
<tr>
<td><xsl:value-of select="@V"/></td>
</tr>
</xsl:for-each>
</table>

<h4><xsl:text>Leistungsinhalt</xsl:text></h4>
<table border="1" >
<tr>
<th><xsl:text>Komplex</xsl:text></th>
<th><xsl:text>Leistung</xsl:text></th>
</tr>
<xsl:for-each select="pe:allgemein/pe:leistungsinhalt/pe:komplex">
<tr>
<td><xsl:value-of select="@V"/></td>
<td>
<xsl:for-each select="pe:leistung">
<xsl:value-of select="@V"/>
</xsl:for-each>
</td>
</tr>
</xsl:for-each>
</table>

<h4><xsl:text>Bewertungen</xsl:text></h4>
<table border="1">
<tr>
<th><xsl:text>Bewertung</xsl:text></th>
<th><xsl:text>Einheit</xsl:text></th>
<th><xsl:text>Gebührenordnung</xsl:text></th>
<th><xsl:text>Leistungserbringerart</xsl:text></th>
<th><xsl:text>Leistungstyp</xsl:text></th>
<th><xsl:text>Versorgungsgebiet</xsl:text></th>
</tr>
<xsl:for-each select="pe:allgemein/pe:bewertung_liste/pe:bewertung">
<tr>
<td><xsl:value-of select="@V"/></td>
<td><xsl:value-of select="@U"/></td>
<td><xsl:value-of select="pe:gebuehrenordnung/@V"/></td>
<td><xsl:value-of select="pe:leistungserbringerart/@V"/></td>
<td><xsl:value-of select="pe:leistung_typ/@V"/></td>
<td><xsl:value-of select="pe:versorgungsgebiet/@V"/></td>
</tr>
</xsl:for-each>
</table>

<h4><xsl:text>Zeitbedarfliste</xsl:text></h4>
<table border="1">
<tr>
<th><xsl:text>Zeit</xsl:text></th>
<th><xsl:text>Einheit</xsl:text></th>
<th><xsl:text>Leistungstyp</xsl:text></th>
</tr>
<xsl:for-each select="pe:allgemein/pe:zeitbedarf_liste/pe:zeit">
<tr>
<td><xsl:value-of select="@V"/></td>
<td><xsl:value-of select="@U"/></td>
<td><xsl:value-of select="pe:leistung_typ/@V"/></td>
</tr>
</xsl:for-each>
</table>
</body>
</html>
</xsl:template>
</xsl:stylesheet>
=====================================
THE REQUESTED SAMPLE LOOKUP TABLE FOR TIME UNITS
=====================================
<keytabs>
−
<keytab S="1.2.276.0.76.5.238" SN="S_KBV_ZEITEINHEIT" SV="1.00">
<key V="1" DN="Sekunde" S="1.2.276.0.76.5.238" SV="1.00"/>
<key V="2" DN="Minute" S="1.2.276.0.76.5.238" SV="1.00"/>
<key V="3" DN="Stunde" S="1.2.276.0.76.5.238" SV="1.00"/>
<key V="4" DN="Tag" S="1.2.276.0.76.5.238" SV="1.00"/>
<key V="5" DN="Woche" S="1.2.276.0.76.5.238" SV="1.00"/>
<key V="6" DN="Monat" S="1.2.276.0.76.5.238" SV="1.00"/>
<key V="7" DN="Quartal" S="1.2.276.0.76.5.238" SV="1.00"/>
<key V="8" DN="Jahr" S="1.2.276.0.76.5.238" SV="1.00"/>
</keytab>
</keytabs>
==================================================================================================
And this is, from an earlier trial with XMLTABLE() what I become when stylesheet is commented out. Only for your information here!
Due to the three "Anmerkung" three rows were generated. What is this notation? I got it when
executing the XSQL sheet without stylesheet. Produced by the browser.
I can not find any info in the whole web.
==================================================================================================

