Standard users forced default "run as administrator" for acrobat.exe X pro

The software has been reinstalled and patched CS6 all componets of CS6 run fine under a standard user account with the exception of Acrobat Pro.  Acrobat Pro runs fine when an administrator is logged in BUT when a standard user logs into the computer all application shortcuts and even direct execution of the exe insists on "running as administrator", seeing as though they are not an administrator they can not run Acrobat Pro X.  Any assistance would be grealtly appreciate.

I'm not saying Norton is your problem, but I haven't heard good things about Norton software in a long time, unfortunately.
I always recommend Avast! antivirus to people.  The free version is very good in itself, and they offer a more comprehensive Internet Security version as well.
I don't know how technically-oriented you are, but if you do understand how things work fairly well and have taken measures and adopted good practices to avoid running malware, there is the possibility of just shutting off UAC (MIcrosoft User Account Control) if its operation continually gets in the way of your completing your work.  Typically, most people just get in the habit of confirming whatever prompts come up anyway, which defeats most of the protection UAC can afford.
-Noel

Similar Messages

  • Windows 7 Elevating using UAC, does not change the standard users setting, it runs the Admins settings

    When elevating privilege for a standard user using an admin account, the UAC runs the application under the admins account "user" and not the standard users account "user", the problem is that doing so, it does not change the standard
    users settings
    In this example, trying to change the "Check for Updates Automatically" as the standard user, is grayed out, you have to be an admin to change this. This is a design of Java.
    When you right click and run as an administrator, the option is no longer grayed out and can be deselected, however, this only changes that setting for the admins specific "user", not the standard users specific "user" the admin is elevating
    privilege for. as illustrated below.
    Is there a work around for an admin to run his credentials but elevate the standard users session instead of his own or some other way to set the standard users setting when admin credentials are required?

    Hi,
    Based on your description, I understand that you want to disable
    Check for Updates Automatically option for standard users in Java.
    You can achieve this target by editing
    EnableJavaUpdate registry entry. For more details, please refer to following articles and check if can help you.
    (Please back up before that registry operation. That will help us to avoid unexpected issues.)
    How to disable Java Update in Windows
    7
    Disable Java updates with
    Group Policy
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    However, this issue is related to Java product. I suggest that you should contact with Java product support.
    I believe we will get a better assistance there.
    If anything I misunderstand or any update, please don’t hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • LEID for Acrobat DC Std/Pro

    Hi everybody,
    my question is in the topic. Can anyone give me the LEID for Acrobat DC Standard and Pro?
    The lines are still empty here:
    Identifying Existing Installs — Enterprise Administration Guide
    Thanks!
    Robert

    Hi Robert ,
    I have attached the screen shot for the LIED' for Acrobat DC .This is what are you looking for I suppose that is not visible at your end .Is that correct .
    Please have a look .
    Also ,go through the note mentioned at the top of the screen shot .Hope this will solve the purpose .
    Regards
    Sukrit Dhingra

  • Mac User Cannot Use Form Created in Windows Acrobat 9.0 Pro

    I have created a form and emailed it to a Mac user.  He does not know what version of Acrobat he has or even if he is using a full version of Acrobat or Acrobat Reader (I tried to walk him through to check his version, but he could not find it).
    He is using a laptop that is about 5 years old.
    Anyway....I created this form in Acrobat 9.0 Pro.  It works great for me...when I type in the fields, the text falls perfectly on the lines; the autocalculate works perfectly, and the RESET button works perfectly.  When he opens the file, the text shows all below the lines, the autocalculate does not work at all, and neither does the RESET button.  He sent it to another person, and they too could not use the form.
    I have enabled the PDF so it can be filled out by Reader users and it is not in PDF/A mode, but it still is not working for him.  I went to the library where they have a Mac and I was able to open it through Acrobat Reader 9 and again, I was able to fill the form out and it worked perfectly for me.
    Would anyone be available (with a Mac) through email so I could send you the file to see if any Acrobat pros might be able to tell me what is wrong with it?  I am absolutely frustrated to the points of tears over this.  If you do not want to place your email here, I will give you mine so you can email me first ([email protected]); just let me know here that you are emailing me so I know to check email rather than check here.
    Thank you!
    Laura

    He's probably not using either Acrobat or Reader. The Mac comes with a built-in PDF viewer named Preview and it has limited support for PDF forms. It even corrupts them when it saves. It should definitely be avoided. Fortunately Reader is freely available, you just have to get him to install it.

  • How do I Install a PDF Printer Manually for Acrobat 6.0 Pro

    My PDF Printer disappeared from my printer list. How can I manually re-install it? I tried following the directions given to another user for Acrobat 10.0 in this forum but was not successful with my 6.0 version. Can anyone help please? I really need my PDF Printer.

