CS6 Has to Run as Administrator - SOLVED!!

A number of us have had problems with CS6 Beta insisting on running with administrative priviliges. So far, I don't see a solution listed.
My case seems to be the same as others. We are booting from an SSD on which Windows is loaded. We also have a second drive of the old mechanical sort . All programs are loaded on this drive.
Okay, if that's your situation, read on.... My boot SSD is the C: drive and my hard drive is D:. When I installed CS6 Beta, it refused to run until I set it to run as administrator.
I went into Edit -> Settings -> Performance and on the Scratch disk setting, I checked D: and unchecked C:. Aha! That'll fix it. BUT IT DIDN'T!! CS6 still insisted on Administrative priviliges!!
Tonight I went back into the Performance settings and noticed something. You can change the order of the drives. Since the C: drive was unchecked, I naturally assumed Photoshop would skip over it. THAT ASSUMPTION IS WRONG!!
Just for the heck of it, I changed the order of the drives by highlighting the C: drive then going to the right and clicking the down arrow. I then OK'ed that setting, went out of Photoshop and brought up Explorer where I unchecked "Run as Administrator" for Photoshop.exe. Then I rebooted. When I brought up CS6, IT WORKED!! It no longer needed to run as Admin!
Fix it, Adobe!
Gerry Swetsky
PC - Windows 7 Professional 64 bit
8 Gig RAM
Asus GeForce GTX550
OCZ Technology 60 Gig SLD3 SSD
WD 750 Gig SATA III HD

I don't use Bridge, but it (Bridge) seems to be pre-set to run as administrator.
Thank you very much for the link. Adobe needs to know about this problem.
Gerry

Similar Messages

InDesign CS6 will only run "as administrator"

I have Windows 7 on a 32-bit computer. I can only start InDesign CS6 if I "run as administrator." The first problem is that it doesn't remember things like "recently viewed" when the computer is shut down and restarted.
The more serious problem is that the Help doesn't work at all. It just sits there or, if I hunt around, it tells me I have no internet connection.
If I open normally, it gets to the startup page and then says that the program has failed and will be shut down. All files are up to date.
I installed it on a second 32-bit computer (my laptop) and got the same results.
I have no way of knowing if this is related or not, but I cannot "drag" a file onto the open area in InDesign. A circle shows up as a pointer and nothing happens.

See this post: http://technet.microsoft.com/en-us/magazine/ff431742.aspx
It explains the details from Manish's reply, and will atleast get you working.
But this has to do something with the user account. I think that you should check that your account has sufficient privileges that let the software make changes to system files on disc. For example, make sure that the account you're signed into is part of the Administrators group.
Btw, does this also happen with other software as well, or is it just InDesign CS6?

Bridge CS6 Insists on Running as Administrator - PC

Everything worked so well in CS5 Extended......
Windows 7 Pro 64 bit - MSI 990FXA-GD80 Motherboard - AMD Phenom II X6 1100T CPU - nVideo GTX550ti Video
Okay, I have CS6 running on an SSD. Initially with CS6 Beta I found I had to run as Administrator. I eventually discovered how to run as a user by going into Preferences / Performance and setting my scratch disk to my hard drive.
So now I have the CS6 release. I deleted CS6 Beta as instructed and followed directions for the install. CS6 works fine except for the bugs that I reported in the beta forum . My problem is now that Bridge insists on running as Administrator. If I try and run it as a user, it comes up and quits immediately. It doesn't make a wisp of difference where I set my Cache file, SSD or hard drive. I can even deal with that, however now I can't start Bridge from Photoshop! I click on File / Browse in Bridge and nothing happens. If I start Bridge then go to Photoshop and click on File / Browse in Bridge, still nothing happens. I have to manually switch to the Bridge window.
Help!!
Gerry

I think the point of trying to help people find workarounds is that no one here save for the Adobe folks know when they're likely to release that fix.
gswetsky wrote:
it seems the CS6 Beta was released totally as a marketing ploy and not at all to allow us to work with it and report bugs.
When was the Photoshop CS6 beta first made available? The date I recall is March 22, 2012, and that software was actually built from sources on March 5, near as I can tell.
For reference, note the build dates on the files installed as part of the Photoshop CS6 release:
Software preparation for release is normally a pipeline, with engineers working on code, build teams building code into executables and installers, system testers testing builds, beta testers testing potential releases, and customers downloading released code all simultaneously.
I suspect Adobe was expecting to be able to release the Photoshop CS6 they already had built by the time the beta test started, unless any real "show stopper" bugs were found. Bottom line I think is that we can assume none of the customer-reported bugs during the public beta were gauged "show stoppers". I'm pretty sure not everyone sees the crash you're seeing.
There's always pressure to get a release out, even if it's not perfect, as long as some customers can derive value from it... Proceeds from sales can keep the lights on at the factory while the first update is prepared.
We only hope that update makes everything better without making anything worse.
-Noel

Adobe Bridge CS6 has stopped working - has issue been resolved?