<page>
<ROWSET>
<ROW num="1">
<ZIFFER>01700V</ZIFFER>
<GUELTIGKEIT>2006-07-01..</GUELTIGKEIT>
<KAP_NR>1.7</KAP_NR>
<KAP_BEZ>
Gesundheits- und Früherkennungsuntersuchungen, Mutterschaftsvorsorge, Empfängnisregelun g und Schwangerschaftsabbruch (vormals Sonstige Hilfen)
</KAP_BEZ>
<BEREICH_NR>II</BEREICH_NR>
<BEREICH>Arztgruppenübergreifende allgemeine Leistungen</BEREICH>
<KAPITEL_NR>1</KAPITEL_NR>
<KAPITEL>Allgemeine Leistungen</KAPITEL>
<ABSCHNITT>
Gesundheits- und Früherkennungsuntersuchungen, Mutterschaftsvorsorge, Empfängnisregel ung und Schwangerschaftsabbruch (vormals Sonstige Hilfen)
</ABSCHNITT>
<KURZTEXT>
Grundpauschale für Fachärzte für Laboratoriumsmedizin u.a.
</KURZTEXT>
<LANGTEXT>
Grundpauschale für Fachärzte für Laboratoriumsmedizin, Mikrobiologie und Infektionsepidemiologi e, Transfusionsmedizin und ermächtigte Fachwissenschaftler der Medizin für die Erbringung von Laborleistungen gemäß den Richtlinien des Gemeinsamen Bundesauss
</LANGTEXT>
<QUITTUNGSTEXT>
Grundpauschale für Fachärzte für Laboratoriumsmedizin u.a.
</QUITTUNGSTEXT>
<ANMERKUNG>
Die Leistung nach der Nr. 01100 ist nicht berechnungsfähig, wenn Sprechstunden vor 07:00 Uhr oder nach 19:00 Uhr stattfinden oder Patienten zu diesen Zeiten bestellt werden.
</ANMERKUNG>
</ROW>
<ROW num="2">
<ZIFFER>01700V</ZIFFER>
</ROW>
</ROWSET>
</page>

Crash while launching in "building color conversion tables"

Photoshop CS6 crashes while "building color conversion tables" I reinstalled the program but it still hangs up at this point. please help!

I've only seen 3 things that can cause a crash at that point: corrupt profiles (mostly display profiles), corrupt information coming from the OS about the system profiles, and bad floating point units in CPUs.
First thing to check is the display profiles. If setting them to sRGB doesn't solve the crash, it might be a bug in the OS profile cache. And let's hope it isn't the CPU, because those problems are a @$%^@#%# to track down in modern processors.

Searching Records Following the Creation of a Lookup Table

Hello,
Please excuse my ignorance but I have just created a lookup table by using the wizard in SQL Workshop. All is well text has been replaced by numbers. My issue is that when I do a search now using a drop down list based on a query it returns records based on other numbers as well. That is if '2' relates to an item the search picks up anything containing a 2: 2,21,22, etc. How can I get the query to return a value for the number selected and not anything containing that number?
and (
instr(upper("MODEL_ID"),upper(nvl(:P40_REPORT_SEARCH,"MODEL_ID"))) > 0
Kind Regards,
Swelch
Edited by: Steve Welch on Mar 9, 2012 12:03 PM

Here are two potential solutions
and (instr(upper('~'||"MODEL_ID"||'~'),upper(nvl('~'||:P40_REPORT_SEARCH||'~',"MODEL_ID"))) > 0)or
AND model_id = NVL(:P40_REPORT_SEARCH, model_id)The first is often used for components such as shuttles. I think I've added the special characters in the right place - not tested/verified against my previous example
The second may be more appropriate to your scenario, depending on your data.
Scott

Project Server 2010 - create a custom enterprise project field for persons (no text, no lookup table...)

I want to create a custom enterprise project field and would like to use instead of for example a text attribute or a look-up table a field for employees (e.g. project manager) which are coming e.g. from the Active Directory. But when creating this custom
project field I cannot see such an option. What solution do you suggest as I want to avoid that everybody uses different names and spellings for e.g. the project manager and without having to fill the lookup table with all resources of the company.
Thank you so much for your help!

Hi,
Are you using Proejct Server 2007, 2010, 2013?
In case you're working with 2010 version, here is an excellent
blog about how to insert a resource picker in a PDP (project detail page).
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

InDesign CS6 ePub Export : Tables with header and footer in HTML

Hey there,
does anyone know, whether InDesign CS6 also exports Table Headers and footers correctly into the XHTML-File of the ePub.
What I mean, is whether the elements <thead> and <tfoot> are created?
Or is it only possible to steer this via the CSS-Classnames which can be given in the tableformats?
Generally I think it would be better if the user had the chance to map other exporttags to its elements than just p, em, strong, h1-h6.
it would be useful to also put in other elements by hand.
Best regrads.