    A repair can be done from the Help>Repair menu (at least I think that AA6 can do that). Sometimes the repair can be done from the Add/Remove Programs in the Control Panel, but you may need the CD in this case. You might also try just updating AA6 (now at 6.0.6) either from the help menu or by downloading the updates from http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows (similar for MAC). For the downloads, be sure to install them in order and probably disable antivirus during the updates. You generally do not have to reboot until you have completed all of the updates.

  • We need the installer for Acrobat 7.0 Pro Mac

    We downloaded the installers for Creative Suite 2 since the activation servers had been shut down. However, I cannot find the installer for Acrobat Professional that came with the Premium Suite.

    Ok sorry it has been quite awhile since CS2 was released.  If Acrobat 7 has a separate serial number then please use your original installation media.  If it doesn't have a separate serial number then everything you need is contained in the install files available at the link in message #1.
    Have you tried installing what you have already downloaded?  What version of Mac OS are you using?  Do you have a PowerPC equipped Macintosh?

  • QA10 User Exit to run addational code for Material Backflush

    Does anyone know if there is a User Exit for QA10 Automatic Usage Decision that will allow you to tack on additional code to complete a material backflush.  I have a batchjob that runs every 5 minutes which fires off a variant to evaluate the Inspection Results.  If all results recording are good the UD gets completed and the material is moved from QI Stock to Unrestricted.  At the same time once the UD and stock transfer is done I would like to run a User exit that will allow me to access a custom lookup table to change the material from CP14.B1 to CP14 and complete a backflush.

    Yes you are correct in saying that I want to do another Backflush once the auto UD is completed.  The scheduled job using program RQEVAI30 completes the UD and posts the material from QI Stock to Unrestricted Stock if results are good.  Once the UD is completed and the stock is posted to Unrestricted I need to find a User Exit that will allow me to write custom code to do a table lookup.  This table will also be custom development that we can use to say if material is CP14.B1 and the Insp. Lot Type is 04 then run MFBF to backflush raw material and complete movement type 309 to CP14 Material.  I just need to know if there is a User exit available that I can use once the lot evaluation is completed.

  • Standard User Lic upgrade to Professional Lic for CUMA

    Hi NetPro.
    my company is going to purchase CUMA server , however my current user lic which all in Stand only. however, i am thinking to upgrade them to Professional in order to use the feature of CUMA . however, i am stucked in the Dynamic Tool generator as i can't just generate the Lic from Std to Pro.
    Appreciate your guidance .
    Regards.
    Kitten

    Hi Ron, this is pretty strange, no idea how gMail turned into MobileMe accounts, but that info is in the main .plist
    /Users/YourUserName/Library/Preferences/com.apple.mail.plist
    MobileMe is gone, but Mobileme addies work on iCloud.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
        •    Server name: imap.mail.me.com
        •    SSL Required: Yes
        •    Port: 993
        •    Username: [email protected] (use your @me.com address from your iCloud account)
        •    Password: Your iCloud password
    SMTP (outgoing mail server) information:
        •    Server name: smtp.mail.me.com
        •    SSL Required: Yes
        •    Port: 587
        •    SMTP Authentication Required: Yes
        •    Username: [email protected] (use your @me.com address from your iCloud account)
        •    Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • I can't access "Device Manager" "MMC" "CMD run as administrator" and some .exe files

    <p><img alt="" src="https://social.technet.microsoft.com/Forums/getfile/560661" /></p>
    <p><img alt="" src="https://social.technet.microsoft.com/Forums/getfile/560666" /></p>
    I need help! I am in hurry.

    Hi,
    Sorry for my delay.
    Based on your description, I’m a little confused with your issue. Would you please let me know more details
    of this issue? Thanks for your understanding.
    Would you please let me know OS edition information of this problematic server? Did you logon the server via
    an administrator account? Meanwhile, would you please let me know the complete error message when access Device Manager, MMC or other .exe files?
    For CMD, please open Task Manager, click File and select
    Run new task. Then type CMD and select Create this task with administrative privileges option in
    Create new task wizard. Will you still encounter issue?
    By the way, I type above links which you provided in IE. However, I can only find
    Page Not Found error. You can upload screenshots to
    OneDrive and then post link here. (Please hide all protected or private information)
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Printing Properties for Acrobat 8.0 Pro not sticking

    Hi guys & gals,
    I have a user here that is running Windows 7 that has been having an issue with printing from Acrobat 8.0 Professional for some time and while it's not a huge issue, it is a bit annoying.
    Here's the scenario:
    She opens a PDF file, clicks on Print, selects the printer she wants to print to and clicks on "properties" to change it from say, 8.5"x11" to 11'x17" paper size, then she clicks "OK" which returns her to the main print window only to see that it still shows the original paper size. If she clicks "Properties" a 2nd time and changes the paper size again and hits OK then everything is fine until the next time she goes to print something and she has to go through changing the print properties twice again to get the settings to stick.
    It's not clear if this is an Acrobat issue or a Windows issue. Does anyone have any insights as to what might be going on here?
    Thanks!