Hello.
I am experiencing the above problem with a new install of CS6.
Has this issue been resolved?
CS6 Design and Web Premium installed on Win 7 pro 64 bit Dell Precision laptop. Error with Adobe Bridge cs6: "Adobe Bridge CS6 has stopped working", problem event name "APPCRASH". Error occurs when opening Bridge from Photoshop and other apps (Browse in Bridge) and directly from desktop or start menu. Also a cache directory is not being created under c:\user\<user>\appdata\roaming\adobe\bridge\. Holding ctrl key down and double clicking icon gets same message, cannot get at reset window.
Performed the following with no change: verified Bridge and full suite is on latest version (Bridge=5.0.2.4); created desktop icon directly from bridge.exe; verified application was installed and is starting with administrator privileges; verified latest display driver installed; performed complete uninstall of CS6, CC cleaner tool run, then full reinstall; Error under Event Viewer: faulting application: Bridge.exe and faulting module name: ntdll.dll; disabled UAC; tested memory for damage using MemTest86-good.
Thanks for any help you can provide.

A follow up to the above.
There appears to be a number of possible causes for this type of error. In my case it was somewhat specific. I had a stand alone copy on this same machine previously of Adobe Photoshop CS2 (only) which was completely uninstalled prior to the installation of CS6. There is an issue with Bridge CS6 being installed on a machine that has Bridge CS2 on it. I wasn't aware of Bridge being present with my copy of Photoshop CS2 but apparently there were at least some components of Bridge CS2 left after the uninstall. The workaround that solved the issue for me was the creation of an empty folder:
C:\Users\[your user name]\AppData\Roaming\Adobe\Bridge CS2
For those of you who may have this situation.
Here is where I found the solution (sixth thread down):
Bridge CS6 won't open running on Win7

"Adobe Premiere Pro CS6 has stopped working" but was working fine a week ago...

On my desktop (Dell XPS 8300), I keep getting the error message "Adobe Premiere Pro CS6 has stopped working" when openng up a previously created project or trying to create a new one in Premiere Pro CS6.
On my laptop (MS Surface Pro 2), I can load projects and edit them, but I cannot export media. When I try, it just sits there and does nothing. I've also tried sending it to Media Encoder, but that doesn't help either. Sometimes, it crashes too.
I'm running Windows 8.1 on both with the latest updates installed.
Oddly, this started roughly around the same time on both computers.
I've tried uninstalling and re-installing, but that didn't help.
I've run the Windows troubleshooter and that didn't help either.
I've tried running as an administrator, and running the program in compatibility mode for Windows 8, 7 and Vista - that doesn't solve the issue either.
At this point, I can't do any work and am even considering paying for CC even though I just dropped $700 on CS6 last year, but I'm wondering if that would even solve the issue, or if the CC version would also not work...

>started roughly around the same time on both computers
Most likely cause is a Windows update that changed "something" about the video system
Check the vendor site (NOT Windows update) for a newer video driver
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Adobe Illustrator CS6 has stopped working on Windows 7