Magnolee2 wrote:
does anyone know, whether InDesign CS6 also exports Table Headers and footers correctly into the XHTML-File of the ePub.
What I mean, is whether the elements <thead> and <tfoot> are created?
By "also", do you mean the behavior is changed with respect to CS5/CS5.5? In those, thead and tfoot are created correctly. (Although, quite disconcerting, in the order "thead / tfoot / tbody". ePub renderers based on Webkit display them correctly nevertheless, but others do not. An extremely annoying free interpretation of the W3C rules.)

Multiple columns (named the same originally) and mapped to the same lookup table are causing a Cube Build issue

Hey folks, looking for some insight here.
I've an implementation that contains some custom Enterprise columns mapped to lookup tables. In the instance I'm working with now, it looks like there was/is an issue with one of those columns. In this scenario, I have a column named
ProjectType, created initially with that name, mapped to a lookup table. This field's name was then changed to
Project Type. After that, it looks like another column was created, also called
ProjectType. So now, we have what I would have originally thought was two distinct columns, even though the names used are the same.
Below is the error we're currently getting during the Cube Build Process...
PWA:http://ps2010/PWA, ServiceApp:Project Web App, User:DOMAIN\user, PSI: SqlException occurred in DAL: <Error><Class>1</Class><LineNumber>1</LineNumber><Number>4506</Number><Procedure>MSP_EpmProject_OlapView_B8546719-4D4C-473A-84B1-89DEDA2307E0</Procedure>
<Message> System.Data.SqlClient.SqlError: Column names in each view or function must be unique. Column name 'ProjectType' in view or function 'MSP_EpmProject_OlapView_B8546719-4D4C-473A-84B1-89DEDA2307E0' is specified more than once. </Message>
<CallStack>
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.ExecuteStoredProcedureNoResult(String storedProcedureName, SqlParameter[] parameters) </CallStack> </Error>
I've tried deleting the one column, but the build still gives the above error.
Any thoughts as to how the above could be resolved?
Thanks! - M
Michael Mukalian | Jan 2010 - Dec 2010 MVP SharePoint Services | MCTS: MOSS 2007 Configuration | http://www.mukalian.com/blog

We tried taking it out of the cubes, and it builds fine. The challenge we're having is in building the cubes with that custom field "ProjectType". It's as if the cubes still hold some reference to it even when it's deleted.
Since the OLAP View ('MSP_EpmProject_OlapView_{guid}') is recreated, would it be as simple as deleting that View, and trying to recreate?
Thanks - M
Michael Mukalian | Jan 2010 - Dec 2010 MVP SharePoint Services | MCTS: MOSS 2007 Configuration | http://www.mukalian.com/blog

One sequence for multiple lookup tables?

I am sorry if this is off-topic, however can anybody advise what is better - use one sequence for all tables (lookup tables) or to create unique sequence for each table?
Thanks
DanielD

Daniel,
After you read this (http://asktom.oracle.com/pls/ask/f?p=4950:8:::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:2985886242221,), you may be sorry you asked.
Scott

Distortion Correction with Lookup Table

Hello,
I am trying to run an image through lookup tables in order to correct some distortion.
I have two 2D lookup tables "LUTsXnew.raw" and "LUTsYnew.raw" which locate the new (x,y) coordinates that i want to move the pixel intensities from original image "writing_final_D.raw" into the corrected image.
However, Labview takes too much time (12 seconds), if you have some experience with arrays and images can you please have a look at my code and tell me what i am doing wrong?
I am running the same algorithm in C on the same pc and it takes less than 1second.
Thanks,
CK
PS: I am attaching the VI plus the required raw images
Please ignore the resulting image, i just care about speed for the moment
Attachments:
images1.zip ‏287 KB
distortion correction_set pixel1.vi ‏81 KB

CK,
I cannot run your VI because Vision is not supported on my platform. So my comments are general rather than specific.
1. Your while loops can be replaced with for loops because you know the number of iterations in advance.
2. If you transpose the arrays before entering the loops, you can use autoindexing rather than using Index array in the inner loop.
3. If you only update the inner and outer iteration count indicators every 100 iterations you will not have displays that are meaningless to the user using up processor time. Eliminate them completely for the fastest performance.
4. Avoid coercion inside the loops. The IMAQ Set Pixel Value function has coercion dots on three inputs. Doing explicit conversions outside the loops may be faster.
5. The Tick Count functions should be in frames of their own to assure accurate timing.
6. Local variables are not needed and are generally slower than wires.
Lynn
Attachments:
distortion correction_set pixel1.2.vi ‏69 KB

CS6 color lookup tables

Similar Messages

Maybe you are looking for