    Hi Daniel,
    Thanks for the suggestions, but that didn't help. And yes Acrobat is updated and I even tried the "Repair Acrobat Installation" option all to no avail. 3 of us have looked into this issue and decided there is no fix. It's just something the user will have to live with. Oh and 1 correction, the computer is running Vista, not W7, however I don't think Vista is any worse at handling printing than 7 is, and since this happens regardless of if we print with the Postscript driver or the PCL6 driver, it's gotta be an Acrobat issue, not a Windows issue. Also just going into the list of printers and reselecting the already selected printer seems to also jolt it into suddenly showing the correct (changed) settings. Weird.

  • Need download for Acrobat 6.0 Pro Upgrade

    I'm using Acrobat 9 on my new computer but still use the old 6.0 on old one.  I just updated the old one and it says my download file is corrupt when I go to install on the "newer" system.  The product is shown as active on my Adobe account but I can't find a download link anywhere.  Thx.

    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • CS6 Has to Run as Administrator - SOLVED!!

    A number of us have had problems with CS6 Beta insisting on running with administrative priviliges.  So far, I don't see a solution listed.
    My case seems to be the same as others.  We are booting from an SSD on which Windows is loaded.  We also have a second drive of the old mechanical sort .  All programs are loaded on this drive.
    Okay, if that's your situation, read on....  My boot SSD is the C: drive and my hard drive is D:.  When I installed CS6 Beta, it refused to run until I set it to run as administrator.
    I went into Edit -> Settings -> Performance and on the Scratch disk setting, I checked D: and unchecked C:.  Aha!  That'll fix it.  BUT IT DIDN'T!!  CS6 still insisted on Administrative priviliges!!
    Tonight I went back into the Performance settings and noticed something.  You can change the order of the drives.  Since the C: drive was unchecked, I naturally assumed Photoshop would skip over it.  THAT ASSUMPTION IS WRONG!!
    Just for the heck of it, I changed the order of the drives by highlighting the C: drive then going to the right and clicking the down arrow.  I then OK'ed that setting, went out of Photoshop and brought up Explorer where I unchecked "Run as Administrator" for Photoshop.exe.  Then I rebooted.  When I brought up CS6, IT WORKED!!  It no longer needed to run as Admin!
    Fix it, Adobe!
    Gerry Swetsky
    PC - Windows 7 Professional 64 bit
    8 Gig RAM
    Asus GeForce GTX550
    OCZ Technology 60 Gig SLD3 SSD
    WD 750 Gig SATA III HD

    I don't use Bridge, but it (Bridge) seems to be pre-set to run as administrator.
    Thank you very much for the link.  Adobe needs to know about this problem.
    Gerry

  • Running under a standard user in windows 7

    We just bought Photoshop Elements 13 and when the user tries to run the program it run really slow and freezes quite a bit. This user is a standard user in Windows 7 no Administrative rights. If you right-click the icon and choose Run As Administrator it then runs like it is intended to. We don't allow our users to run as Admin so I need a fix for this. The only other thing I am wondering is that the computer is in a Active Directory Domain environment and we push our Group Policies to our systems. One of the policies redirects the users folders to a server share so the My Documents, My Photos, etc. are actually on the server drive not the local drive. Is that part of the problem? 
    Any insight would be awesome!
    Thanks,
    -Scott

    I agree with Erland.
    SQL Service account is used while performing any OS level operation by SQL Server process (sqlservr.exe). On the other hand, the account which is connecting to SQL Server will have it's own permission in Server/Database provided via Logins/Users.
    Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
    This posting is provided "AS IS" with no warranties, and confers no rights.
    My Blog |
    Team Blog | @Twitter
    Author: SQL Server 2012 AlwaysOn -
    Paperback, Kindle

  • Finder is not available for standard user

    Hi,
    I recently installed OS X (10.8.2) from app store. We created "Data" folder and created few admin and non admin users. Granted access to both users to same folder. When admin logged off and standard user logged in, he could not find Finder. Repeated this with 8 standard users and Finder is not available for all 8 standard users. For 2 admin users Finder is available.
    We did not change any settings whatsoever, so not sure this behavier is by design or I am missing something.
    Please help
    Thanks in advance.

    Are you running OS X 10.8 client or Server (is Server.app installed)? If you are using OS X Server, are these local accounts or network accounts?
    What do you mean by "could not find Finder?" As in could not log in? Could not access this 'Data' folder in Finder?

  • Trying to update to firefox 7.0 when press "run" it ask for administrator's password and will not let me go further. Please advise

    Download Firefox 7.0 (currently running out of date version)
    Click to open file
    Click Run to start running file
    Ask for Admin password
    Will not go further into installing
    Please advise.

    Once I downloaded the update, I was unable to right click "run as administrator" from the exe file. How I was finally able to update to the newest version was to:
    * click the start menu
    * click search
    * type in firefox
    * scroll down to Firefox setup 7.0.1.exe
    * right click and select 'run as administrator'
    The rest was 'easy as pie'. Hope this helps those that had the same trouble I did.

Maybe you are looking for