I've seen a few posts about this and I stall haven't seen it stop or a fix that works.
I use Illustrator any length of time (up and running just a few minutes till up for weeks on end) and as soon as I quit (either by File -> Exit, the X in the corner or Alt -> F4) it closes panels and after a bit pops up that "Adobe Illustrator CS6 has stoppped working. Microsoft is looking for a solution to this problem."
It saves the recently opened files. All settings seem to save as I don't need to reset them. But of course its worrisome.
Note:
Everything has been unisnstalled and reinstalled 3 times.
All permissions have always looked okay.
I have tried running it as Administrator and still have had it happen
Illustrator has been the only program of all the ones installed to have this issue.
Are there any fixes I've missed? I'm a cloud client so have expected a patch for a while now to come out fixing this, as I've updated Illustrator a few times since starting using CS6.
In looking in logs the constistent error has been:
Faulting application name: Illustrator.exe, version: 16.2.0.723, time stamp: 0x50bb3ee0
Faulting module name: QtCore4.dll_unloaded, version: 0.0.0.0, time stamp: 0x4ffd8608
Exception code: 0xc0000005
Fault offset: 0x000000005b8bb260
Faulting process id: 0x2300
Faulting application start time: 0x01cddd4fcd1f94e0
Faulting application path: C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe
Faulting module path: QtCore4.dll
Report Id: 1dbace71-4943-11e2-ac54-d4bed9d5ae3c

Do you have any other suggestions of other things to look at/try?
Edit: as a note, both Illustrator CS6 64bit and 32bit do this.
And both have same error:
Faulting application name: Illustrator.exe, version: 16.2.0.723, time stamp: 0x50bb3ee0
Faulting module name: QtCore4.dll_unloaded, version: 0.0.0.0, time stamp: 0x4ffd8608
Exception code: 0xc0000005
Fault offset: 0x0000000077e4b260
Faulting process id: 0xbc0
Faulting application start time: 0x01cddf99e30b81dd
Faulting application path: C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe
Faulting module path: QtCore4.dll
Report Id: a65a3986-4dec-11e2-ac37-d4bed9d5ae3c
Faulting application name: Illustrator.exe, version: 16.2.0.723, time stamp: 0x50bb3c14
Faulting module name: QtCore4.dll_unloaded, version: 0.0.0.0, time stamp: 0x4ffa7c8c
Exception code: 0xc0000005
Fault offset: 0x77628ab0
Faulting process id: 0x27fc
Faulting application start time: 0x01cde1fc710ff859
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Illustrator CS6\Support Files\Contents\Windows\Illustrator.exe
Faulting module path: QtCore4.dll
Report Id: f127cdfa-4def-11e2-ac37-d4bed9d5ae3c

"Adobe Media Core CS6 has stopped working" error.

I have had Premiere Elements 11, Photoshop Elements and LR 4 installed for over a year on my Windows 7 computer. Over the last couple months, within a few minutes of turning on my computer I get an error that Adobe Media Core CS6 has stopped working. It seems like this might be related to Premiere but I have not been able to find a solution. This occurs even if I have not run any of my installed programs. Any suggestions what is causing this and how to fix it?

I had not saved the detail files earlier today (it appears they disappear on a restart), but did a shutdown/startup a short time ago and had a recurrence again. (Although two subsequent cycles did not generate the error.) I saved the files and the .xml file indicates the parent process was Elements 11 Organizer this time, not LR4.
I had been living with this problem for a while, one of the set of saved error file sets was from 5/1. I don't recall for sure if that was from the first occurrence of the error, but I decided to look for other programs installed just before that time. I see that Adobe Creative Cloud was installed the day before, 4/30. I don't recall how/why that was installed since I don't have any Cloud products. Also installed on 4/30 were three Microsoft Visual C++ Redistributable files, which show installation times one minute before the Creative Cloud installation, so I assume they are part of the Cloud installation. The next most recent (before 5/1) installed program was Smith Micro Anime Studio Pro 9.5, which was installed on 4/29.
The firewall settings have not changed. I was in a chat with my ISP when the problem occurred this afternoon, but not during the latest occurrence. I don't recall any updates since 6/24. I believe the error had occurred every time I started my computer before the Firewall changes, but it seems to be more sporadic now.
I will see what else I can come up with tomorrow since it is getting late. I wanted to get this all down before I lost my thoughts.
Update 7/5:
I have more information, but still no solution.
I found this thread Adobe Media Core CS6 has stopped working related to the same error, but it had no solution. The error did not occur when I exited PS Elements or Premiere Elements as it did for that person.
I also found Adobe media core cs6 stopped working......??? and tried the steps to rebuild the Photoshop Elements editor preferences file, but no success.
I had noticed that Adobe Creative Cloud was installed the day before, so I uninstalled it. Error still occurred.
I installed a different firewall (Zone Alarm Free) and disabled Windows Defender, error still occurs.
Uninstalled Anime Studio Pro (that had been installed a couple days before, error still occurred.
I will provide more updates as I try more changes.
Update 7/20:
More things I tried:
Repaired quicktime via control panel, did not fix
Uninstalled quicktime, error did not recur
I noticed that there remained a plug-ins folder in the quicktime folder, so I renamed it.
Reinstalled quicktime from Apple site on 7/12 and the CS6 error has not recurred.
Additional info not directly related to original question, but occurred afterwards.
I don't think it is related, but a few days later started getting a small blank MFC CTxfiHlp window upon windows startup. I haven't resolved that yet, but it is related to my Creative XFi sound card.
I also noted when I reinstalled Anime Studio Pro that the readme contains a warning that 64 bit windows does not support quicktime; that I should use the 32 bit version of their software.
I installed the latest Creative sound card software, but started getting lockups. Still working on this, but the original problem seems to be solved.
The only other thing I can think of is that iTunes software had been installed, but I removed it. It is possible that caused a problem with quicktime??
Anyway, the removal of quicktime (including the Plug Ins) and re-install did resolve my problem.

"Run as Administrator" not Elevating/Asking for Password properly

I've got a weird issue on a Windows 7 x64 Professional that was installed and distributed (17 times) by someone else. All request to run with Elevated Rights are completely ignored.
When I try to run Programm Elevated with Rightclick->"Run as Administrator" they are instead started as the User I am currently logged in as. I have to manually relog (logout, login) as Administrator in order to do stuff I normally would do with
"Run as Admin".
There is no UAC question, no Dialog to input the Admins Password/Select the user, no automatic elevation - it just executes as the current user, even if that is a Standart User.
If any process would normally ask for elevated rights (anything marked with the Admin Right Shield thingy in Windows Explorer) it instead runs as normal user and (of course) runs into lack of rights down the road, sooner or later.
Haven't checked how Programms with a Manifest that requires Elevation behave yet, but I guess it is the same.
Parts that might be relevant:
The UAC is disabeled (set to not ask anything/lowest setting)
Two accounts: Admin Type account named "sheriff" (instead of default name) and Standart User Type account "User". The Guest account is disabeled.
While UAC is off, unless I am very mistaken "Run as Administrator" should still work while logged in as a limited Standart User type. After all it has been around a lot longer then the UAC.
Let's talk about MVVM: http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/b1a8bf14-4acd-4d77-9df8-bdb95b02dbe2 Please mark post as helpfull and answers respectively.

Was a while since I posted here and I think I understand the problem a lot better now. Couldn't actually solve my problem (this would require setting the UAC back online wich is explicitly not wanted), but it still might be helpfull for others:
Elevating as Adminsitrator (under Vista and later) needs two Components:
runas - a Commandline Command that has been around since XP and whose sole purpose is to start Programms under other rights then the current user.
In order for it to work the "Secundary Login" Windows Service must be running during Login of the current user. Enabling it or disabling it after a login will have no effect.
And it will fail silently (not telling you it failed).
UAC - normally you need it to surpress the Admin aspect. In my case it was not neded for that from a Security Standpoint. What I have here was a suiteable set of Credentials for Windows XP style Security: limited normal User, Administrator with non-standart
name and password.
What I would have needed from the UAC (and get on all the other Computers where it is online but we still have limited users) was it's ability to detect wich User to elevate too. The UAC is needed to "Find the Admin". And it cannot do that if set to "not inform".
Under XP the "Run as"-Explorer Option was designed to let you select the user. Always.
Under Vista, 7 and 8 it's renamed "Run as Adminsitrator" and the UAC autodetects wich user to Elevate towards. If the UAC is not running the menu Explorer Context Menu Option, the Runas Modifier for .NET Process and Manifests have no idea wich Usercontext they
should run under. And never even try to elevate.
The only way to elevate on such Computers is to relog as Administrator or use Runas on Command Line with explicit naming of the User you want to use.
Let's talk about MVVM: http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/b1a8bf14-4acd-4d77-9df8-bdb95b02dbe2 Please mark post as helpfull and answers respectively.

My computer has been running "dial up" slow since the last update of Fire Fox. Is there any connection?

My computer was just updated to a higher speed connection and was doing good speed wise even before. Now it takes forever to load or navigate in all capacities, that is until I got to this site and I can click as fast as I can here and there is no slow down. Will go back to my home page and see how bad it is there. My wife has a Mac laptop and she even said that since the new update, Fire Fox has been running a little weird concerning the opening of a new window unexpectedly. Really want to see if there is anyone else that might be having similar issues with their computers after the new update.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Audition CS6 won't run anymore

My version of CS6 used to run perfectly until I used Malwarebytes, which removed amtlib.dll
Now it won't run at all, even though I've put amtlib.dll back. I keep on getting the 0xc000007b error, and I can't uninstall the program at all. What do I do to fix this problem? It's extremely frustrating. Nothing I have done has fixed this, and I've tried many times to remove it, such as command prompt, the windows uninstaller (it doesn't show up), and multiple programs such as ccleaner.

If Ryclark's suggestion still doesn't work I would strongly recommend finding and downloading the free version of Revo Uninstaller, from Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall probl… The Pro version can be used for 30 days as a trial; speaking personally I think it's well worth the money! The Portable version is especially useful to keep on a pen drive; you can then use it on any computer.
I've needed to use it on more than one occasion when faced with similar problems (a program that is now "corrupted" but cannot be uninstalled by any standard method). If Audition is not listed as installed when you run Revo, use the Forced Uninstall mode and simply point it to the folder where AA currently is.
One word of caution: Revo Pro creates a full back of your registry etc., before beginning the uninstall routine. I don't think the free version does, so do create a System restore point before running it.
HTH
Jeff

Standard users forced default "run as administrator" for acrobat.exe X pro

The software has been reinstalled and patched CS6 all componets of CS6 run fine under a standard user account with the exception of Acrobat Pro. Acrobat Pro runs fine when an administrator is logged in BUT when a standard user logs into the computer all application shortcuts and even direct execution of the exe insists on "running as administrator", seeing as though they are not an administrator they can not run Acrobat Pro X. Any assistance would be grealtly appreciate.

I'm not saying Norton is your problem, but I haven't heard good things about Norton software in a long time, unfortunately.
I always recommend Avast! antivirus to people. The free version is very good in itself, and they offer a more comprehensive Internet Security version as well.
I don't know how technically-oriented you are, but if you do understand how things work fairly well and have taken measures and adopted good practices to avoid running malware, there is the possibility of just shutting off UAC (MIcrosoft User Account Control) if its operation continually gets in the way of your completing your work. Typically, most people just get in the habit of confirming whatever prompts come up anyway, which defeats most of the protection UAC can afford.
-Noel

My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for maintenance.

My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for a maintenance reinstall. I presume I'd have to download Yosemite again, though I'd be happy just using Snow Leopard again too.
Thanks for the help.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Blackberry Media Sync Failed To Initialize - Run With Administrative Privileges

I've downloaded the Blackberry Desktop Manager (4.7) and everything works fine except for the Blackberry Media Sync which fails to initialize and needs to be run with administrative privileges. Anyone experience this and how did you correct the administrative privileges situation. I am using a BB Bold. TYIA

BlackBerry Media Sync has just been updated to version 2.0.
I suggest you download it and see if the issue is solved.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

FileVault2 has been running for a week. No estimated time of ending.

I have a 2011 MacBook Pro. 2 GHz i7 processor; 4 GB Memory; Using Yosemite 10.10
Last week, I downloaded Yosemite and enabled FileVault2 without knowing what it fully was. The program has been running for a week. I left my computer alone for most of this time per advice in other threads but everytime I try and check on the progress, the status bar says it's still trying to "estimate time remaining." My computer will not allow me to turn FileVault off. Any way I can make my computer faster in the process or turn off FileVault? I know it'll need to decrypt everything if I turn it off but with no possible end in sight, I'm worried something is wrong.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

I am trying to use macro express and adobe acrobat 9 profession keeps shutting down, why is this happening? I tried to run as administrator already as well on both Macro Express and in Adobe and it still keeps shutting down.

I am trying to use macro express and adobe acrobat 9 profession keeps shutting down, why is this happening? I tried to run as administrator already as well on both Macro Express and in Adobe and it still keeps shutting down.

same problem, it's been happening to me for a week or two now i'm thinking about backing up my documents and just wiping it completely, see if that works. Has anyone else tried this? I'm loosing time and have already lost a good few hours of work as it just crashes randomly. need help!!!
- saving these threads on my favourites cause i'm about to crash . . .

CS6 Has to Run as Administrator - SOLVED!!

Similar Messages

Maybe you are looking for